silhard
n00b
Joined: 01 Nov 2012
Posts: 6
|
 Posted: Mon Nov 19, 2012 11:26 am Post subject: Gnome 3 Fallback Mode |
 |
|
Hi all
I installed gentoo on a virtualbox guest and some problems with the gnome 3: from time to time it starts in standard experience but most of the time i only get the fallback mode and i dont know why.
in the X0rg.0.log file i get a AIGLX error:
| Code: |
[ 27.496]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 27.496] X Protocol Version 11, Revision 0
[ 27.496] Build Operating System: Linux 3.3.8-gentoo i686 Gentoo
[ 27.496] Current Operating System: Linux pilatus 3.3.8-gentoo #7 SMP Wed Nov 14 22:54:30 CET 2012 i686
[ 27.496] Kernel command line: root=/dev/sda3 video=uvesafb:mtrr:3,ywrap,1024x768-24@60
[ 27.496] Build Date: 14 November 2012 02:06:50PM
[ 27.496]
[ 27.496] Current version of pixman: 0.26.0
[ 27.496] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.496] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.496] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 19 12:11:28 2012
[ 27.578] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.617] (==) No Layout section. Using the first Screen section.
[ 27.617] (==) No screen section available. Using defaults.
[ 27.617] (**) |-->Screen "Default Screen Section" (0)
[ 27.617] (**) | |-->Monitor "<default monitor>"
[ 27.642] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.642] (==) Automatically adding devices
[ 27.642] (==) Automatically enabling devices
[ 27.687] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 27.687] Entry deleted from font path.
[ 27.687] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.687] Entry deleted from font path.
[ 27.687] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 27.687] Entry deleted from font path.
[ 27.703] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 27.703] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.703] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.703] (II) Loader magic: 0x81f5580
[ 27.703] (II) Module ABI versions:
[ 27.703] X.Org ANSI C Emulation: 0.4
[ 27.703] X.Org Video Driver: 12.0
[ 27.703] X.Org XInput driver : 16.0
[ 27.703] X.Org Server Extension : 6.0
[ 27.705] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/67108864
[ 27.705] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 27.705] (II) LoadModule: "extmod"
[ 27.824] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 27.841] (II) Module extmod: vendor="X.Org Foundation"
[ 27.841] compiled for 1.12.2, module version = 1.0.0
[ 27.842] Module class: X.Org Server Extension
[ 27.842] ABI class: X.Org Server Extension, version 6.0
[ 27.842] (II) Loading extension MIT-SCREEN-SAVER
[ 27.842] (II) Loading extension XFree86-VidModeExtension
[ 27.842] (II) Loading extension XFree86-DGA
[ 27.842] (II) Loading extension DPMS
[ 27.842] (II) Loading extension XVideo
[ 27.842] (II) Loading extension XVideo-MotionCompensation
[ 27.842] (II) Loading extension X-Resource
[ 27.842] (II) LoadModule: "dbe"
[ 27.842] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 27.850] (II) Module dbe: vendor="X.Org Foundation"
[ 27.850] compiled for 1.12.2, module version = 1.0.0
[ 27.850] Module class: X.Org Server Extension
[ 27.850] ABI class: X.Org Server Extension, version 6.0
[ 27.850] (II) Loading extension DOUBLE-BUFFER
[ 27.850] (II) LoadModule: "glx"
[ 27.851] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.932] (II) Module glx: vendor="X.Org Foundation"
[ 27.932] compiled for 1.12.2, module version = 1.0.0
[ 27.932] ABI class: X.Org Server Extension, version 6.0
[ 27.932] (==) AIGLX enabled
[ 27.932] (II) Loading extension GLX
[ 27.932] (II) LoadModule: "record"
[ 27.932] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 27.944] (II) Module record: vendor="X.Org Foundation"
[ 27.944] compiled for 1.12.2, module version = 1.13.0
[ 27.944] Module class: X.Org Server Extension
[ 27.944] ABI class: X.Org Server Extension, version 6.0
[ 27.944] (II) Loading extension RECORD
[ 27.944] (II) LoadModule: "dri"
[ 27.944] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.996] (II) Module dri: vendor="X.Org Foundation"
[ 28.009] compiled for 1.12.2, module version = 1.0.0
[ 28.009] ABI class: X.Org Server Extension, version 6.0
[ 28.009] (II) Loading extension XFree86-DRI
[ 28.009] (II) LoadModule: "dri2"
[ 28.009] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.033] (II) Module dri2: vendor="X.Org Foundation"
[ 28.033] compiled for 1.12.2, module version = 1.2.0
[ 28.033] ABI class: X.Org Server Extension, version 6.0
[ 28.033] (II) Loading extension DRI2
[ 28.033] (==) Matched vboxvideo as autoconfigured driver 0
[ 28.033] (==) Matched vesa as autoconfigured driver 1
[ 28.033] (==) Matched fbdev as autoconfigured driver 2
[ 28.033] (==) Assigned the driver to the xf86ConfigLayout
[ 28.033] (II) LoadModule: "vboxvideo"
[ 28.033] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[ 28.052] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 28.052] compiled for 10.12.0, module version = 1.0.1
[ 28.052] Module class: X.Org Video Driver
[ 28.052] ABI class: X.Org Video Driver, version 12.0
[ 28.052] (**) Load address of symbol "VBOXVIDEO" is 0xb727d240
[ 28.052] (II) LoadModule: "vesa"
[ 28.053] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 28.070] (II) Module vesa: vendor="X.Org Foundation"
[ 28.070] compiled for 1.12.2, module version = 2.3.1
[ 28.071] Module class: X.Org Video Driver
[ 28.071] ABI class: X.Org Video Driver, version 12.0
[ 28.071] (II) LoadModule: "fbdev"
[ 28.071] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 28.081] (II) Module fbdev: vendor="X.Org Foundation"
[ 28.081] compiled for 1.12.2, module version = 0.4.2
[ 28.081] ABI class: X.Org Video Driver, version 12.0
[ 28.081] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 28.081] (II) VESA: driver for VESA chipsets: vesa
[ 28.081] (II) FBDEV: driver for framebuffer: fbdev
[ 28.081] (++) using VT number 7
[ 28.091] (WW) Falling back to old probe method for vesa
[ 28.091] (WW) Falling back to old probe method for fbdev
[ 28.091] (II) Loading sub module "fbdevhw"
[ 28.091] (II) LoadModule: "fbdevhw"
[ 28.091] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 28.116] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 28.116] compiled for 1.12.2, module version = 0.0.2
[ 28.116] ABI class: X.Org Video Driver, version 12.0
[ 28.117] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.2.4_OSE
[ 28.117] (II) Loading sub module "ramdac"
[ 28.117] (II) LoadModule: "ramdac"
[ 28.117] (II) Module "ramdac" already built-in
[ 28.117] (II) Loading sub module "fb"
[ 28.117] (II) LoadModule: "fb"
[ 28.117] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 28.128] (II) Module fb: vendor="X.Org Foundation"
[ 28.128] compiled for 1.12.2, module version = 1.0.0
[ 28.128] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.128] (II) Loading sub module "shadowfb"
[ 28.128] (II) LoadModule: "shadowfb"
[ 28.128] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 28.129] (II) Module shadowfb: vendor="X.Org Foundation"
[ 28.129] compiled for 1.12.2, module version = 1.0.0
[ 28.129] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.129] (II) Loading sub module "vgahw"
[ 28.129] (II) LoadModule: "vgahw"
[ 28.171] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 28.191] (II) Module vgahw: vendor="X.Org Foundation"
[ 28.191] compiled for 1.12.2, module version = 0.1.0
[ 28.191] ABI class: X.Org Video Driver, version 12.0
[ 28.191] (II) Loading sub module "dri"
[ 28.191] (II) LoadModule: "dri"
[ 28.191] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 28.191] (II) Module dri: vendor="X.Org Foundation"
[ 28.191] compiled for 1.12.2, module version = 1.0.0
[ 28.191] ABI class: X.Org Server Extension, version 6.0
[ 28.192] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 28.192] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 28.193] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[ 28.193] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 78.6 MHz (scaled from 0.0 MHz), 54.4 kHz, 60.0 Hz
[ 28.193] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 78.60 1440 1442 1444 1446 900 902 904 906 (54.4 kHz b)
[ 28.193] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 78.6 MHz (scaled from 0.0 MHz), 54.4 kHz, 60.0 Hz
[ 28.193] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 78.60 1440 1442 1444 1446 900 902 904 906 (54.4 kHz b)
[ 28.193] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 78.6 MHz (scaled from 0.0 MHz), 54.4 kHz, 60.0 Hz
[ 28.193] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 78.60 1440 1442 1444 1446 900 902 904 906 (54.4 kHz b)
[ 28.193] (**) VBoxVideo(0): Built-in mode "VBox-1600x1200": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[ 28.193] (II) VBoxVideo(0): Modeline "VBox-1600x1200"x0.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz b)
[ 28.193] (**) VBoxVideo(0): Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz
[ 28.193] (II) VBoxVideo(0): Modeline "VBox-1440x1050"x0.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz b)
[ 28.193] (**) VBoxVideo(0): Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz
[ 28.193] (II) VBoxVideo(0): Modeline "VBox-1280x960"x0.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz b)
[ 28.193] (**) VBoxVideo(0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 28.193] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 28.193] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 28.193] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 28.193] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[ 28.193] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 28.193] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 28.193] (==) VBoxVideo(0): RGB weight 888
[ 28.193] (==) VBoxVideo(0): Default visual is TrueColor
[ 28.193] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 28.193] (==) VBoxVideo(0): DPI set to (96, 96)
[ 28.193] (II) UnloadModule: "vesa"
[ 28.193] (II) Unloading vesa
[ 28.193] (II) UnloadModule: "fbdev"
[ 28.193] (II) Unloading fbdev
[ 28.193] (II) UnloadSubModule: "fbdevhw"
[ 28.193] (II) Unloading fbdevhw
[ 28.193] (--) Depth 24 pixmap format is 32 bpp
[ 28.250] drmOpenDevice: node name is /dev/dri/card0
[ 28.971] drmOpenDevice: node name is /dev/dri/card0
[ 29.754] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 29.754] drmOpenDevice: node name is /dev/dri/card0
[ 29.754] drmOpenDevice: open result is 9, (OK)
[ 29.754] drmOpenByBusid: drmOpenMinor returns 9
[ 29.754] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 29.754] (II) [drm] loaded kernel module for "vboxvideo" driver.
[ 29.754] (II) [drm] DRM interface version 1.4
[ 29.754] (II) [drm] DRM open master succeeded.
[ 29.754] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[ 29.754] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[ 29.754] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[ 29.754] (II) VBoxVideo(0): X context handle = 0x1
[ 29.754] (II) VBoxVideo(0): [drm] installed DRM signal handler
[ 29.754] (II) VBoxVideo(0): visual configurations initialized
[ 29.769] (II) VBoxVideo(0): Requested monitor count: 1
[ 29.769] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 29.769] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 29.770] (II) VBoxVideo(0): EDID for output VBOX0
[ 29.770] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 58983840
[ 29.770] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 29.770] (II) VBoxVideo(0): EDID Version: 1.3
[ 29.770] (II) VBoxVideo(0): Digital Display Input
[ 29.770] (II) VBoxVideo(0): Indeterminate output size
[ 29.770] (II) VBoxVideo(0): Gamma: 2.20
[ 29.770] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 29.770] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 29.770] (II) VBoxVideo(0): Default color space is primary color space
[ 29.770] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 29.770] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 29.770] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 29.770] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 29.770] (II) VBoxVideo(0): Supported detailed timing:
[ 29.770] (II) VBoxVideo(0): clock: 78.6 MHz Image Size: 0 x 0 mm
[ 29.770] (II) VBoxVideo(0): h_active: 1440 h_sync: 1442 h_sync_end 1444 h_blank_end 1446 h_border: 0
[ 29.770] (II) VBoxVideo(0): v_active: 900 v_sync: 902 v_sync_end 904 v_blanking: 906 v_border: 0
[ 29.770] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 29.770] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 29.770] (II) VBoxVideo(0): EDID (in hex):
[ 29.771] (II) VBoxVideo(0): 00ffffffffffff0058580000a0058403
[ 29.771] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 29.771] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 29.771] (II) VBoxVideo(0): 010101010101b41ea006508406300202
[ 29.771] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 29.771] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 29.771] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 29.771] (II) VBoxVideo(0): 000a2020202020202020202020200091
[ 29.771] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 29.771] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[ 29.771] (II) VBoxVideo(0): Using hsync ranges from config file
[ 29.771] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 29.771] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 29.771] (II) VBoxVideo(0): Modeline "1440x900"x0.0 78.60 1440 1442 1444 1446 900 902 904 906 -hsync -vsync (54.4 kHz eP)
[ 29.771] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[ 29.771] (II) VBoxVideo(0): Modeline "1440x900"x60.0 78.60 1440 1442 1444 1446 900 902 904 906 (54.4 kHz Pb)
[ 29.771] (II) VBoxVideo(0): Modeline "1600x1200"x60.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz b)
[ 29.771] (II) VBoxVideo(0): Modeline "1440x1050"x60.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz b)
[ 29.771] (II) VBoxVideo(0): Modeline "1280x960"x60.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz b)
[ 29.771] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 29.771] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 29.771] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 29.771] (II) VBoxVideo(0): Output VBOX0 connected
[ 29.771] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 29.771] (II) VBoxVideo(0): Output VBOX0 using initial mode 1440x900
[ 29.771] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29.783] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.784] (==) VBoxVideo(0): DPMS enabled
[ 29.784] (II) VBoxVideo(0): [DRI] installation complete
[ 29.784] (--) RandR disabled
[ 29.784] (II) Initializing built-in extension Generic Event Extension
[ 29.784] (II) Initializing built-in extension SHAPE
[ 29.784] (II) Initializing built-in extension MIT-SHM
[ 29.784] (II) Initializing built-in extension XInputExtension
[ 29.784] (II) Initializing built-in extension XTEST
[ 29.784] (II) Initializing built-in extension BIG-REQUESTS
[ 29.784] (II) Initializing built-in extension SYNC
[ 29.784] (II) Initializing built-in extension XKEYBOARD
[ 29.784] (II) Initializing built-in extension XC-MISC
[ 29.784] (II) Initializing built-in extension XINERAMA
[ 29.784] (II) Initializing built-in extension XFIXES
[ 29.784] (II) Initializing built-in extension RENDER
[ 29.784] (II) Initializing built-in extension RANDR
[ 29.784] (II) Initializing built-in extension COMPOSITE
[ 29.784] (II) Initializing built-in extension DAMAGE
[ 29.795] (II) AIGLX: Screen 0 is not DRI2 capable
[ 29.795] drmOpenDevice: node name is /dev/dri/card0
[ 29.795] drmOpenDevice: open result is 10, (OK)
[ 29.795] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 29.795] drmOpenDevice: node name is /dev/dri/card0
[ 29.795] drmOpenDevice: open result is 10, (OK)
[ 29.795] drmOpenByBusid: drmOpenMinor returns 10
[ 29.795] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 29.795] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 29.969] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[ 29.969] (II) The file referenced, is *NOT* loaded
[ 29.969] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[ 29.969] (EE) AIGLX error: vboxvideo does not export required DRI extension
[ 29.969] (EE) AIGLX: reverting to software rendering
[ 30.423] (II) AIGLX: Loaded and initialized swrast
[ 30.423] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 30.424] (II) VBoxVideo(0): Setting screen physical size to 380 x 238
[ 30.499] [dix] Could not init font path element /usr/share/fonts/100dpi/, removing from list!
[ 30.507] [dix] Could not init font path element /usr/share/fonts/75dpi/, removing from list!
[ 31.009] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 31.009] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.009] (II) LoadModule: "evdev"
[ 31.009] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.053] (II) Module evdev: vendor="X.Org Foundation"
[ 31.053] compiled for 1.12.2, module version = 2.7.0
[ 31.053] Module class: X.Org XInput Driver
[ 31.053] ABI class: X.Org XInput driver, version 16.0
[ 31.053] (II) Using input driver 'evdev' for 'Power Button'
[ 31.053] (**) Power Button: always reports core events
[ 31.054] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 31.054] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.054] (--) evdev: Power Button: Found keys
[ 31.054] (II) evdev: Power Button: Configuring as keyboard
[ 31.054] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 31.054] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 31.054] (**) Option "xkb_rules" "evdev"
[ 31.054] (**) Option "xkb_model" "evdev"
[ 31.054] (**) Option "xkb_layout" "us"
[ 31.089] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 31.089] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 31.089] (II) Using input driver 'evdev' for 'Sleep Button'
[ 31.089] (**) Sleep Button: always reports core events
[ 31.089] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 31.089] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 31.089] (--) evdev: Sleep Button: Found keys
[ 31.089] (II) evdev: Sleep Button: Configuring as keyboard
[ 31.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input3/event3"
[ 31.089] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 31.089] (**) Option "xkb_rules" "evdev"
[ 31.089] (**) Option "xkb_model" "evdev"
[ 31.089] (**) Option "xkb_layout" "us"
[ 31.090] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event4)
[ 31.090] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[ 31.090] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[ 31.090] (**) VirtualBox mouse integration: always reports core events
[ 31.090] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event4"
[ 31.090] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[ 31.090] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[ 31.090] (--) evdev: VirtualBox mouse integration: Found absolute axes
[ 31.090] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[ 31.090] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[ 31.090] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[ 31.090] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[ 31.090] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.090] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input4/event4"
[ 31.090] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8)
[ 31.090] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[ 31.090] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[ 31.090] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[ 31.090] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[ 31.090] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[ 31.090] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js0)
[ 31.090] (II) No input driver specified, ignoring this device.
[ 31.090] (II) This device may have been added with another device file.
[ 31.091] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event6)
[ 31.091] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 31.091] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[ 31.091] (**) VirtualBox USB Tablet: always reports core events
[ 31.091] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event6"
[ 31.091] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[ 31.091] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[ 31.091] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[ 31.091] (--) evdev: VirtualBox USB Tablet: Found relative axes
[ 31.091] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[ 31.091] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[ 31.091] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[ 31.091] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[ 31.091] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[ 31.091] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 31.091] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.091] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input6/event6"
[ 31.091] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9)
[ 31.091] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[ 31.091] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[ 31.091] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[ 31.091] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[ 31.091] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[ 31.091] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[ 31.091] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js1)
[ 31.091] (II) No input driver specified, ignoring this device.
[ 31.091] (II) This device may have been added with another device file.
[ 31.092] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[ 31.092] (II) No input driver specified, ignoring this device.
[ 31.092] (II) This device may have been added with another device file.
[ 31.092] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 31.092] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 31.092] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 31.092] (**) AT Translated Set 2 keyboard: always reports core events
[ 31.092] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 31.092] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 31.092] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 31.092] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 31.092] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 31.092] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 31.092] (**) Option "xkb_rules" "evdev"
[ 31.092] (**) Option "xkb_model" "evdev"
[ 31.092] (**) Option "xkb_layout" "us"
[ 31.093] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1)
[ 31.093] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 31.093] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 31.093] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 31.093] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1"
[ 31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 31.093] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 31.093] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 31.093] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 31.093] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 31.093] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.093] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[ 31.093] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
[ 31.093] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 31.093] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 31.093] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 31.093] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 31.093] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 31.093] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 31.093] (II) No input driver specified, ignoring this device.
[ 31.093] (II) This device may have been added with another device file.
[ 31.094] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 31.094] (II) No input driver specified, ignoring this device.
[ 31.094] (II) This device may have been added with another device file.
[ 31.142] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 31.142] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[ 31.142] (II) VBoxVideo(0): Using hsync ranges from config file
[ 31.142] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 31.142] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 31.142] (II) VBoxVideo(0): Modeline "1440x900"x0.0 78.60 1440 1442 1444 1446 900 902 904 906 -hsync -vsync (54.4 kHz eP)
[ 42.840] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 42.840] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[ 42.840] (II) VBoxVideo(0): Using hsync ranges from config file
[ 42.840] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 42.840] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 42.840] (II) VBoxVideo(0): Modeline "1440x900"x0.0 78.60 1440 1442 1444 1446 900 902 904 906 -hsync -vsync (54.4 kHz eP)
[ 56.596] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 56.596] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[ 56.596] (II) VBoxVideo(0): Using hsync ranges from config file
[ 56.596] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 56.596] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 56.596] (II) VBoxVideo(0): Modeline "1440x900"x0.0 78.60 1440 1442 1444 1446 900 902 904 906 -hsync -vsync (54.4 kHz eP)
[ 61.532] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 61.532] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[ 61.532] (II) VBoxVideo(0): Using hsync ranges from config file
[ 61.532] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 61.532] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 61.532] (II) VBoxVideo(0): Modeline "1440x900"x0.0 78.60 1440 1442 1444 1446 900 902 904 906 -hsync -vsync (54.4 kHz eP)
|
the xinitrc:
| Code: |
export XDG_MENU_PREFIX=gnome-
exec ck-launch-session gnome-session
|
$ glxinfo | grep rendering
--> gives me back direct rendering: yes
i already tried to reinstall the guest additions 4.2.4 several times as well as the drivers:
x11-drivers/xf86-input-evdev
x11-drivers/xf86-input-keyboard
x11-drivers/xf86-input-mouse
x11-drivers/xf86-input-synaptics
x11-drivers/xf86-video-fbdev
x11-drivers/xf86-video-vesa
x11-drivers/xf86-video-virtualbox
host is a macbook pro late 2011 and its completley arbitrary when gnome 3 starts in fallback or standard. i also have the aiglx error once the standard experience works.
any idea? |
|
Desktop Environments
