| View previous topic :: View next topic |
| Author |
Message |
newcomer2gentoo
n00b
Joined: 12 Jun 2013
Posts: 4
|
 Posted: Wed Jun 12, 2013 2:04 pm Post subject: missing Sata Raid |
 |
|
Hello @ all,
i have a litte problem. I have a PRIMERGY TX150 S8 server with 2xSAS and 2x SATA HDDs.
Both a configured as a Raid1. So i have one SAS Raid1 and one SATA Raid1
I compieled the kernel with
| Code: |
genkernel --dmraid --menuconfig all
|
The sas raid works perferct and it´s listed in /dev/mapper. Gentoo is installed and run perfect on the sas raid. But i can´t find my SATA Raid. The Sata drivers are included to the Kernel
| Code: |
Device Drivers
<*> Serial ATA and parallel ATA drivers
[*] ATA ACPI SUPPORT
[*] SATA Port Multiplier support
<*> AHCI SATA support
<*> Platform AHCI SATA support.
|
fdisk -l shows only the SAS HDDs.
I have no ideas why the SATA Raid is not found. |
|
| Back to top |
|
 |
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Wed Jun 12, 2013 3:15 pm Post subject: |
|
|
are the sata drives set ahci in bios?
_________________
Defund the FCC. |
|
| Back to top |
|
|
newcomer2gentoo
n00b
Joined: 12 Jun 2013
Posts: 4
|
| Posted: Thu Jun 13, 2013 4:57 am Post subject: |
|
|
Hello,
yes, sata mode in BIOS is set to ahci.
any other ideas? |
|
| Back to top |
|
|
newcomer2gentoo
n00b
Joined: 12 Jun 2013
Posts: 4
|
| Posted: Fri Jun 14, 2013 9:44 am Post subject: |
|
|
no ideas? I don´t know what to do.... I really need help  |
|
| Back to top |
|
|
chithanh
Developer
Joined: 05 Aug 2006
Posts: 2158
Location: Berlin, Germany
|
| Posted: Fri Jun 14, 2013 12:01 pm Post subject: |
|
|
Check "lspci -k" to verify that a driver is in use for your SATA controller. Or are all drives connected to the same controller?
If it is fakeraid, then it might be unsupported by Linux and the drives may show up individually. |
|
| Back to top |
|
|
newcomer2gentoo
n00b
Joined: 12 Jun 2013
Posts: 4
|
| Posted: Mon Jun 24, 2013 1:09 pm Post subject: |
|
|
Hi,
i was a week at Holiday....
all drives are connectec do the same controller. Yes, it´s a fake raid, but the SAS Raid works, only SATA Raid is missing.
lscpi -k show this. I think this is o.k.
| Code: |
00:1f.0 ISA bridge: Intel Corporation C600/X79 series chipset LPC Controller (rev 05)
Subsystem: Fujitsu Technology Solutions Device 11b6
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller (rev 05)
Subsystem: Fujitsu Technology Solutions Device 11b6
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation C600/X79 series chipset SMBus Host Controller (rev 05)
Subsystem: Fujitsu Technology Solutions Device 11b6
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
04:00.0 Serial Attached SCSI controller: Intel Corporation C604/X79 series chipset 4-Port SATA/SAS Storage Control Unit (rev 05)
Subsystem: Fujitsu Technology Solutions Device 11b6
Kernel driver in use: isci
|
|
|
| Back to top |
|
|
|
Installing Gentoo
