View previous topic :: View next topic |
Author |
Message |
seba766 n00b
Joined: 25 Feb 2013 Posts: 14
|
Posted: Tue Jun 11, 2013 12:44 pm Post subject: Xorg Number of created screens does not match number of ... |
|
|
Hello everyone,
I have a big trouble with installation Xorg server. If I past
a have message
Code: | number of created screens does not match number of detected devices. configuration failed |
after all I run startx and have message
Code: | no screens found(EE) |
and my /var/log/xorg shows
Code: | Warning, couldn't open module mga
...
Failed to load module "mga" (module does not exist, 0) |
command
Code: | qlist -IC x11-drivers |
shows
Code: | x11-drivers/xf86-input-evdev
x11-drivers/xf86-input-keyboard
x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-intel |
Please don't return to search because I researach 1000 site, and don't have good question for my trouble.
My laptop is samsung n150 with Intel Graphics Media Accelerator (GMA) 3150
Sorry for my english |
|
Back to top |
|
|
Ant P. Watchman
Joined: 18 Apr 2009 Posts: 6920
|
Posted: Wed Jun 12, 2013 1:55 am Post subject: |
|
|
Can you post the output of "lspci", and "dmesg | grep -i drm" |
|
Back to top |
|
|
Jaglover Watchman
Joined: 29 May 2005 Posts: 8291 Location: Saint Amant, Acadiana
|
|
Back to top |
|
|
seba766 n00b
Joined: 25 Feb 2013 Posts: 14
|
Posted: Wed Jun 12, 2013 9:32 am Post subject: |
|
|
Yes I configure my kernel to use KMS. I follow for this instuction
Code: | http://www.gentoo.org/doc/en/xorg-config.xml?style=printable |
"dmesg | grep -i drm" show
Code: | Initialized drm 1.1.0 20060810
SUpport vblank timestap caching Rev 1 (10.10.2010)
No driver support for vblank timestap query
Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 |
Code: | 00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
05:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller |
|
|
Back to top |
|
|
Jaglover Watchman
Joined: 29 May 2005 Posts: 8291 Location: Saint Amant, Acadiana
|
Posted: Fri Jun 14, 2013 9:09 pm Post subject: |
|
|
Have you tried booting with SystemRescueCd, if it works investigate how it does it.
OTOH, you mentioned you tried X -configure, not sure but methinks this command is not compatible with KMS. In fact, this command is obsolete and should not be used with any hardware configuration. _________________ My Gentoo installation notes.
Please learn how to denote units correctly! |
|
Back to top |
|
|
|