View previous topic :: View next topic |
Author |
Message |
Sindbad Tux's lil' helper
Joined: 10 Apr 2007 Posts: 85
|
Posted: Wed Oct 10, 2012 9:44 pm Post subject: parole videoplayer dbus |
|
|
Hallo, ich will den videoplayer parole ausprobieren, da ich auch opera mit gstreamer habe.
emergen klappte, aber nach Eingabe von Code: | parole --device=/home/sebastian/daten/meinProbevideo |
bekam ich diese Fehlermeldung Code: | ** ERROR **: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead
Trace/breakpoint trap |
Was muss ich tun? |
|
Back to top |
|
|
xenobyte n00b
Joined: 30 Nov 2011 Posts: 14
|
Posted: Thu Oct 11, 2012 9:51 am Post subject: |
|
|
Überprüfe ob $DBUS_SESSION_BUS_ADDRESS richtig gesetzt ist. Eventuell hilft ein
Code: |
export DBUS_SESSION_BUS_ADDRESS="unix:path=/var/run/dbus/system_bus_socket"
|
_________________ Ich neige zur Redundanz und manchmal wiederhole ich mich auch |
|
Back to top |
|
|
Sindbad Tux's lil' helper
Joined: 10 Apr 2007 Posts: 85
|
Posted: Thu Oct 11, 2012 7:43 pm Post subject: |
|
|
Ok, gemacht und jetzt bekomme ich Code: | ** ERROR **: Failed to connect to socket /var/run/dbus/system_bus_socket: Connection refused
Trace/breakpoint trap |
|
|
Back to top |
|
|
xenobyte n00b
Joined: 30 Nov 2011 Posts: 14
|
Posted: Fri Oct 12, 2012 8:08 am Post subject: |
|
|
Was sagt ein
Code: |
ls -la /var/run/dbus/
| ?
Läuft dbus überhaupt?
Code: |
/etc/init.d/dbus status
|
_________________ Ich neige zur Redundanz und manchmal wiederhole ich mich auch |
|
Back to top |
|
|
Sindbad Tux's lil' helper
Joined: 10 Apr 2007 Posts: 85
|
Posted: Fri Oct 12, 2012 5:04 pm Post subject: |
|
|
Nein, er laeuft nicht, status stopped..
dbus-launch ergibt mir : Code: |
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-O6ig9P7jEX,guid=9287e5bcf636c7fff9c496663c3182e0
DBUS_SESSION_BUS_PID=1521 |
Muss ch das irgendwohin exportieren? |
|
Back to top |
|
|
xenobyte n00b
Joined: 30 Nov 2011 Posts: 14
|
Posted: Fri Oct 19, 2012 8:00 am Post subject: |
|
|
eigentlich sollte ein
Code: |
/etc/init.d/dbus start
|
ausreichen... _________________ Ich neige zur Redundanz und manchmal wiederhole ich mich auch |
|
Back to top |
|
|
Schorchgrinder Tux's lil' helper
Joined: 30 Jun 2006 Posts: 82 Location: Lower Uncton
|
Posted: Fri Oct 19, 2012 11:55 am Post subject: |
|
|
Code: | gentoo64 ~ # rc-status
Runlevel: default
dbus [ started ] |
aber sollte mich wunder wen der dbus nicht schon läuft _________________ AMD Athlon 1000 Mhz, RIVA TNT2/TNT2 Pro, Creative Labs SB Live, 1500 MB Arbeitsspeicher
damit läuft der Rechner unter Gentoo immer noch recht gut
AMD Athlon II X4 600e 2200 Mhz, Nvidia G210, 4GB RAM |
|
Back to top |
|
|
Sindbad Tux's lil' helper
Joined: 10 Apr 2007 Posts: 85
|
Posted: Fri Oct 26, 2012 3:17 pm Post subject: |
|
|
Jetzt bin ich wieder zu Hause und kann testen:
also root:
Code: | /etc/init.d/dbus start |
Code: | ls -la /var/run/dbus/ | gibt mir die Meldung
Code: | drwxr-xr-x 2 root root 1024 Jan 1 09:34 .
drwxr-xr-x 5 root root 1024 Jan 1 09:34 ..
srwxrwxrwx 1 root root 0 Jan 1 09:34 system_bus_socket |
aber die Fehlermeldung bei Parole ist die Gleiche, wie vorher, der wird nicht als root gestartet. |
|
Back to top |
|
|
Schorchgrinder Tux's lil' helper
Joined: 30 Jun 2006 Posts: 82 Location: Lower Uncton
|
Posted: Fri Oct 26, 2012 5:12 pm Post subject: |
|
|
schau doch bitte mal mit rc-status
ps -lA | grep dbus
5 S 101 1501 1 0 80 0 - 5029 ep_pol ? 00:00:00 dbus-daemon
1 S 1001 2417 1 0 80 0 - 6096 poll_s ? 00:00:00 dbus-launch
1 S 1001 2418 1 0 80 0 - 5235 ep_pol ? 00:00:14 dbus-daemon
1 S 1000 2789 1 0 80 0 - 6130 poll_s ? 00:00:00 dbus-launch
1 S 1000 2790 1 0 80 0 - 4916 ep_pol ? 00:00:00 dbus-daemon _________________ AMD Athlon 1000 Mhz, RIVA TNT2/TNT2 Pro, Creative Labs SB Live, 1500 MB Arbeitsspeicher
damit läuft der Rechner unter Gentoo immer noch recht gut
AMD Athlon II X4 600e 2200 Mhz, Nvidia G210, 4GB RAM |
|
Back to top |
|
|
Gentoo-kid Tux's lil' helper
Joined: 14 Oct 2009 Posts: 85 Location: Frankfurt
|
Posted: Fri Oct 26, 2012 8:43 pm Post subject: |
|
|
nach /etc/init.d/dbus start und
dbus-launch
Code: | DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-7qMtZ5K9G2,guid=61589bfe2b312200410d9dd03c30ff20
DBUS_SESSION_BUS_PID=1523 |
habe ich:
rc-status gibt mir Code: | Runlevel: default
hdparm [ started ]
dhcpcd [ started ]
netmount [ started ]
udev-postmount [ started ]
local [ started ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed
sysfs [ started ]
udev-mount [ started ]
Dynamic Runlevel: manual
|
ps -lA | grep dbus
Code: |
5 S 103 1495 1 0 80 0 - 721 - ? 00:00:00 dbus-daemon
5 S 0 1523 1 0 80 0 - 721 - ? 00:00:00 dbus-daemon
|
|
|
Back to top |
|
|
Josef.95 Advocate
Joined: 03 Sep 2007 Posts: 4569 Location: Germany
|
Posted: Fri Oct 26, 2012 11:21 pm Post subject: |
|
|
@Gentoo-kid
Deine Ausgaben helfen hier wahrscheinlich niemanden weiter - die Anfrage war doch eher an Sindbad gerichtet. |
|
Back to top |
|
|
Sindbad Tux's lil' helper
Joined: 10 Apr 2007 Posts: 85
|
Posted: Sun Oct 28, 2012 5:50 pm Post subject: |
|
|
Nach dbus-launch wird bei mir zumindest von rc-status das selbe, wie von gentookid gezeigt.
Aber hier bekomme ich eine andere Ausgabe:
ps -lA | grep dbus Code: |
5 S 103 1628 1 0 80 0 - 721 - ? 00:00:00 dbus-daemon
5 S 0 1635 1 0 80 0 - 721 - ? 00:00:00 dbus-daemon |
|
|
Back to top |
|
|
|