Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] Xorg unknow problem
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
sidaphextwin
n00b
n00b


Joined: 10 Jun 2013
Posts: 8

PostPosted: Mon Jun 10, 2013 2:11 pm    Post subject: [SOLVED] Xorg unknow problem Reply with quote

Hello, I'm new to gentoo, I just installed everything but I can not start kde.

I installed xorg-server and xorg-drivers, but there is no / etc/X11/xorg.conf.d. Does not exist. Also I installed xf86-video-intel.

I have also rc-update add udev sysinit, without any improvement.

This is the output of lspci:

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Broadcom Corporation Device 4358
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
03:00.1 SD Host controller: Broadcom Corporation Device 16bc (rev 10)
03:00.2 System peripheral: Broadcom Corporation Device 16be (rev 10)
03:00.3 System peripheral: Broadcom Corporation Device 16bf (rev 10)

This is my Xorg log output:

[ 52.302]
X.Org X Server 1.13.4
Release Date: 2013-04-17
[ 52.302] X Protocol Version 11, Revision 0
[ 52.302] Build Operating System: Linux 3.8.13-gentoo i686 Gentoo
[ 52.303] Current Operating System: Linux NV47H07m 3.8.13-gentoo #1 SMP Fri Jun 7 20:17:10 CDT 2013 i686
[ 52.303] Kernel command line: root=/dev/ram0 real_root=/dev/sda2
[ 52.303] Build Date: 10 June 2013 12:41:38AM
[ 52.303]
[ 52.303] Current version of pixman: 0.28.0
[ 52.303] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 52.303] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 52.304] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 10 01:25:07 2013
[ 52.341] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 52.406] (==) No Layout section. Using the first Screen section.
[ 52.406] (==) No screen section available. Using defaults.
[ 52.406] (**) |-->Screen "Default Screen Section" (0)
[ 52.406] (**) | |-->Monitor "<default monitor>"
[ 52.406] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 52.406] (==) Automatically adding devices
[ 52.406] (==) Automatically enabling devices
[ 52.406] (==) Automatically adding GPU devices
[ 52.423] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 52.423] Entry deleted from font path.
[ 52.423] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 52.423] Entry deleted from font path.
[ 52.423] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 52.423] Entry deleted from font path.
[ 52.423] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 52.423] Entry deleted from font path.
[ 52.423] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 52.423] Entry deleted from font path.
[ 52.423] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 52.423] Entry deleted from font path.
[ 52.423] (==) FontPath set to:

[ 52.423] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 52.423] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 52.447] (II) Loader magic: 0x82a1620
[ 52.447] (II) Module ABI versions:
[ 52.447] X.Org ANSI C Emulation: 0.4
[ 52.447] X.Org Video Driver: 13.1
[ 52.447] X.Org XInput driver : 18.0
[ 52.447] X.Org Server Extension : 7.0
[ 52.448] (--) PCI:*(0:0:2:0) 8086:0116:1025:0508 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00002000/64
[ 52.448] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 52.449] Initializing built-in extension Generic Event Extension
[ 52.449] Initializing built-in extension SHAPE
[ 52.449] Initializing built-in extension MIT-SHM
[ 52.450] Initializing built-in extension XInputExtension
[ 52.450] Initializing built-in extension XTEST
[ 52.450] Initializing built-in extension BIG-REQUESTS
[ 52.450] Initializing built-in extension SYNC
[ 52.450] Initializing built-in extension XKEYBOARD
[ 52.450] Initializing built-in extension XC-MISC
[ 52.450] Initializing built-in extension XINERAMA
[ 52.452] Initializing built-in extension XFIXES
[ 52.452] Initializing built-in extension RENDER
[ 52.452] Initializing built-in extension RANDR
[ 52.452] Initializing built-in extension COMPOSITE
[ 52.452] Initializing built-in extension DAMAGE
[ 52.452] Initializing built-in extension MIT-SCREEN-SAVER
[ 52.452] Initializing built-in extension DOUBLE-BUFFER
[ 52.452] Initializing built-in extension RECORD
[ 52.452] Initializing built-in extension DPMS
[ 52.452] Initializing built-in extension X-Resource
[ 52.452] Initializing built-in extension XVideo
[ 52.453] Initializing built-in extension XVideo-MotionCompensation
[ 52.453] Initializing built-in extension XFree86-VidModeExtension
[ 52.453] Initializing built-in extension XFree86-DGA
[ 52.453] Initializing built-in extension XFree86-DRI
[ 52.453] Initializing built-in extension DRI2
[ 52.453] (II) LoadModule: "glx"
[ 52.519] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 52.544] (II) Module glx: vendor="X.Org Foundation"
[ 52.544] compiled for 1.13.4, module version = 1.0.0
[ 52.544] ABI class: X.Org Server Extension, version 7.0
[ 52.545] (==) AIGLX enabled
[ 52.545] Loading extension GLX
[ 52.545] (==) Matched intel as autoconfigured driver 0
[ 52.545] (==) Matched vesa as autoconfigured driver 1
[ 52.545] (==) Matched modesetting as autoconfigured driver 2
[ 52.545] (==) Matched fbdev as autoconfigured driver 3
[ 52.545] (==) Assigned the driver to the xf86ConfigLayout
[ 52.545] (II) LoadModule: "intel"
[ 52.565] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 52.597] (II) Module intel: vendor="X.Org Foundation"
[ 52.597] compiled for 1.13.4, module version = 2.20.13
[ 52.597] Module class: X.Org Video Driver
[ 52.597] ABI class: X.Org Video Driver, version 13.1
[ 52.597] (II) LoadModule: "vesa"
[ 52.599] (WW) Warning, couldn't open module vesa
[ 52.599] (II) UnloadModule: "vesa"
[ 52.599] (II) Unloading vesa
[ 52.599] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 52.599] (II) LoadModule: "modesetting"
[ 52.599] (WW) Warning, couldn't open module modesetting
[ 52.599] (II) UnloadModule: "modesetting"
[ 52.599] (II) Unloading modesetting
[ 52.599] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 52.599] (II) LoadModule: "fbdev"
[ 52.599] (WW) Warning, couldn't open module fbdev
[ 52.599] (II) UnloadModule: "fbdev"
[ 52.599] (II) Unloading fbdev
[ 52.599] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 52.599] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 52.600] (--) using VT number 7

[ 52.724] (EE) No devices detected.
[ 52.724]
Fatal server error:
[ 52.724] no screens found
[ 52.724] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 52.724] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 52.724] (EE)

Any idea?

Thanks!!!


Last edited by sidaphextwin on Mon Jun 10, 2013 10:16 pm; edited 2 times in total
Back to top
View user's profile Send private message
mvaterlaus
Tux's lil' helper
Tux's lil' helper


Joined: 01 Oct 2010
Posts: 145
Location: Switzerland

PostPosted: Mon Jun 10, 2013 2:25 pm    Post subject: Reply with quote

hi,
first of all, the settings directory is located at /usr/share/X11/xorg.conf.d/ . What does your make.conf list for the extenden USE flag VIDEO_CARDS? if you don't have intel mentioned, correct that (remove all other listed) and re-merge xorg-drivers.
what do you have enabled in your kernel? do you have the following enabled?
Code:

AGP_INTEL = y
DRM_I915 = y
DRM_I915_KMS = y
Back to top
View user's profile Send private message
sidaphextwin
n00b
n00b


Joined: 10 Jun 2013
Posts: 8

PostPosted: Mon Jun 10, 2013 2:35 pm    Post subject: Xorg unknow problem Reply with quote

Yes, in my make.conf I have VIDEO_CARDS = intel.

I compiled the kernel with genkernel all... and i add x11-base/xorg-server udev to package.use.

In xorg.conf.d only have two files:

10-evdev.conf and 50-synaptics.conf

Thanks
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 1562
Location: Berlin, Germany

PostPosted: Mon Jun 10, 2013 6:04 pm    Post subject: Reply with quote

The symptoms point to kernel config being wrong. In genkernel --menuconfig navigate to the options that mvaterlaus mentioned and ensure that they are enabled (if you can't find them press / to search).
Back to top
View user's profile Send private message
sidaphextwin
n00b
n00b


Joined: 10 Jun 2013
Posts: 8

PostPosted: Mon Jun 10, 2013 10:17 pm    Post subject: Xorg unknow problem Reply with quote

Yes, this was the problem. Compile the kernel activating what you told me and it worked without problems.

Thank you very much!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum