View previous topic :: View next topic |
Author |
Message |
deutronium n00b
Joined: 15 Jan 2008 Posts: 16
|
Posted: Sun Jan 27, 2013 5:24 pm Post subject: Upgraded gentoo and now X won't start [SOLVED] |
|
|
I have a hybrid AMD & Intel laptop.
I'm now getting the following messages from Xorg.0.log
cheers
Chris
Code: |
[ 156.405]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 156.407] X Protocol Version 11, Revision 0
[ 156.408] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
[ 156.409] Current Operating System: Linux icarus 3.6.11-gentoo #1 SMP Sun Jan 27 16:58:27 GMT 2013 x86_64
[ 156.409] Kernel command line: root=/dev/sda3 vga=6 iwlwifi.wd_disable=1 intel_iommu=on
[ 156.411] Build Date: 22 January 2013 01:23:05AM
[ 156.412]
[ 156.413] Current version of pixman: 0.28.0
[ 156.414] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 156.414] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 156.418] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 27 17:03:49 2013
[ 156.419] (==) Using config file: "/etc/X11/xorg.conf"
[ 156.420] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 156.420] (==) ServerLayout "aticonfig Layout"
[ 156.420] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 156.420] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 156.420] (**) | |-->Device "aticonfig-Device[0]-0"
[ 156.420] (==) Automatically adding devices
[ 156.421] (==) Automatically enabling devices
[ 156.421] (==) Automatically adding GPU devices
[ 156.421] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 156.421] Entry deleted from font path.
[ 156.421] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 156.421] Entry deleted from font path.
[ 156.421] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 156.421] Entry deleted from font path.
[ 156.421] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 156.421] Entry deleted from font path.
[ 156.421] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 156.421] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 156.421] Entry deleted from font path.
[ 156.421] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 156.421] (==) FontPath set to:
/usr/share/fonts/misc/
[ 156.421] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 156.421] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 156.421] (II) Loader magic: 0x80ec00
[ 156.421] (II) Module ABI versions:
[ 156.421] X.Org ANSI C Emulation: 0.4
[ 156.421] X.Org Video Driver: 13.1
[ 156.421] X.Org XInput driver : 18.0
[ 156.421] X.Org Server Extension : 7.0
[ 156.421] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 156.422] (--) PCI:*(0:0:2:0) 8086:0166:1028:0572 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[ 156.422] (--) PCI: (0:1:0:0) 1002:682f:1028:0572 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 156.422] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 156.423] Initializing built-in extension Generic Event Extension
[ 156.424] Initializing built-in extension SHAPE
[ 156.425] Initializing built-in extension MIT-SHM
[ 156.426] Initializing built-in extension XInputExtension
[ 156.427] Initializing built-in extension XTEST
[ 156.428] Initializing built-in extension BIG-REQUESTS
[ 156.429] Initializing built-in extension SYNC
[ 156.430] Initializing built-in extension XKEYBOARD
[ 156.431] Initializing built-in extension XC-MISC
[ 156.432] Initializing built-in extension XINERAMA
[ 156.433] Initializing built-in extension XFIXES
[ 156.434] Initializing built-in extension RENDER
[ 156.435] Initializing built-in extension RANDR
[ 156.436] Initializing built-in extension COMPOSITE
[ 156.437] Initializing built-in extension DAMAGE
[ 156.438] Initializing built-in extension MIT-SCREEN-SAVER
[ 156.439] Initializing built-in extension DOUBLE-BUFFER
[ 156.440] Initializing built-in extension RECORD
[ 156.441] Initializing built-in extension DPMS
[ 156.442] Initializing built-in extension X-Resource
[ 156.443] Initializing built-in extension XVideo
[ 156.444] Initializing built-in extension XVideo-MotionCompensation
[ 156.445] Initializing built-in extension XFree86-VidModeExtension
[ 156.446] Initializing built-in extension XFree86-DGA
[ 156.447] Initializing built-in extension XFree86-DRI
[ 156.448] Initializing built-in extension DRI2
[ 156.448] (II) "glx" will be loaded by default.
[ 156.448] (II) LoadModule: "glx"
[ 156.448] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 156.449] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 156.449] compiled for 6.9.0, module version = 1.0.0
[ 156.450] Loading extension GLX
[ 156.450] (II) LoadModule: "fglrx"
[ 156.450] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 156.461] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 156.461] compiled for 1.4.99.906, module version = 9.1.11
[ 156.461] Module class: X.Org Video Driver
[ 156.462] (II) Loading sub module "fglrxdrm"
[ 156.462] (II) LoadModule: "fglrxdrm"
[ 156.462] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 156.462] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 156.462] compiled for 1.4.99.906, module version = 9.1.11
[ 156.462] (II) AMD Proprietary Linux Driver Version Identifier:9.01.11
[ 156.462] (II) AMD Proprietary Linux Driver Release Identifier: 9.012
[ 156.462] (II) AMD Proprietary Linux Driver Build Date: Dec 19 2012 14:41:10
[ 156.462] (--) using VT number 7
[ 156.467] (WW) Falling back to old probe method for fglrx
[ 156.472] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 156.474] ukiDynamicMajor: found major device number 250
[ 156.474] ukiDynamicMajor: found major device number 250
[ 156.474] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 156.474] ukiOpenDevice: node name is /dev/ati/card0
[ 156.474] ukiOpenDevice: open result is 9, (OK)
[ 156.474] ukiOpenByBusid: ukiOpenMinor returns 9
[ 156.474] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 156.535] (--) Chipset Supported AMD Graphics Processor (0x682F) found
[ 156.535] (II) fglrx: intel VGA device detected, load intel driver.
[ 156.535] (II) LoadModule: "intel"
[ 156.535] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 156.535] (II) Module intel: vendor="X.Org Foundation"
[ 156.535] compiled for 1.13.1, module version = 2.20.13
[ 156.535] Module class: X.Org Video Driver
[ 156.535] ABI class: X.Org Video Driver, version 13.1
[ 156.535] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 156.535] (II) AMD Video driver is signed
[ 156.536] (II) fglrx(0): pEnt->device->identifier=0x1adc670
[ 156.536] (II) intel(1): pEnt->device->identifier=(nil)
[ 156.536] (EE) Screen 1 deleted because of no matching config section.
[ 156.536] (II) UnloadModule: "intel"
[ 156.536] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 156.536] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[ 156.564] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 156.564] (==) fglrx(0): RGB weight 888
[ 156.564] (==) fglrx(0): Default visual is TrueColor
[ 156.564] (**) fglrx(0): Option "Tiling" "off"
[ 156.564] (**) fglrx(0): Option "LinearFramebuffer" "on"
[ 156.564] (**) fglrx(0): ChipID override: 0x0166
[ 156.564] (**) fglrx(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 156.564] (**) fglrx(0): Framebuffer linear
[ 156.564] (**) fglrx(0): Pixmaps linear
[ 156.564] (**) fglrx(0): 3D buffers tiled
[ 156.564] (**) fglrx(0): Throttling enabled
[ 156.564] (**) fglrx(0): Delayed flush enabled
[ 156.564] (**) fglrx(0): "Tear free" disabled
[ 156.564] (**) fglrx(0): Forcing per-crtc-pixmaps? no
[ 156.564] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0
[ 156.565] (--) fglrx(0): found backlight control interface acpi_video0 (type 'firmware')
[ 156.571] (II) fglrx(0): Output VGA1 has no monitor section
[ 156.572] (II) fglrx(0): Output HDMI1 has no monitor section
[ 156.597] (II) fglrx(0): Output DP1 has no monitor section
[ 156.597] (II) fglrx(0): EDID for output LVDS1
[ 156.597] (II) fglrx(0): Manufacturer: AUO Model: 21ed Serial#: 0
[ 156.597] (II) fglrx(0): Year: 2011 Week: 4
[ 156.597] (II) fglrx(0): EDID Version: 1.4
[ 156.597] (II) fglrx(0): Digital Display Input
[ 156.597] (II) fglrx(0): 6 bits per channel
[ 156.597] (II) fglrx(0): Digital interface is undefined
[ 156.597] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 156.597] (II) fglrx(0): Gamma: 2.20
[ 156.597] (II) fglrx(0): No DPMS capabilities specified
[ 156.597] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 156.597] (II) fglrx(0): First detailed timing is preferred mode
[ 156.597] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 156.597] (II) fglrx(0): redX: 0.620 redY: 0.350 greenX: 0.320 greenY: 0.600
[ 156.597] (II) fglrx(0): blueX: 0.150 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 156.597] (II) fglrx(0): Manufacturer's mask: 0
[ 156.597] (II) fglrx(0): Supported detailed timing:
[ 156.597] (II) fglrx(0): clock: 148.0 MHz Image Size: 344 x 194 mm
[ 156.597] (II) fglrx(0): h_active: 1920 h_sync: 2020 h_sync_end 2040 h_blank_end 2186 h_border: 0
[ 156.597] (II) fglrx(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1128 v_border: 0
[ 156.597] (II) fglrx(0): Supported detailed timing:
[ 156.597] (II) fglrx(0): clock: 98.7 MHz Image Size: 344 x 194 mm
[ 156.597] (II) fglrx(0): h_active: 1920 h_sync: 2020 h_sync_end 2040 h_blank_end 2186 h_border: 0
[ 156.597] (II) fglrx(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1128 v_border: 0
[ 156.597] (II) fglrx(0): 35K06B156HW2
[ 156.597] (II) fglrx(0): Unknown vendor-specific block 0
[ 156.597] (II) fglrx(0): EDID (in hex):
[ 156.597] (II) fglrx(0): 00ffffffffffff0006afed2100000000
[ 156.597] (II) fglrx(0): 041501049022137802e2b59e59529926
[ 156.597] (II) fglrx(0): 1e505400000001010101010101010101
[ 156.597] (II) fglrx(0): 010101010101d039800a713830406414
[ 156.597] (II) fglrx(0): aa0058c21000001a8b26800a71383040
[ 156.597] (II) fglrx(0): 6414aa0058c21000001a000000fe0033
[ 156.597] (II) fglrx(0): 354b3036804231353648573200000000
[ 156.597] (II) fglrx(0): 000041219e0000000002010a20200016
[ 156.597] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 156.597] (II) fglrx(0): Printing probed modes for output LVDS1
[ 156.597] (II) fglrx(0): Modeline "1920x1080"x60.0 148.00 1920 2020 2040 2186 1080 1090 1100 1128 +hsync -vsync (67.7 kHz eP)
[ 156.597] (II) fglrx(0): Modeline "1920x1080"x40.0 98.67 1920 2020 2040 2186 1080 1090 1100 1128 +hsync -vsync (45.1 kHz e)
[ 156.597] (II) fglrx(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 156.597] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 156.597] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 156.597] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 156.597] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 156.597] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 156.597] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 156.601] (II) fglrx(0): EDID for output VGA1
[ 156.602] (II) fglrx(0): EDID for output HDMI1
[ 156.626] (II) fglrx(0): EDID for output DP1
[ 156.626] (II) fglrx(0): Output LVDS1 connected
[ 156.626] (II) fglrx(0): Output VGA1 disconnected
[ 156.626] (II) fglrx(0): Output HDMI1 disconnected
[ 156.626] (II) fglrx(0): Output DP1 disconnected
[ 156.626] (II) fglrx(0): Using exact sizes for initial modes
[ 156.626] (II) fglrx(0): Output LVDS1 using initial mode 1920x1080
[ 156.626] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 156.626] (==) fglrx(0): DPI set to (96, 96)
[ 156.626] (II) Loading sub module "dri2"
[ 156.626] (II) LoadModule: "dri2"
[ 156.626] (II) Module "dri2" already built-in
[ 156.626] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 156.626] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 156.626] (==) fglrx(0): Default visual is TrueColor
[ 156.626] (**) fglrx(0): Option "DPMS" "true"
[ 156.626] (==) fglrx(0): RGB weight 888
[ 156.626] (II) fglrx(0): Using 8 bits per RGB
[ 156.626] (==) fglrx(0): Buffer Tiling is ON
[ 156.626] (II) Loading sub module "fglrxdrm"
[ 156.626] (II) LoadModule: "fglrxdrm"
[ 156.626] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 156.626] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 156.626] compiled for 1.4.99.906, module version = 9.1.11
[ 156.627] ukiDynamicMajor: found major device number 250
[ 156.627] ukiDynamicMajor: found major device number 250
[ 156.627] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 156.627] ukiOpenDevice: node name is /dev/ati/card0
[ 156.627] ukiOpenDevice: open result is 14, (OK)
[ 156.627] ukiOpenByBusid: ukiOpenMinor returns 14
[ 156.627] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 156.628] (**) fglrx(0): NoAccel = NO
[ 156.628] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 156.628] (--) fglrx(0): Chipset: "AMD Radeon HD 7700M Series " (Chipset = 0x682f)
[ 156.628] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x0572)
[ 156.628] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 156.628] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[ 156.628] (--) fglrx(0): MMIO registers at 0xc0000000
[ 156.628] (--) fglrx(0): I/O port at 0x00003000
[ 156.628] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 156.628] (II) fglrx(0): AC Adapter is used
[ 156.628] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 156.628] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3
[ 156.628] (II) fglrx(0): PCIE card detected
[ 156.628] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 156.628] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 156.636] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 156.636] (II) fglrx(0): RandR 1.2 support is enabled!
[ 156.636] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 156.636] (==) fglrx(0): Center Mode is disabled
[ 156.636] (II) Loading sub module "fb"
[ 156.636] (II) LoadModule: "fb"
[ 156.636] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 156.636] (II) Module fb: vendor="X.Org Foundation"
[ 156.636] compiled for 1.13.1, module version = 1.0.0
[ 156.636] ABI class: X.Org ANSI C Emulation, version 0.4
[ 156.636] (II) Loading sub module "ddc"
[ 156.636] (II) LoadModule: "ddc"
[ 156.637] (II) Module "ddc" already built-in
[ 156.644] (II) fglrx(0): Eyefinity capable adapter detected.
[ 156.644] (II) fglrx(0): Adapter AMD Radeon HD 7700M Series has 6 configurable heads and 0 displays connected.
[ 156.644] (==) fglrx(0): PseudoColor visuals disabled
[ 156.644] (II) Loading sub module "ramdac"
[ 156.644] (II) LoadModule: "ramdac"
[ 156.644] (II) Module "ramdac" already built-in
[ 156.644] (==) fglrx(0): NoDRI = NO
[ 156.644] (==) fglrx(0): Capabilities: 0x00000000
[ 156.644] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 156.644] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 156.644] (==) fglrx(0): UseFastTLS=0
[ 156.644] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[ 156.644] (--) Depth 24 pixmap format is 32 bpp
[ 156.644] (II) LoadModule: "glesx"
[ 156.644] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 156.644] (II) Module glesx: vendor="X.Org Foundation"
[ 156.644] compiled for 1.4.99.906, module version = 1.0.0
[ 156.644] Loading extension GLESX
[ 156.645] (II) fglrx(0): SNA initialized with IvyBridge backend
[ 156.645] (==) fglrx(0): Backing store disabled
[ 156.645] (==) fglrx(0): Silken mouse enabled
[ 156.645] (II) fglrx(0): HW Cursor enabled
[ 156.645] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 156.645] (**) fglrx(0): DPMS enabled
[ 156.645] (II) fglrx(0): [DRI2] Setup complete
[ 156.645] (II) fglrx(0): [DRI2] DRI driver: i965
[ 156.645] (II) fglrx(0): direct rendering: DRI2 Enabled
[ 156.645] (WW) fglrx(0): Option "VendorName" is not used
[ 156.645] (WW) fglrx(0): Option "ModelName" is not used
[ 156.645] (WW) fglrx(0): Option "Shadow" is not used
[ 156.645] (WW) fglrx(0): Option "Tiling" is not used
[ 156.645] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 156.645] (==) fglrx(0): hotplug detection: "enabled"
[ 156.645] Loading extension ATIFGLRXDRI
[ 156.645] (II) fglrx(0): doing swlDriScreenInit
[ 156.645] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 156.645] ukiDynamicMajor: found major device number 250
[ 156.645] ukiDynamicMajor: found major device number 250
[ 156.645] ukiDynamicMajor: found major device number 250
[ 156.645] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 156.645] ukiOpenDevice: node name is /dev/ati/card0
[ 156.645] ukiOpenDevice: open result is 16, (OK)
[ 156.645] ukiOpenByBusid: ukiOpenMinor returns 16
[ 156.645] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 156.645] (II) fglrx(0): [uki] DRM interface version 1.0
[ 156.646] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 156.646] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2c000
[ 156.646] (II) fglrx(0): [uki] mapped SAREA 0x2c000 to 0x7f1ea0c0f000
[ 156.646] (II) fglrx(0): [uki] framebuffer handle = 0x2d000
[ 156.646] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 156.646] (II) fglrx(0): swlDriScreenInit done
[ 156.646] (II) fglrx(0): Kernel Module Version Information:
[ 156.646] (II) fglrx(0): Name: fglrx
[ 156.646] (II) fglrx(0): Version: 9.1.11
[ 156.646] (II) fglrx(0): Date: Dec 19 2012
[ 156.646] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 156.646] (II) fglrx(0): Kernel Module version matches driver.
[ 156.646] (II) fglrx(0): Kernel Module Build Time Information:
[ 156.646] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.6.11-gentoo
[ 156.646] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 156.646] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 156.646] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 156.646] (II) fglrx(0): [uki] register handle = 0x0002e000
[ 156.646] (II) fglrx(0): DRI initialization successfull
[ 156.646] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 156.647] (II) fglrx(0): Intel display surface mc addr for AMD: ffef12e000
[ 156.647] (==) fglrx(0): Backing store disabled
[ 156.647] Loading extension FGLRXEXTENSION
[ 156.647] (**) fglrx(0): DPMS enabled
[ 156.647] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 156.647] (**) fglrx(0): Textured Video is enabled.
[ 156.647] (II) fglrx(0): GLESX enableFlags = 848
[ 156.647] (II) fglrx(0): GLESX is enabled
[ 156.648] (II) LoadModule: "amdxmm"
[ 156.648] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 156.648] (II) Module amdxmm: vendor="X.Org Foundation"
[ 156.648] compiled for 1.4.99.906, module version = 2.0.0
[ 156.648] Loading extension AMDXVOPL
[ 156.648] Loading extension AMDXVBA
[ 156.648] XvScreenInit: screen devPrivates ptr non-NULL before init
[ 156.649] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 156.650] (II) fglrx(0): Enable composite support successfully
[ 156.650] (WW) fglrx(0): Option "VendorName" is not used
[ 156.650] (WW) fglrx(0): Option "ModelName" is not used
[ 156.650] (WW) fglrx(0): Option "Shadow" is not used
[ 156.650] (WW) fglrx(0): Option "Tiling" is not used
[ 156.650] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 156.650] (II) fglrx(0): X context handle = 0x3
[ 156.650] (II) fglrx(0): [DRI] installation complete
[ 156.678] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf40b6e0000 width=0xa00 height=0x1900
[ 156.678] (--) RandR disabled
[ 156.683] ukiDynamicMajor: found major device number 250
[ 156.683] ukiDynamicMajor: found major device number 250
[ 156.683] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 156.683] ukiOpenDevice: node name is /dev/ati/card0
[ 156.684] ukiOpenDevice: open result is 17, (OK)
[ 156.684] ukiOpenByBusid: ukiOpenMinor returns 17
[ 156.684] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 156.755] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 156.765] (EE) fglrx(0): Failed to allocate caches, disabling RENDER acceleration
[ 156.772] (EE) fglrx(0): [intel] Failed to allocate video resources for front buffer 1920x1080 at depth 24
[ 156.772]
Fatal server error:
[ 156.772] failed to create screen resources
[ 156.772] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 156.772] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 156.772] (EE)
[ 156.772] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 156.772] (II) fglrx(0): Backup framebuffer data.
[ 156.782] (II) fglrx(0): Backup complete.
[ 156.794] Server terminated with error (1). Closing log file.
|
lspci:
Code: |
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cape Verde [Radeon HD 7700M Series]
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 07)
08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
|
lsmod:
Code: |
Module Size Used by
i915 482918 2
drm_kms_helper 24870 1 i915
fglrx 5084705 0
kvm_intel 121548 0
kvm 354921 1 kvm_intel
|
Last edited by deutronium on Tue Jan 29, 2013 8:02 pm; edited 1 time in total |
|
Back to top |
|
|
FRIGN n00b
Joined: 12 Jan 2013 Posts: 23 Location: Germany
|
Posted: Sun Jan 27, 2013 6:09 pm Post subject: |
|
|
Have you tried temporarily moving the Xorg.conf?
Code: | mv /etc/X11/xorg.conf /etc/X11/xorg.conf.lock |
Optionally, you may run
afterwards to help Xorg detect the multicard-setup.
Maybe that solves the problem.
The output given here
Code: | [ 156.772] (EE) fglrx(0): [intel] Failed to allocate video resources for front buffer 1920x1080 at depth 24 |
suggests, that the Intel-SNA-driver did not find a screen to write to (see /src/sna/sna_driver.c, line 200). |
|
Back to top |
|
|
deutronium n00b
Joined: 15 Jan 2008 Posts: 16
|
Posted: Sun Jan 27, 2013 6:19 pm Post subject: |
|
|
Yes, if i remove the X config, then X starts using the Intel chipset.
But I need to use the AMD one for hardware acceleration etc. |
|
Back to top |
|
|
FRIGN n00b
Joined: 12 Jan 2013 Posts: 23 Location: Germany
|
Posted: Sun Jan 27, 2013 6:41 pm Post subject: |
|
|
deutronium wrote: | Yes, if i remove the X config, then X starts using the Intel chipset.
But I need to use the AMD one for hardware acceleration etc. |
Ok, then please post the output of your Xorg.conf. It seems as if the Screen-Section is wrong.
Did you try Xorg -configure? |
|
Back to top |
|
|
deutronium n00b
Joined: 15 Jan 2008 Posts: 16
|
Posted: Sun Jan 27, 2013 6:47 pm Post subject: |
|
|
I tried Xorg -configure but it just generated an intel config file, so it used the Intel chipset:
The aticonfig generated one, that causes X not to start is:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection |
|
Back to top |
|
|
FRIGN n00b
Joined: 12 Jan 2013 Posts: 23 Location: Germany
|
Posted: Sun Jan 27, 2013 6:59 pm Post subject: |
|
|
deutronium wrote: | I tried Xorg -configure but it just generated an intel config file, so it used the Intel chipset:
The aticonfig generated one, that causes X not to start is:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection |
Thanks for the input!
I think the problem is here:
Code: | [ 156.755] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 156.765] (EE) fglrx(0): Failed to allocate caches, disabling RENDER acceleration
[ 156.772] (EE) fglrx(0): [intel] Failed to allocate video resources for front buffer 1920x1080 at depth 24 |
I am not into AMD/Catalyst at all, but from what I know, AIGLX and fglrx are incompatible, thus biting each other.
Try adding
Code: | Section "ServerFlags"
Option "AIGLX" "false"
EndSection |
to your Xorg.conf. It is a wild guess from my side, but it might work!
EDIT: On the basis of the bottom feedback, it might really be a better idea to stick to free drivers.
Alternatively, a re-emerge of the ati-catalyst-driver might fix the problem.
Last edited by FRIGN on Sun Jan 27, 2013 7:06 pm; edited 2 times in total |
|
Back to top |
|
|
ulenrich Veteran
Joined: 10 Oct 2010 Posts: 1480
|
Posted: Sun Jan 27, 2013 7:03 pm Post subject: |
|
|
Having a dual hybrid I would stick to opensource drivers at first, to learn from it in a working way. Otherwise some kms and randr incapabilities of closed source drivers will hinder you |
|
Back to top |
|
|
666threesixes666 Veteran
Joined: 31 May 2011 Posts: 1248 Location: 42.68n 85.41w
|
Posted: Sun Jan 27, 2013 7:03 pm Post subject: |
|
|
my systems nvidia, be warned my advice is just a guess... i get these problems when i need to re-emerge nvidia-drivers.... you might need to do something similar, as in emerge or re emerge your ati or fglrx or what ever drivers.
give
emerge ati-drivers
a whirl
Last edited by 666threesixes666 on Sun Jan 27, 2013 7:07 pm; edited 1 time in total |
|
Back to top |
|
|
deutronium n00b
Joined: 15 Jan 2008 Posts: 16
|
Posted: Sun Jan 27, 2013 7:07 pm Post subject: |
|
|
I'm actually installing the AMD driver from AMD's own package. Using the latest version 13.1. Open source drivers aren't really
an option for me unfortunately. |
|
Back to top |
|
|
FRIGN n00b
Joined: 12 Jan 2013 Posts: 23 Location: Germany
|
Posted: Sun Jan 27, 2013 7:08 pm Post subject: |
|
|
deutronium wrote: | I'm actually installing the AMD driver from AMD's own package. Using the latest version 13.1. Open source drivers aren't really
an option for me unfortunately. |
OK, fine. Did you try the AIGLX-option? |
|
Back to top |
|
|
666threesixes666 Veteran
Joined: 31 May 2011 Posts: 1248 Location: 42.68n 85.41w
|
Posted: Sun Jan 27, 2013 7:09 pm Post subject: |
|
|
its a graphics error, not a processor or chipset error... where did you find your laptop? can i have model numbers brand, so on... just REALLY curious as ive never been exposed to such a machine |
|
Back to top |
|
|
deutronium n00b
Joined: 15 Jan 2008 Posts: 16
|
Posted: Sun Jan 27, 2013 7:39 pm Post subject: |
|
|
Still get a similar error unfortunately.
The laptop is a Dell 15R i7.
[ 9138.790]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 9138.792] X Protocol Version 11, Revision 0
[ 9138.793] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
[ 9138.794] Current Operating System: Linux icarus 3.6.11-gentoo #1 SMP Sun Jan 27 16:58:27 GMT 2013 x86_64
[ 9138.794] Kernel command line: root=/dev/sda3 vga=6 iwlwifi.wd_disable=1 intel_iommu=on
[ 9138.796] Build Date: 22 January 2013 01:23:05AM
[ 9138.796]
[ 9138.797] Current version of pixman: 0.28.0
[ 9138.799] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9138.799] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9138.802] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 27 19:33:31 2013
[ 9138.803] (==) Using config file: "/etc/X11/xorg.conf"
[ 9138.804] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9138.804] (==) ServerLayout "aticonfig Layout"
[ 9138.804] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 9138.804] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 9138.804] (**) | |-->Device "aticonfig-Device[0]-0"
[ 9138.804] (**) Option "AIGLX" "on"
[ 9138.804] (==) Automatically adding devices
[ 9138.804] (==) Automatically enabling devices
[ 9138.804] (==) Automatically adding GPU devices
[ 9138.804] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 9138.804] Entry deleted from font path.
[ 9138.804] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 9138.804] Entry deleted from font path.
[ 9138.804] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 9138.804] Entry deleted from font path.
[ 9138.804] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 9138.804] Entry deleted from font path.
[ 9138.804] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 9138.804] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 9138.804] Entry deleted from font path.
[ 9138.804] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 9138.804] (==) FontPath set to:
/usr/share/fonts/misc/
[ 9138.804] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 9138.804] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9138.804] (II) Loader magic: 0x80ec00
[ 9138.804] (II) Module ABI versions:
[ 9138.804] X.Org ANSI C Emulation: 0.4
[ 9138.804] X.Org Video Driver: 13.1
[ 9138.804] X.Org XInput driver : 18.0
[ 9138.804] X.Org Server Extension : 7.0
[ 9138.805] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 9138.806] (--) PCI:*(0:0:2:0) 8086:0166:1028:0572 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[ 9138.806] (--) PCI: (0:1:0:0) 1002:682f:1028:0572 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 9138.806] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 9138.807] Initializing built-in extension Generic Event Extension
[ 9138.808] Initializing built-in extension SHAPE
[ 9138.809] Initializing built-in extension MIT-SHM
[ 9138.809] Initializing built-in extension XInputExtension
[ 9138.810] Initializing built-in extension XTEST
[ 9138.811] Initializing built-in extension BIG-REQUESTS
[ 9138.812] Initializing built-in extension SYNC
[ 9138.813] Initializing built-in extension XKEYBOARD
[ 9138.814] Initializing built-in extension XC-MISC
[ 9138.814] Initializing built-in extension XINERAMA
[ 9138.815] Initializing built-in extension XFIXES
[ 9138.816] Initializing built-in extension RENDER
[ 9138.817] Initializing built-in extension RANDR
[ 9138.818] Initializing built-in extension COMPOSITE
[ 9138.818] Initializing built-in extension DAMAGE
[ 9138.819] Initializing built-in extension MIT-SCREEN-SAVER
[ 9138.820] Initializing built-in extension DOUBLE-BUFFER
[ 9138.820] Initializing built-in extension RECORD
[ 9138.821] Initializing built-in extension DPMS
[ 9138.822] Initializing built-in extension X-Resource
[ 9138.823] Initializing built-in extension XVideo
[ 9138.823] Initializing built-in extension XVideo-MotionCompensation
[ 9138.824] Initializing built-in extension XFree86-VidModeExtension
[ 9138.825] Initializing built-in extension XFree86-DGA
[ 9138.826] Initializing built-in extension XFree86-DRI
[ 9138.826] Initializing built-in extension DRI2
[ 9138.826] (II) "glx" will be loaded by default.
[ 9138.826] (II) LoadModule: "glx"
[ 9138.827] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 9138.827] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 9138.827] compiled for 6.9.0, module version = 1.0.0
[ 9138.828] Loading extension GLX
[ 9138.828] (II) LoadModule: "fglrx"
[ 9138.828] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 9138.840] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 9138.840] compiled for 1.4.99.906, module version = 9.1.11
[ 9138.840] Module class: X.Org Video Driver
[ 9138.840] (II) Loading sub module "fglrxdrm"
[ 9138.840] (II) LoadModule: "fglrxdrm"
[ 9138.840] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 9138.840] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 9138.840] compiled for 1.4.99.906, module version = 9.1.11
[ 9138.840] (II) AMD Proprietary Linux Driver Version Identifier:9.01.11
[ 9138.840] (II) AMD Proprietary Linux Driver Release Identifier: 9.012
[ 9138.840] (II) AMD Proprietary Linux Driver Build Date: Dec 19 2012 14:41:10
[ 9138.840] (--) using VT number 7
[ 9138.845] (WW) Falling back to old probe method for fglrx
[ 9138.850] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 9138.852] ukiDynamicMajor: found major device number 250
[ 9138.852] ukiDynamicMajor: found major device number 250
[ 9138.852] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9138.852] ukiOpenDevice: node name is /dev/ati/card0
[ 9138.852] ukiOpenDevice: open result is 9, (OK)
[ 9138.852] ukiOpenByBusid: ukiOpenMinor returns 9
[ 9138.852] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9138.913] (--) Chipset Supported AMD Graphics Processor (0x682F) found
[ 9138.913] (II) fglrx: intel VGA device detected, load intel driver.
[ 9138.913] (II) LoadModule: "intel"
[ 9138.913] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 9138.913] (II) Module intel: vendor="X.Org Foundation"
[ 9138.913] compiled for 1.13.1, module version = 2.20.13
[ 9138.913] Module class: X.Org Video Driver
[ 9138.913] ABI class: X.Org Video Driver, version 13.1
[ 9138.913] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 9138.913] (II) AMD Video driver is signed
[ 9138.914] (II) fglrx(0): pEnt->device->identifier=0xb77670
[ 9138.914] (II) intel(1): pEnt->device->identifier=(nil)
[ 9138.914] (EE) Screen 1 deleted because of no matching config section.
[ 9138.914] (II) UnloadModule: "intel"
[ 9138.914] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 9138.914] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[ 9138.942] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 9138.942] (==) fglrx(0): RGB weight 888
[ 9138.942] (==) fglrx(0): Default visual is TrueColor
[ 9138.942] (**) fglrx(0): Option "Tiling" "off"
[ 9138.942] (**) fglrx(0): Option "LinearFramebuffer" "on"
[ 9138.942] (**) fglrx(0): ChipID override: 0x0166
[ 9138.942] (**) fglrx(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 9138.942] (**) fglrx(0): Framebuffer linear
[ 9138.942] (**) fglrx(0): Pixmaps linear
[ 9138.942] (**) fglrx(0): 3D buffers tiled
[ 9138.942] (**) fglrx(0): Throttling enabled
[ 9138.942] (**) fglrx(0): Delayed flush enabled
[ 9138.942] (**) fglrx(0): "Tear free" disabled
[ 9138.942] (**) fglrx(0): Forcing per-crtc-pixmaps? no
[ 9138.943] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0
[ 9138.943] (--) fglrx(0): found backlight control interface acpi_video0 (type 'firmware')
[ 9138.947] (II) fglrx(0): Output VGA1 has no monitor section
[ 9138.948] (II) fglrx(0): Output HDMI1 has no monitor section
[ 9138.972] (II) fglrx(0): Output DP1 has no monitor section
[ 9138.972] (II) fglrx(0): EDID for output LVDS1
[ 9138.972] (II) fglrx(0): Manufacturer: AUO Model: 21ed Serial#: 0
[ 9138.972] (II) fglrx(0): Year: 2011 Week: 4
[ 9138.972] (II) fglrx(0): EDID Version: 1.4
[ 9138.972] (II) fglrx(0): Digital Display Input
[ 9138.972] (II) fglrx(0): 6 bits per channel
[ 9138.972] (II) fglrx(0): Digital interface is undefined
[ 9138.972] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 9138.972] (II) fglrx(0): Gamma: 2.20
[ 9138.972] (II) fglrx(0): No DPMS capabilities specified
[ 9138.972] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 9138.972] (II) fglrx(0): First detailed timing is preferred mode
[ 9138.972] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 9138.972] (II) fglrx(0): redX: 0.620 redY: 0.350 greenX: 0.320 greenY: 0.600
[ 9138.972] (II) fglrx(0): blueX: 0.150 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 9138.972] (II) fglrx(0): Manufacturer's mask: 0
[ 9138.972] (II) fglrx(0): Supported detailed timing:
[ 9138.972] (II) fglrx(0): clock: 148.0 MHz Image Size: 344 x 194 mm
[ 9138.972] (II) fglrx(0): h_active: 1920 h_sync: 2020 h_sync_end 2040 h_blank_end 2186 h_border: 0
[ 9138.972] (II) fglrx(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1128 v_border: 0
[ 9138.972] (II) fglrx(0): Supported detailed timing:
[ 9138.972] (II) fglrx(0): clock: 98.7 MHz Image Size: 344 x 194 mm
[ 9138.972] (II) fglrx(0): h_active: 1920 h_sync: 2020 h_sync_end 2040 h_blank_end 2186 h_border: 0
[ 9138.972] (II) fglrx(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1128 v_border: 0
[ 9138.972] (II) fglrx(0): 35K06�B156HW2
[ 9138.972] (II) fglrx(0): Unknown vendor-specific block 0
[ 9138.972] (II) fglrx(0): EDID (in hex):
[ 9138.972] (II) fglrx(0): 00ffffffffffff0006afed2100000000
[ 9138.972] (II) fglrx(0): 041501049022137802e2b59e59529926
[ 9138.972] (II) fglrx(0): 1e505400000001010101010101010101
[ 9138.972] (II) fglrx(0): 010101010101d039800a713830406414
[ 9138.972] (II) fglrx(0): aa0058c21000001a8b26800a71383040
[ 9138.972] (II) fglrx(0): 6414aa0058c21000001a000000fe0033
[ 9138.972] (II) fglrx(0): 354b3036804231353648573200000000
[ 9138.972] (II) fglrx(0): 000041219e0000000002010a20200016
[ 9138.972] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 9138.972] (II) fglrx(0): Printing probed modes for output LVDS1
[ 9138.972] (II) fglrx(0): Modeline "1920x1080"x60.0 148.00 1920 2020 2040 2186 1080 1090 1100 1128 +hsync -vsync (67.7 kHz eP)
[ 9138.972] (II) fglrx(0): Modeline "1920x1080"x40.0 98.67 1920 2020 2040 2186 1080 1090 1100 1128 +hsync -vsync (45.1 kHz e)
[ 9138.972] (II) fglrx(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 9138.972] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 9138.972] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 9138.972] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 9138.972] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 9138.972] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 9138.972] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 9138.976] (II) fglrx(0): EDID for output VGA1
[ 9138.977] (II) fglrx(0): EDID for output HDMI1
[ 9139.001] (II) fglrx(0): EDID for output DP1
[ 9139.001] (II) fglrx(0): Output LVDS1 connected
[ 9139.001] (II) fglrx(0): Output VGA1 disconnected
[ 9139.001] (II) fglrx(0): Output HDMI1 disconnected
[ 9139.001] (II) fglrx(0): Output DP1 disconnected
[ 9139.001] (II) fglrx(0): Using exact sizes for initial modes
[ 9139.001] (II) fglrx(0): Output LVDS1 using initial mode 1920x1080
[ 9139.001] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9139.001] (==) fglrx(0): DPI set to (96, 96)
[ 9139.001] (II) Loading sub module "dri2"
[ 9139.001] (II) LoadModule: "dri2"
[ 9139.001] (II) Module "dri2" already built-in
[ 9139.001] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 9139.001] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 9139.001] (==) fglrx(0): Default visual is TrueColor
[ 9139.001] (**) fglrx(0): Option "DPMS" "true"
[ 9139.001] (==) fglrx(0): RGB weight 888
[ 9139.001] (II) fglrx(0): Using 8 bits per RGB
[ 9139.001] (==) fglrx(0): Buffer Tiling is ON
[ 9139.001] (II) Loading sub module "fglrxdrm"
[ 9139.001] (II) LoadModule: "fglrxdrm"
[ 9139.001] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 9139.001] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 9139.001] compiled for 1.4.99.906, module version = 9.1.11
[ 9139.002] ukiDynamicMajor: found major device number 250
[ 9139.002] ukiDynamicMajor: found major device number 250
[ 9139.002] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9139.002] ukiOpenDevice: node name is /dev/ati/card0
[ 9139.002] ukiOpenDevice: open result is 14, (OK)
[ 9139.002] ukiOpenByBusid: ukiOpenMinor returns 14
[ 9139.002] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9139.003] (**) fglrx(0): NoAccel = NO
[ 9139.003] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 9139.003] (--) fglrx(0): Chipset: "AMD Radeon HD 7700M Series " (Chipset = 0x682f)
[ 9139.003] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x0572)
[ 9139.003] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 9139.003] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[ 9139.003] (--) fglrx(0): MMIO registers at 0xc0000000
[ 9139.003] (--) fglrx(0): I/O port at 0x00003000
[ 9139.003] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 9139.003] (II) fglrx(0): AC Adapter is used
[ 9139.003] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 9139.003] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3
[ 9139.003] (II) fglrx(0): PCIE card detected
[ 9139.003] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 9139.003] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 9139.011] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 9139.011] (II) fglrx(0): RandR 1.2 support is enabled!
[ 9139.011] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 9139.011] (==) fglrx(0): Center Mode is disabled
[ 9139.011] (II) Loading sub module "fb"
[ 9139.011] (II) LoadModule: "fb"
[ 9139.011] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 9139.012] (II) Module fb: vendor="X.Org Foundation"
[ 9139.012] compiled for 1.13.1, module version = 1.0.0
[ 9139.012] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9139.012] (II) Loading sub module "ddc"
[ 9139.012] (II) LoadModule: "ddc"
[ 9139.012] (II) Module "ddc" already built-in
[ 9139.019] (II) fglrx(0): Eyefinity capable adapter detected.
[ 9139.019] (II) fglrx(0): Adapter AMD Radeon HD 7700M Series has 6 configurable heads and 0 displays connected.
[ 9139.019] (==) fglrx(0): PseudoColor visuals disabled
[ 9139.019] (II) Loading sub module "ramdac"
[ 9139.019] (II) LoadModule: "ramdac"
[ 9139.019] (II) Module "ramdac" already built-in
[ 9139.019] (==) fglrx(0): NoDRI = NO
[ 9139.019] (==) fglrx(0): Capabilities: 0x00000000
[ 9139.019] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 9139.019] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 9139.019] (==) fglrx(0): UseFastTLS=0
[ 9139.019] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[ 9139.019] (--) Depth 24 pixmap format is 32 bpp
[ 9139.019] (II) LoadModule: "glesx"
[ 9139.019] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 9139.020] (II) Module glesx: vendor="X.Org Foundation"
[ 9139.020] compiled for 1.4.99.906, module version = 1.0.0
[ 9139.020] Loading extension GLESX
[ 9139.020] (II) fglrx(0): SNA initialized with IvyBridge backend
[ 9139.020] (==) fglrx(0): Backing store disabled
[ 9139.020] (==) fglrx(0): Silken mouse enabled
[ 9139.020] (II) fglrx(0): HW Cursor enabled
[ 9139.020] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9139.020] (**) fglrx(0): DPMS enabled
[ 9139.020] (II) fglrx(0): [DRI2] Setup complete
[ 9139.020] (II) fglrx(0): [DRI2] DRI driver: i965
[ 9139.020] (II) fglrx(0): direct rendering: DRI2 Enabled
[ 9139.020] (WW) fglrx(0): Option "VendorName" is not used
[ 9139.020] (WW) fglrx(0): Option "ModelName" is not used
[ 9139.020] (WW) fglrx(0): Option "Shadow" is not used
[ 9139.020] (WW) fglrx(0): Option "Tiling" is not used
[ 9139.020] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 9139.020] (==) fglrx(0): hotplug detection: "enabled"
[ 9139.021] Loading extension ATIFGLRXDRI
[ 9139.021] (II) fglrx(0): doing swlDriScreenInit
[ 9139.021] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 9139.021] ukiDynamicMajor: found major device number 250
[ 9139.021] ukiDynamicMajor: found major device number 250
[ 9139.021] ukiDynamicMajor: found major device number 250
[ 9139.021] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9139.021] ukiOpenDevice: node name is /dev/ati/card0
[ 9139.021] ukiOpenDevice: open result is 16, (OK)
[ 9139.021] ukiOpenByBusid: ukiOpenMinor returns 16
[ 9139.021] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9139.021] (II) fglrx(0): [uki] DRM interface version 1.0
[ 9139.021] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 9139.021] (II) fglrx(0): [uki] added 8192 byte SAREA at 0xaa000
[ 9139.021] (II) fglrx(0): [uki] mapped SAREA 0xaa000 to 0x7feaa2e13000
[ 9139.021] (II) fglrx(0): [uki] framebuffer handle = 0xab000
[ 9139.021] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 9139.021] (II) fglrx(0): swlDriScreenInit done
[ 9139.021] (II) fglrx(0): Kernel Module Version Information:
[ 9139.021] (II) fglrx(0): Name: fglrx
[ 9139.021] (II) fglrx(0): Version: 9.1.11
[ 9139.021] (II) fglrx(0): Date: Dec 19 2012
[ 9139.021] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 9139.021] (II) fglrx(0): Kernel Module version matches driver.
[ 9139.021] (II) fglrx(0): Kernel Module Build Time Information:
[ 9139.021] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.6.11-gentoo
[ 9139.021] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 9139.021] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 9139.021] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 9139.021] (II) fglrx(0): [uki] register handle = 0x000ac000
[ 9139.022] (II) fglrx(0): DRI initialization successfull
[ 9139.022] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 9139.022] (II) fglrx(0): Intel display surface mc addr for AMD: ffed973000
[ 9139.022] (==) fglrx(0): Backing store disabled
[ 9139.022] Loading extension FGLRXEXTENSION
[ 9139.022] (**) fglrx(0): DPMS enabled
[ 9139.023] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 9139.023] (**) fglrx(0): Textured Video is enabled.
[ 9139.023] (II) fglrx(0): GLESX enableFlags = 848
[ 9139.023] (II) fglrx(0): GLESX is enabled
[ 9139.023] (II) LoadModule: "amdxmm"
[ 9139.023] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 9139.023] (II) Module amdxmm: vendor="X.Org Foundation"
[ 9139.023] compiled for 1.4.99.906, module version = 2.0.0
[ 9139.023] Loading extension AMDXVOPL
[ 9139.023] Loading extension AMDXVBA
[ 9139.023] XvScreenInit: screen devPrivates ptr non-NULL before init
[ 9139.024] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 9139.025] (II) fglrx(0): Enable composite support successfully
[ 9139.025] (WW) fglrx(0): Option "VendorName" is not used
[ 9139.025] (WW) fglrx(0): Option "ModelName" is not used
[ 9139.025] (WW) fglrx(0): Option "Shadow" is not used
[ 9139.025] (WW) fglrx(0): Option "Tiling" is not used
[ 9139.025] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 9139.025] (II) fglrx(0): X context handle = 0x9
[ 9139.025] (II) fglrx(0): [DRI] installation complete
[ 9139.053] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf40b6e0000 width=0xa00 height=0x1900
[ 9139.053] (--) RandR disabled
[ 9139.058] ukiDynamicMajor: found major device number 250
[ 9139.058] ukiDynamicMajor: found major device number 250
[ 9139.058] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9139.058] ukiOpenDevice: node name is /dev/ati/card0
[ 9139.058] ukiOpenDevice: open result is 17, (OK)
[ 9139.058] ukiOpenByBusid: ukiOpenMinor returns 17
[ 9139.058] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9139.130] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 9139.140] (EE) fglrx(0): Failed to allocate caches, disabling RENDER acceleration
[ 9139.147] (EE) fglrx(0): [intel] Failed to allocate video resources for front buffer 1920x1080 at depth 24
[ 9139.147]
Fatal server error:
[ 9139.147] failed to create screen resources
[ 9139.147] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 9139.147] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 9139.147] (EE)
[ 9139.147] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 9139.147] (II) fglrx(0): Backup framebuffer data.
[ 9139.158] (II) fglrx(0): Backup complete.
[ 9139.169] Server terminated with error (1). Closing log file. |
|
Back to top |
|
|
deutronium n00b
Joined: 15 Jan 2008 Posts: 16
|
Posted: Mon Jan 28, 2013 11:00 pm Post subject: |
|
|
I've just tried removing xf86-video-intel and without that and the ATI xorg.conf
I get an X segfault:
Code: |
[ 14039.972]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 14039.976] X Protocol Version 11, Revision 0
[ 14039.977] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
[ 14039.978] Current Operating System: Linux icarus 3.6.11-gentoo #6 SMP Mon Jan 28 18:56:20 GMT 2013 x86_64
[ 14039.978] Kernel command line: root=/dev/sda3 vga=6 iwlwifi.wd_disable=1 intel_iommu=on
[ 14039.981] Build Date: 22 January 2013 01:23:05AM
[ 14039.983]
[ 14039.984] Current version of pixman: 0.28.0
[ 14039.987] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14039.987] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14039.993] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 28 22:51:24 2013
[ 14039.994] (==) Using config file: "/etc/X11/xorg.conf"
[ 14039.995] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14039.996] (==) ServerLayout "aticonfig Layout"
[ 14039.996] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 14039.996] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 14039.996] (**) | |-->Device "aticonfig-Device[0]-0"
[ 14039.996] (==) Automatically adding devices
[ 14039.996] (==) Automatically enabling devices
[ 14039.996] (==) Automatically adding GPU devices
[ 14039.996] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 14039.996] Entry deleted from font path.
[ 14039.996] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 14039.996] Entry deleted from font path.
[ 14039.996] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 14039.996] Entry deleted from font path.
[ 14039.996] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 14039.996] Entry deleted from font path.
[ 14039.996] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 14039.996] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 14039.996] Entry deleted from font path.
[ 14039.996] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 14039.996] (==) FontPath set to:
/usr/share/fonts/misc/
[ 14039.996] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 14039.996] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14039.996] (II) Loader magic: 0x80ec00
[ 14039.996] (II) Module ABI versions:
[ 14039.996] X.Org ANSI C Emulation: 0.4
[ 14039.996] X.Org Video Driver: 13.1
[ 14039.996] X.Org XInput driver : 18.0
[ 14039.996] X.Org Server Extension : 7.0
[ 14039.996] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 14039.997] (--) PCI:*(0:0:2:0) 8086:0166:1028:0572 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[ 14039.997] (--) PCI: (0:1:0:0) 1002:682f:1028:0572 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 14039.997] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 14039.999] Initializing built-in extension Generic Event Extension
[ 14040.000] Initializing built-in extension SHAPE
[ 14040.002] Initializing built-in extension MIT-SHM
[ 14040.003] Initializing built-in extension XInputExtension
[ 14040.004] Initializing built-in extension XTEST
[ 14040.006] Initializing built-in extension BIG-REQUESTS
[ 14040.007] Initializing built-in extension SYNC
[ 14040.009] Initializing built-in extension XKEYBOARD
[ 14040.010] Initializing built-in extension XC-MISC
[ 14040.011] Initializing built-in extension XINERAMA
[ 14040.012] Initializing built-in extension XFIXES
[ 14040.014] Initializing built-in extension RENDER
[ 14040.015] Initializing built-in extension RANDR
[ 14040.016] Initializing built-in extension COMPOSITE
[ 14040.017] Initializing built-in extension DAMAGE
[ 14040.019] Initializing built-in extension MIT-SCREEN-SAVER
[ 14040.020] Initializing built-in extension DOUBLE-BUFFER
[ 14040.021] Initializing built-in extension RECORD
[ 14040.022] Initializing built-in extension DPMS
[ 14040.023] Initializing built-in extension X-Resource
[ 14040.025] Initializing built-in extension XVideo
[ 14040.026] Initializing built-in extension XVideo-MotionCompensation
[ 14040.027] Initializing built-in extension XFree86-VidModeExtension
[ 14040.028] Initializing built-in extension XFree86-DGA
[ 14040.029] Initializing built-in extension XFree86-DRI
[ 14040.030] Initializing built-in extension DRI2
[ 14040.030] (II) "glx" will be loaded by default.
[ 14040.030] (II) LoadModule: "glx"
[ 14040.030] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 14040.030] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 14040.030] compiled for 6.9.0, module version = 1.0.0
[ 14040.032] Loading extension GLX
[ 14040.032] (II) LoadModule: "fglrx"
[ 14040.032] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 14040.044] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 14040.044] compiled for 1.4.99.906, module version = 9.1.11
[ 14040.044] Module class: X.Org Video Driver
[ 14040.045] (II) Loading sub module "fglrxdrm"
[ 14040.045] (II) LoadModule: "fglrxdrm"
[ 14040.045] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 14040.045] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 14040.045] compiled for 1.4.99.906, module version = 9.1.11
[ 14040.045] (II) AMD Proprietary Linux Driver Version Identifier:9.01.11
[ 14040.045] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-9.01.8
[ 14040.045] (II) AMD Proprietary Linux Driver Build Date: Dec 2 2012 02:19:57
[ 14040.045] (--) using VT number 7
[ 14040.050] (WW) Falling back to old probe method for fglrx
[ 14040.055] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 14040.056] ukiDynamicMajor: found major device number 250
[ 14040.056] ukiDynamicMajor: found major device number 250
[ 14040.056] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 14040.056] ukiOpenDevice: node name is /dev/ati/card0
[ 14040.056] ukiOpenDevice: open result is 9, (OK)
[ 14040.056] ukiOpenByBusid: ukiOpenMinor returns 9
[ 14040.056] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 14040.118] (--) Chipset Supported AMD Graphics Processor (0x682F) found
[ 14040.118] (II) fglrx: intel VGA device detected, load intel driver.
[ 14040.118] (II) LoadModule: "intel"
[ 14040.118] (WW) Warning, couldn't open module intel
[ 14040.118] (II) UnloadModule: "intel"
[ 14040.118] (II) Unloading intel
[ 14040.118] (EE) Failed to load module "intel" (module does not exist, 0)
[ 14040.118] (WW) fglrx: Fail to load intel driver!
[ 14040.118] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 14040.118] (II) AMD Video driver is signed
[ 14040.119] (II) fglrx(0): pEnt->device->identifier=0x2804670
[ 14040.119] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 14040.119] (EE)
[ 14040.119] (EE) Backtrace:
[ 14040.119] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x59aec6]
[ 14040.119] (EE) 1: /usr/bin/X (0x400000+0x19edc9) [0x59edc9]
[ 14040.119] (EE) 2: /lib64/libpthread.so.0 (0x7f8d3be28000+0x10460) [0x7f8d3be38460]
[ 14040.119] (EE) 3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxPxPreInit+0xd6) [0x7f8d392fc0d6]
[ 14040.119] (EE) 4: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxPreInit+0x1fcb) [0x7f8d392d8bcb]
[ 14040.119] (EE) 5: /usr/bin/X (InitOutput+0x9de) [0x47da3e]
[ 14040.119] (EE) 6: /usr/bin/X (0x400000+0x281c3) [0x4281c3]
[ 14040.119] (EE) 7: /lib64/libc.so.6 (__libc_start_main+0xfd) [0x7f8d3aab64bd]
[ 14040.120] (EE) 8: /usr/bin/X (0x400000+0x27f29) [0x427f29]
[ 14040.120] (EE)
[ 14040.120] (EE) Segmentation fault at address 0x0
[ 14040.120]
Fatal server error:
[ 14040.120] Caught signal 11 (Segmentation fault). Server aborting
[ 14040.120]
[ 14040.120] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 14040.120] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 14040.120] (EE)
[ 14040.131] Server terminated with error (1). Closing log file.
|
|
|
Back to top |
|
|
FRIGN n00b
Joined: 12 Jan 2013 Posts: 23 Location: Germany
|
Posted: Tue Jan 29, 2013 6:56 pm Post subject: |
|
|
deutronium wrote: | I've just tried removing xf86-video-intel and without that and the ATI xorg.conf
I get an X segfault:
Code: |
[ 14039.972]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 14039.976] X Protocol Version 11, Revision 0
[ 14039.977] Build Operating System: Linux 3.4.9-gentoo x86_64 Gentoo
[ 14039.978] Current Operating System: Linux icarus 3.6.11-gentoo #6 SMP Mon Jan 28 18:56:20 GMT 2013 x86_64
[ 14039.978] Kernel command line: root=/dev/sda3 vga=6 iwlwifi.wd_disable=1 intel_iommu=on
[ 14039.981] Build Date: 22 January 2013 01:23:05AM
[ 14039.983]
[ 14039.984] Current version of pixman: 0.28.0
[ 14039.987] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14039.987] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14039.993] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 28 22:51:24 2013
[ 14039.994] (==) Using config file: "/etc/X11/xorg.conf"
[ 14039.995] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14039.996] (==) ServerLayout "aticonfig Layout"
[ 14039.996] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 14039.996] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 14039.996] (**) | |-->Device "aticonfig-Device[0]-0"
[ 14039.996] (==) Automatically adding devices
[ 14039.996] (==) Automatically enabling devices
[ 14039.996] (==) Automatically adding GPU devices
[ 14039.996] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 14039.996] Entry deleted from font path.
[ 14039.996] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 14039.996] Entry deleted from font path.
[ 14039.996] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 14039.996] Entry deleted from font path.
[ 14039.996] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 14039.996] Entry deleted from font path.
[ 14039.996] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 14039.996] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 14039.996] Entry deleted from font path.
[ 14039.996] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 14039.996] (==) FontPath set to:
/usr/share/fonts/misc/
[ 14039.996] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 14039.996] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14039.996] (II) Loader magic: 0x80ec00
[ 14039.996] (II) Module ABI versions:
[ 14039.996] X.Org ANSI C Emulation: 0.4
[ 14039.996] X.Org Video Driver: 13.1
[ 14039.996] X.Org XInput driver : 18.0
[ 14039.996] X.Org Server Extension : 7.0
[ 14039.996] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 14039.997] (--) PCI:*(0:0:2:0) 8086:0166:1028:0572 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[ 14039.997] (--) PCI: (0:1:0:0) 1002:682f:1028:0572 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 14039.997] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 14039.999] Initializing built-in extension Generic Event Extension
[ 14040.000] Initializing built-in extension SHAPE
[ 14040.002] Initializing built-in extension MIT-SHM
[ 14040.003] Initializing built-in extension XInputExtension
[ 14040.004] Initializing built-in extension XTEST
[ 14040.006] Initializing built-in extension BIG-REQUESTS
[ 14040.007] Initializing built-in extension SYNC
[ 14040.009] Initializing built-in extension XKEYBOARD
[ 14040.010] Initializing built-in extension XC-MISC
[ 14040.011] Initializing built-in extension XINERAMA
[ 14040.012] Initializing built-in extension XFIXES
[ 14040.014] Initializing built-in extension RENDER
[ 14040.015] Initializing built-in extension RANDR
[ 14040.016] Initializing built-in extension COMPOSITE
[ 14040.017] Initializing built-in extension DAMAGE
[ 14040.019] Initializing built-in extension MIT-SCREEN-SAVER
[ 14040.020] Initializing built-in extension DOUBLE-BUFFER
[ 14040.021] Initializing built-in extension RECORD
[ 14040.022] Initializing built-in extension DPMS
[ 14040.023] Initializing built-in extension X-Resource
[ 14040.025] Initializing built-in extension XVideo
[ 14040.026] Initializing built-in extension XVideo-MotionCompensation
[ 14040.027] Initializing built-in extension XFree86-VidModeExtension
[ 14040.028] Initializing built-in extension XFree86-DGA
[ 14040.029] Initializing built-in extension XFree86-DRI
[ 14040.030] Initializing built-in extension DRI2
[ 14040.030] (II) "glx" will be loaded by default.
[ 14040.030] (II) LoadModule: "glx"
[ 14040.030] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 14040.030] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 14040.030] compiled for 6.9.0, module version = 1.0.0
[ 14040.032] Loading extension GLX
[ 14040.032] (II) LoadModule: "fglrx"
[ 14040.032] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 14040.044] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 14040.044] compiled for 1.4.99.906, module version = 9.1.11
[ 14040.044] Module class: X.Org Video Driver
[ 14040.045] (II) Loading sub module "fglrxdrm"
[ 14040.045] (II) LoadModule: "fglrxdrm"
[ 14040.045] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 14040.045] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 14040.045] compiled for 1.4.99.906, module version = 9.1.11
[ 14040.045] (II) AMD Proprietary Linux Driver Version Identifier:9.01.11
[ 14040.045] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-9.01.8
[ 14040.045] (II) AMD Proprietary Linux Driver Build Date: Dec 2 2012 02:19:57
[ 14040.045] (--) using VT number 7
[ 14040.050] (WW) Falling back to old probe method for fglrx
[ 14040.055] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 14040.056] ukiDynamicMajor: found major device number 250
[ 14040.056] ukiDynamicMajor: found major device number 250
[ 14040.056] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 14040.056] ukiOpenDevice: node name is /dev/ati/card0
[ 14040.056] ukiOpenDevice: open result is 9, (OK)
[ 14040.056] ukiOpenByBusid: ukiOpenMinor returns 9
[ 14040.056] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 14040.118] (--) Chipset Supported AMD Graphics Processor (0x682F) found
[ 14040.118] (II) fglrx: intel VGA device detected, load intel driver.
[ 14040.118] (II) LoadModule: "intel"
[ 14040.118] (WW) Warning, couldn't open module intel
[ 14040.118] (II) UnloadModule: "intel"
[ 14040.118] (II) Unloading intel
[ 14040.118] (EE) Failed to load module "intel" (module does not exist, 0)
[ 14040.118] (WW) fglrx: Fail to load intel driver!
[ 14040.118] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 14040.118] (II) AMD Video driver is signed
[ 14040.119] (II) fglrx(0): pEnt->device->identifier=0x2804670
[ 14040.119] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 14040.119] (EE)
[ 14040.119] (EE) Backtrace:
[ 14040.119] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x59aec6]
[ 14040.119] (EE) 1: /usr/bin/X (0x400000+0x19edc9) [0x59edc9]
[ 14040.119] (EE) 2: /lib64/libpthread.so.0 (0x7f8d3be28000+0x10460) [0x7f8d3be38460]
[ 14040.119] (EE) 3: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxPxPreInit+0xd6) [0x7f8d392fc0d6]
[ 14040.119] (EE) 4: /usr/lib64/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxPreInit+0x1fcb) [0x7f8d392d8bcb]
[ 14040.119] (EE) 5: /usr/bin/X (InitOutput+0x9de) [0x47da3e]
[ 14040.119] (EE) 6: /usr/bin/X (0x400000+0x281c3) [0x4281c3]
[ 14040.119] (EE) 7: /lib64/libc.so.6 (__libc_start_main+0xfd) [0x7f8d3aab64bd]
[ 14040.120] (EE) 8: /usr/bin/X (0x400000+0x27f29) [0x427f29]
[ 14040.120] (EE)
[ 14040.120] (EE) Segmentation fault at address 0x0
[ 14040.120]
Fatal server error:
[ 14040.120] Caught signal 11 (Segmentation fault). Server aborting
[ 14040.120]
[ 14040.120] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 14040.120] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 14040.120] (EE)
[ 14040.131] Server terminated with error (1). Closing log file.
|
|
I would re-emerge xorg-server
Code: | emerge -av xorg-server |
and do a revdep-rebuild afterwards.
Note that it might pull in xf86-video-intel as a dependency when intel is specified under VIDEO_CARDS in your make.conf.
Modify it accordingly. |
|
Back to top |
|
|
deutronium n00b
Joined: 15 Jan 2008 Posts: 16
|
|
Back to top |
|
|
FRIGN n00b
Joined: 12 Jan 2013 Posts: 23 Location: Germany
|
Posted: Tue Jan 29, 2013 8:03 pm Post subject: |
|
|
Great job!
I should really get used to the thought that when software fails after an upgrade the newer version might be the problem . |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|