Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Ralink 5370 USB WIFI dongle can't connect.[SOLVED]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Martux
Veteran
Veteran


Joined: 04 Feb 2005
Posts: 1710
Location: Mannheim, Germany

PostPosted: Sat Jul 13, 2013 12:48 pm    Post subject: Ralink 5370 USB WIFI dongle can't connect.[SOLVED] Reply with quote

Hi guys!
Have bought the above mentioned USB wifi dongle but having issues.
My system is all ~amd64, all packages up to date. Using networkmanager for the connections.
My kernel config is exactly as suggested here: https://forums.gentoo.org/viewtopic-t-953924-start-0.html
Also the firmware is being loaded.
Networkmanager is showing as connected for a short moment, but then switches to offline soon after.
Here is what the syslog says. Any suggestions appreciated!
Code:

Jul 13 01:33:34 aumakua NetworkManager[3063]: <info> Activation (wlan0/wireless): connection 'My Network Totoro' has security, and secrets exist.  No new secrets needed.
Jul 13 01:33:34 aumakua NetworkManager[3063]: <info> Config: added 'ssid' value 'My Network Totoro'
Jul 13 01:33:34 aumakua NetworkManager[3063]: <info> Config: added 'scan_ssid' value '1'
Jul 13 01:33:34 aumakua NetworkManager[3063]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jul 13 01:33:34 aumakua NetworkManager[3063]: <info> Config: added 'psk' value '<omitted>'
Jul 13 01:33:34 aumakua NetworkManager[3063]: <info> Config: added 'proto' value 'WPA RSN'
Jul 13 01:33:34 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jul 13 01:33:34 aumakua NetworkManager[3063]: <info> Config: set interface ap_scan to 1
Jul 13 01:33:34 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jul 13 01:33:35 aumakua kernel: [  219.501082] wlan0: authenticate with bc:05:43:94:91:2a
Jul 13 01:33:35 aumakua kernel: [  219.525033] wlan0: send auth to bc:05:43:94:91:2a (try 1/3)
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jul 13 01:33:35 aumakua kernel: [  219.526698] wlan0: authenticated
Jul 13 01:33:35 aumakua kernel: [  219.527656] wlan0: associate with bc:05:43:94:91:2a (try 1/3)
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jul 13 01:33:35 aumakua kernel: [  219.532933] wlan0: RX AssocResp from bc:05:43:94:91:2a (capab=0x431 status=0 aid=2)
Jul 13 01:33:35 aumakua kernel: [  219.539669] wlan0: associated
Jul 13 01:33:35 aumakua kernel: [  219.539729] cfg80211: Calling CRDA for country: DE
Jul 13 01:33:35 aumakua kernel: [  219.543184] cfg80211: Regulatory domain changed to country: DE
Jul 13 01:33:35 aumakua kernel: [  219.543191] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 13 01:33:35 aumakua kernel: [  219.543196] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 13 01:33:35 aumakua kernel: [  219.543199] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 13 01:33:35 aumakua kernel: [  219.543202] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 13 01:33:35 aumakua kernel: [  219.543205] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
Jul 13 01:33:35 aumakua kernel: [  219.543209] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: associating -> 4-way handshake
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'My Network Totoro'.
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jul 13 01:33:35 aumakua NetworkManager[3063]: client_start: assertion `priv->client_type != 0' failed
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> (wlan0): device state change: ip-config -> failed (reason 'dhcp-start-failed') [70 120 15]
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> Marking connection 'My Network Totoro' invalid.
Jul 13 01:33:35 aumakua NetworkManager[3063]: <warn> Activation (wlan0) failed for connection 'My Network Totoro'
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> (wlan0): deactivating device (reason 'none') [0]
Jul 13 01:33:35 aumakua kernel: [  219.553520] wlan0: deauthenticating from bc:05:43:94:91:2a by local choice (reason=3)
Jul 13 01:33:35 aumakua NetworkManager[3063]: <warn> Connection disconnected (reason -3)
Jul 13 01:33:35 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jul 13 01:33:35 aumakua NetworkManager[3063]: <warn> Connection disconnected (reason -3)
Jul 13 01:33:35 aumakua kernel: [  219.589231] cfg80211: Calling CRDA to update world regulatory domain
Jul 13 01:33:35 aumakua kernel: [  219.591425] cfg80211: World regulatory domain updated:
Jul 13 01:33:35 aumakua kernel: [  219.591428] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 13 01:33:35 aumakua kernel: [  219.591430] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 01:33:35 aumakua kernel: [  219.591431] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 01:33:35 aumakua kernel: [  219.591433] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 13 01:33:35 aumakua kernel: [  219.591434] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 01:33:35 aumakua kernel: [  219.591435] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 01:33:40 aumakua kernel: [  224.218971] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 0
Jul 13 01:33:40 aumakua kernel: [  224.218983] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 0
Jul 13 01:33:40 aumakua kernel: [  224.218991] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 0
Jul 13 01:33:40 aumakua kernel: [  224.218998] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 0
Jul 13 01:33:40 aumakua kernel: [  224.219005] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 0
Jul 13 01:33:40 aumakua kernel: [  224.219012] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 0
Jul 13 01:33:40 aumakua kernel: [  224.219017] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 0
Jul 13 01:33:40 aumakua kernel: [  224.219059] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 13 01:33:40 aumakua kernel: [  224.219213] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 13 01:33:40 aumakua kernel: [  224.219314] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 13 01:33:40 aumakua kernel: [  224.219435] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 13 01:33:40 aumakua kernel: [  224.219563] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 13 01:33:40 aumakua kernel: [  224.219688] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 13 01:33:40 aumakua kernel: [  224.219840] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) starting connection 'My Network Totoro'
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0/wireless): access point 'My Network Totoro' has security, but secrets are required.
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0/wireless): connection 'My Network Totoro' has security, and secrets exist.  No new secrets needed.
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Config: added 'ssid' value 'My Network Totoro'
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Config: added 'scan_ssid' value '1'
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Config: added 'psk' value '<omitted>'
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Config: added 'proto' value 'WPA RSN'
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> Config: set interface ap_scan to 1
Jul 13 01:33:52 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jul 13 01:33:53 aumakua kernel: [  237.464025] wlan0: authenticate with bc:05:43:94:91:2a
Jul 13 01:33:53 aumakua kernel: [  237.487926] wlan0: send auth to bc:05:43:94:91:2a (try 1/3)
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jul 13 01:33:53 aumakua kernel: [  237.589625] wlan0: send auth to bc:05:43:94:91:2a (try 2/3)
Jul 13 01:33:53 aumakua kernel: [  237.591401] wlan0: authenticated
Jul 13 01:33:53 aumakua kernel: [  237.592646] wlan0: associate with bc:05:43:94:91:2a (try 1/3)
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jul 13 01:33:53 aumakua kernel: [  237.597947] wlan0: RX AssocResp from bc:05:43:94:91:2a (capab=0x431 status=0 aid=2)
Jul 13 01:33:53 aumakua kernel: [  237.605028] wlan0: associated
Jul 13 01:33:53 aumakua kernel: [  237.605087] cfg80211: Calling CRDA for country: DE
Jul 13 01:33:53 aumakua kernel: [  237.608525] cfg80211: Regulatory domain changed to country: DE
Jul 13 01:33:53 aumakua kernel: [  237.608532] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 13 01:33:53 aumakua kernel: [  237.608536] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 13 01:33:53 aumakua kernel: [  237.608540] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 13 01:33:53 aumakua kernel: [  237.608543] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 13 01:33:53 aumakua kernel: [  237.608546] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
Jul 13 01:33:53 aumakua kernel: [  237.608549] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: associating -> 4-way handshake
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'My Network Totoro'.
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jul 13 01:33:53 aumakua NetworkManager[3063]: client_start: assertion `priv->client_type != 0' failed
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> (wlan0): device state change: ip-config -> failed (reason 'dhcp-start-failed') [70 120 15]
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> Marking connection 'My Network Totoro' invalid.
Jul 13 01:33:53 aumakua NetworkManager[3063]: <warn> Activation (wlan0) failed for connection 'My Network Totoro'
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> (wlan0): deactivating device (reason 'none') [0]
Jul 13 01:33:53 aumakua kernel: [  237.621337] wlan0: deauthenticating from bc:05:43:94:91:2a by local choice (reason=3)
Jul 13 01:33:53 aumakua NetworkManager[3063]: <warn> Connection disconnected (reason -3)
Jul 13 01:33:53 aumakua NetworkManager[3063]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jul 13 01:33:53 aumakua NetworkManager[3063]: <warn> Connection disconnected (reason -3)
Jul 13 01:33:53 aumakua kernel: [  237.659516] cfg80211: Calling CRDA to update world regulatory domain
Jul 13 01:33:53 aumakua kernel: [  237.660470] cfg80211: World regulatory domain updated:
Jul 13 01:33:53 aumakua kernel: [  237.660472] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 13 01:33:53 aumakua kernel: [  237.660473] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 01:33:53 aumakua kernel: [  237.660475] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 01:33:53 aumakua kernel: [  237.660476] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 13 01:33:53 aumakua kernel: [  237.660477] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 13 01:33:53 aumakua kernel: [  237.660478] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

_________________
"Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction"


Last edited by Martux on Fri Jul 19, 2013 7:19 pm; edited 1 time in total
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6251
Location: Goose Creek SC

PostPosted: Sat Jul 13, 2013 8:38 pm    Post subject: Reply with quote

do you have dhcpcd in a runlevel?
Code:
rc-update show

do you have any /etc/init.d/net.interface name files other than net.lo?
Code:
 ls -l  /etc/init.d/net.*

if any answer is yes, get rid of them.
when you get the failure is dhcpcd running?
Code:
rc-status
dhcpcd wlan0

_________________
Defund the FCC.
Back to top
View user's profile Send private message
Martux
Veteran
Veteran


Joined: 04 Feb 2005
Posts: 1710
Location: Mannheim, Germany

PostPosted: Sat Jul 13, 2013 10:24 pm    Post subject: Reply with quote

Hello!
The failure was without dhcpcd. Enabling it doesn't make much difference, only that the networkmanager applet in KDE switches on/off several times.
There are no more interfaces under /etc/init.d. Only "net" which seems to be auto-generated by Networkmanager.
_________________
"Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction"
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6251
Location: Goose Creek SC

PostPosted: Sat Jul 13, 2013 10:46 pm    Post subject: Reply with quote

do you use networkmanagement or nm-applet to configure the network?
you have emerged wpa_supplicant and it is not in a run level? wpa_supplicant should be using the nl80211 driver though this nic will work with wext if wext kernel support is enabled.
you should have /etc/init.d/net.lo

https://forums.gentoo.org/viewtopic-t-928808-start-0.html may help

what kernel version are you on?
Code:
uname -a

_________________
Defund the FCC.
Back to top
View user's profile Send private message
Martux
Veteran
Veteran


Joined: 04 Feb 2005
Posts: 1710
Location: Mannheim, Germany

PostPosted: Sun Jul 14, 2013 8:24 am    Post subject: Reply with quote

Thanks for your input. I tried all the solutions from the above given thread. None fixed it for me.
First, I removed everything from /etc/init.d and cleared the runlevels. Only Networkmanager running.
After that gave no success, I manually started dhcpcd and restarted Networmanager again. Still nothing.
Below is what dmesg shows:
Code:

Jul 14 11:16:04 aumakua NetworkManager[3072]: <info> (wlan0): supplicant interface state: disconnected -> inactive
Jul 14 11:16:05 aumakua /etc/init.d/NetworkManager[3041]: WARNING: NetworkManager has started, but is inactive
Jul 14 11:16:40 aumakua acpid: client 2594[0:0] has disconnected
Jul 14 11:16:41 aumakua acpid: client connected from 2594[0:0]
Jul 14 11:16:41 aumakua acpid: 1 client rule loaded
Jul 14 11:16:47 aumakua dhcpcd[3118]: version 6.0.2 starting
Jul 14 11:16:47 aumakua dhcpcd[3118]: dummy0: soliciting a DHCP lease
Jul 14 11:16:47 aumakua dhcpcd[3118]: wlan0: waiting for carrier
Jul 14 11:17:17 aumakua dhcpcd[3118]: timed out
Jul 14 11:17:17 aumakua dhcpcd[3118]: allowing 8 seconds for IPv4LL timeout
Jul 14 11:17:25 aumakua dhcpcd[3118]: timed out
Jul 14 11:17:25 aumakua dhcpcd[3118]: forked to background, child pid 3157
Jul 14 11:17:29 aumakua NetworkManager[3072]: <info> caught signal 15, shutting down normally.
Jul 14 11:17:29 aumakua NetworkManager[3072]: <info> (wlan0): device state change: disconnected -> unmanaged (reason 'removed') [30 10 36]
Jul 14 11:17:29 aumakua NetworkManager[3072]: <info> (wlan0): cleaning up...
Jul 14 11:17:29 aumakua NetworkManager[3072]: <info> (wlan0): taking down device.
Jul 14 11:17:29 aumakua NetworkManager[3072]: <info> exiting (success)
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> NetworkManager (version 0.9.8.2) is starting...
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> WEXT support is enabled
Jul 14 11:17:29 aumakua dbus[2308]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
Jul 14 11:17:29 aumakua dbus[2308]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
Jul 14 11:17:29 aumakua NetworkManager[3192]:    SCPlugin-Ifnet: Initializing!
Jul 14 11:17:29 aumakua NetworkManager[3192]:    SCPlugin-Ifnet: management mode: managed
Jul 14 11:17:29 aumakua NetworkManager[3192]:    SCPlugin-Ifnet: Loading connections
Jul 14 11:17:29 aumakua NetworkManager[3192]:    SCPlugin-Ifnet: Hostname updated to: aumakua
Jul 14 11:17:29 aumakua NetworkManager[3192]:    SCPlugin-Ifnet: Initialzation complete!
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> Loaded plugin ifnet: (C) 1999-2010 Gentoo Foundation, Inc. To report bugs please use bugs.gentoo.org with [networkmanager] or [qiaomuf] prefix.
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Jul 14 11:17:29 aumakua NetworkManager[3192]:    SCPlugin-Ifnet: getting unmanaged specs...
Jul 14 11:17:29 aumakua NetworkManager[3192]:    SCPlugin-Ifnet: (-1275050432) ... get_connections.
Jul 14 11:17:29 aumakua NetworkManager[3192]:    SCPlugin-Ifnet: (-1275050432) connections count: 0
Jul 14 11:17:29 aumakua NetworkManager[3192]:    keyfile: parsing My Network Totoro ...
Jul 14 11:17:29 aumakua NetworkManager[3192]:    keyfile:     read connection 'My Network Totoro'
Jul 14 11:17:29 aumakua NetworkManager[3192]:    keyfile: parsing .keep_net-misc_networkmanager-0 ...
Jul 14 11:17:29 aumakua NetworkManager[3192]: Connection failed to verify: (unknown)
Jul 14 11:17:29 aumakua NetworkManager[3192]:    keyfile:     error: invalid or missing connection property '(null)/connection setting not found'
Jul 14 11:17:29 aumakua NetworkManager[3192]:    SCPlugin-Ifnet: getting unmanaged specs...
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> monitoring kernel firmware directory '/lib/firmware'.
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/ieee80211/phy0/rfkill0) (driver rt2800usb)
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> WiFi hardware radio set enabled
Jul 14 11:17:29 aumakua NetworkManager[3192]: <warn> No usable DHCP client found! DHCP configurations will fail.
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> WiFi enabled by radio killswitch; enabled by state file
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> WWAN enabled by radio killswitch; enabled by state file
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> WiMAX enabled by radio killswitch; enabled by state file
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> Networking is enabled by state file
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): using nl80211 for WiFi device control
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): driver supports Access Point (AP) mode
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2800usb' ifindex: 3)
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): bringing up device.
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): preparing device.
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jul 14 11:17:29 aumakua NetworkManager[3192]: <warn> /sys/devices/virtual/net/dummy0: couldn't determine device driver; ignoring...
Jul 14 11:17:29 aumakua NetworkManager[3192]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
Jul 14 11:17:29 aumakua NetworkManager[3192]: <warn> /sys/devices/virtual/net/dummy0: couldn't determine device driver; ignoring...
Jul 14 11:17:29 aumakua NetworkManager[3192]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> ModemManager available in the bus
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0) supports 4 scan SSIDs
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: starting -> ready
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jul 14 11:17:29 aumakua NetworkManager[3192]: <warn> Trying to remove a non-existant call id.
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: ready -> disconnected
Jul 14 11:17:29 aumakua NetworkManager[3192]: <info> (wlan0) supports 4 scan SSIDs
Jul 14 11:17:31 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: disconnected -> inactive
Jul 14 11:17:32 aumakua /etc/init.d/NetworkManager[3163]: WARNING: NetworkManager has started, but is inactive
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) starting connection 'My Network Totoro'
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0/wireless): access point 'My Network Totoro' has security, but secrets are required.
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0/wireless): connection 'My Network Totoro' has security, and secrets exist.  No new secrets needed.
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Config: added 'ssid' value 'My Network Totoro'
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Config: added 'scan_ssid' value '1'
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Config: added 'psk' value '<omitted>'
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> Config: set interface ap_scan to 1
Jul 14 11:17:43 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jul 14 11:17:45 aumakua kernel: [  166.211499] wlan0: authenticate with bc:05:43:94:91:2a
Jul 14 11:17:45 aumakua kernel: [  166.214428] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
Jul 14 11:17:45 aumakua kernel: [  166.214436] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 0
Jul 14 11:17:45 aumakua kernel: [  166.214448] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
Jul 14 11:17:45 aumakua kernel: [  166.214453] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 0
Jul 14 11:17:45 aumakua kernel: [  166.234226] wlan0: send auth to bc:05:43:94:91:2a (try 1/3)
Jul 14 11:17:45 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jul 14 11:17:45 aumakua kernel: [  166.235806] wlan0: authenticated
Jul 14 11:17:45 aumakua kernel: [  166.236587] wlan0: associate with bc:05:43:94:91:2a (try 1/3)
Jul 14 11:17:45 aumakua kernel: [  166.240070] wlan0: RX AssocResp from bc:05:43:94:91:2a (capab=0x431 status=0 aid=2)
Jul 14 11:17:45 aumakua kernel: [  166.240198] phy0 -> rt2800usb_txdone_entry_check: Debug - TX status report missed for queue 0 entry 1
Jul 14 11:17:45 aumakua kernel: [  166.240275] phy0 -> rt2800usb_txdone_entry_check: Debug - TX status report missed for queue 0 entry 2
Jul 14 11:17:45 aumakua kernel: [  166.240357] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 14 11:17:45 aumakua kernel: [  166.240435] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 14 11:17:45 aumakua kernel: [  166.240529] phy0 -> rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping
Jul 14 11:17:45 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jul 14 11:17:45 aumakua kernel: [  166.243396] wlan0: associated
Jul 14 11:17:45 aumakua kernel: [  166.243470] cfg80211: Calling CRDA for country: DE
Jul 14 11:17:45 aumakua kernel: [  166.246931] cfg80211: Regulatory domain changed to country: DE
Jul 14 11:17:45 aumakua kernel: [  166.246937] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 14 11:17:45 aumakua kernel: [  166.246941] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 11:17:45 aumakua kernel: [  166.246945] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 11:17:45 aumakua kernel: [  166.246948] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 11:17:45 aumakua kernel: [  166.246951] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
Jul 14 11:17:45 aumakua kernel: [  166.246954] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Jul 14 11:17:45 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: associating -> associated
Jul 14 11:17:45 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jul 14 11:17:45 aumakua kernel: [  166.350850] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
Jul 14 11:17:45 aumakua kernel: [  166.350858] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
Jul 14 11:17:45 aumakua kernel: [  166.350860] phy0 -> rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
Jul 14 11:17:46 aumakua dhcpcd[3157]: wlan0: carrier acquired
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'My Network Totoro'.
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jul 14 11:17:46 aumakua NetworkManager[3192]: client_start: assertion `priv->client_type != 0' failed
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> (wlan0): device state change: ip-config -> failed (reason 'dhcp-start-failed') [70 120 15]
Jul 14 11:17:46 aumakua NetworkManager[3192]: <warn> Activation (wlan0) failed for connection 'My Network Totoro'
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> (wlan0): deactivating device (reason 'none') [0]
Jul 14 11:17:46 aumakua kernel: [  167.262113] wlan0: deauthenticating from bc:05:43:94:91:2a by local choice (reason=3)
Jul 14 11:17:46 aumakua dhcpcd[3157]: wlan0: soliciting an IPv6 router
Jul 14 11:17:46 aumakua dhcpcd[3157]: ipv6rs_start: ipv6rs_open: Address family not supported by protocol
Jul 14 11:17:46 aumakua dhcpcd[3157]: wlan0: carrier lost
Jul 14 11:17:46 aumakua NetworkManager[3192]: <warn> Connection disconnected (reason -3)
Jul 14 11:17:46 aumakua NetworkManager[3192]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jul 14 11:17:46 aumakua kernel: [  167.283665] cfg80211: Calling CRDA to update world regulatory domain
Jul 14 11:17:46 aumakua NetworkManager[3192]: <warn> Connection disconnected (reason -3)
Jul 14 11:17:46 aumakua kernel: [  167.284826] cfg80211: World regulatory domain updated:
Jul 14 11:17:46 aumakua kernel: [  167.284828] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 14 11:17:46 aumakua kernel: [  167.284829] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 11:17:46 aumakua kernel: [  167.284830] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 11:17:46 aumakua kernel: [  167.284830] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 14 11:17:46 aumakua kernel: [  167.284831] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 11:17:46 aumakua kernel: [  167.284832] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

_________________
"Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction"
Back to top
View user's profile Send private message
beizhuchun
n00b
n00b


Joined: 11 Apr 2013
Posts: 21

PostPosted: Sun Jul 14, 2013 10:06 am    Post subject: Reply with quote

It's maybe due to networkmanager bug. After update networkmanager, my eht and wlan both failed to connect. The messages as following:
Jul 14 17:43:53 msi-gt60 NetworkManager[3589]: <info> (enp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jul 14 17:43:53 msi-gt60 NetworkManager[3589]: client_start: assertion `priv->client_type != 0' failed
Jul 14 17:43:53 msi-gt60 NetworkManager[3589]: <info> (enp2s0): device state change: ip-config -> failed (reason 'dhcp-start-failed') [70 120 15]
Jul 14 17:43:53 msi-gt60 NetworkManager[3589]: <info> Marking connection 'Wired connection 1' invalid.
Jul 14 17:43:53 msi-gt60 NetworkManager[3589]: <warn> Activation (enp2s0) failed for connection 'Wired connection 1'
Jul 14 17:43:53 msi-gt60 NetworkManager[3589]: <info> Activation (enp2s0) Stage 3 of 5 (IP Configure Start) complete.
Jul 14 17:43:53 msi-gt60 NetworkManager[3589]: <info> (enp2s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 14 17:43:53 msi-gt60 NetworkManager[3589]: <info> (enp2s0): deactivating device (reason 'none') [0]

and I found :
Unknown keys: sysctl: cannot stat /proc/sys/net/ipv4/tcp_frto_response: have no such file or dir
sysctl: cannot stat /proc/sys/net/core/wmen_max: have no such file or dir

druing boot.
Back to top
View user's profile Send private message
Martux
Veteran
Veteran


Joined: 04 Feb 2005
Posts: 1710
Location: Mannheim, Germany

PostPosted: Sun Jul 14, 2013 10:19 am    Post subject: Reply with quote

So, what did you do? I am on latest ~amd64 version (on Windows right now, so I can't check the version).
Did any version proof to work for you?
_________________
"Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction"
Back to top
View user's profile Send private message
Martux
Veteran
Veteran


Joined: 04 Feb 2005
Posts: 1710
Location: Mannheim, Germany

PostPosted: Sun Jul 14, 2013 10:22 am    Post subject: Reply with quote

Btw. I am on gentoo-sources-3.9.8
_________________
"Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction"
Back to top
View user's profile Send private message
beizhuchun
n00b
n00b


Joined: 11 Apr 2013
Posts: 21

PostPosted: Sun Jul 14, 2013 12:30 pm    Post subject: Reply with quote

I just added "=net-misc/dhcpcd-6.0.2" into /etc/portage/package.mask, and emerge -uDN world. It's work fine for me
Back to top
View user's profile Send private message
Martux
Veteran
Veteran


Joined: 04 Feb 2005
Posts: 1710
Location: Mannheim, Germany

PostPosted: Sun Jul 14, 2013 12:58 pm    Post subject: Reply with quote

Nah, sh**. Doesn'T work for me either :(
I emerged dhcpcd-5.9.9.7-r1 but still the same.
Even if I stop Networkmanager completely and start up wpa_supplicant, I can't configure it in the gui. The network and adapter fields are just empty, scanning doesn't show up anything either.
ifconfig shows wlan0 there.
I tried it with sysreccd and there it connects flawless... Whew!
_________________
"Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction"
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6251
Location: Goose Creek SC

PostPosted: Sun Jul 14, 2013 4:28 pm    Post subject: Reply with quote

Just installed network manager for my ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter and it is working beautifully with gentoo-sources 3.8.13 and 3.10.0.
if you have wired internet connectivity when gentoo is booted, boot gentoo. If no connectivity, boot install cd/usb, mount the gentoo partitions, enter the chroot.
Code:
emerge wgetpaste usbutils
dmesg | wgetpaste
wgetpaste /etc/conf.d/net
ls -l /init.d | wgetpaste
wgetpaste /etc/rc.conf
wgetpaste /usr/src/linux/.config
rc-update show | wgetpaste
wgetpaste /lib/firmware
emerge --info | wgetpaste
lsusb | wgetpaste
emerge -s networkmanager nm-applet | wgetpaste
post the urls returned
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Evilguru
Guru
Guru


Joined: 16 Aug 2005
Posts: 380
Location: England

PostPosted: Mon Jul 15, 2013 7:31 pm    Post subject: Reply with quote

Since updating my wired ~AMD64 system yesterday I have been experiencing the same issues.
Code:

Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Auto-activating connection 'Wired connection 1'.
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) starting connection 'Wired connection 1'
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> (eth1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> (eth1): device state change: prepare -> config (reason 'none') [40 50 0]
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) successful.
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled.
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) started...
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> (eth1): device state change: config -> ip-config (reason 'none') [50 70 0]
Jul 15 20:24:39 localhost NetworkManager[18454]: client_start: assertion `priv->client_type != 0' failed
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> (eth1): device state change: ip-config -> failed (reason 'dhcp-start-failed') [70 120 15]
Jul 15 20:24:39 localhost NetworkManager[18454]: <warn> Activation (eth1) failed for connection 'Wired connection 1'
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete.
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> (eth1): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 15 20:24:39 localhost NetworkManager[18454]: <info> (eth1): deactivating device (reason 'none') [0]


Given that I have made no other changes to my system (other than updating) and that I have a relatively simple configuration I am going to put this down to a bug. I am unsure in which package, however. But, manually su'ing to root and running dhcpcd eth1 gets me connected.

Regards, Freddie.
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6251
Location: Goose Creek SC

PostPosted: Mon Jul 15, 2013 7:54 pm    Post subject: Reply with quote

have a suspicion based on experiences recently that things have been "fixed" so that only one up interface can exist at a time. ifplugd or netplug sometimes resolve the problem. stopping one interface and restarting the other sometimes resolves the problem.
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Martux
Veteran
Veteran


Joined: 04 Feb 2005
Posts: 1710
Location: Mannheim, Germany

PostPosted: Mon Jul 15, 2013 8:32 pm    Post subject: Reply with quote

Guys, thanks for your effort. What DONAHUE suggests:
I don't really have the time right now troubleshooting my new box. I just copied over my old core i7 installation from my laptop over to the haswell-beast, did some kernel tweaking and an emerge -e @world, and see, it works. This network issue is giving me grey hairs. So far my Linux-experience with this brand new device has been ugly:
Sabayon: no mouse and keyboard. Kubuntu doesn't boot. MY favorite, Gentoo: this issue. Sysrescd works pretty good, but is not what I want to install by any means.

dhcpcd wlan0 only gives this erros (with or without networkmanager running):
Code:

dhcpcd wlan0
dhcpcd[5474]: version 6.0.2 starting
dhcpcd[5474]: wlan0: up_interface: Operation not possible due to RF-kill
dhcpcd[5474]: wlan0: waiting for carrier
dhcpcd[5474]: timed out
dhcpcd[5474]: allowing 8 seconds for IPv4LL timeout
dhcpcd[5474]: timed out
dhcpcd[5474]: exited

_________________
"Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction"
Back to top
View user's profile Send private message
spysz
n00b
n00b


Joined: 21 Apr 2007
Posts: 15
Location: Kraków

PostPosted: Mon Jul 15, 2013 8:44 pm    Post subject: Reply with quote

DONAHUE wrote:
have a suspicion based on experiences recently that things have been "fixed" so that only one up interface can exist at a time. ifplugd or netplug sometimes resolve the problem. stopping one interface and restarting the other sometimes resolves the problem.


Hi,

I have the same problem.

Code:
Jul 15 22:40:56 cessna NetworkManager[26741]:    SCPlugin-Ifnet: getting unmanaged specs...
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> monitoring kernel firmware directory '/lib/firmware'.
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> rfkill2: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill2) (driver iwlwifi)
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> WiFi hardware radio set disabled
Jul 15 22:40:56 cessna NetworkManager[26741]: <warn> No usable DHCP client found! DHCP configurations will fail.
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> WiFi disabled by radio killswitch; disabled by state file
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> WWAN enabled by radio killswitch; enabled by state file
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> WiMAX enabled by radio killswitch; enabled by state file
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> Networking is enabled by state file
Jul 15 22:40:56 cessna NetworkManager[26741]: <warn> failed to allocate link cache: (-10) Operation not supported
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> (eth0): carrier is ON
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> (eth0): new Ethernet device (driver: 'e1000e' ifindex: 2)
Jul 15 22:40:56 cessna NetworkManager[26741]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Jul 15 22:40:56 cessna kernel: NetworkManager[26741]: segfault at 0 ip           (null) sp 00007fff2952c138 error 14 in NetworkManager[400000+ff000]
Jul 15 22:40:56 cessna /etc/init.d/NetworkManager[26719]: WARNING: NetworkManager has started, but is inactive


Code:

Jul 15 22:30:59 cessna /etc/init.d/NetworkManager[23463]: WARNING: NetworkManager has started, but is inactive
Jul 15 22:31:02 cessna dbus[23458]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
Jul 15 22:31:02 cessna dbus[23458]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1


Anyone? Has anyone know where is the problem!?

Regards,
Simon
Back to top
View user's profile Send private message
MarmaladeSky
n00b
n00b


Joined: 16 Jul 2013
Posts: 1

PostPosted: Tue Jul 16, 2013 9:19 am    Post subject: Reply with quote

Could you post your /etc/NetworkManager/NetworkManager.conf ?
Back to top
View user's profile Send private message
Martux
Veteran
Veteran


Joined: 04 Feb 2005
Posts: 1710
Location: Mannheim, Germany

PostPosted: Fri Jul 19, 2013 7:20 pm    Post subject: Reply with quote

Topic is solved. It had nothing to do with a misconfiguration but was a Networkmanager bug. Latest version fixed it. Thanks to all participants!
_________________
"Coincidence is God's way of remaining anonymous."
Albert Einstein
"The road to success is always under construction"
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum