Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
kde-base/system-config-printer-kde-4.9.2 emake failed
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Portage & Programming
View previous topic :: View next topic  
Author Message
Salem
Tux's lil' helper
Tux's lil' helper


Joined: 10 Nov 2002
Posts: 103
Location: Bayreuth, Germany

PostPosted: Fri Oct 05, 2012 1:30 pm    Post subject: kde-base/system-config-printer-kde-4.9.2 emake failed Reply with quote

Hi,

i can't upgrade my system because of this error:

Code:
make: *** No rule to make target 'install'. Stop.


Any ideas?

Thanks
_________________
Salem
Back to top
View user's profile Send private message
Salem
Tux's lil' helper
Tux's lil' helper


Joined: 10 Nov 2002
Posts: 103
Location: Bayreuth, Germany

PostPosted: Sat Oct 06, 2012 12:52 pm    Post subject: Reply with quote

I tried anything but the problem is still there. I have the same problem with the stable version of this package. I tried to recompile python and setting it to a different version, but doesn't help :-(

Here the full log:
Code:
>>> Emerging (1 of 14) kde-base/system-config-printer-kde-4.9.2
 * kdeadmin-4.9.2.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ...                                                                                                                                                                                                                                                           [ ok ]
>>> Unpacking source...
 * Unpacking parts of kdeadmin-4.9.2.tar.xz to /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work ...
tar extract command failed at least partially - continuing anyway                                                                                                                                                                                                                                                       [ ok ]
>>> Source unpacked in /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work
>>> Preparing source in /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2 ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2 ...
>>> Working in BUILD_DIR: "/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build"
cmake --no-warn-unused-cli -C /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build/gentoo_common_config.cmake -G Unix Makefiles -DCMAKE_INSTALL_PREFIX=/usr -DKDE4_BUILD_TESTS=OFF -DCMAKE_INSTALL_PREFIX=/usr -DSYSCONF_INSTALL_DIR=/etc -DCMAKE_BUILD_TYPE=Gentoo -DCMAKE_INSTALL_DO_STRIP=OFF -DCMAKE_USER_MAKE_RULES_OVERRIDE=/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build/gentoo_rules.cmake  /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2
Not searching for unused variables given on the command line.
loading initial cache file /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build/gentoo_common_config.cmake
-- The C compiler identification is GNU 4.5.4
-- The CXX compiler identification is GNU 4.5.4
-- Check for working C compiler: /usr/bin/x86_64-pc-linux-gnu-gcc
-- Check for working C compiler: /usr/bin/x86_64-pc-linux-gnu-gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/x86_64-pc-linux-gnu-g++
-- Check for working CXX compiler: /usr/bin/x86_64-pc-linux-gnu-g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Looking for Q_WS_X11
-- Looking for Q_WS_X11 - found
-- Looking for Q_WS_WIN
-- Looking for Q_WS_WIN - not found.
-- Looking for Q_WS_QWS
-- Looking for Q_WS_QWS - not found.
-- Looking for Q_WS_MAC
-- Looking for Q_WS_MAC - not found.
-- Found Qt-Version 4.8.3 (using /usr/bin/qmake)
-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so;/usr/lib64/libXft.so;/usr/lib64/libXau.so;/usr/lib64/libXdmcp.so;/usr/lib64/libXpm.so
-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so;/usr/lib64/libXft.so;/usr/lib64/libXau.so;/usr/lib64/libXdmcp.so;/usr/lib64/libXpm.so - found
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Looking for connect
-- Looking for connect - found
-- Looking for remove
-- Looking for remove - found
-- Looking for shmat
-- Looking for shmat - found
-- Looking for IceConnectionNumber in ICE
-- Looking for IceConnectionNumber in ICE - found
-- Found X11: /usr/lib64/libX11.so
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found.
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE 
-- Found OpenSSL: /usr/lib64/libssl.so
-- Looking for _POSIX_TIMERS
-- Looking for _POSIX_TIMERS - found
-- Found Automoc4: /usr/bin/automoc4
-- Found Perl: /usr/bin/perl (found version "5.12.4")
-- Found Phonon: /usr/include
-- Performing Test _OFFT_IS_64BIT
-- Performing Test _OFFT_IS_64BIT - Success
-- Performing Test HAVE_FPIE_SUPPORT
-- Performing Test HAVE_FPIE_SUPPORT - Success
-- Performing Test __KDE_HAVE_W_OVERLOADED_VIRTUAL
-- Performing Test __KDE_HAVE_W_OVERLOADED_VIRTUAL - Success
-- Performing Test __KDE_HAVE_GCC_VISIBILITY
-- Performing Test __KDE_HAVE_GCC_VISIBILITY - Success
-- Found KDE 4.9 include dir: /usr/include
-- Found KDE 4.9 library dir: /usr/lib64
-- Found the KDE4 kconfig_compiler preprocessor: /usr/bin/kconfig_compiler
-- Found automoc4: /usr/bin/automoc4
-- Found PythonInterp: /usr/bin/python (found version "2.7.3")
-- Found Python executable: /usr/bin/python
-- Found Python version: 2.7.3
-- Found Python library: /usr/lib64/libpython2.7.so
-- Found SIP version: 4.14
-- Found PyQt4 version: 4.9.5
-- Found PyKDE4 version 4.9.2 /usr/share/sip/PyKDE4

-----------------------------------------------------------------------------
-- The following OPTIONAL packages could NOT be located on your system.
-- Consider installing them to enable more features from this software.
-----------------------------------------------------------------------------
   * PyCups  <http://cyberelk.net/tim/software/pycups/>
     PyCups was not found.  It is needed by system-config-printer-kde to run.  (Use -DINSTALL_SYSTEM_CONFIG_PRINTER=TRUE to install anyway)
   * system-config-printer  <http://cyberelk.net/tim/software/system-config-printer/>
     system-config-printer was not found.  Some of its modules (cupshelpers modules, config.py, smburi.py, debug.py and ppdippstr.py) are required by system-config-printer-kde.

-----------------------------------------------------------------------------

-- <<< Gentoo configuration >>>
Build type      Gentoo
Install path    /usr
Compiler flags:
C               -march=core2 -msse4 -mcx16 -mpopcnt -msahf -O2 -pipe  -Wno-long-long -std=iso9899:1990 -Wundef -Wcast-align -Werror-implicit-function-declaration -Wchar-subscripts -Wall -W -Wpointer-arith -Wwrite-strings -Wformat-security -Wmissing-format-attribute -fno-common
C++             -march=core2 -msse4 -mcx16 -mpopcnt -msahf -O2 -pipe  -Wnon-virtual-dtor -Wno-long-long -Wundef -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -Wformat-security -fno-exceptions -DQT_NO_EXCEPTIONS -fno-check-new -fno-common -Woverloaded-virtual -fno-threadsafe-statics -fvisibility=hidden -Werror=return-type -fvisibility-inlines-hidden
Linker flags:
Executable      -Wl,--enable-new-dtags  -Wl,-O1 -Wl,--as-needed
Module          -Wl,--enable-new-dtags -Wl,--fatal-warnings -Wl,--no-undefined -lc  -Wl,-O1 -Wl,--as-needed
Shared          -Wl,--enable-new-dtags -Wl,--fatal-warnings -Wl,--no-undefined -lc  -Wl,-O1 -Wl,--as-needed

-- Configuring done
-- Generating done
-- Build files have been written to: /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build
>>> Source configured.
>>> Compiling source in /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2 ...
>>> Working in BUILD_DIR: "/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build"
make VERBOSE=1
/usr/bin/cmake -H/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2 -B/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build --check-build-system CMakeFiles/Makefile.cmake 0
/usr/bin/cmake -E cmake_progress_start /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build/CMakeFiles /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build/CMakeFiles/progress.marks
make -f CMakeFiles/Makefile2 all
make[1]: Entering directory `/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build'
/usr/bin/cmake -E cmake_progress_start /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build/CMakeFiles 0
>>> Source compiled.
>>> Test phase [not enabled]: kde-base/system-config-printer-kde-4.9.2

>>> Install system-config-printer-kde-4.9.2 into /var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/image/ category kde-base
>>> Working in BUILD_DIR: "/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build"
make DESTDIR=/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/image/ install
make: *** No rule to make target `install'.  Stop.
 * ERROR: kde-base/system-config-printer-kde-4.9.2 failed (install phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=kde-base/system-config-printer-kde-4.9.2'`,
 * the complete build log and the output of `emerge -pqv '=kde-base/system-config-printer-kde-4.9.2'`.
 * The complete build log is located at '/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/temp/environment'.
 * Working directory: '/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build'
 * S: '/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2'

>>> Failed to emerge kde-base/system-config-printer-kde-4.9.2, Log file:

>>>  '/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/temp/build.log'

 * Messages for package kde-base/system-config-printer-kde-4.9.2:

 * ERROR: kde-base/system-config-printer-kde-4.9.2 failed (install phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=kde-base/system-config-printer-kde-4.9.2'`,
 * the complete build log and the output of `emerge -pqv '=kde-base/system-config-printer-kde-4.9.2'`.
 * The complete build log is located at '/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/temp/environment'.
 * Working directory: '/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2_build'
 * S: '/var/tmp/portage/kde-base/system-config-printer-kde-4.9.2/work/system-config-printer-kde-4.9.2'


Thanks
_________________
Salem
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6196

PostPosted: Sat Oct 06, 2012 3:53 pm    Post subject: Reply with quote

:roll:
Salem wrote:
Code:
-----------------------------------------------------------------------------
-- The following OPTIONAL packages could NOT be located on your system.
-- Consider installing them to enable more features from this software.
-----------------------------------------------------------------------------
   * PyCups  <http://cyberelk.net/tim/software/pycups/>
     PyCups was not found.  It is needed by system-config-printer-kde to run.  (Use -DINSTALL_SYSTEM_CONFIG_PRINTER=TRUE to install anyway)
   * system-config-printer  <http://cyberelk.net/tim/software/system-config-printer/>
     system-config-printer was not found.  Some of its modules (cupshelpers modules, config.py, smburi.py, debug.py and ppdippstr.py) are required by system-config-printer-kde.

-----------------------------------------------------------------------------

After sip/pyqt4 upgrade most (if not all) packages depending on it need a rebuild (and ebuild does print a warning about it).
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Portage & Programming All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum