View previous topic :: View next topic |
Author |
Message |
duby2291 Guru
Joined: 17 Oct 2004 Posts: 583
|
Posted: Sun Jan 06, 2013 4:05 pm Post subject: Bios detects optical drives but kernel doesn't? SOLVED |
|
|
Yeah, the kernel isnt detecting my optical drivers. Some information for you guys to look at. My board has and AMD785G NB and a SB710 SB.
lspci -k
Code: |
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
Subsystem: Advanced Micro Devices [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
Kernel driver in use: pcieport
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)
Kernel driver in use: pcieport
00:11.0 RAID bus controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [Non-RAID5 mode]
Subsystem: Giga-byte Technology Device b002
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: ohci_hcd
00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: ohci_hcd
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: ehci_hcd
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: ohci_hcd
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: ohci_hcd
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: ehci_hcd
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c)
Subsystem: Giga-byte Technology GA-MA770-DS3rev2.0 Motherboard
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
Subsystem: Giga-byte Technology Device 5002
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
Subsystem: Giga-byte Technology Device a102
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: ohci_hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
Kernel driver in use: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Barts PRO [Radeon HD 6800 Series]
Subsystem: PC Partner Limited Device e174
Kernel driver in use: radeon
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Barts HDMI Audio [Radeon HD 6800 Series]
Subsystem: PC Partner Limited Device aa88
Kernel driver in use: snd_hda_intel
02:00.0 RAID bus controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
Subsystem: Silicon Image, Inc. Device 7132
Kernel driver in use: sata_sil24
|
Code: |
<*> RAID Transport Class
-*- SCSI device support
<*> SCSI target support
[*] legacy /proc/scsi/ support
*** SCSI support type (disk, tape, CD-ROM) ***
<*> SCSI disk support
< > SCSI tape support
< > SCSI OnStream SC-x0 tape support
<*> SCSI CDROM support
[ ] Enable vendor-specific extensions (for SCSI CDROM)
<*> SCSI generic support
< > SCSI media changer support
[*] Probe all LUNs on each SCSI device
[ ] Verbose SCSI error reporting (kernel size +=12K)
[ ] SCSI logging facility
[*] Asynchronous SCSI scanning
SCSI Transports --->
[ ] SCSI low-level drivers --->
< > SCSI Device Handlers --->
< > OSD-Initiator library
|
Code: |
--- Serial ATA and Parallel ATA drivers
[ ] Verbose ATA error reporting
[*] ATA ACPI Support
[ ] SATA Port Multiplier support
*** Controllers with non-SFF native interface ***
<*> AHCI SATA support
< > Platform AHCI SATA support
< > Initio 162x SATA support
< > ACard AHCI variant (ATP 8620)
<*> Silicon Image 3124/3132 SATA support
[*] ATA SFF support (for legacy IDE and PATA)
*** SFF controllers with custom DMA interface ***
< > Pacific Digital ADMA support
< > Pacific Digital SATA QStor support
< > Promise SATA SX4 support (Experimental)
[*] ATA BMDMA support
*** SATA SFF controllers with BMDMA ***
< > Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support
< > Marvell SATA support
< > NVIDIA SATA support
< > Promise SATA TX2/TX4 support
< > Silicon Image SATA support
< > SiS 964/965/966/180 SATA support
< > ServerWorks Frodo / Apple K2 SATA support
< > ULi Electronics SATA support
< > VIA SATA support
< > VITESSE VSC-7174 / INTEL 31244 SATA support
*** PATA SFF controllers with BMDMA ***
< > ALi PATA support
<*> AMD/NVidia PATA support
|
dmesg | grep scsi
Code: |
[ 0.308641] ACPI: bus type scsi registered
[ 1.985229] scsi0 : ahci
[ 1.985317] scsi1 : ahci
[ 1.985381] scsi2 : ahci
[ 1.985443] scsi3 : ahci
[ 1.985925] scsi4 : sata_sil24
[ 1.985991] scsi5 : sata_sil24
[ 4.993679] scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5
[ 4.994348] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.994798] scsi 1:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5
[ 4.995362] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.995808] scsi 4:0:0:0: Direct-Access ATA WDC WD2500AAKS-6 01.0 PQ: 0 ANSI: 5
[ 4.996353] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6.552497] scsi6 : usb-storage 3-3:1.0
[ 7.214940] scsi 5:0:0:0: Direct-Access ATA ST31000333AS CC1F PQ: 0 ANSI: 5
[ 7.215575] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 7.554676] scsi 6:0:0:0: Direct-Access Y-E DATA USB-FDU 7.03 PQ: 0 ANSI: 0 CCS
[ 7.556046] sd 6:0:0:0: Attached scsi generic sg4 type 0
|
dmesg | grep sd
Code: |
[ 0.000000] Command line: root=/dev/sdc3 splash=silent,fadein,theme:livedvd-12.0 console=tty1 quiet
[ 0.000000] Kernel command line: root=/dev/sdc3 splash=silent,fadein,theme:livedvd-12.0 console=tty1 quiet
[ 4.994179] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 4.994348] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.994356] sd 0:0:0:0: [sda] Write Protect is off
[ 4.994363] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.994446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.995200] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 4.995347] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.995353] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.995362] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.995412] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.996192] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.996330] sd 4:0:0:0: [sdc] Write Protect is off
[ 4.996337] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.996353] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.996396] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.009638] sdc: sdc1 sdc2 sdc3
[ 5.010571] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 5.016729] sdb: unknown partition table
[ 5.017306] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.020322] sda: sda1
[ 5.020333] sda: p1 size 312319602 extends beyond EOD, enabling native capacity
[ 5.020951] sda: sda1
[ 5.020957] sda: p1 size 312319602 extends beyond EOD, truncated
[ 5.021488] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.215375] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 7.215557] sd 5:0:0:0: [sdd] Write Protect is off
[ 7.215564] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 7.215575] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 7.215628] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.231980] sdd: sdd1
[ 7.232653] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 7.242850] EXT4-fs (sdc3): couldn't mount as ext3 due to feature incompatibilities
[ 7.252335] EXT4-fs (sdc3): couldn't mount as ext2 due to feature incompatibilities
[ 7.298540] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.556046] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 7.634431] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 13.235028] Adding 8000364k swap on /dev/sdc2. Priority:-1 extents:1 across:8000364k
[ 13.727455] EXT4-fs (sdc3): re-mounted. Opts: (null)
[ 13.986111] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 50.272702] EXT4-fs (sdc3): re-mounted. Opts: commit=0
[ 50.277740] EXT4-fs (sdc1): re-mounted. Opts: commit=0
|
dmesg | grep sr results with a big fat nothing.
But the Bios is detecting the optical drives. No detection in the kernel. I think I have the kernel configured properly. If you guys have any ideas what I'm doing wrong please let me know.
Last edited by duby2291 on Tue Jan 08, 2013 9:31 pm; edited 1 time in total |
|
Back to top |
|
|
roarinelk Guru
Joined: 04 Mar 2004 Posts: 520
|
Posted: Sun Jan 06, 2013 6:07 pm Post subject: Re: Bios detects optical drives but kernel doesn't? |
|
|
duby2291 wrote: |
Code: |
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
Subsystem: Giga-byte Technology Device 5002
|
|
You need to enable CONFIG_ATA_ATIIXP as well ("ATI PATA Support"). |
|
Back to top |
|
|
duby2291 Guru
Joined: 17 Oct 2004 Posts: 583
|
Posted: Tue Jan 08, 2013 9:31 pm Post subject: |
|
|
Yep that was exactly what it was. I had AMD/nVidia drivers selected when I needed ATi drivers. Thanks for pointing that out. All is well now.
EDIT: What I don't get about this is that both of my optical drives are SATA, but enabling this IDE driver made them work. Strange huh? |
|
Back to top |
|
|
roarinelk Guru
Joined: 04 Mar 2004 Posts: 520
|
Posted: Mon Jan 14, 2013 5:04 pm Post subject: |
|
|
duby2291 wrote: | Yep that was exactly what it was. I had AMD/nVidia drivers selected when I needed ATi drivers. Thanks for pointing that out. All is well now.
EDIT: What I don't get about this is that both of my optical drives are SATA, but enabling this IDE driver made them work. Strange huh? |
It's not strange, they just glued a ide-sata bridge to their old IDE controller hardware ;-) |
|
Back to top |
|
|
vode n00b
Joined: 16 Jul 2002 Posts: 35 Location: Finland
|
Posted: Sat Apr 13, 2013 2:23 pm Post subject: |
|
|
Thank you very much. This thread solved my problem too. |
|
Back to top |
|
|
s4e8 Guru
Joined: 29 Jul 2006 Posts: 311
|
Posted: Sun Apr 14, 2013 3:16 am Post subject: |
|
|
get in bios, disable the combined mode. this way you got 6 port ahci, no atiixp anymore. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|