View previous topic :: View next topic |
Author |
Message |
shiznix Guru
Joined: 29 Jun 2003 Posts: 367 Location: Adelaide, Australia
|
Posted: Fri May 17, 2013 9:50 am Post subject: |
|
|
noclear2000 wrote: | Hi shiznix!
Nautilus strace first (pretty verbose even on the PID 2727 before i managed to start a nautilus window). did it as fast as i could: http://tschulzke.com/misc/nautilus.strace.tar.gz
In case it is of any importance PID 2727 is the default nautilus process:
Code: |
thilo@zenbook [~]$ ps -ef | grep [n]autilus
thilo 2727 2633 4 20:19 ? 00:00:34 nautilus -n
thilo@zenbook [~]$
|
Trying the ICQ stuff now. |
Aha! I see from your strace that you are using an alternative icon theme called Faenza, one that is not Radiance or Ambiance as comes with Unity.
Here is someone from the Ubuntu camp with the same problem, and a fix -> http://askubuntu.com/questions/202941/broken-icons-with-faenza-theme |
|
Back to top |
|
|
noclear2000 Apprentice
Joined: 21 Jun 2006 Posts: 153 Location: Germany
|
Posted: Fri May 17, 2013 10:21 am Post subject: |
|
|
Hi shiznix!
I am not tied to Faenza. I will try the fix anyway. choosing Faenza was just part of my playing around. I will also try setting Ambiance and Radiance. I think ubuntu-mono-dark is what I once had active and what I like. Will check that after works. Thanks!
EDIT: I installed telepathy-python and temporarily resembled your USE-flag situation:
Code: |
USE="-msn -nls -spell -xscreensaver -zeroconf" emerge -1av $(qlist -ICUv telepathy pidgin empathy | awk '{ print $1 }' | sed 's/-r[0-9]*$//g' | while read line; do echo "$line" | sed "s/-$(echo $line | awk -F\- '{ print $NF }')$//g"; done | tr "\n" " ")
|
Et voila. The icq problem is gone! As I changed all USE flags at once I cannot tell which one made the difference... Going to persist them now.
Regarding the icon situation it doesn't matter which icon set and theme I use. The nautilus (and at some other spots) icons are missing. Also when slecting ubunto-mono-dark for example the icons for the indicators in the appmenue like battery, wireless/nm-applett, sound etc. do not change but stay like they were in the previous them which made a change. Mst of the time they look like Gnome-default. (so pretty ugly -sorry). I revert all Apperance settings back to default (with the accoridng buttons like "Use default". But no luck.
EDIT2: I've been too fast. pidgin (which was also not working) is now working. empathy still no luck. But I do not care. That's too much compiling for my precious SSD. I'll use pidgin! The icons are anyway of more importance.
EDIT3: Icon issue finally solved!!! I unmerged all icons-themes on tty with no X processes, did a deep world update newuse which failed on gnome-icons-theme-standard, due to an issue with gnome-base/librsvg. After a one-shot merge of gnome-base/librsvg it has gone through. At this point in time before firing up X I basically already knew that a remerge of gnome-base/librsvg only would have been enough probably... I remember that I've seen the same message (when running apps from console and in strace) that made the icon-theme merge fail (Error processing input file with to-pixdata: failed to load "./assets/dnd-counter.svg": Couldn't recognize the image file format for file)...
Cheers |
|
Back to top |
|
|
javispedro n00b
Joined: 11 Mar 2013 Posts: 14
|
Posted: Sat May 18, 2013 8:17 pm Post subject: |
|
|
Is unity-base/gnome-control-center-signon depending on net-im/pidgin[gstreamer] really mandatory?
pidgin[gstreamer] uses Farstream:0.1, which depends on gstreamer 0.10, while telepathy uses Farstream:0.2, which depends on gstreamer 1.
The net result is a bunch of slot conflicts, e.g.
Code: | net-libs/libnice:0
(net-libs/libnice-0.1.4::gentoo, ebuild scheduled for merge) conflicts with
~net-libs/libnice-0.1.3 required by (media-plugins/gst-plugins-libnice-0.1.3::gentoo, ebuild scheduled for merge) |
|
|
Back to top |
|
|
shiznix Guru
Joined: 29 Jun 2003 Posts: 367 Location: Adelaide, Australia
|
Posted: Sun May 19, 2013 5:49 am Post subject: |
|
|
noclear2000 wrote: | Hi shiznix!
I am not tied to Faenza. I will try the fix anyway. choosing Faenza was just part of my playing around. I will also try setting Ambiance and Radiance. I think ubuntu-mono-dark is what I once had active and what I like. Will check that after works. Thanks!
EDIT: I installed telepathy-python and temporarily resembled your USE-flag situation:
Code: |
USE="-msn -nls -spell -xscreensaver -zeroconf" emerge -1av $(qlist -ICUv telepathy pidgin empathy | awk '{ print $1 }' | sed 's/-r[0-9]*$//g' | while read line; do echo "$line" | sed "s/-$(echo $line | awk -F\- '{ print $NF }')$//g"; done | tr "\n" " ")
|
Et voila. The icq problem is gone! As I changed all USE flags at once I cannot tell which one made the difference... Going to persist them now.
Regarding the icon situation it doesn't matter which icon set and theme I use. The nautilus (and at some other spots) icons are missing. Also when slecting ubunto-mono-dark for example the icons for the indicators in the appmenue like battery, wireless/nm-applett, sound etc. do not change but stay like they were in the previous them which made a change. Mst of the time they look like Gnome-default. (so pretty ugly -sorry). I revert all Apperance settings back to default (with the accoridng buttons like "Use default". But no luck.
EDIT2: I've been too fast. pidgin (which was also not working) is now working. empathy still no luck. But I do not care. That's too much compiling for my precious SSD. I'll use pidgin! The icons are anyway of more importance.
EDIT3: Icon issue finally solved!!! I unmerged all icons-themes on tty with no X processes, did a deep world update newuse which failed on gnome-icons-theme-standard, due to an issue with gnome-base/librsvg. After a one-shot merge of gnome-base/librsvg it has gone through. At this point in time before firing up X I basically already knew that a remerge of gnome-base/librsvg only would have been enough probably... I remember that I've seen the same message (when running apps from console and in strace) that made the icon-theme merge fail (Error processing input file with to-pixdata: failed to load "./assets/dnd-counter.svg": Couldn't recognize the image file format for file)...
Cheers |
Great you got it sorted!
I'll try and mess with enabling some of those USE flags then and see if I can reliably reproduce the problem as time permits.
javispedro wrote: | Is unity-base/gnome-control-center-signon depending on net-im/pidgin[gstreamer] really mandatory?
pidgin[gstreamer] uses Farstream:0.1, which depends on gstreamer 0.10, while telepathy uses Farstream:0.2, which depends on gstreamer 1.
The net result is a bunch of slot conflicts, e.g.
Code: | net-libs/libnice:0
(net-libs/libnice-0.1.4::gentoo, ebuild scheduled for merge) conflicts with
~net-libs/libnice-0.1.3 required by (media-plugins/gst-plugins-libnice-0.1.3::gentoo, ebuild scheduled for merge) |
|
Hi javisperdro.
You're right it's not mandatory so have removed 'gstreamer' USE dep. for pidgin in gnome-control-center-signon.
The slot conflict is caused by you having keyword unmasked net-libs/libnice, but not having keyword unmasked media-plugins/gst-plugins-libnice, thanks |
|
Back to top |
|
|
brothermechanic n00b
Joined: 10 Dec 2012 Posts: 37
|
Posted: Fri May 24, 2013 8:34 am Post subject: |
|
|
Hi
How to turn wondow buttons (close/max/min) to left side? |
|
Back to top |
|
|
shiznix Guru
Joined: 29 Jun 2003 Posts: 367 Location: Adelaide, Australia
|
Posted: Fri May 24, 2013 11:01 am Post subject: |
|
|
brothermechanic wrote: | Hi
How to turn wondow buttons (close/max/min) to left side? |
Hey! You can change them to whichever side you want by using System Settings > Unity Tweak Tool > Appearance - Window Controls > Layout: Alignment
This happens in real time and shouldn't require logging out of your Xsession. |
|
Back to top |
|
|
brothermechanic n00b
Joined: 10 Dec 2012 Posts: 37
|
Posted: Fri May 24, 2013 11:13 am Post subject: |
|
|
Thank you!
and
Thank you so much for great overlay!!! |
|
Back to top |
|
|
brothermechanic n00b
Joined: 10 Dec 2012 Posts: 37
|
Posted: Wed May 29, 2013 5:22 pm Post subject: |
|
|
shiznix, please help.
Frame rate performance became not so good as some month before.
this is for example http://ubuntuone.com/2H8ul6Xm8obyZy8swiUSwJ
Frames changed sharply, not smoothly, BUT in fool screen mode all is OK.
I guess the problem is in compiz (may be).
What i must to check?
Thank you
ps: my card is nvidia 660m |
|
Back to top |
|
|
shiznix Guru
Joined: 29 Jun 2003 Posts: 367 Location: Adelaide, Australia
|
Posted: Thu May 30, 2013 10:24 pm Post subject: |
|
|
brothermechanic wrote: | shiznix, please help.
Frame rate performance became not so good as some month before.
this is for example http://ubuntuone.com/2H8ul6Xm8obyZy8swiUSwJ
Frames changed sharply, not smoothly, BUT in fool screen mode all is OK.
I guess the problem is in compiz (may be).
What i must to check?
Thank you
ps: my card is nvidia 660m |
Perhaps your gfx rendering is running in software mode.
Doing the following should give you some info about that: Code: | /usr/libexec/nux/unity_support_test -p |
|
|
Back to top |
|
|
brothermechanic n00b
Joined: 10 Dec 2012 Posts: 37
|
Posted: Fri May 31, 2013 4:46 am Post subject: |
|
|
Code: |
$ /usr/libexec/nux/unity_support_test -p
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTX 660M/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 319.23
Not software rendered: yes
Not blacklisted: yes
GLX fbconfig: yes
GLX texture from pixmap: yes
GL npot or rect textures: yes
GL vertex program: yes
GL fragment program: yes
GL vertex buffer object: yes
GL framebuffer object: yes
GL version is 1.4+: yes
Unity 3D supported: yes
|
|
|
Back to top |
|
|
shiznix Guru
Joined: 29 Jun 2003 Posts: 367 Location: Adelaide, Australia
|
Posted: Fri May 31, 2013 8:03 am Post subject: |
|
|
brothermechanic wrote: | Code: |
$ /usr/libexec/nux/unity_support_test -p
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTX 660M/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 319.23
Not software rendered: yes
Not blacklisted: yes
GLX fbconfig: yes
GLX texture from pixmap: yes
GL npot or rect textures: yes
GL vertex program: yes
GL fragment program: yes
GL vertex buffer object: yes
GL framebuffer object: yes
GL version is 1.4+: yes
Unity 3D supported: yes
|
|
That seems OK, all running in hardware supported accelerated gfx mode.
Looked on launchpad.net for any reported bugs on the problem, it has definitely been a problem in the past specifically with Unity+Nvidia ( such as https://bugs.launchpad.net/ubuntu/+source/unity/+bug/988079 ) but nothing pops up recently...
Here are a couple of quick things to try:
1. Reset compiz using the command '/usr/bin/compiz.reset' as your desktop user within an Xsession
2. Get some more debug output from nux: Code: | - Emerge unity-base/nux with the 'debug' USE flag enabled, then:
echo 'export UNITY_LOG_SEVERITY="unity=DEBUG"' > /etc/X11/xinit/xinitrc.d/99-unity-debug
chmod +x /etc/X11/xinit/xinitrc.d/99-unity-debug
Restart xsession |
The log is written to your xsession logfile. I use GDM so for me it's ~/.cache/gdm/session.log
Also check ~/.xsession-errors and syslog files for any bad or strange messages.
Some other things to try might be to downgrade back to a lower nvidia driver version, or even try some of those 'workarounds' listed in that bug above if you get really desperate.
Yet another alternative is to try different nvidia driver packages, ie. x11-drivers/nvidia-drivers vs. x11-drivers/xf86-video-nouveau
Unfortunately I don't have any Nvidia hardware to test on anymore, but if I did then I'd try to reproduce the problem in native Ubuntu.
This would require a real Ubuntu installation, and not from within a VM so that gfx hardware acceleration can be tested.
Depends on how much trouble your willing to go with this, you might be able to get away with booting into a Ubuntu LiveUSB/CD/DVD to reproduce.
Only once it can be reproduced in the native Ubuntu would you have grounds for a bug report on launchpad.net (imo).
Sorry I couldn't be of more help but let us know how you get on, cheers! |
|
Back to top |
|
|
renegart Tux's lil' helper
Joined: 30 Oct 2012 Posts: 122
|
Posted: Fri May 31, 2013 9:27 am Post subject: |
|
|
Regarding performance, job-related I've a lot of dealings with nvidia-cards (on Windows). The focus of the 300 driver series are the new kepler-boards. Unfortunately this ends up in performance decreases for the old fermi (and older) boards. It would not surprise me, if the Linux drivers behave same.
The best driver for fermi boards is ~295.xx. Sadly this driver series is not maintained by nvidia any more, so it's not possible to use them with the current xserver-1.13 and newer.
So it can be, that you'll not get the old performance unless nvidia does it's homework or you get a keppler board.
I don't know what nvidia driver is used (recommend) at Ubuntu. If it's a 290 driver version, it's may good to check if they have some patches to get this version work with the current xserver. |
|
Back to top |
|
|
brothermechanic n00b
Joined: 10 Dec 2012 Posts: 37
|
Posted: Sun Jun 02, 2013 1:05 pm Post subject: |
|
|
Hi
Thank you for reply
I check perfomance on nvidia-drivers (310,313,319 from portage) - no profit
I execute /usr/bin/compiz.reset in tty mode - have big message (may be error? can' post it)
I debug unity - ~/.cache/gdm/session.log http://www.pasteall.org/42751
I create new user with default profile - no result.
No result(((
in fullscreen mode - good performance, in window mode - bad performance.
Please help me to tune compiz.
Thank you for help. |
|
Back to top |
|
|
alacheesu Tux's lil' helper
Joined: 01 Jun 2005 Posts: 113
|
Posted: Mon Jun 03, 2013 4:04 pm Post subject: |
|
|
When trying to compile unity-base/hud-13.04.0_p0_p01 I get
Code: | Making all in tools-vala
make[2]: Entering directory `/var/tmp/portage/unity-base/hud-13.04.0_p0_p01/work/hud-13.04.0daily13.04.03/tools-vala'
rm -f hud_gtk_vala.stamp && echo stamp > hud_gtk_vala.stamp-t
CDPATH="${ZSH_VERSION+.}:" && cd . && valac --pkg gtk+-3.0 -C hud-gtk.vala
/bin/sh: valac: command not found
make[2]: *** [hud_gtk_vala.stamp] Error 127
make[2]: Leaving directory `/var/tmp/portage/unity-base/hud-13.04.0_p0_p01/work/hud-13.04.0daily13.04.03/tools-vala'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/unity-base/hud-13.04.0_p0_p01/work/hud-13.04.0daily13.04.03'
make: *** [all] Error 2
* ERROR: unity-base/hud-13.04.0_p0_p01 failed (compile phase):
* emake failed
|
Indeed, /usr/bin/valac did not exist, just valac-0.{14,16,18,20}. I did ln -s /usr/bin/valac-0.20 /usr/bin/valac and it worked, but I don't know why it wasn't there in the first place. I have vala-0.20.1 installed. |
|
Back to top |
|
|
renegart Tux's lil' helper
Joined: 30 Oct 2012 Posts: 122
|
Posted: Mon Jun 03, 2013 5:15 pm Post subject: |
|
|
alacheesu wrote: | When trying to compile unity-base/hud-13.04.0_p0_p01 I get
Code: | Making all in tools-vala
make[2]: Entering directory `/var/tmp/portage/unity-base/hud-13.04.0_p0_p01/work/hud-13.04.0daily13.04.03/tools-vala'
rm -f hud_gtk_vala.stamp && echo stamp > hud_gtk_vala.stamp-t
CDPATH="${ZSH_VERSION+.}:" && cd . && valac --pkg gtk+-3.0 -C hud-gtk.vala
/bin/sh: valac: command not found
make[2]: *** [hud_gtk_vala.stamp] Error 127
make[2]: Leaving directory `/var/tmp/portage/unity-base/hud-13.04.0_p0_p01/work/hud-13.04.0daily13.04.03/tools-vala'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/unity-base/hud-13.04.0_p0_p01/work/hud-13.04.0daily13.04.03'
make: *** [all] Error 2
* ERROR: unity-base/hud-13.04.0_p0_p01 failed (compile phase):
* emake failed
|
Indeed, /usr/bin/valac did not exist, just valac-0.{14,16,18,20}. I did ln -s /usr/bin/valac-0.20 /usr/bin/valac and it worked, but I don't know why it wasn't there in the first place. I have vala-0.20.1 installed. |
It seems, the package needs vala-0.18 as dependency.
Can you paste the complete build log, please? |
|
Back to top |
|
|
shiznix Guru
Joined: 29 Jun 2003 Posts: 367 Location: Adelaide, Australia
|
Posted: Mon Jun 03, 2013 11:12 pm Post subject: |
|
|
renegart wrote: | alacheesu wrote: | When trying to compile unity-base/hud-13.04.0_p0_p01 I get
Code: | Making all in tools-vala
make[2]: Entering directory `/var/tmp/portage/unity-base/hud-13.04.0_p0_p01/work/hud-13.04.0daily13.04.03/tools-vala'
rm -f hud_gtk_vala.stamp && echo stamp > hud_gtk_vala.stamp-t
CDPATH="${ZSH_VERSION+.}:" && cd . && valac --pkg gtk+-3.0 -C hud-gtk.vala
/bin/sh: valac: command not found
make[2]: *** [hud_gtk_vala.stamp] Error 127
make[2]: Leaving directory `/var/tmp/portage/unity-base/hud-13.04.0_p0_p01/work/hud-13.04.0daily13.04.03/tools-vala'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/unity-base/hud-13.04.0_p0_p01/work/hud-13.04.0daily13.04.03'
make: *** [all] Error 2
* ERROR: unity-base/hud-13.04.0_p0_p01 failed (compile phase):
* emake failed
|
Indeed, /usr/bin/valac did not exist, just valac-0.{14,16,18,20}. I did ln -s /usr/bin/valac-0.20 /usr/bin/valac and it worked, but I don't know why it wasn't there in the first place. I have vala-0.20.1 installed. |
It seems, the package needs vala-0.18 as dependency.
Can you paste the complete build log, please? |
Fix committed to setup the needed VALA environment variables using vala.eclass
Safe and recommended you remove the /usr/bin/valac symlink now. |
|
Back to top |
|
|
shiznix Guru
Joined: 29 Jun 2003 Posts: 367 Location: Adelaide, Australia
|
Posted: Mon Jun 03, 2013 11:53 pm Post subject: |
|
|
brothermechanic wrote: | Hi
Thank you for reply
I check perfomance on nvidia-drivers (310,313,319 from portage) - no profit
I execute /usr/bin/compiz.reset in tty mode - have big message (may be error? can' post it)
I debug unity - ~/.cache/gdm/session.log http://www.pasteall.org/42751
I create new user with default profile - no result.
No result(((
in fullscreen mode - good performance, in window mode - bad performance.
Please help me to tune compiz.
Thank you for help. |
/usr/bin/compiz.reset needs to be run as your desktop user inside a desktop environment using an xterm (not a tty).
Thanks for the session.log, lots of info.
Some GTK errors there in your session.log that can occur with the gtk overlay scrollbar, so you can try and disable it.
Overlay scrollbar is disabled in System Settings > Unity Tweak Tool > Scrolling > Scrollbars > Legacy
You might need to log out of your Xsession and back in if this is to make any impact on window performance.
There also looks to be some errors in your ~/.nvidia-settings-rc file that may not be helping. |
|
Back to top |
|
|
alacheesu Tux's lil' helper
Joined: 01 Jun 2005 Posts: 113
|
Posted: Thu Jun 06, 2013 8:36 pm Post subject: |
|
|
shiznix wrote: | Fix committed to setup the needed VALA environment variables using vala.eclass
Safe and recommended you remove the /usr/bin/valac symlink now. |
Thanks. It works now.
I ran into another problem, the ebuild for unity-tweak-tool seems to look for the wrong file.
Code: | >>> Emerging (1 of 1) unity-extra/unity-tweak-tool-0.0.4_p_p0001 from unity-gentoo
!!! Fetched file: unity-tweak-tool_0.0.4_.tar.gz VERIFY FAILED!
!!! Reason: Insufficient data for checksum verification
!!! Got:
!!! Expected: MD5 RMD160 SHA1 SHA256 SHA512 WHIRLPOOL
* Fetch failed for 'unity-extra/unity-tweak-tool-0.0.4_p_p0001', Log file:
* '/var/log/portage/unity-extra:unity-tweak-tool-0.0.4_p_p0001:20130606-203253.log'
|
|
|
Back to top |
|
|
shiznix Guru
Joined: 29 Jun 2003 Posts: 367 Location: Adelaide, Australia
|
Posted: Fri Jun 07, 2013 12:21 am Post subject: |
|
|
alacheesu wrote: | shiznix wrote: | Fix committed to setup the needed VALA environment variables using vala.eclass
Safe and recommended you remove the /usr/bin/valac symlink now. |
Thanks. It works now.
I ran into another problem, the ebuild for unity-tweak-tool seems to look for the wrong file.
Code: | >>> Emerging (1 of 1) unity-extra/unity-tweak-tool-0.0.4_p_p0001 from unity-gentoo
!!! Fetched file: unity-tweak-tool_0.0.4_.tar.gz VERIFY FAILED!
!!! Reason: Insufficient data for checksum verification
!!! Got:
!!! Expected: MD5 RMD160 SHA1 SHA256 SHA512 WHIRLPOOL
* Fetch failed for 'unity-extra/unity-tweak-tool-0.0.4_p_p0001', Log file:
* '/var/log/portage/unity-extra:unity-tweak-tool-0.0.4_p_p0001:20130606-203253.log'
|
|
Had been finessing the ubuntu-versionator.eclass and introduced that bug
Sync up, should be fixed now. |
|
Back to top |
|
|
SayusiAndo n00b
Joined: 11 Jun 2013 Posts: 30 Location: Budapest, Hungary
|
Posted: Tue Jun 11, 2013 5:26 pm Post subject: X11 drivers |
|
|
Hi Guys,
First of all I would like to say thank you for your job to have unity on Gentoo! I really appreciate what you guys are doing!
I would like to ask some help regarding the must have x11 drivers. As far as I can see to install unity on Gentoo requires vmware, nouveau and intel drivers. Is there a way not to force them to emerge? I had to install them and now I have to recompile my kernel due to intel driver. I'm sure I won't use any of them because I have a nice nvidia card.
I appreciate your answer! |
|
Back to top |
|
|
SayusiAndo n00b
Joined: 11 Jun 2013 Posts: 30 Location: Budapest, Hungary
|
Posted: Thu Jun 13, 2013 7:12 am Post subject: Re: X11 drivers |
|
|
SayusiAndo wrote: | Hi Guys,
First of all I would like to say thank you for your job to have unity on Gentoo! I really appreciate what you guys are doing!
I would like to ask some help regarding the must have x11 drivers. As far as I can see to install unity on Gentoo requires vmware, nouveau and intel drivers. Is there a way not to force them to emerge? I had to install them and now I have to recompile my kernel due to intel driver. I'm sure I won't use any of them because I have a nice nvidia card.
I appreciate your answer! |
Ok, the question is not valid anymore. I have Unity on my desktop. Nice! Thanks for your job again! |
|
Back to top |
|
|
SayusiAndo n00b
Joined: 11 Jun 2013 Posts: 30 Location: Budapest, Hungary
|
Posted: Fri Jul 05, 2013 3:56 pm Post subject: |
|
|
Hi All again,
I would like to ask some help! After I restart my system the launcher (the fancy menu at left hand) and the taskbar (top of the page) do not appears. I haven't found anything in the logs. Can you give some suggestions about where can I find meaningful logs to figure out why this happened?
I appreciate your help! _________________ - -
-- Csanyi Andras/Sayusi Ando --
-- "Trust in God and keep the gunpowder dry!!" - Cromwell |
|
Back to top |
|
|
renegart Tux's lil' helper
Joined: 30 Oct 2012 Posts: 122
|
Posted: Fri Jul 05, 2013 4:16 pm Post subject: |
|
|
SayusiAndo wrote: | Hi All again,
I would like to ask some help! After I restart my system the launcher (the fancy menu at left hand) and the taskbar (top of the page) do not appears. I haven't found anything in the logs. Can you give some suggestions about where can I find meaningful logs to figure out why this happened?
I appreciate your help! |
It sound you have to reset compiz. We had this topic a while ago. Please have a look at page 20, starting with the post of RussK from 20.05. 2013 |
|
Back to top |
|
|
SayusiAndo n00b
Joined: 11 Jun 2013 Posts: 30 Location: Budapest, Hungary
|
Posted: Sat Jul 06, 2013 3:54 pm Post subject: |
|
|
renegart wrote: | SayusiAndo wrote: | Hi All again,
I would like to ask some help! After I restart my system the launcher (the fancy menu at left hand) and the taskbar (top of the page) do not appears. I haven't found anything in the logs. Can you give some suggestions about where can I find meaningful logs to figure out why this happened?
I appreciate your help! |
It sound you have to reset compiz. We had this topic a while ago. Please have a look at page 20, starting with the post of RussK from 20.05. 2013 |
Thanks!
I have checked and you were right I had to reset compiz. Now, it is working fine. _________________ - -
-- Csanyi Andras/Sayusi Ando --
-- "Trust in God and keep the gunpowder dry!!" - Cromwell |
|
Back to top |
|
|
SayusiAndo n00b
Joined: 11 Jun 2013 Posts: 30 Location: Budapest, Hungary
|
Posted: Mon Jul 15, 2013 5:51 pm Post subject: |
|
|
Hi Guys,
I would like to ask about network management in unity. I put together a system on my girlfriend's laptop because she is fed up with Ubuntu. But there is no nm-applet available on the tray - vertical menu. If I open the "Network" software then it says that my system is not compatible. If I open the Network Connections then I'm not able to add or change anything because everything is inactive.
My girlfriend is working on her laptop and she is moving everywhere and I really want her to suffer with scripts. I want her to use a good applet which helps her to find a wireless network and connect to it easily.
How is possible to solve it this issue? _________________ - -
-- Csanyi Andras/Sayusi Ando --
-- "Trust in God and keep the gunpowder dry!!" - Cromwell |
|
Back to top |
|
|
|