View previous topic :: View next topic |
Author |
Message |
AlfaGTV n00b
Joined: 26 Jul 2003 Posts: 57 Location: Belgium
|
Posted: Thu Jan 03, 2013 7:55 pm Post subject: BTTV Tuner has no way to set tv freq |
|
|
On new years day my hard disk containing my root partition broke So I've reinstalled Gentoo on a spare hard disk. I managed to get everything working except for my very old Pinnacle PCTV card. It's an old PCI card that I've been using for many years, it has always worked with Gentoo. But I can't get it to work again. I think I have all the right kernel modules but still I can not watch tv in tvtime.
lspci gives me this:
01:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
dmesg:
24.437944] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 24.748845] bttv: driver version 0.9.19 loaded
[ 24.748852] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 24.749085] bttv: Bt8xx card found (0)
[ 24.749116] bttv: 0: Bt878 (rev 17) at 0000:01:04.0, irq: 19, latency: 132, mmio: 0xb3000000
[ 24.749169] bttv: 0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[ 24.749171] bttv: 0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[ 21.013192] ACPI: Invalid Power Resource to register!
[ 24.749270] bttv: 0: i2c: checking for MSP34xx @ 0x80... <7>[ 24.749824] i2c i2c-2: NAK from device addr 0x40 msg #0
[ 24.749842] not found
[ 24.749844] bttv: 0: pinnacle/mt: id=1 info="PAL / mono" radio=no
[ 24.749846] bttv: 0: tuner type=33
[ 24.751758] i2c i2c-2: NAK from device addr 0x40 msg #0
[ 24.785473] i2c i2c-2: NAK from device addr 0x45 msg #0
[ 24.895213] i2c i2c-2: NAK from device addr 0x41 msg #0
[ 24.895783] i2c i2c-2: NAK from device addr 0x40 msg #0
[ 24.896370] i2c i2c-2: NAK from device addr 0x4c msg #0
[ 24.896936] i2c i2c-2: NAK from device addr 0x42 msg #0
[ 24.897525] i2c i2c-2: NAK from device addr 0x5a msg #0
[ 24.898108] i2c i2c-2: NAK from device addr 0x5b msg #0
[ 24.898673] i2c i2c-2: NAK from device addr 0x58 msg #0
[ 24.899259] i2c i2c-2: NAK from device addr 0x4b msg #0
[ 24.899277] bttv: 0: audio absent, no audio device found!
[ 25.092375] i2c i2c-2: NAK from device addr 0x42 msg #0
[ 25.411150] tda9887 2-0043: creating new instance
[ 25.411155] tda9887 2-0043: tda988[5/6/7] found
[ 25.411752] tuner 2-0043: Tuner 74 found with type(s) Radio TV.
[ 25.520396] Chip ID is not zero. It is not a TEA5767
[ 25.520408] tuner 2-0060: Tuner -1 found with type(s) Radio TV.
[ 25.521714] DVB: Unable to find symbol microtune_attach()
[ 25.522421] bttv: 0: registered device video1
[ 25.522470] bttv: 0: registered device vbi0
[ 25.522487] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
[ 25.544024] bttv: PLL set ok
[ 25.544617] tuner 2-0060: Tuner has no way to set tv freq
[ 25.545192] i2c i2c-2: NAK from device addr 0x1a msg #0
[ 25.545760] i2c i2c-2: NAK from device addr 0x18 msg #0
[ 25.546364] i2c i2c-2: NAK from device addr 0x64 msg #0
[ 25.546930] i2c i2c-2: NAK from device addr 0x30 msg #0
[ 25.547503] i2c i2c-2: NAK from device addr 0x71 msg #0
[ 25.549974] tuner 2-0060: Tuner has no way to set tv freq
[ 25.550620] tuner 2-0060: Tuner has no way to set tv freq
[ 25.551260] tuner 2-0060: Tuner has no way to set tv freq
[ 25.551866] tuner 2-0060: Tuner has no way to set tv freq
I have tried compiling bttv in the kernel and as a module, but it gives the same result. I have tried to manually load the module (modprobe bttv card=39 tuner=33) but nothing seems to help. Am I overlooking something? _________________ Cuore Sportivo |
|
Back to top |
|
|
Jaglover Watchman
Joined: 29 May 2005 Posts: 8291 Location: Saint Amant, Acadiana
|
Posted: Thu Jan 03, 2013 10:17 pm Post subject: |
|
|
I just switched from 3.6.8 to 3.7.1 and had similar issue with my Haupauge card. I learned things have moved in kernel config and choices have changed. In case you lost your old kernel config you could boot with some good generic liveCD (Knoppix, whatever) and learn from dmesg what you need to enable. _________________ My Gentoo installation notes.
Please learn how to denote units correctly! |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Thu Jan 03, 2013 10:20 pm Post subject: |
|
|
AlfaGTV,
The videp chip driver is bt8x8 and the sound is bt878 audio, I think. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
AlfaGTV n00b
Joined: 26 Jul 2003 Posts: 57 Location: Belgium
|
Posted: Fri Jan 04, 2013 4:50 pm Post subject: |
|
|
lsmod output:
Module Size Used by
nvidia 11212257 30
tda9887 8566 1
tda8290 12540 0
tuner 16436 2
tvaudio 24589 0
tda7432 4144 0
bttv 110260 0
i2c_algo_bit 6609 1 bttv
videobuf_dma_sg 7209 1 bttv
videobuf_core 14899 2 bttv,videobuf_dma_sg
btcx_risc 3156 1 bttv
tveeprom 13754 1 bttv
snd_bt87x 8759 2
Am I missing a module?
I'll try booting from the livecd later today and see what modules are loaded. _________________ Cuore Sportivo |
|
Back to top |
|
|
AlfaGTV n00b
Joined: 26 Jul 2003 Posts: 57 Location: Belgium
|
Posted: Sat Jan 05, 2013 3:19 pm Post subject: |
|
|
Did a make mrproper and tried a dozen different kernels. And suddenly it worked
lsmog gives this:
Module Size Used by
nvidia 11212257 30
tuner 16436 2
tvaudio 24461 0
tda7432 4144 0
msp3400 27388 0
bttv 109380 1
videobuf_dma_sg 7209 1 bttv
videobuf_core 14899 2 bttv,videobuf_dma_sg
btcx_risc 3156 1 bttv
snd_bt87x 8759 3
tveeprom 13754 1 bttv _________________ Cuore Sportivo |
|
Back to top |
|
|
|