| View previous topic :: View next topic |
| Author |
Message |
AgBr
Apprentice
Joined: 06 Nov 2010
Posts: 195
|
 Posted: Tue Apr 23, 2013 8:07 am Post subject: [solved] synaptics touchpad not tapping and edgescroll |
 |
|
After the last update yesterday:
[I] x11-drivers/xf86-input-synaptics
Available versions: 1.4.0 ~1.5.2 1.6.2-r1{tbz2} ~1.6.3 ~1.7.0
Installed versions: 1.6.2-r1{tbz2}(17:38:53 22.04.2013)
Homepage: http://cgit.freedesktop.org/xorg/driver/xf86-input-synaptics/
Description: Driver for Synaptics touchpads
finger tapping and edge scrolling doesn't work anymore. I have a minimal 80-touchpad.conf in xorg.conf.d:
Section "InputClass"
Identifier "touchpad"
Driver "synaptics"
Option "SHMConfig" "on"
Option "VertEdgeScroll" "1"
Option "HorizEdgeScroll" "1"
MatchIsTouchpad "on"
EndSection
which used to work up till now.
The relevant portion of Xorg.log
| Code: | [ 2881.806] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2881.806] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2881.806] (**) Option "Device" "/dev/input/event4"
[ 2881.913] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 2881.913] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 2881.913] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2881.913] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2881.913] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 2881.913] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2881.913] (**) Option "VertEdgeScroll" "1"
[ 2881.913] (**) Option "HorizEdgeScroll" "1"
[ 2881.913] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2881.913] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2881.966] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 2881.966] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 2881.966] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2881.966] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 2881.966] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 2881.967] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2881.967] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2881.967] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2881.967] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2881.967] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2881.968] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2881.968] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2881.968] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[ 2881.968] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 2881.968] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 2881.969] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 2881.969] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[ 2881.969] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 2881.969] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 2881.969] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 2881.969] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 2881.969] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 2881.969] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 2881.969] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2881.969] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input6/event6"
[ 2881.969] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 11)
[ 2881.969] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 2881.970] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 2881.970] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 2881.970] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 2881.970] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 2881.970] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 2881.970] (II) No input driver specified, ignoring this device.
[ 2881.970] (II) This device may have been added with another device file.
[ 2881.971] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 2881.971] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 2881.971] (**) ThinkPad Extra Buttons: Applying InputClass "keyboard"
[ 2881.971] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 2881.971] (**) ThinkPad Extra Buttons: always reports core events
|
Any hint on what's going on here will be appreciated
Last edited by AgBr on Wed Apr 24, 2013 1:45 pm; edited 1 time in total |
|
| Back to top |
|
 |
Hypnos
Advocate
Joined: 18 Jul 2002
Posts: 2889
Location: Omnipresent
|
| Posted: Tue Apr 23, 2013 1:27 pm Post subject: |
|
|
I wonder if this is the problem:
| Code: | | [ 2881.968] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" |
I use the same driver version; here's my touchpad conf:
| Code: | Section "InputClass"
Identifier "touchpad catchall"
MatchIsTouchpad "on"
Option "HorizEdgeScroll" "on"
Option "VertEdgeScroll" "true"
EndSection |
Note that I don't specify the driver, and that I leave tapping turned off since I only use the touchpad for scroll.
_________________
Personal overlay | Simple backup scheme |
|
| Back to top |
|
|
AgBr
Apprentice
Joined: 06 Nov 2010
Posts: 195
|
| Posted: Wed Apr 24, 2013 1:44 pm Post subject: |
|
|
Thanks Hypnos,
as it seems, the identifier did the trick. As I understand it so far, there seems to be a standard identifier with the name "touchpad" so my directive gets ignored. After setting it to "touchpad catchall" all is running fine now. |
|
| Back to top |
|
|
|
Kernel & Hardware
