View previous topic :: View next topic |
Author |
Message |
slackline Veteran
Joined: 01 Apr 2005 Posts: 1471 Location: /uk/sheffield
|
Posted: Mon Oct 08, 2012 6:58 am Post subject: Enabling Cores |
|
|
Hi,
I've an Asus Zenbook UX21e that is up and for the most part running Gentoo very nicely (a few niggles to sort, but nothing a bit of time won't sort).
One thing I've noticed though is that the output of lshw shows the following...
Code: |
id: cpu
description: CPU
product: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz
serial: To Be Filled By O.E.M.
slot: CPU 1
size: 1601MHz
capacity: 4GHz
width: 64 bits
clock: 100MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq
configuration: cores = 2
enabledcores = 1
threads = 2
|
I'm unsure why there are two cores reported for the processor, but only one is enabled?
How do I go about enabling both cores?
Under kernel configuration I've...
Code: |
Processor type and features -->
Processor family (Core 2/newer Zeon) -->
(X) Core 2/newer Zeon
|
I note here suggests the "MAKEOPTS=-j5", which I've now set, but that makes no difference to the output of lshw.
Could it be attributable to some aspect of power saving (need to check what I've enabled for things like CPU scaling in the kernel).
slack _________________ "Science is what we understand well enough to explain to a computer. Art is everything else we do." - Donald Knuth |
|
Back to top |
|
|
massimo Veteran
Joined: 22 Jun 2003 Posts: 1226
|
Posted: Mon Oct 08, 2012 7:38 am Post subject: |
|
|
What is the output of lscpu? Did you set SMT (Hyperthreading) scheduler support and Multi-core scheduler support in your kernel config? _________________ Hello 911? How are you? |
|
Back to top |
|
|
slackline Veteran
Joined: 01 Apr 2005 Posts: 1471 Location: /uk/sheffield
|
Posted: Mon Oct 08, 2012 7:04 pm Post subject: |
|
|
[quote="massimo"]What is the output of lscpu?
Various outputs...
Code: |
# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 23
Stepping: 10
CPU MHz: 2999.456
BogoMIPS: 5998.91
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 6144K
NUMA node0 CPU(s): 0,1
#
# lscpu -a -e
CPU NODE SOCKET CORE L1d:L1i:L2 ONLINE
0 0 0 0 0:0:0 yes
1 0 0 1 1:1:0 yes
#
# lscpu -a -p
# The following is the parsable format, which can be fed to other
# programs. Each different item in every column has an unique ID
# starting from zero.
# CPU,Core,Socket,Node,,L1d,L1i,L2
0,0,0,0,,0,0,0
1,1,0,0,,1,1,0
|
massimo wrote: | Did you set SMT (Hyperthreading) scheduler support and Multi-core scheduler support in your kernel config? |
Yep got both of those enabled, basically I've used the kernel posted here (by someone else who thankfully did a lot of the hardwork on sussing out kernel options for this laptop).
Am I perhaps mis-interpreting the output from lshw and both cores are enabled? _________________ "Science is what we understand well enough to explain to a computer. Art is everything else we do." - Donald Knuth |
|
Back to top |
|
|
krinn Watchman
Joined: 02 May 2003 Posts: 7470
|
Posted: Mon Oct 08, 2012 7:58 pm Post subject: |
|
|
why using such program with unclear output ? You wish see how many cores are enable, ask the kernel !
Code: | cat /proc/cpuinfo | grep processor
processor : 0
processor : 1
processor : 2
processor : 3
processor : 4
processor : 5
processor : 6
processor : 7
|
|
|
Back to top |
|
|
BillWho Veteran
Joined: 03 Mar 2012 Posts: 1600 Location: US
|
Posted: Mon Oct 08, 2012 8:57 pm Post subject: |
|
|
slack---line,
I have a laptop Intel(R) Core(TM) i3-2350M and it shows enabledcores=1
This is the first time I've looked at the output of lshw - it must be a shortcoming of the application. I use conky and it shows four processors along with /proc/cpuinfo.
Code: | laptop bill # grep processor /proc/cpuinfo
processor : 0
processor : 1
processor : 2
processor : 3
|
_________________ Good luck
Since installing gentoo, my life has become one long emerge |
|
Back to top |
|
|
slackline Veteran
Joined: 01 Apr 2005 Posts: 1471 Location: /uk/sheffield
|
Posted: Tue Oct 09, 2012 10:54 pm Post subject: |
|
|
krinn wrote: | why using such program with unclear output ? |
Because I was intending on writing up a HowTo on installing Gentoo on this particular laptop and figured a description of all of the hardware would be useful as a starting point and lshw provides that in nice html output that embeds in a wiki easily (from what I've read these ship with two variants on the wireless front so I wanted to make it crystal clear which I had for potential readers).
Checking as you've suggested...
Code: |
# grep /proc/cpuinfo processor
processor : 0
processor : 1
|
So that looks more promising, although why would a lower rated processor (BillWho's i3-2350M compared to my i5-2467M) have four processors showing when all the entries here show laptop i5's as having two cores?????
Also, whilst /proc/cpuinfo tells you whats there, is it telling you what is actually enabled as the output of lshw is purportedly doing? Two processors, each with two cores each according to the full output from /proc/cpuinfo but are these enabled (i.e. four cores total)? lshw suggests not, any other way of checking?
Code: |
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 CPU E8400 @ 3.00GHz
stepping : 10
cpu MHz : 2999.456
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni monitor tm2 ssse3 lahf_lm dtherm
bogomips : 5998.91
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 CPU E8400 @ 3.00GHz
stepping : 10
cpu MHz : 2999.456
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
bogomips : 5998.91
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
|
EDIT : It appears /proc/cpuinfo and lshw are reporting different processors. From lshw...
Code: |
Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz |
...from /proc/cpuinfo...
Code: |
Intel(R) Core(TM)2 CPU E8400 @ 3.00GHz
|
_________________ "Science is what we understand well enough to explain to a computer. Art is everything else we do." - Donald Knuth |
|
Back to top |
|
|
wrc1944 Advocate
Joined: 15 Aug 2002 Posts: 3435 Location: Gainesville, Florida
|
Posted: Tue Oct 09, 2012 11:19 pm Post subject: |
|
|
Make sure these options are also enabled in your kernel config.
CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_NR_CPUS (enter your preferred number) _________________ Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.36-r7, gcc-13.2.1_p20230304
kernel-6.8.4 USE=experimental python3_11 |
|
Back to top |
|
|
krinn Watchman
Joined: 02 May 2003 Posts: 7470
|
Posted: Tue Oct 09, 2012 11:30 pm Post subject: |
|
|
Because your flags "ht" mean hyperthreading, intel tech, double the cores of your cpu.
So, again asking kernel
you should see the ht flags in your, well, flags
you should see number of processors like i have gave already
and your real number of cores with "cpu cores"
So you should get
Quote: | flagsprocessor : 6
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz
stepping : 5
microcode : 0xf
cpu MHz : 3073.671
cache size : 8192 KB
physical id : 0
siblings : 8
core id : 2
cpu cores : 4
apicid : 5
initial apicid : 5
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dtherm tpr_shadow vnmi flexpriority ept vpid
bogomips : 6147.34
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
|
and the kernel setting : CONFIG_X86_HT |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|