View previous topic :: View next topic |
Author |
Message |
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Thu May 02, 2013 2:49 pm Post subject: [solved]Gnome problem !!! |
|
|
Hi guys :
Today I somehow collapsed my gentoo ! I was working with my gentoo and when I restart it my gnome has been crashed ! and I faced with error "oh no!something has gone wrong" I wanted to fix it with rebuilding gnome-base/gdm and gnome-shell ! and I did a stupid action and I remove both of them in order to emerge them again and now I face lots of problems ! I unmask gdm automatically but now there are yet some problems to install it ! I even can't emerge -u world or revdep-rebuild both of them will have error because of dependencies !because I don't have graphical view I should work with console and working with it makes me crazy !I have forgotten the command which I used for pasting code in internet so at first please tell me this and then I can paste you my info here for you to help me !!
any idea?
Last edited by haleh on Fri May 10, 2013 9:31 pm; edited 1 time in total |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Thu May 02, 2013 3:14 pm Post subject: |
|
|
wgetpaste /path/filename to paste a file
command | wgetpaste to paste the output of a command _________________ Defund the FCC. |
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Thu May 02, 2013 6:27 pm Post subject: |
|
|
emerge -atuvND world should build according to your paste, suggest Code: | emerge -uND --keep-going world | to get that done. _________________ Defund the FCC. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Thu May 02, 2013 6:46 pm Post subject: |
|
|
Code: | emerge -av =sys-apps/shadow-4.1.5-r1
emerge -av =sys-auth/pambase-20120417-r1 | see if that gets done _________________ Defund the FCC. |
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Thu May 02, 2013 6:54 pm Post subject: |
|
|
ok I do now
#emerge -uND --keep-going world
www.bpaste.net/show/95923
and also it has error that wget doesn't show !I am trying to find a way to show it |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Thu May 02, 2013 6:56 pm Post subject: |
|
|
Code: | emerge -C udev
emerge systemd | apparently you have reached the point where systemd absorbs udev. Good luck. _________________ Defund the FCC. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Thu May 02, 2013 7:03 pm Post subject: |
|
|
Code: | emerge -uND --keep-going world > ew
wgetpaste ew | should show all _________________ Defund the FCC. |
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Thu May 02, 2013 7:19 pm Post subject: |
|
|
DONAHUE wrote: | Code: | emerge -C udev
emerge systemd | apparently you have reached the point where systemd absorbs udev. Good luck. |
how do you understand this ?? |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Thu May 02, 2013 8:43 pm Post subject: |
|
|
google udev and systemd
read the systemd ebuild _________________ Defund the FCC. |
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Fri May 03, 2013 11:13 am Post subject: |
|
|
DONAHUE wrote: | google udev and systemd
read the systemd ebuild |
after I emerge -C udev ! I will lose somehow everything !what do you suggest me ?help me !!!PLZ !!!?( I don't have time to install everything !what can I do ? |
|
Back to top |
|
|
GFCCAE6xF Apprentice
Joined: 06 Aug 2012 Posts: 295
|
Posted: Fri May 03, 2013 11:56 am Post subject: |
|
|
DONAHUE wrote: | Code: | emerge -C udev
emerge systemd | apparently you have reached the point where systemd absorbs udev. Good luck. |
This is completely false.
haleh, you have systemd use flag set on at least one package (gnome-shell, I gave up looking after the first instance). Add -systemd to your use flags in make.conf. |
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Sat May 04, 2013 4:35 am Post subject: |
|
|
I add systemd to make.conf now emerge gnome-base/gdm:
www.bpaste.net/show/96282 |
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Sat May 04, 2013 5:32 am Post subject: |
|
|
Code: | emerge -atuND world
calculating dependencies!
!!!The ebuild selected to satisfy ">=net-misc/networkmanager-0.8.999[introspection]"has unmet requirements.
-net-misc/networkmanager-0.9.6.4-r1 :: gentoo USE = "bluetooth consolekit dhcpd introspection nss ppp systemd wext -avahi -connection-sharing -dhclient -doc -gnutls -modemmanager -resolvconf -vala -wimax "
The following REQUIRED_USE flag constriants are unsatisfied :
at-most-one-of(consolekit systemd)
The above constriants are a subset of the following complete expression :
modemmanager?(ppp) exactly-one-of (nss gnutls) exactly-one-of(dhclient dhcpcd)exactly-one-of(consolekit systemd)
dependency required by "gnome-base/gnome-shell-3.6.3.1[networkmanager]"[ebuild]
dependency required by "gnome-extra/gnome-shell-extension-3.6.2"[ebuild]
dependency required by "@selected"[set]
dependency required by "@world"[argument] |
This is my package.use:
Code: | x11-base/xorg-server udev
gnome-base/gnome-session branding
#USE changes for emerging gnome-base/gnome-shell
dev-libs/libnl -doc
app-text/dvipsk -doc -source
dev-libs/libksba -static-libs
dev-libs/libassuan -static-libs
app-admin/apg cracklib
dev-libs/libnl -static-libs -utils
dev-libs/pth -debug -static-libs
media-fonts/cantarell X
# move x11-libs/qt-core dev-qt/qtcore
dev-qt/qtcore -debug*
# move x11-libs/qt-script dev-qt/qtscript
dev-qt/qtscript -debug*
# move x11-libs/qt-dbus dev-qt/qtdbus
dev-qt/qtdbus -debug*
# move x11-libs/qt-gui dev-qt/qtgui
dev-qt/qtgui -debug*
# move x11-libs/qt-sql dev-qt/qtsql
dev-qt/qtsql -debug*
# move x11-libs/qt-qt3support dev-qt/qt3support
dev-qt/qt3support -debug*
# move x11-libs/qt-svg dev-qt/qtsvg
dev-qt/qtsvg accessibility -debug exceptions (-aqua) (-c++0x) -pch (-qpa)
x11-libs/libXp -static-libs
net-libs/liboauth nss -bindist -curl -doc
dev-python/dbus-python -doc -examples -test
app-text/opensp nls -doc -static-libs -test
dev-python/pycurl -examples
dev-lang/spidermonkey -debug -static-libs -test
www-client/lynx bzip2 ipv6 nls ssl unicode -cjk -gnutls -idn
dev-lang/vala vapigen -test
dev-lang/vala vapigen -test
app-text/openjade -static-libs
app-text/xmlto -latex
dev-lang/vala vapigen -test
dev-libs/gobject-introspection -doctool%
x11-libs/gdk-pixbuf -debug*
x11-libs/pango -debug*
dev-libs/json-glib -debug introspection -doc
net-libs/telepathy-glib -debug introspection vala -test
dev-libs/libgee introspection
gnome-base/gsettings-desktop-schemas introspection%*
net-libs/libsoup -debug*
dev-libs/gjs -examples -test
app-accessibility/at-spi2-core introspection -doc
media-libs/cogl -debug introspection opengl pango -doc -examples -gles2 -test
net-im/telepathy-logger introspection -doc -test
media-libs/gst-plugins-bad orc
sys-apps/accountsservice introspection vala -doc
dev-python/pycups -doc -examples
x11-libs/gtk+ X%* debug* (-wayland)
net-dialup/ppp gtk ipv6 pam -activefilter -atm -dhcp -eap-tls -radius
media-libs/clutter debug gtk introspection -doc -test
gnome-base/gnome-desktop -debug introspection -doc
gnome-base/libgnomekbd introspection%*
gnome-base/gnome-desktop -debug introspection -doc
net-libs/webkit-gtk -debug gstreamer introspection jit spell (-aqua) -coverage -doc -test -webgl
media-libs/clutter-gtk -debug introspection -doc -examples
x11-libs/mx -dbus debug gtk introspection startup-notification -doc -glade
media-libs/clutter-gst -debug introspection -doc -examples
media-video/cheese -debug introspection -doc -sendto -test
dev-libs/zziplib sdl -doc -static-libs -test
gnome-base/gnome-menus -debug introspection python -test
dev-python/pyatspi -test
app-admin/system-config-printer-common policykit -doc
app-crypt/pinentry gtk ncurses qt4 -caps -static
net-wireless/wpa_supplicant dbus debug qt4 readline ssl -eap-sim -fasteap -gnutls -madwifi (-ps3) (-selinux) -wimax -wps
app-crypt/gnupg bzip2 ldap nls readline usb -adns -doc (-selinux) -smartcard -static
dev-tex/luatex -doc
app-text/texlive-core X -cjk -doc -source -tk -xetex
dev-texlive/texlive-documentation-base -source
dev-texlive/texlive-basic -doc -source
dev-texlive/texlive-genericrecommended -doc -source
dev-texlive/texlive-fontsrecommended -doc -source
dev-texlive/texlive-fontutils -doc -source
dev-texlive/texlive-latex -doc -source
dev-texlive/texlive-latexrecommended -doc -source
app-text/docbook-sgml-utils jadetex
gnome-extra/gnome-color-manager -clutter (-packagekit) -raw
dev-python/notify-python -examples
x11-wm/mutter -debug introspection -test -xinerama
sys-apps/kmod -debug tools zlib -doc -lzma -static-libs
app-crypt/gcr -debug introspection -doc -test
gnome-base/gnome-keyring -debug* -caps% (-selinux)
gnome-base/libgnome-keyring -debug* introspection%*
dev-python/gnome-keyring-python -examples
app-admin/system-config-printer-gnome gnome-keyring -ar -as -bg -bn -bn_IN -br -bs -ca -cs -cy -da -de -el -en_GB -es -et -fa -fi -fr -gu -he -hi -hr -hu -hy -id -is -it -ja -ka -kn -ko -lo -lv -mai -mk -ml -mr -ms -nb -nl -nn -or -pa -pl -pt -pt_BR -ro -ru -si -sk -sl -sr -sr@latin -sv -ta -te -th -tr -uk -vi -zh_CN -zh_TW
net-libs/libsoup-gnome -debug*
net-libs/rest gnome introspection -doc -test
dev-libs/libgdata -debug* -static-libs%
dev-libs/libgweather introspection%*
net-libs/gnome-online-accounts -debug gnome introspection -doc
gnome-extra/evolution-data-server gnome-online-accounts%* introspection%* vala%*
net-wireless/gnome-bluetooth -debug introspection -doc -sendto
sys-fs/udev introspection* openrc%* -doc% -static-libs%
sys-apps/systemd acl pam tcpd -audit -cryptsetup -lzma -plymouth (-selinux)
gnome-base/gnome-settings-daemon colord%* cups%* -debug* short-touchpad-timeout%* systemd%* udev%* (-packagekit) -test% -wacom%
gnome-base/gnome-session -debug* systemd%*
net-libs/libsocialweb gnome introspection networkmanager vala -connman -doc
gnome-extra/nm-applet bluetooth
gnome-base/gnome-control-center bluetooth%* cheese%* colord%* cups%* -debug* gnome-online-accounts%* networkmanager%* socialweb%* systemd%* -wacom%
net-im/telepathy-mission-control gnome-keyring networkmanager upower
dev-libs/folks -debug eds socialweb vala -test -tracker -utils
gnome-base/gnome-shell bluetooth networkmanager systemd
gnome-extra/evolution-data-server vala
net-misc/networkmanage bluetooth consolekit dhcpd introspection nss ppp systemd wext -avahi -connection-sharing -dhclient -doc -gnutls -modemmanager -resolvconf -vala -winax
#required by media-video/vlc-2.0.3, required by media-video/vlc (argument)
>=sys-libs/zlib-1.2.7 minizip
=media-gfx/gnome-font-viewer-3.6.2 ~x86
# required by gnome-base/gnome-shell-3.6.3.1[i18n]
# required by gnome-base/gdm-3.6.2[gnome-shell]
# required by gnome-base/gdm (argument)
>=app-i18n/ibus-1.5.1-r2 dconf
# required by www-client/firefox-20.0.1[gstreamer]
# required by @selected
# required by @world (argument)
>=media-plugins/gst-plugins-meta-0.10-r8:0.10 ffmpeg
# required by dev-util/kdevelop-4.4.1
# required by @selected
# required by @world (argument)
>=dev-qt/qtdeclarative-4.8.4 webkit |
what does this mean ?I think if I solve this everything will be ok !
any idea ?
why wgetpaste even the way DONAHUE said can't paste this ? |
|
Back to top |
|
|
GFCCAE6xF Apprentice
Joined: 06 Aug 2012 Posts: 295
|
Posted: Sat May 04, 2013 9:11 am Post subject: |
|
|
Wait, do you want to use systemd? I was under the impression that you didn't after your reaction to DONAHUE, and advised you to add -systemd
If you want to use systemd you will have to read the wiki and docs cause it will need setting up first.
Your last blocker seems to be because you have both consolekit and systemd enabled, logind (included in systemd) provides the new consolekit. So you need to disable/mask the consolekit flag.
Oh, and whilst I was skimming over your OP again I came across your complaint about not having graphical environment - if you keep a sysrescuecd around you can boot up in to an xfce environment at correct resolutions - then you can just chroot in in a term and browse the web at the same time |
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Sun May 05, 2013 10:27 am Post subject: |
|
|
rorgoroth wrote: |
Wait, do you want to use systemd? I was under the impression that you didn't after your reaction to DONAHUE, and advised you to add -systemd
If you want to use systemd you will have to read the wiki and docs cause it will need setting up first.
Your last blocker seems to be because you have both consolekit and systemd enabled, logind (included in systemd) provides the new consolekit. So you need to disable/mask the consolekit flag.
Oh, and whilst I was skimming over your OP again I came across your complaint about not having graphical environment - if you keep a sysrescuecd around you can boot up in to an xfce environment at correct resolutions - then you can just chroot in in a term and browse the web at the same time |
rorgoroth: ok !What do you suggest ?using systemd?it seems that it is not recommended by gentoo but I don't have problem with trying it !!Is there any way to restore udev?Is there any doc except http://wiki.gentoo.org/wiki/Systemd for systemd? |
|
Back to top |
|
|
GFCCAE6xF Apprentice
Joined: 06 Aug 2012 Posts: 295
|
Posted: Sun May 05, 2013 10:58 am Post subject: |
|
|
haleh wrote: |
rorgoroth: ok !What do you suggest ?using systemd?it seems that it is not recommended by gentoo but I don't have problem with trying it !!Is there any way to restore udev?Is there any doc except http://wiki.gentoo.org/wiki/Systemd for systemd? |
Well, I would personally suggest at least trying it, especially with a DE like Gnome 3.
I'm not sure what you mean by restore udev, systemd provides udev, if you remove systemd you should be able to run update commands and 'udev standalone' will be installed again.
Also, yes, that page is good and will be more then sufficient to get you set up
The only other thing, unless it has changed it that sometimes the USE flag is masked so you need do this:
/etc/portage/profile/use.mask wrote: | consolekit
-systemd
|
|
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Thu May 09, 2013 8:39 pm Post subject: |
|
|
@rorgoroth:Thanks for your suggestion and sorry for my delay ,I had midterm exam and unfortunately no time !now I am ok ! I think it is better to recover my gentoo completely without any broken then I will try systemd ! I work somehow on it and something good and bad happened!at first emerge gnome-base ran and it emerged some app but when it reached gnome-base/gnome-shell it failed then when I emerge --sync it failed and I don't have any idea why this is happen and also when I ran emerge -uatvND world some app failed to emerge !These are errors
emerge gnome-base/gnome-shell
http://www.bpaste.net/show/96518/
any idea ? I don't think it is related to systemd,isn't it ?what should I do ?what should I fix first and how? |
|
Back to top |
|
|
GFCCAE6xF Apprentice
Joined: 06 Aug 2012 Posts: 295
|
Posted: Fri May 10, 2013 8:43 am Post subject: |
|
|
Code: | /usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../i686-pc-linux-gnu/bin/ld: warning: libjson.so.0, needed by /usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse-mainloop-glib.so, not found (try using -rpath or -rpath-link)
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../i686-pc-linux-gnu/bin/ld: warning: libgdbm.so.3, needed by /usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse-mainloop-glib.so, not found (try using -rpath or -rpath-link)
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_array_length'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_new_string'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_get_type'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_array_get_idx'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_get_string'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_tokener_parse'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_get_int'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_object_add'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_new_int'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_array_add'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_object_get'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_new_array'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_new_object'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_put'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_to_json_string'
collect2: ld returned 1 exit status
linking of temporary binary failed: Command '['/bin/sh', '../libtool', '--mode=link', '--tag=CC', 'gcc', '-o', '/var/tmp/portage/gnome-base/gnome-shell-3.6.3.1/work/gnome-shell-3.6.3.1/src/tmp-introspectdsMQSp/Gvc-1.0', '-export-dynamic', '-O2', '-march=i686', '-pipe', '-Wall', '-Wmissing-prototypes', '-Wl,-O1', '-Wl,--as-needed', '/var/tmp/portage/gnome-base/gnome-shell-3.6.3.1/work/gnome-shell-3.6.3.1/src/tmp-introspectdsMQSp/Gvc-1.0.o', '-L.', 'libgvc.la', '-lgio-2.0', '-lgobject-2.0', '-Wl,--export-dynamic', '-lgmodule-2.0', '-pthread', '-lglib-2.0']' returned non-zero exit status 1
make[3]: *** [Gvc-1.0.gir] Error 1 |
# emerge -vu1 pulseaudio
Edit, forgot, make sure you update it to 3.0-r1:
Code: | *pulseaudio-3.0-r1 (27 Apr 2013)
Fix compilation with json-c 0.11 (bug #467280) |
Then try it again |
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Fri May 10, 2013 7:07 pm Post subject: |
|
|
rorgoroth wrote: | Code: | /usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../i686-pc-linux-gnu/bin/ld: warning: libjson.so.0, needed by /usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse-mainloop-glib.so, not found (try using -rpath or -rpath-link)
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../i686-pc-linux-gnu/bin/ld: warning: libgdbm.so.3, needed by /usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse-mainloop-glib.so, not found (try using -rpath or -rpath-link)
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_array_length'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_new_string'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_get_type'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_array_get_idx'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_get_string'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_tokener_parse'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_get_int'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_object_add'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_new_int'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_array_add'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_object_get'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_new_array'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_new_object'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_put'
/usr/lib/gcc/i686-pc-linux-gnu/4.6.3/../../../../lib/libpulse.so: undefined reference to `json_object_to_json_string'
collect2: ld returned 1 exit status
linking of temporary binary failed: Command '['/bin/sh', '../libtool', '--mode=link', '--tag=CC', 'gcc', '-o', '/var/tmp/portage/gnome-base/gnome-shell-3.6.3.1/work/gnome-shell-3.6.3.1/src/tmp-introspectdsMQSp/Gvc-1.0', '-export-dynamic', '-O2', '-march=i686', '-pipe', '-Wall', '-Wmissing-prototypes', '-Wl,-O1', '-Wl,--as-needed', '/var/tmp/portage/gnome-base/gnome-shell-3.6.3.1/work/gnome-shell-3.6.3.1/src/tmp-introspectdsMQSp/Gvc-1.0.o', '-L.', 'libgvc.la', '-lgio-2.0', '-lgobject-2.0', '-Wl,--export-dynamic', '-lgmodule-2.0', '-pthread', '-lglib-2.0']' returned non-zero exit status 1
make[3]: *** [Gvc-1.0.gir] Error 1 |
# emerge -vu1 pulseaudio
Edit, forgot, make sure you update it to 3.0-r1:
Code: | *pulseaudio-3.0-r1 (27 Apr 2013)
Fix compilation with json-c 0.11 (bug #467280) |
Then try it again |
Thanks!it worked now I have gnome again but this version seems strange ! I can't open background and user account in system setting !! Is this bug ??I searched but I find nothing and also I don't have file manager I think my nautilus is broken ! what do you think ? |
|
Back to top |
|
|
GFCCAE6xF Apprentice
Joined: 06 Aug 2012 Posts: 295
|
Posted: Fri May 10, 2013 7:20 pm Post subject: |
|
|
No problem
Honestly... I have no idea and cannot help with Gnome itself unfortunately, the last time I used it myself was back around ~2006 |
|
Back to top |
|
|
haleh Tux's lil' helper
Joined: 06 Jul 2012 Posts: 127
|
Posted: Fri May 10, 2013 9:31 pm Post subject: |
|
|
rorgoroth wrote: | No problem
Honestly... I have no idea and cannot help with Gnome itself unfortunately, the last time I used it myself was back around ~2006 |
Thanks ! I fixed it |
|
Back to top |
|
|
|