queen Veteran
Joined: 19 Jul 2005 Posts: 1642
|
Posted: Tue Jun 11, 2013 1:40 pm Post subject: samsung scx 4200 doesn't scan |
|
|
I have samsung scx 4200 scanner. The scanner is detected by sane. But it doesn't scan. Fails with error:
"Failed to start scanner. Error during device I/O".
I belong to the scanner group, lp. It uses the xerox_mfp driver which is installed with sane backend.
This is the output of dmesg
Code: | usb 3-2: new high-speed USB device number 35 using xhci_hcd
usb 3-2: New USB device found, idVendor=04e8, idProduct=341b
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: SCX-4200 Series
usb 3-2: Manufacturer: Samsung
usb 3-2: SerialNumber: 8T07BAZP801595Z.
usb 3-2: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-2: ep 0x84 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-2: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-2: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-2: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-2: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
usblp0: USB Bidirectional printer dev 35 if 1 alt 0 proto 2 vid 0x04E8 pid 0x341B
usb 3-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
usb 3-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
usb 3-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
usb 3-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
|
Code: | sane-find-scanner -q
found USB scanner (vendor=0x04e8 [Samsung], product=0x341b [SCX-4200 Series]) at libusb:003:035
|
Code: | scanimage -L
device `xerox_mfp:libusb:003:036' is a SAMSUNG ORION multi-function peripheral |
So, what's wrong? Why it doesn't scan? |
|