View previous topic :: View next topic |
Author |
Message |
Sujao l33t
Joined: 25 Sep 2004 Posts: 677 Location: Germany
|
Posted: Sat Jan 12, 2013 8:52 am Post subject: Various SATA problems, one cause? |
|
|
I have been having various problems with SATA drives. It started out years ago with a DVD drive not working, then sometimes hdd's weren't beeing recognized on boot until I reset. Also sometimes after running smartctl -t short on another hdd it stopped being recognized at all until I reset my computer. Because it happened rarely I couldn't really determine the cause.
Recently I bought a new hdd and created a new gpt partition, a luks partition and ran pvcreate /dev/sdd2 The command aborted with an error message and the drive was changed to /dev/sdg2, after I tried it again it got changed to sdd2 again. It seems the hard drive is being resetted and assigned a new device file.
I wonder whether any of you can help me to track down the problem with the supplied logs, maybe I can finally solve the mystery whether its the SATA controller, the hdds or the software.
I am using kernel 3.3.8-gentoo.
/var/log/messages
Code: | Jan 12 09:20:52 hostname kernel: [ 180.465717] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 1, phase 0, 19 us
Jan 12 09:21:01 hostname kernel: [ 188.882794] ln used greatest stack depth: 4080 bytes left
Jan 12 09:21:02 hostname dbus[2606]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
Jan 12 09:21:02 hostname dbus[2606]: [system] Successfully activated service 'org.freedesktop.UPower'
Jan 12 09:21:03 hostname dbus[2606]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Jan 12 09:21:03 hostname dbus[2606]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jan 12 09:21:03 hostname kernel: [ 190.907054] ata1.00: configured for UDMA/133
Jan 12 09:21:03 hostname kernel: [ 190.907059] ata1: EH complete
Jan 12 09:21:03 hostname kernel: [ 190.946768] ata2.00: configured for UDMA/133
Jan 12 09:21:03 hostname kernel: [ 190.946772] ata2: EH complete
Jan 12 09:21:03 hostname kernel: [ 191.256536] ata3.00: configured for UDMA/133
Jan 12 09:21:03 hostname kernel: [ 191.256540] ata3: EH complete
Jan 12 09:21:03 hostname kernel: [ 191.408987] ata4.00: configured for UDMA/133
Jan 12 09:21:03 hostname kernel: [ 191.408990] ata4: EH complete
Jan 12 09:21:04 hostname kernel: [ 191.557176] ata5.00: configured for UDMA/133
Jan 12 09:21:04 hostname kernel: [ 191.557179] ata5: EH complete
Jan 12 09:21:04 hostname kernel: [ 191.577515] ata6.00: configured for UDMA/133
Jan 12 09:21:04 hostname kernel: [ 191.577521] ata6: EH complete
Jan 12 09:21:06 hostname kernel: [ 193.641580] EXT4-fs (dm-0): re-mounted. Opts: commit=0
Jan 12 09:21:06 hostname kernel: [ 194.449035] EXT4-fs (dm-3): re-mounted. Opts: commit=0
Jan 12 09:21:30 hostname polkitd[2701]: Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.24 [/usr/lib64/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jan 12 09:23:08 hostname kernel: [ 315.494396] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0xc00001 action 0x6 frozen
Jan 12 09:23:08 hostname kernel: [ 315.494398] ata4.00: irq_stat 0x08000000, interface fatal error
Jan 12 09:23:08 hostname kernel: [ 315.494401] ata4: SError: { RecovData Handshk LinkSeq }
Jan 12 09:23:08 hostname kernel: [ 315.494403] ata4.00: failed command: READ FPDMA QUEUED
Jan 12 09:23:08 hostname kernel: [ 315.494407] ata4.00: cmd 60/08:00:00:50:a4/00:00:0b:00:00/40 tag 0 ncq 4096 in
Jan 12 09:23:08 hostname kernel: [ 315.494408] res 40/00:04:70:9e:50/00:00:5d:01:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:23:08 hostname kernel: [ 315.494410] ata4.00: status: { DRDY }
Jan 12 09:23:08 hostname kernel: [ 315.494413] ata4: hard resetting link
Jan 12 09:23:08 hostname kernel: [ 315.954020] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:23:08 hostname kernel: [ 315.956039] ata4.00: configured for UDMA/133
Jan 12 09:23:08 hostname kernel: [ 315.967014] ata4: EH complete
Jan 12 09:24:44 hostname kernel: [ 411.894125] ata4.00: exception Emask 0x10 SAct 0x3 SErr 0x400101 action 0x6 frozen
Jan 12 09:24:44 hostname kernel: [ 411.894127] ata4.00: irq_stat 0x0c000000, interface fatal error
Jan 12 09:24:44 hostname kernel: [ 411.894129] ata4: SError: { RecovData UnrecovData Handshk }
Jan 12 09:24:44 hostname kernel: [ 411.894132] ata4.00: failed command: WRITE FPDMA QUEUED
Jan 12 09:24:44 hostname kernel: [ 411.894136] ata4.00: cmd 61/08:00:08:48:a4/00:00:0b:00:00/40 tag 0 ncq 4096 out
Jan 12 09:24:44 hostname kernel: [ 411.894136] res 40/00:04:08:48:a4/00:00:0b:00:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:24:44 hostname kernel: [ 411.894138] ata4.00: status: { DRDY }
Jan 12 09:24:44 hostname kernel: [ 411.894140] ata4.00: failed command: READ FPDMA QUEUED
Jan 12 09:24:44 hostname kernel: [ 411.894143] ata4.00: cmd 60/08:08:70:9e:50/00:00:5d:01:00/40 tag 1 ncq 4096 in
Jan 12 09:24:44 hostname kernel: [ 411.894144] res 40/00:04:08:48:a4/00:00:0b:00:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:24:44 hostname kernel: [ 411.894146] ata4.00: status: { DRDY }
Jan 12 09:24:44 hostname kernel: [ 411.894149] ata4: hard resetting link
Jan 12 09:24:44 hostname kernel: [ 412.354021] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:24:44 hostname kernel: [ 412.355128] ata4.00: configured for UDMA/133
Jan 12 09:24:44 hostname kernel: [ 412.366017] ata4: EH complete
Jan 12 09:24:44 hostname kernel: [ 412.366123] ata4.00: exception Emask 0x10 SAct 0x3 SErr 0x400101 action 0x6 frozen
Jan 12 09:24:44 hostname kernel: [ 412.366125] ata4.00: irq_stat 0x08000000, interface fatal error
Jan 12 09:24:44 hostname kernel: [ 412.366127] ata4: SError: { RecovData UnrecovData Handshk }
Jan 12 09:24:44 hostname kernel: [ 412.366129] ata4.00: failed command: READ FPDMA QUEUED
Jan 12 09:24:44 hostname kernel: [ 412.366133] ata4.00: cmd 60/08:00:70:9e:50/00:00:5d:01:00/40 tag 0 ncq 4096 in
Jan 12 09:24:44 hostname kernel: [ 412.366134] res 40/00:0c:08:48:a4/00:00:0b:00:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:24:44 hostname kernel: [ 412.366135] ata4.00: status: { DRDY }
Jan 12 09:24:44 hostname kernel: [ 412.366137] ata4.00: failed command: WRITE FPDMA QUEUED
Jan 12 09:24:44 hostname kernel: [ 412.366140] ata4.00: cmd 61/08:08:08:48:a4/00:00:0b:00:00/40 tag 1 ncq 4096 out
Jan 12 09:24:44 hostname kernel: [ 412.366141] res 40/00:0c:08:48:a4/00:00:0b:00:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:24:44 hostname kernel: [ 412.366143] ata4.00: status: { DRDY }
Jan 12 09:24:44 hostname kernel: [ 412.366145] ata4: hard resetting link
Jan 12 09:24:45 hostname kernel: [ 412.826015] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:24:45 hostname kernel: [ 412.828072] ata4.00: configured for UDMA/133
Jan 12 09:24:45 hostname kernel: [ 412.839014] ata4: EH complete
Jan 12 09:24:45 hostname kernel: [ 412.839098] ata4: limiting SATA link speed to 1.5 Gbps
Jan 12 09:24:45 hostname kernel: [ 412.839102] ata4.00: exception Emask 0x10 SAct 0x3 SErr 0x400101 action 0x6 frozen
Jan 12 09:24:45 hostname kernel: [ 412.839104] ata4.00: irq_stat 0x08000000, interface fatal error
Jan 12 09:24:45 hostname kernel: [ 412.839106] ata4: SError: { RecovData UnrecovData Handshk }
Jan 12 09:24:45 hostname kernel: [ 412.839108] ata4.00: failed command: WRITE FPDMA QUEUED
Jan 12 09:24:45 hostname kernel: [ 412.839112] ata4.00: cmd 61/08:00:08:48:a4/00:00:0b:00:00/40 tag 0 ncq 4096 out
Jan 12 09:24:45 hostname kernel: [ 412.839113] res 40/00:0c:70:9e:50/00:00:5d:01:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:24:45 hostname kernel: [ 412.839114] ata4.00: status: { DRDY }
Jan 12 09:24:45 hostname kernel: [ 412.839116] ata4.00: failed command: READ FPDMA QUEUED
Jan 12 09:24:45 hostname kernel: [ 412.839119] ata4.00: cmd 60/08:08:70:9e:50/00:00:5d:01:00/40 tag 1 ncq 4096 in
Jan 12 09:24:45 hostname kernel: [ 412.839120] res 40/00:0c:70:9e:50/00:00:5d:01:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:24:45 hostname kernel: [ 412.839122] ata4.00: status: { DRDY }
Jan 12 09:24:45 hostname kernel: [ 412.839125] ata4: hard resetting link
Jan 12 09:24:47 hostname kernel: [ 415.046015] ata4: SATA link down (SStatus 1 SControl 310)
Jan 12 09:24:47 hostname kernel: [ 415.049550] ata4: hard resetting link
Jan 12 09:24:49 hostname kernel: [ 417.256015] ata4: SATA link down (SStatus 1 SControl 310)
Jan 12 09:24:49 hostname kernel: [ 417.259615] ata4: hard resetting link
Jan 12 09:24:51 hostname kernel: [ 419.466014] ata4: SATA link down (SStatus 1 SControl 310)
Jan 12 09:24:51 hostname kernel: [ 419.466019] ata4.00: disabled
Jan 12 09:24:52 hostname kernel: [ 419.477020] ata4: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4
Jan 12 09:24:52 hostname kernel: [ 419.477022] ata4: irq_stat 0x00000040, connection status changed
Jan 12 09:24:52 hostname kernel: [ 419.477024] ata4: SError: { CommWake DevExch }
Jan 12 09:24:52 hostname kernel: [ 419.477027] ata4: hard resetting link
Jan 12 09:24:52 hostname kernel: [ 420.355018] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:24:52 hostname kernel: [ 420.356432] ata4.00: ATA-9: WDC WD30EURS-63SPKY0, 80.00A80, max UDMA/133
Jan 12 09:24:52 hostname kernel: [ 420.356434] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Jan 12 09:24:52 hostname kernel: [ 420.356968] ata4.00: configured for UDMA/133
Jan 12 09:24:52 hostname kernel: [ 420.367017] sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 12 09:24:52 hostname kernel: [ 420.367020] sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor]
Jan 12 09:24:52 hostname kernel: [ 420.367023] Descriptor sense data with sense descriptors (in hex):
Jan 12 09:24:52 hostname kernel: [ 420.367024] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 01
Jan 12 09:24:52 hostname kernel: [ 420.367030] 5d 50 9e 70
Jan 12 09:24:52 hostname kernel: [ 420.367032] sd 3:0:0:0: [sdd] Add. Sense: No additional sense information
Jan 12 09:24:52 hostname kernel: [ 420.367035] sd 3:0:0:0: [sdd] CDB: Write(10): 2a 00 0b a4 48 08 00 00 08 00
Jan 12 09:24:52 hostname kernel: [ 420.367040] end_request: I/O error, dev sdd, sector 195315720
Jan 12 09:24:52 hostname kernel: [ 420.367060] sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 12 09:24:52 hostname kernel: [ 420.367062] sd 3:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor]
Jan 12 09:24:52 hostname kernel: [ 420.367065] Descriptor sense data with sense descriptors (in hex):
Jan 12 09:24:52 hostname kernel: [ 420.367066] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 01
Jan 12 09:24:52 hostname kernel: [ 420.367071] 5d 50 9e 70
Jan 12 09:24:52 hostname kernel: [ 420.367074] sd 3:0:0:0: [sdd] Add. Sense: No additional sense information
Jan 12 09:24:52 hostname kernel: [ 420.367076] sd 3:0:0:0: [sdd] CDB: Read(16): 88 00 00 00 00 01 5d 50 9e 70 00 00 00 08 00 00
Jan 12 09:24:52 hostname kernel: [ 420.367082] end_request: I/O error, dev sdd, sector 5860531824
Jan 12 09:24:52 hostname kernel: [ 420.367087] Buffer I/O error on device dm-12, logical block 708152014
Jan 12 09:24:52 hostname kernel: [ 420.367097] ata4: EH complete
Jan 12 09:24:52 hostname kernel: [ 420.367104] ata4.00: detaching (SCSI 3:0:0:0)
Jan 12 09:24:52 hostname kernel: [ 420.367119] Buffer I/O error on device dm-12, logical block 708152014
Jan 12 09:24:52 hostname kernel: [ 420.367153] Buffer I/O error on device dm-12, logical block 1
Jan 12 09:24:52 hostname kernel: [ 420.367159] Buffer I/O error on device dm-12, logical block 1
Jan 12 09:24:52 hostname kernel: [ 420.367166] Buffer I/O error on device dm-12, logical block 1
Jan 12 09:24:52 hostname kernel: [ 420.367191] Buffer I/O error on device dm-12, logical block 256
Jan 12 09:24:52 hostname kernel: [ 420.367200] Buffer I/O error on device dm-12, logical block 1
Jan 12 09:24:52 hostname kernel: [ 420.367207] Buffer I/O error on device dm-12, logical block 1
Jan 12 09:24:52 hostname kernel: [ 420.367213] Buffer I/O error on device dm-12, logical block 1
Jan 12 09:24:52 hostname kernel: [ 420.367219] Buffer I/O error on device dm-12, logical block 1
Jan 12 09:24:52 hostname kernel: [ 420.368188] sd 3:0:0:0: [sdd] Synchronizing SCSI cache
Jan 12 09:24:52 hostname kernel: [ 420.368273] sd 3:0:0:0: [sdd] Stopping disk
Jan 12 09:24:53 hostname kernel: [ 420.777923] scsi 3:0:0:0: Direct-Access ATA WDC WD30EURS-63S 80.0 PQ: 0 ANSI: 5
Jan 12 09:24:53 hostname kernel: [ 420.778027] sd 3:0:0:0: Attached scsi generic sg3 type 0
Jan 12 09:24:53 hostname kernel: [ 420.778047] sd 3:0:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Jan 12 09:24:53 hostname kernel: [ 420.778050] sd 3:0:0:0: [sdg] 4096-byte physical blocks
Jan 12 09:24:53 hostname kernel: [ 420.778084] sd 3:0:0:0: [sdg] Write Protect is off
Jan 12 09:24:53 hostname kernel: [ 420.778086] sd 3:0:0:0: [sdg] Mode Sense: 00 3a 00 00
Jan 12 09:24:53 hostname kernel: [ 420.778101] sd 3:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 12 09:24:55 hostname kernel: [ 422.494876] sdg: sdg1 sdg2
Jan 12 09:24:55 hostname kernel: [ 422.495093] sd 3:0:0:0: [sdg] Attached SCSI disk
Jan 12 09:27:36 hostname kernel: [ 583.906650] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x400101 action 0x6 frozen
Jan 12 09:27:36 hostname kernel: [ 583.906653] ata4.00: irq_stat 0x08000000, interface fatal error
Jan 12 09:27:36 hostname kernel: [ 583.906655] ata4: SError: { RecovData UnrecovData Handshk }
Jan 12 09:27:36 hostname kernel: [ 583.906657] ata4.00: failed command: WRITE FPDMA QUEUED
Jan 12 09:27:36 hostname kernel: [ 583.906661] ata4.00: cmd 61/08:00:08:48:a4/00:00:0b:00:00/40 tag 0 ncq 4096 out
Jan 12 09:27:36 hostname kernel: [ 583.906662] res 40/00:04:08:48:a4/00:00:0b:00:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:27:36 hostname kernel: [ 583.906664] ata4.00: status: { DRDY }
Jan 12 09:27:36 hostname kernel: [ 583.906667] ata4: hard resetting link
Jan 12 09:27:36 hostname kernel: [ 584.366013] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:27:36 hostname kernel: [ 584.367997] ata4.00: configured for UDMA/133
Jan 12 09:27:36 hostname kernel: [ 584.379014] ata4: EH complete
Jan 12 09:27:36 hostname kernel: [ 584.379090] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
Jan 12 09:27:36 hostname kernel: [ 584.379092] ata4.00: irq_stat 0x08000000, interface fatal error
Jan 12 09:27:36 hostname kernel: [ 584.379094] ata4: SError: { UnrecovData Handshk }
Jan 12 09:27:36 hostname kernel: [ 584.379096] ata4.00: failed command: WRITE FPDMA QUEUED
Jan 12 09:27:36 hostname kernel: [ 584.379100] ata4.00: cmd 61/08:00:08:48:a4/00:00:0b:00:00/40 tag 0 ncq 4096 out
Jan 12 09:27:36 hostname kernel: [ 584.379101] res 40/00:04:08:48:a4/00:00:0b:00:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:27:36 hostname kernel: [ 584.379103] ata4.00: status: { DRDY }
Jan 12 09:27:36 hostname kernel: [ 584.379106] ata4: hard resetting link
Jan 12 09:27:37 hostname kernel: [ 584.839019] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:27:37 hostname kernel: [ 584.839452] ata4.00: failed to read native max address (err_mask=0x100)
Jan 12 09:27:37 hostname kernel: [ 584.839455] ata4.00: HPA support seems broken, skipping HPA handling
Jan 12 09:27:37 hostname kernel: [ 584.839456] ata4.00: revalidation failed (errno=-5)
Jan 12 09:27:42 hostname kernel: [ 589.839015] ata4: hard resetting link
Jan 12 09:27:42 hostname kernel: [ 590.299016] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:27:42 hostname kernel: [ 590.299982] ata4.00: configured for UDMA/133
Jan 12 09:27:42 hostname kernel: [ 590.310013] ata4: EH complete
Jan 12 09:27:42 hostname kernel: [ 590.310091] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x400101 action 0x6 frozen
Jan 12 09:27:42 hostname kernel: [ 590.310093] ata4.00: irq_stat 0x08000000, interface fatal error
Jan 12 09:27:42 hostname kernel: [ 590.310095] ata4: SError: { RecovData UnrecovData Handshk }
Jan 12 09:27:42 hostname kernel: [ 590.310098] ata4.00: failed command: WRITE FPDMA QUEUED
Jan 12 09:27:42 hostname kernel: [ 590.310101] ata4.00: cmd 61/08:00:08:48:a4/00:00:0b:00:00/40 tag 0 ncq 4096 out
Jan 12 09:27:42 hostname kernel: [ 590.310102] res 40/00:04:08:48:a4/00:00:0b:00:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:27:42 hostname kernel: [ 590.310104] ata4.00: status: { DRDY }
Jan 12 09:27:42 hostname kernel: [ 590.310107] ata4: hard resetting link
Jan 12 09:27:43 hostname kernel: [ 590.770017] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:27:43 hostname kernel: [ 590.771662] ata4.00: configured for UDMA/133
Jan 12 09:27:43 hostname kernel: [ 590.782014] ata4: EH complete
Jan 12 09:27:43 hostname kernel: [ 590.782095] ata4: limiting SATA link speed to 1.5 Gbps
Jan 12 09:27:43 hostname kernel: [ 590.782099] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen
Jan 12 09:27:43 hostname kernel: [ 590.782101] ata4.00: irq_stat 0x08000000, interface fatal error
Jan 12 09:27:43 hostname kernel: [ 590.782103] ata4: SError: { UnrecovData Handshk }
Jan 12 09:27:43 hostname kernel: [ 590.782105] ata4.00: failed command: WRITE FPDMA QUEUED
Jan 12 09:27:43 hostname kernel: [ 590.782109] ata4.00: cmd 61/08:00:08:48:a4/00:00:0b:00:00/40 tag 0 ncq 4096 out
Jan 12 09:27:43 hostname kernel: [ 590.782109] res 40/00:04:08:48:a4/00:00:0b:00:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:27:43 hostname kernel: [ 590.782111] ata4.00: status: { DRDY }
Jan 12 09:27:43 hostname kernel: [ 590.782114] ata4: hard resetting link
Jan 12 09:27:45 hostname kernel: [ 592.989019] ata4: SATA link down (SStatus 1 SControl 310)
Jan 12 09:27:45 hostname kernel: [ 592.992543] ata4: hard resetting link
Jan 12 09:27:47 hostname kernel: [ 595.199016] ata4: SATA link down (SStatus 1 SControl 310)
Jan 12 09:27:47 hostname kernel: [ 595.202531] ata4: hard resetting link
Jan 12 09:27:49 hostname kernel: [ 597.409015] ata4: SATA link down (SStatus 1 SControl 310)
Jan 12 09:27:49 hostname kernel: [ 597.409020] ata4.00: disabled
Jan 12 09:27:49 hostname kernel: [ 597.420015] ata4: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4
Jan 12 09:27:49 hostname kernel: [ 597.420017] ata4: irq_stat 0x00000040, connection status changed
Jan 12 09:27:49 hostname kernel: [ 597.420019] ata4: SError: { CommWake DevExch }
Jan 12 09:27:49 hostname kernel: [ 597.420022] ata4: hard resetting link
Jan 12 09:27:50 hostname kernel: [ 598.298017] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:27:50 hostname kernel: [ 598.298569] ata4.00: ATA-9: WDC WD30EURS-63SPKY0, 80.00A80, max UDMA/133
Jan 12 09:27:50 hostname kernel: [ 598.298572] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Jan 12 09:27:50 hostname kernel: [ 598.300065] ata4.00: configured for UDMA/133
Jan 12 09:27:50 hostname kernel: [ 598.311013] sd 3:0:0:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 12 09:27:50 hostname kernel: [ 598.311016] sd 3:0:0:0: [sdg] Sense Key : Aborted Command [current] [descriptor]
Jan 12 09:27:50 hostname kernel: [ 598.311019] Descriptor sense data with sense descriptors (in hex):
Jan 12 09:27:50 hostname kernel: [ 598.311020] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Jan 12 09:27:50 hostname kernel: [ 598.311026] 0b a4 48 08
Jan 12 09:27:50 hostname kernel: [ 598.311028] sd 3:0:0:0: [sdg] Add. Sense: No additional sense information
Jan 12 09:27:50 hostname kernel: [ 598.311031] sd 3:0:0:0: [sdg] CDB: Write(10): 2a 00 0b a4 48 08 00 00 08 00
Jan 12 09:27:50 hostname kernel: [ 598.311037] end_request: I/O error, dev sdg, sector 195315720
Jan 12 09:27:50 hostname kernel: [ 598.311056] sd 3:0:0:0: rejecting I/O to offline device
Jan 12 09:27:50 hostname kernel: [ 598.311058] sd 3:0:0:0: killing request
Jan 12 09:27:50 hostname kernel: [ 598.311063] ata4: EH complete
Jan 12 09:27:50 hostname kernel: [ 598.311084] sd 3:0:0:0: rejecting I/O to offline device
Jan 12 09:27:50 hostname kernel: [ 598.311090] sd 3:0:0:0: rejecting I/O to offline device
Jan 12 09:27:50 hostname kernel: [ 598.311093] sd 3:0:0:0: rejecting I/O to offline device
Jan 12 09:27:50 hostname kernel: [ 598.311096] sd 3:0:0:0: [sdg] Asking for cache data failed
Jan 12 09:27:50 hostname kernel: [ 598.311097] sd 3:0:0:0: [sdg] Assuming drive cache: write through
Jan 12 09:27:50 hostname kernel: [ 598.311104] ata4.00: detaching (SCSI 3:0:0:0)
Jan 12 09:27:50 hostname kernel: [ 598.311936] sd 3:0:0:0: [sdg] Stopping disk
Jan 12 09:27:50 hostname kernel: [ 598.319136] quiet_error: 53 callbacks suppressed
Jan 12 09:27:50 hostname kernel: [ 598.319140] Buffer I/O error on device dm-12, logical block 708152063
Jan 12 09:27:50 hostname kernel: [ 598.319164] Buffer I/O error on device dm-12, logical block 708152063
Jan 12 09:27:50 hostname kernel: [ 598.319184] Buffer I/O error on device dm-12, logical block 708152063
Jan 12 09:27:50 hostname kernel: [ 598.319191] Buffer I/O error on device dm-12, logical block 708152063
Jan 12 09:27:50 hostname kernel: [ 598.319198] Buffer I/O error on device dm-12, logical block 708152063
Jan 12 09:27:50 hostname kernel: [ 598.319205] Buffer I/O error on device dm-12, logical block 708152063
Jan 12 09:27:50 hostname kernel: [ 598.319212] Buffer I/O error on device dm-12, logical block 708152063
Jan 12 09:27:50 hostname kernel: [ 598.319222] Buffer I/O error on device dm-12, logical block 708152056
Jan 12 09:27:50 hostname kernel: [ 598.319236] Buffer I/O error on device dm-12, logical block 1
Jan 12 09:27:50 hostname kernel: [ 598.319243] Buffer I/O error on device dm-12, logical block 1
Jan 12 09:27:51 hostname kernel: [ 598.721494] scsi 3:0:0:0: Direct-Access ATA WDC WD30EURS-63S 80.0 PQ: 0 ANSI: 5
Jan 12 09:27:51 hostname kernel: [ 598.721591] sd 3:0:0:0: Attached scsi generic sg3 type 0
Jan 12 09:27:51 hostname kernel: [ 598.721635] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Jan 12 09:27:51 hostname kernel: [ 598.721637] sd 3:0:0:0: [sdd] 4096-byte physical blocks
Jan 12 09:27:51 hostname kernel: [ 598.721667] sd 3:0:0:0: [sdd] Write Protect is off
Jan 12 09:27:51 hostname kernel: [ 598.721670] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Jan 12 09:27:51 hostname kernel: [ 598.721683] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 12 09:27:52 hostname kernel: [ 600.449354] sdd: sdd1 sdd2
Jan 12 09:27:52 hostname kernel: [ 600.449917] sd 3:0:0:0: [sdd] Attached SCSI disk
Jan 12 09:27:53 hostname kernel: [ 600.514124] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0xc00001 action 0x6 frozen
Jan 12 09:27:53 hostname kernel: [ 600.514127] ata4.00: irq_stat 0x08000000, interface fatal error
Jan 12 09:27:53 hostname kernel: [ 600.514129] ata4: SError: { RecovData Handshk LinkSeq }
Jan 12 09:27:53 hostname kernel: [ 600.514131] ata4.00: failed command: READ FPDMA QUEUED
Jan 12 09:27:53 hostname kernel: [ 600.514135] ata4.00: cmd 60/08:00:40:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Jan 12 09:27:53 hostname kernel: [ 600.514136] res 40/00:04:80:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
Jan 12 09:27:53 hostname kernel: [ 600.514137] ata4.00: status: { DRDY }
Jan 12 09:27:53 hostname kernel: [ 600.514141] ata4: hard resetting link
Jan 12 09:27:53 hostname kernel: [ 600.974015] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 12 09:27:53 hostname kernel: [ 600.975058] ata4.00: configured for UDMA/133
Jan 12 09:27:53 hostname kernel: [ 600.986015] ata4: EH complete |
# pvcreate /dev/mapper/storage4_new
Code: | /dev/mapper/storage4_new: write failed after 0 of 4096 at 4096: Input/output error
Failed to wipe new metadata area at the start of the /dev/mapper/storage4_new
Failed to add metadata area for new physical volume /dev/mapper/storage4_new
Failed to setup physical volume "/dev/mapper/storage4_new" |
|
|
Back to top |
|
|
DawgG l33t
Joined: 17 Sep 2003 Posts: 866
|
Posted: Sat Jan 12, 2013 1:14 pm Post subject: |
|
|
since it seems to happen with ALL drives, first thing i'd check was cables and mobo. if the mobo's "old" there might be a faulty capcitor or sth. similar.
to be really sure about the hardware you could run some tests from a rescue-cd, eg start smartmontools from it.
GOOD LUCK! _________________ DUMM KLICKT GUT. |
|
Back to top |
|
|
Sujao l33t
Joined: 25 Sep 2004 Posts: 677 Location: Germany
|
Posted: Sat Jan 12, 2013 1:24 pm Post subject: |
|
|
I thought about the situation and decided to buy a new mainboard. I doubt that several kernel versions were broken and that so many drives were faulty. Also I don't really think that SATA cables are that sensite (or are they?). I hope this solves the problem.
Still, if anyone can get something out of the logs I would be glad to learn that.
EDIT: I connected the new hdd with a different cable and pvcreate was successful |
|
Back to top |
|
|
DawgG l33t
Joined: 17 Sep 2003 Posts: 866
|
Posted: Sat Jan 12, 2013 4:22 pm Post subject: |
|
|
glad it works now!
sometimes not even the best software can repair defective hardware :wink: _________________ DUMM KLICKT GUT. |
|
Back to top |
|
|
Sujao l33t
Joined: 25 Sep 2004 Posts: 677 Location: Germany
|
Posted: Sat Jan 12, 2013 4:28 pm Post subject: |
|
|
I will check other cables with all other drives that malfunctioned in the past.
My onboard nic stopped working several years ago, too. So it lead me to believe that mainbaord failure is more probable. Also I can't imagine that half of my SATA cables are broken. |
|
Back to top |
|
|
syn0ptik Apprentice
Joined: 09 Jan 2013 Posts: 267
|
Posted: Sun Jan 13, 2013 2:45 am Post subject: |
|
|
It's not dm-raid? |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|