Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Wentylator pracujący cały czas na pełnych obrotach LAPTOP
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish)
View previous topic :: View next topic  
Author Message
and1987
n00b
n00b


Joined: 09 Mar 2010
Posts: 39

PostPosted: Fri Jan 25, 2013 4:06 pm    Post subject: Wentylator pracujący cały czas na pełnych obrotach LAPTOP Reply with quote

Problem polega na tym, że gdy mam odłączone zasilanie to wentylator nie pracuje, zaraz po włączeniu zasilania sieciowego zaczyna pracować wentylator na pełnych obrotch (oczywiście system nie jest w żaden sposób obciążony), gdy odłącze zasilacz wentylator się wyłącza.

Dodam, że mam zainstalowane laptop mode tools.

Czy idzie w jakiś sposób to skonfigurować może przez: /sys/class/hwmon /sys/class/power_supply bądz laptop-mode.conf żeby przy włączonym zasilaczu wentylator automatycznie (system nie obciążony) nie pracował cały czas na pełnych obrotach

# ls -l /sys/class/hwmon/hwmon0/
Code:
root@ja-Inspiron-7520:~# ls -l /sys/class/hwmon/hwmon0/
total 0
lrwxrwxrwx 1 root root    0 Jan 25 12:00 device -> ../../../coretemp.0
drwxr-xr-x 2 root root    0 Jan 25 16:55 power
lrwxrwxrwx 1 root root    0 Jan 25 12:00 subsystem -> ../../../../../class/hwmon
-rw-r--r-- 1 root root 4096 Jan 25 12:00 uevent


ls -l /sys/class/hwmon/hwmon0/device/
Code:
root@ja-Inspiron-7520:~# ls -l /sys/class/hwmon/hwmon0/device/
driver/           temp1_input       temp3_crit        temp4_label
hwmon/            temp1_label       temp3_crit_alarm  temp4_max
modalias          temp1_max         temp3_input       temp5_crit
name              temp2_crit        temp3_label       temp5_crit_alarm
power/            temp2_crit_alarm  temp3_max         temp5_input
subsystem/        temp2_input       temp4_crit        temp5_label
temp1_crit        temp2_label       temp4_crit_alarm  temp5_max
temp1_crit_alarm  temp2_max         temp4_input       uevent


ls -l /sys/class/power_supply/BAT1/
Code:
root@ja-Inspiron-7520:~# ls -l /sys/class/power_supply/BAT1/
total 0
-rw-r--r-- 1 root root 4096 Jan 25 12:06 alarm
-r--r--r-- 1 root root 4096 Jan 25 16:57 cycle_count
lrwxrwxrwx 1 root root    0 Jan 25 16:57 device -> ../../../PNP0C0A:00
-r--r--r-- 1 root root 4096 Jan 25 12:00 energy_full
-r--r--r-- 1 root root 4096 Jan 25 12:00 energy_full_design
-r--r--r-- 1 root root 4096 Jan 25 12:00 energy_now
-r--r--r-- 1 root root 4096 Jan 25 12:00 manufacturer
-r--r--r-- 1 root root 4096 Jan 25 12:00 model_name
drwxr-xr-x 2 root root    0 Jan 25 16:57 power
-r--r--r-- 1 root root 4096 Jan 25 12:00 power_now
-r--r--r-- 1 root root 4096 Jan 25 12:00 present
-r--r--r-- 1 root root 4096 Jan 25 12:00 serial_number
-r--r--r-- 1 root root 4096 Jan 25 12:00 status
lrwxrwxrwx 1 root root    0 Jan 25 11:59 subsystem -> ../../../../../../../../class/power_supply
-r--r--r-- 1 root root 4096 Jan 25 12:00 technology
-r--r--r-- 1 root root 4096 Jan 25 12:00 type
-rw-r--r-- 1 root root 4096 Jan 25 11:59 uevent
-r--r--r-- 1 root root 4096 Jan 25 12:00 voltage_min_design
-r--r--r-- 1 root root 4096 Jan 25 12:00 voltage_now


ls -l /sys/class/power_supply/ACAD/
Code:
root@ja-Inspiron-7520:~# ls -l /sys/class/power_supply/ACAD/
total 0
lrwxrwxrwx 1 root root    0 Jan 25 16:59 device -> ../../../ACPI0003:00
-r--r--r-- 1 root root 4096 Jan 25 12:00 online
drwxr-xr-x 2 root root    0 Jan 25 16:59 power
lrwxrwxrwx 1 root root    0 Jan 25 11:59 subsystem -> ../../../../../../../../class/power_supply
-r--r--r-- 1 root root 4096 Jan 25 12:00 type
-rw-r--r-- 1 root root 4096 Jan 25 11:59 uevent


/etc/laptop-mode/laptop-mode.conf

Code:
###############################################################################
#
# Configuration for Laptop Mode Tools
# -----------------------------------
#
# There is a "system" to the configuration setting names:
#    CONTROL_something=0/1   Determines whether Laptop Mode Tools controls
#                            something
#    LM_something=value      Value of "something" when laptop mode is active
#    NOLM_something=value    Value of "something" when laptop mode is NOT
#                            active
#    AC_something=value      Value of "something" when the computer is running
#                            on AC power
#    BATT_something=value    Value of "something when the computer is running
#                            on battery power
#
# There can be combinations of LM_/NOLM_ and AC_/BATT_ prefixes, but the
# available prefixes are different for each setting. The available ones are
# documented in the manual page, laptop-mode.conf(8). If there is no LM_/
# NOLM_ in a setting name, then the value is used independently of laptop
# mode state, and similarly, if there is no AC_/BATT_, then the value is used
# independently of power state.
#
# Some options only work on ACPI systems. They are marked ACPI-ONLY.
#
# Note that this configuration file is a fragment of shell script: you
# can use all the features of the shell scripting language to achieve your
# desired configuration.
#
#
# Modules
# -------
#
# Laptop Mode Tools modules have separate configuration files, that can be
# found in /etc/laptop-mode/conf.d. Please look through these configuration
# files as well, there are many useful power saving tools in there!
#
###############################################################################


###############################################################################
# Enable/Disable laptop-mode-tools execution
# ------------------------------------------
# Set it to 0 to completely disable laptop-mode-tools from running
###############################################################################
#
ENABLE_LAPTOP_MODE_TOOLS=1


###############################################################################
# Configuration debugging
# -----------------------
###############################################################################

#
# Set this to 1 if you want to see a lot of information when you start/stop
# laptop_mode.
#
VERBOSE_OUTPUT=0

# Set this to 1 if you want to log messages to syslog
LOG_TO_SYSLOG=1

# Run in shell debug mode
# Enable this if you would like to execute the entire laptop-mode-tools program
# in shell debug mode. Warning: This will create a lot of text output
# If you are debugging an individual module, perhaps you would want to enable
# each module specific debug mode (available in module conf files)
DEBUG=0

###############################################################################
# When to enable laptop mode
# --------------------------
#
# "Laptop mode" is the mode in which laptop mode tools makes the computer
# consume less power. This includes the kernel "laptop_mode" feature, which
# allows your hard drives to spin down, as well as various other settings which
# can be tweaked by laptop mode tools. You can enable or disable all of these
# settings using the CONTROL_... options further down in this config file.
###############################################################################


#
# Enable laptop mode when on battery power.
#
ENABLE_LAPTOP_MODE_ON_BATTERY=1


#
# Enable laptop mode when on AC power.
#
ENABLE_LAPTOP_MODE_ON_AC=1


#
# Enable laptop mode when the laptop's lid is closed, even when we're on AC
# power? (ACPI-ONLY)
#
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=1


#
# Enable all simple zero-configuration auto modules
# This option enables all simple modules (listed below) without requiring
# the user to enable each module individually
#
# List of modules which can be automatically enabled with this setting are:
#
# ac97-powersave
# cpufreq
# dpms-standby
# eee-superhe
# ethernet
# exec-commands
# hal-polling
# hdparm
# intel-hda-powersave
# intel-sata-powermgmt
# nmi-watchdog
# runtime-pm
# sched-mc-power-savings
# sched-smt-power-savings
# terminal-blanking
# usb-autosuspend
# wireless-ipw-power
# wireless-iwl-power
# wireless-power
#
# Set this to 1 to enable all simple zero-configuration auto modules listed above.
#
# NOTE: You can explicitly enable/disable any of the above modules by changing their
# values in the individual settings file
#
ENABLE_AUTO_MODULES=1



###############################################################################
# When to enable data loss sensitive features
# -------------------------------------------
#
# When data loss sensitive features are disabled, laptop mode tools acts as if
# laptop mode were disabled, for those features only.
#
# Data loss sensitive features include:
# - laptop_mode (i.e., delayed writes)
# - hard drive write cache
#
# All of the options that follow can be set to 0 in order to prevent laptop
# mode tools from using them to stop data loss sensitive features. Use this
# when you have a battery that reports the wrong information, that confuses
# laptop mode tools.
#
# Disabling data loss sensitive features is ACPI-ONLY, and it only works if
# your battery gives off frequent ACPI events to indicate a change in battery
# level.
#
# NOTE: If your battery does NOT give off battery events often enough, you can
# enable the battery-level-polling module to make this work. Look at the
# file /etc/laptop-mode/conf.d/battery-level-polling.conf for more information.
#
###############################################################################


#
# Disable all data loss sensitive features when the battery level (in % of the
# battery capacity) reaches this value.
#
MINIMUM_BATTERY_CHARGE_PERCENT=3


#
# Disable data loss sensitive features when the battery reports its state
# as "critical".
#
DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1



###############################################################################
# Controlled hard drives and partitions
# -------------------------------------
#
# For spinning down your hard drives, laptop mode will remount file systems and
# adjust hard drive spindown timeouts. These parameters specify which
# devices and partitions are affected by laptop mode.
###############################################################################


#
# The drives that laptop mode controls.
# Separate them by a space, e.g. HD="/dev/hda /dev/hdb". The default is a
# wildcard, which will get you all your IDE and SCSI/SATA drives.
#
HD="/dev/[hs]d[abcdefgh]"


#
# The partitions (or mount points) that laptop mode controls.
# Separate the values by spaces. Use "auto" to indicate all partitions on drives
# listed in HD. You can add things to "auto", e.g. "auto /dev/hdc3". You can
# also specify mount points, e.g. "/mnt/data".
#
PARTITIONS="auto /dev/mapper/*"


#
# If this is enabled, laptop mode tools will assume that SCSI drives are
# really SATA drives that only _look_ like SCSI drives, and will use hdparm
# to control them. Set this to 0 if you have /dev/sd devices and you want
# laptop mode tools to use the "sdparm" command to control them.
#
ASSUME_SCSI_IS_SATA=1


###############################################################################
# Hard drive behaviour settings
# -----------------------------
#
# These settings specify how laptop mode tools will adjust the various
# parameters of your hard drives and file systems.
###############################################################################


#
# Maximum time, in seconds, of work that you are prepared to lose when your
# system crashes or power runs out. This is the maximum time that Laptop Mode
# will keep unsaved data waiting in memory before spinning up your hard drive.
#
LM_BATT_MAX_LOST_WORK_SECONDS=600
LM_AC_MAX_LOST_WORK_SECONDS=360


#
# Should laptop mode tools control readahead?
#
CONTROL_READAHEAD=1


#
# Read-ahead, in kilobytes. You can spin down the disk while playing MP3/OGG
# by setting the disk readahead to a reasonable size, e.g. 3072 (3 MB).
# Effectively, the disk will read a complete MP3 at once, and will then spin
# down while the MP3/OGG is playing. Don't set this too high, because the
# readahead is applied to _all_ files that are read from disk.
#
LM_READAHEAD=3072
NOLM_READAHEAD=128


#
# Should laptop mode tools add the "noatime" option to the mount options when
# laptop mode is enabled?
#
CONTROL_NOATIME=0

# Should laptop use relatime instead of noatime? The "relatime" mount option has
# more standards-compliant semantics, and allows more applications to work,
# while retaining a low level of atime updates (i.e., disk writes).
USE_RELATIME=1


#
# Should laptop mode tools control the hard drive idle timeout settings?
#
CONTROL_HD_IDLE_TIMEOUT=1


#
# Idle timeout values. (hdparm -S)
# Default is 2 hours on AC (NOLM_HD_IDLE_TIMEOUT_SECONDS=7200) and 20 seconds
# for battery and for AC with laptop mode on.
#
LM_AC_HD_IDLE_TIMEOUT_SECONDS=20
LM_BATT_HD_IDLE_TIMEOUT_SECONDS=20
NOLM_HD_IDLE_TIMEOUT_SECONDS=7200


#
# Should laptop mode tools control the hard drive power management settings?
#
# Set to 0 to disable
CONTROL_HD_POWERMGMT="auto"


#
# Power management for HD (hdparm -B values)
#
BATT_HD_POWERMGMT=1
LM_AC_HD_POWERMGMT=254
NOLM_AC_HD_POWERMGMT=254


#
# Should laptop mode tools control the hard drive write cache settings?
#
CONTROL_HD_WRITECACHE=0


#
# Write cache settings for HD (hdparm -W values)
#
NOLM_AC_HD_WRITECACHE=1
NOLM_BATT_HD_WRITECACHE=0
LM_HD_WRITECACHE=0




###############################################################################
# Settings you probably don't want to touch
# -----------------------------------------
#
# It is usually not necessary to change these parameters. They are included
# for completeness' sake.
###############################################################################


#
# Change mount options on partitions in PARTITIONS? You don't really want to
# disable this. If you do, then your hard drives will probably not spin down
# anymore.
#
CONTROL_MOUNT_OPTIONS=1


#
# Dirty synchronous ratio.  At this percentage of dirty pages the process
# which calls write() does its own writeback.
#
LM_DIRTY_RATIO=60
NOLM_DIRTY_RATIO=40


#
# Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
# exceeded, the kernel will wake pdflush which will then reduce the amount
# of dirty memory to dirty_background_ratio.  Set this nice and low, so once
# some writeout has commenced, we do a lot of it.
#
LM_DIRTY_BACKGROUND_RATIO=1
NOLM_DIRTY_BACKGROUND_RATIO=10


#
# kernel default settings -- don't touch these unless you know what you're
# doing.
#
DEF_UPDATE=5
DEF_XFS_AGE_BUFFER=15
DEF_XFS_SYNC_INTERVAL=30
DEF_XFS_BUFD_INTERVAL=1
DEF_MAX_AGE=30


#
# This must be adjusted manually to the value of HZ in the running kernel
# on 2.4, until the XFS people change their 2.4 external interfaces to work in
# centisecs. This can be automated, but it's a work in progress that still
# needs some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for
# external interfaces, and that is currently always set to 100. So you don't
# need to change this on 2.6.
#
XFS_HZ=100


#
# Seconds laptop mode has to to wait after the disk goes idle before doing
# a sync.
#
LM_SECONDS_BEFORE_SYNC=2
Back to top
View user's profile Send private message
SlashBeast
Retired Dev
Retired Dev


Joined: 23 May 2006
Posts: 2922

PostPosted: Fri Jan 25, 2013 7:06 pm    Post subject: Reply with quote

Nawet nie podales jakiego masz notebooka, ale spoko.

Mozliwosci jest wiele, np. kiedy masz podpiety zasilacz skalowanie procesora jest ustawione na full, inna opcja to ustawienia w biosie, ze gdy jest AC to wiatrak zawsze chodzi. Wiecej nie moge wymyslic bez wiedzy co to za notebook
Back to top
View user's profile Send private message
and1987
n00b
n00b


Joined: 09 Mar 2010
Posts: 39

PostPosted: Fri Jan 25, 2013 7:12 pm    Post subject: Reply with quote

Notebook to: Dell Inspiron 7520
Bios jest bardzo okrojony i nie ma tam nic odnoścnie konfiguracji AC

cpufreq.conf
Code:
#
# Configuration file for Laptop Mode Tools module cpufreq.
#
# For more information, consult the laptop-mode.conf(8) manual page.
#

###############################################################################
# CPU frequency scaling and throttling
# ------------------------------------
#
# Laptop mode tools can automatically adjust your kernel CPU frequency
# settings. This includes upper and lower limits and scaling governors.
# There is also support for CPU throttling, on systems that don't support
# frequency scaling.
#
# This feature only works on 2.6 kernels.
#
#
# IMPORTANT: In versions 1.36 and earlier, these settings were included in the
# main laptop-mode.conf configuration file. If they are still present, they
# overrule the settings in this file. To fix this, simply delete the settings
# from the main config file.
#
###############################################################################

# Enable debug mode for this module
# Set to 1 if you want to debug this module
DEBUG=0

#
# Should laptop mode tools control the CPU frequency settings?
#
# Set to 0 to disable
CONTROL_CPU_FREQUENCY="auto"


#
# Legal values are "slowest" for the slowest speed that your
# CPU is able to operate at, "fastest" for the fastest speed,
# "medium" for some value in the middle, or any value listed in
# /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_frequencies.
# The "governor" can be any governor installed on your system, this usually
# includes "ondemand", "conservative", and "performance". The
# "IGNORE_NICE_LOAD" setting specifies that background programs that have
# a low priority ("nice level") should not cause the CPU frequency to
# be increased. (You generally want this to be enabled in battery mode.)
#
BATT_CPU_MAXFREQ=slowest
BATT_CPU_MINFREQ=slowest
BATT_CPU_GOVERNOR=powersave
BATT_CPU_IGNORE_NICE_LOAD=1
LM_AC_CPU_MAXFREQ=slowest
LM_AC_CPU_MINFREQ=slowest
LM_AC_CPU_GOVERNOR=powersave
LM_AC_CPU_IGNORE_NICE_LOAD=1
NOLM_AC_CPU_MAXFREQ=slowest
NOLM_AC_CPU_MINFREQ=slowest
NOLM_AC_CPU_GOVERNOR=powersave
NOLM_AC_CPU_IGNORE_NICE_LOAD=0


#
# Should laptop mode tools control the CPU throttling? This is only useful
# on processors that don't have frequency scaling.
# (Only works when you have /proc/acpi/processor/CPU*/throttling.)
#
# This is only useful on older P4 processors that do not support frequency
# scaling. On such processors, this is the only way to reduce power consumption
# but at the cost of higher performance penalty.
#
# Enable this only if you have a processor that does not support frequency scaling
# On most new processors, you might want to disable it.
#
# Set to 0 to disable.
CONTROL_CPU_THROTTLING=0


#
# Legal values are "maximum" for the maximum (slowest) throttling level,
# "minimum" for minimum (fastest) throttling level, "medium" for a value
# somewhere in the middle (this is usually 50% for P4s), or any value listed
# in /proc/acpi/processor/CPU*/throttling. Be careful when using "maximum":
# this may be _very_ slow (in fact, with P4s it slows down the processor
# by a factor 8).
#
BATT_CPU_THROTTLING=medium
LM_AC_CPU_THROTTLING=medium
NOLM_AC_CPU_THROTTLING=minimum
Back to top
View user's profile Send private message
SlashBeast
Retired Dev
Retired Dev


Joined: 23 May 2006
Posts: 2922

PostPosted: Fri Jan 25, 2013 10:13 pm    Post subject: Reply with quote

Mozesz uzyc dellfand badz i8kutils, domyslnie sa tylko 3 tryby, off, low i high, mozesz to ustawic przez 'i8kctl fan 0 0' badz 1 1 czy 2 2 (kiedys w dellach byly po 2 wiatraki). i8kutils dostarcza deamona o nazwie i8kmon ale skrypt startowy w gentoo jest jakis niebardzo ale to mozna naprawic.

Po uzyciu i8kctl fan sa dwie mozliwosci, bios odrazu spowrotem 'zawladnie' nad wiatrakami badz nie, i jezeli nie, to od tego momentu sam go nie wylaczy/przelaczy na inne obroty wiec userspace deamon musi sie tym zajac.
Back to top
View user's profile Send private message
and1987
n00b
n00b


Joined: 09 Mar 2010
Posts: 39

PostPosted: Sat Jan 26, 2013 7:38 pm    Post subject: Reply with quote

Tylko problem polega na tym, że nie mam pojęcia jak skonfigurować "laptop mode tools", żeby przy załączonym zasilaczu sieciowym laptop pracował w trybie jak na baterii.
Przypadki użycia:
1. Mam uruchomiony laptop_mode i pracuje na samej baterii jest OK (wyntylator nie pracuje lub bardzo wolno)
2. Mam uruchomiony laptop_mode i pracuje na zasilaczu sieciowym - wentylator "szaleje"
3. Mam wyłączony laptop_mode i pracule na baterii / zasilaczu - wentylator "szaleje"

Wiec podejrzewam, że problem tkwi w ustawieniach laptop mode tools. Tylko z tego nie wiem gdzie można to poprawić bo "ENABLE_LAPTOP_MODE_ON_AC=1" mam ustawione.

Mam jeszcze pytanie odnośnie "i8kctl fan 0 0" czy jak to jest niebezpieczne dla procesora gdy będzie obciążony, czy może jakiś układ na płycie głównej wykryje zwiekszoną temperature i przejmie kontrole ?
Back to top
View user's profile Send private message
sebas86
Guru
Guru


Joined: 01 May 2005
Posts: 568
Location: Szczecinek / Szczecin

PostPosted: Sat Feb 02, 2013 2:43 pm    Post subject: Reply with quote

U mnie na dellu z podobnymi bebechami (mamy ten sam chipset) było podobnie do czasu zrezygnowania z i8k, w dodatku moduł powodował przycięcia na kilkadziesiąt-kilkaset milisekund przy pełnym obciążeniu (widoczne zwłaszcza w grach, wystarczy odpalić np. TORCS). Po wywaleniu modułu nadal wentylatory załączają się za często jak na mój gust, ale przynajmniej po ostudzeniu spada prędkość do akceptowalnej wartości, z i8k nawet po schodzeniu do normalnych wartości szalał na pełnych prędkościach.
_________________
Nieważne jaka dystrybucja, ważne, że Linux!
Back to top
View user's profile Send private message
SlashBeast
Retired Dev
Retired Dev


Joined: 23 May 2006
Posts: 2922

PostPosted: Sat Feb 02, 2013 7:45 pm    Post subject: Reply with quote

No jezeli choc raz uzyles go do zmiany ustawien wiatraka to do restartu bios nie przejmowal ich spowrotem, chyba, ze wymuszal to ale i to sie da wylaczyc (smm.c z i8kutils odpalony z argumentem 30a3, 31a3 by spowrotem bios/uefi kontrolowalo wiatraki).
Back to top
View user's profile Send private message
and1987
n00b
n00b


Joined: 09 Mar 2010
Posts: 39

PostPosted: Sat Feb 09, 2013 4:31 pm    Post subject: [SOLVED] Wentylator pracujący cały czas na pełnych obrotach Reply with quote

Problem wynikał z tego, że domyślnie włączona była GPU (radeon hd 7520M) i po wyłączeniu:
Code:
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
Wentylator się uspokoił.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum