Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
При загрузке с LiveCD не обнаруживаются разделы HDD
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Russian
View previous topic :: View next topic  
Author Message
borskiy
n00b
n00b


Joined: 19 Jul 2012
Posts: 8
Location: д.Редькино, Нижегородская губерния, РФ

PostPosted: Thu Jul 19, 2012 6:04 am    Post subject: При загрузке с LiveCD не обнаруживаются разделы HDD Reply with quote

Здравствуйте.
Такая проблема:
Есть недобук Aspire one. На его штатный SSD (8ГБ) всё устанавливвалось замечательно. Решил поменять винт на более ёмкий и быстрый, ради чего раскурочил SSD Corsair F40. Подпаял, всё отлично детектится и в биосе, и fdisk'ом.
Разбивка на разделы также прошла "на ура". Но на этом моё радужное настроение и закончилось. В /dev разделы не появились ни сразу, ни после перезагрузки. Соответственно, ни создать ФС, ни смонтировать их я не могу. Создал файловые системы из-под загруженной с внешнего винта операционки, снова загрузился с ливСД, разделы не монтируются. Гляжу в /dev - то же самое.

/dev
    0:0:0:0
    2:0:0:0
    block
    bsg
    btrfs-control
    bus
    char
    console
    dac960_gam
    device-mapper
    discover
    disk
    err
    etherd
    event0
    event1
    event2
    event3
    fb0
    fd
    flush
    full
    fuse
    gpmctl
    hiddev0
    hidraw0
    hidraw1
    initctl
    input
    interfaces
    kmem
    kmsg
    log
    loop-control
    loop0
    loop1
    loop2
    loop3
    loop4
    loop5
    loop6
    loop7
    mapper
    mcelog
    md
    md126
    md127
    megadev0
    mem
    mice
    mmcblk0
    mouse
    mouse0
    mouse1
    mouse2
    mpt2ctl
    net
    null
    port
    ppp
    psaux
    ptmx
    pts
    ram0
    ram1
    ram10
    ram11
    ram12
    ram13
    ram14
    ram15
    ram2
    ram3
    ram4
    ram5
    ram6
    ram7
    ram8
    ram9
    random
    revalidate
    rfkill
    rtc
    sda
    sdb
    sdb1
    sg0
    sg1
    shm
    snd
    stderr
    stdin
    stdout
    tgt
    tty
    tty0
    tty1
    tty10
    tty11
    tty12
    tty13
    tty14
    tty15
    tty16
    tty17
    tty18
    tty19
    tty2
    tty20
    tty21
    tty22
    tty23
    tty24
    tty25
    tty26
    tty27
    tty28
    tty29
    tty3
    tty30
    tty31
    tty32
    tty33
    tty34
    tty35
    tty36
    tty37
    tty38
    tty39
    tty4
    tty40
    tty41
    tty42
    tty43
    tty44
    tty45
    tty46
    tty47
    tty48
    tty49
    tty5
    tty50
    tty51
    tty52
    tty53
    tty54
    tty55
    tty56
    tty57
    tty58
    tty59
    tty6
    tty60
    tty61
    tty62
    tty63
    tty7
    tty8
    tty9
    ttyS0
    ttyS1
    ttyS2
    ttyS3
    urandom
    usb
    vcs
    vcs1
    vcs10
    vcs11
    vcs12
    vcs2
    vcs3
    vcs4
    vcs5
    vcs6
    vcs7
    vcs8
    vcs9
    vcsa
    vcsa1
    vcsa10
    vcsa11
    vcsa12
    vcsa2
    vcsa3
    vcsa4
    vcsa5
    vcsa6
    vcsa7
    vcsa8
    vcsa9
    vga_arbiter
    zero


dmesg
    Linux version 3.2.21-gentoo (root@poseidon) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 SMP Tue Jul 10 16:46:38 UTC 2012
    Atom PSE erratum detected, BIOS microcode update recommended
    Disabled fast string operations
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000005f376000 (usable)
    BIOS-e820: 000000005f376000 - 000000005f3bf000 (reserved)
    BIOS-e820: 000000005f3bf000 - 000000005f46d000 (usable)
    BIOS-e820: 000000005f46d000 - 000000005f4bf000 (ACPI NVS)
    BIOS-e820: 000000005f4bf000 - 000000005f4f0000 (usable)
    BIOS-e820: 000000005f4f0000 - 000000005f4ff000 (ACPI data)
    BIOS-e820: 000000005f4ff000 - 000000005f500000 (usable)
    BIOS-e820: 000000005f500000 - 0000000060000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection missing in CPU!
    DMI 2.4 present.
    DMI: Acer AOA110/ , BIOS v0.3309 10/06/2008
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x5f500 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-C7FFF write-protect
    C8000-EFFFF uncachable
    F0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 0FFFE0000 mask 0FFFE0000 write-protect
    1 base 0FFFC0000 mask 0FFFE0000 uncachable
    2 base 000000000 mask 0C0000000 write-back
    3 base 040000000 mask 0E0000000 write-back
    4 base 05F800000 mask 0FF800000 uncachable
    5 base 05F600000 mask 0FFE00000 uncachable
    6 base 05F500000 mask 0FFF00000 uncachable
    7 base 000000000 mask 0FFFE0000 uncachable
    Warning only 895MB will be used.
    Use a HIGHMEM enabled kernel.
    initial memory mapped : 0 - 01800000
    Base memory trampoline at [c009e000] 9e000 size 4096
    init_memory_mapping: 0000000000000000-0000000037f13000
    0000000000 - 0037f13000 page 4k
    kernel direct mapping tables up to 37f13000 @ 171d000-1800000
    RAMDISK: 5ee1f000 - 5f375000
    Allocated new RAMDISK: 379bd000 - 37f12d65
    Move RAMDISK from 000000005ee1f000 - 000000005f374d64 to 379bd000 - 37f12d64
    ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
    ACPI: XSDT 5f4fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
    ACPI: FACP 5f4fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
    ACPI: DSDT 5f4f2000 05DE6 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    ACPI: FACS 5f488000 00040
    ACPI: SSDT 5f4fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
    ACPI: HPET 5f4fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    ACPI: APIC 5f4fa000 00068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
    ACPI: MCFG 5f4f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    ACPI: ASF! 5f4f8000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
    ACPI: SLIC 5f4f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    ACPI: BOOT 5f4f0000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    ACPI: Local APIC address 0xfee00000
    895MB LOWMEM available.
    mapped low ram: 0 - 37f13000
    low ram: 0 - 37f13000
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    Normal 0x00001000 -> 0x00037f13
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x00037f13
    On node 0 totalpages: 229026
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3951 pages, LIFO batch:0
    Normal zone: 1759 pages used for memmap
    Normal zone: 223284 pages, LIFO batch:31
    Using APIC driver default
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    Allocating PCI resources starting at 60000000 (gap: 60000000:80000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 12 pages/cpu @f729f000 s25216 r0 d23936 u49152
    pcpu-alloc: s25216 r0 d23936 u49152 alloc=12*4096
    pcpu-alloc: [0] 0 [0] 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227235
    Kernel command line: initrd=/ubninit root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot vga=791 BOOT_IMAGE=/ubnkern
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Initializing CPU#0
    Memory: 896324k/916556k available (3441k kernel code, 19780k reserved, 1294k data, 396k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
    vmalloc : 0xf8713000 - 0xfff13000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf7f13000 ( 895 MB)
    .init : 0xc14a0000 - 0xc1503000 ( 396 kB)
    .data : 0xc135c47f - 0xc149ff80 (1294 kB)
    .text : 0xc1000000 - 0xc135c47f (3441 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    Hierarchical RCU implementation.
    NR_IRQS:2304 nr_irqs:512 16
    CPU 0 irqstacks, hard=f6c06000 soft=f6c08000
    Console: colour dummy device 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1596.002 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.00 BogoMIPS (lpj=15960020)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    Atom PSE erratum detected, BIOS microcode update recommended
    Disabled fast string operations
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 5 MCE banks
    CPU0: Thermal monitoring enabled (TM1)
    using mwait in idle threads.
    ACPI: Core revision 20110623
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
    Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
    ... version: 3
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    CPU 1 irqstacks, hard=f6c8e000 soft=f6c90000
    Booting Node 0, Processors #1 Ok.
    smpboot cpu 1: start_ip = 9e000
    Initializing CPU#1
    Atom PSE erratum detected, BIOS microcode update recommended
    Disabled fast string operations
    Brought up 2 CPUs
    Total of 2 processors activated (6383.98 BogoMIPS).
    devtmpfs: initialized
    Acer Aspire One A110 series board detected. Selecting KBD-method for reboot.
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    dca service started, version 1.12.1
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: Added _OSI(Module Device)
    ACPI: Added _OSI(Processor Device)
    ACPI: Added _OSI(3.0 _SCP Extensions)
    ACPI: Added _OSI(Processor Aggregator Device)
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 5f380c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
    ACPI: SSDT 5f37fe10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
    ACPI: SSDT 5f380f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
    ACPI: SSDT 5f37ef10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
    ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c3c680), AE_ALREADY_EXISTS (20110623/psparse-536)
    ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff]
    pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
    pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
    pci 0000:00:02.0: reg 10: [mem 0x78480000-0x784fffff]
    pci 0000:00:02.0: reg 14: [io 0x60c0-0x60c7]
    pci 0000:00:02.0: reg 18: [mem 0x60000000-0x6fffffff pref]
    pci 0000:00:02.0: reg 1c: [mem 0x78500000-0x7853ffff]
    pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
    pci 0000:00:02.1: reg 10: [mem 0x78400000-0x7847ffff]
    pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
    pci 0000:00:1b.0: reg 10: [mem 0x78540000-0x78543fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
    pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
    pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
    pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
    pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
    pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
    pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
    pci 0000:00:1d.3: reg 20: [io 0x6020-0x603f]
    pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
    pci 0000:00:1d.7: reg 10: [mem 0x78544400-0x785447ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
    pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
    pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
    pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
    pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
    pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
    pci 0000:00:1f.2: reg 20: [io 0x60a0-0x60af]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
    pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
    pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:1c.0: bridge window [mem 0x77300000-0x783fffff]
    pci 0000:00:1c.0: bridge window [mem 0x70000000-0x70ffffff 64bit pref]
    pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
    pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
    pci 0000:02:00.0: reg 18: [mem 0x71010000-0x71010fff 64bit pref]
    pci 0000:02:00.0: reg 20: [mem 0x71000000-0x7100ffff 64bit pref]
    pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
    pci 0000:00:1c.1: bridge window [mem 0x76300000-0x772fffff]
    pci 0000:00:1c.1: bridge window [mem 0x71000000-0x720fffff 64bit pref]
    pci 0000:03:00.0: [168c:001c] type 0 class 0x000200
    pci 0000:03:00.0: reg 10: [mem 0x75200000-0x7520ffff 64bit]
    pci 0000:00:1c.2: PCI bridge to [bus 03-03]
    pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
    pci 0000:00:1c.2: bridge window [mem 0x75200000-0x762fffff]
    pci 0000:00:1c.2: bridge window [mem 0x72100000-0x730fffff 64bit pref]
    pci 0000:04:00.0: [197b:2382] type 0 class 0x000880
    pci 0000:04:00.0: reg 10: [mem 0x74100300-0x741003ff]
    pci 0000:04:00.0: reg 30: [mem 0xffff8000-0xffffffff pref]
    pci 0000:04:00.2: [197b:2381] type 0 class 0x000805
    pci 0000:04:00.2: reg 10: [mem 0x74100200-0x741002ff]
    pci 0000:04:00.3: [197b:2383] type 0 class 0x000880
    pci 0000:04:00.3: reg 10: [mem 0x74100100-0x741001ff]
    pci 0000:04:00.4: [197b:2384] type 0 class 0x000880
    pci 0000:04:00.4: reg 10: [mem 0x74100000-0x741000ff]
    pci 0000:00:1c.3: PCI bridge to [bus 04-04]
    pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    pci 0000:00:1c.3: bridge window [mem 0x74100000-0x751fffff]
    pci 0000:00:1c.3: bridge window [mem 0x73100000-0x740fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x60000000-0xfebfffff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
    ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c3c680), AE_ALREADY_EXISTS (20110623/psparse-536)
    pci0000:00: Unable to request _OSC control (_OSC support mask: 0x09)
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    vgaarb: bridge control possible 0000:00:02.0
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    reserve RAM buffer: 000000005f376000 - 000000005fffffff
    reserve RAM buffer: 000000005f46d000 - 000000005fffffff
    reserve RAM buffer: 000000005f4f0000 - 000000005fffffff
    reserve RAM buffer: 000000005f500000 - 000000005fffffff
    Switching to clocksource hpet
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: [bus 00-ff]
    pnp 00:00: [io 0x0000-0x0cf7 window]
    pnp 00:00: [io 0x0cf8-0x0cff]
    pnp 00:00: [io 0x0d00-0xffff window]
    pnp 00:00: [mem 0x000a0000-0x000bffff window]
    pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    pnp 00:00: [mem 0x000cc000-0x000cffff window]
    pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    pnp 00:00: [mem 0x000dc000-0x000dffff window]
    pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    pnp 00:00: [mem 0x000ec000-0x000effff window]
    pnp 00:00: [mem 0x000f0000-0x000fffff window]
    pnp 00:00: [mem 0x60000000-0xfebfffff window]
    pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    pnp 00:01: [io 0x002e-0x002f]
    pnp 00:01: [io 0x0068-0x006f]
    pnp 00:01: [io 0x0200-0x020f]
    pnp 00:01: [io 0x164e-0x164f]
    pnp 00:01: [io 0x0061]
    pnp 00:01: [io 0x0070]
    pnp 00:01: [io 0x0080]
    pnp 00:01: [io 0x0092]
    pnp 00:01: [io 0x00b2-0x00b3]
    pnp 00:01: [io 0x0063]
    pnp 00:01: [io 0x0065]
    pnp 00:01: [io 0x0067]
    pnp 00:01: [io 0x0600-0x060f]
    pnp 00:01: [io 0x0610]
    pnp 00:01: [io 0x0800-0x080f]
    pnp 00:01: [io 0x0400-0x047f]
    pnp 00:01: [io 0x0500-0x053f]
    pnp 00:01: [mem 0xe0000000-0xefffffff]
    pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    pnp 00:01: [mem 0xfed14000-0xfed17fff]
    pnp 00:01: [mem 0xfed18000-0xfed18fff]
    pnp 00:01: [mem 0xfed19000-0xfed19fff]
    pnp 00:01: [mem 0xfec00000-0xfec00fff]
    pnp 00:01: [mem 0xfee00000-0xfee00fff]
    pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 7 [io 0x1000-0x1fff]
    system 00:01: [io 0x0200-0x020f] has been reserved
    system 00:01: [io 0x0600-0x060f] has been reserved
    system 00:01: [io 0x0610] has been reserved
    system 00:01: [io 0x0800-0x080f] has been reserved
    system 00:01: [io 0x0400-0x047f] has been reserved
    system 00:01: [io 0x0500-0x053f] has been reserved
    system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:02: [io 0x0000-0x001f]
    pnp 00:02: [io 0x0081-0x0091]
    pnp 00:02: [io 0x0093-0x009f]
    pnp 00:02: [io 0x00c0-0x00df]
    pnp 00:02: [dma 4]
    pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    pnp 00:03: [io 0x0070-0x0077]
    pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    pnp 00:04: [irq 0 disabled]
    pnp 00:04: [irq 8]
    pnp 00:04: [mem 0xfed00000-0xfed003ff]
    pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    pnp 00:05: [io 0x00f0]
    pnp 00:05: [irq 13]
    pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    pnp 00:06: [mem 0xff800000-0xffffffff]
    pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
    pnp 00:07: [io 0x0060]
    pnp 00:07: [io 0x0064]
    pnp 00:07: [irq 1]
    pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    pnp 00:08: [irq 12]
    pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
    pnp: PnP ACPI: found 9 devices
    ACPI: ACPI bus type pnp unregistered
    pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    pci 0000:04:00.0: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
    PCI: max bus depth: 1 pci_try_num: 2
    pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:1c.0: bridge window [mem 0x77300000-0x783fffff]
    pci 0000:00:1c.0: bridge window [mem 0x70000000-0x70ffffff 64bit pref]
    pci 0000:02:00.0: BAR 6: assigned [mem 0x71020000-0x7103ffff pref]
    pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
    pci 0000:00:1c.1: bridge window [mem 0x76300000-0x772fffff]
    pci 0000:00:1c.1: bridge window [mem 0x71000000-0x720fffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 03-03]
    pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
    pci 0000:00:1c.2: bridge window [mem 0x75200000-0x762fffff]
    pci 0000:00:1c.2: bridge window [mem 0x72100000-0x730fffff 64bit pref]
    pci 0000:04:00.0: BAR 6: assigned [mem 0x73100000-0x73107fff pref]
    pci 0000:00:1c.3: PCI bridge to [bus 04-04]
    pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    pci 0000:00:1c.3: bridge window [mem 0x74100000-0x751fffff]
    pci 0000:00:1c.3: bridge window [mem 0x73100000-0x740fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 05-05]
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x60000000-0xfebfffff]
    pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    pci_bus 0000:01: resource 1 [mem 0x77300000-0x783fffff]
    pci_bus 0000:01: resource 2 [mem 0x70000000-0x70ffffff 64bit pref]
    pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
    pci_bus 0000:02: resource 1 [mem 0x76300000-0x772fffff]
    pci_bus 0000:02: resource 2 [mem 0x71000000-0x720fffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    pci_bus 0000:03: resource 1 [mem 0x75200000-0x762fffff]
    pci_bus 0000:03: resource 2 [mem 0x72100000-0x730fffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
    pci_bus 0000:04: resource 1 [mem 0x74100000-0x751fffff]
    pci_bus 0000:04: resource 2 [mem 0x73100000-0x740fffff 64bit pref]
    pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:05: resource 7 [mem 0x60000000-0xfebfffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    pci 0000:00:02.0: Boot video device
    pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1d.0: PCI INT A disabled
    pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1d.1: PCI INT B disabled
    pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1d.2: PCI INT C disabled
    pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1d.3: PCI INT D disabled
    pci 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1d.7: PCI INT A disabled
    PCI: CLS 0 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    Freeing initrd memory: 5464k freed
    Simple Boot Flag value 0x5 read from CMOS RAM was invalid
    Simple Boot Flag at 0x44 set to 0x1
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    squashfs: version 4.0 (2009/01/31) Phillip Lougher
    NTFS driver 2.1.30 [Flags: R/O].
    SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    SGI XFS Quota Management subsystem
    msgmni has been set to 1761
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered (default)
    pcieport 0000:00:1c.0: setting latency timer to 64
    pcieport 0000:00:1c.1: setting latency timer to 64
    pcieport 0000:00:1c.2: setting latency timer to 64
    pcieport 0000:00:1c.3: setting latency timer to 64
    Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    intel_rng: FWH not detected
    Linux agpgart interface v0.103
    vesafb: mode is 800x600x32, linelength=3200, pages=3
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    vesafb: framebuffer at 0x60000000, mapped to 0xf8780000, using 3750k, total 7872k
    Console: switching to colour frame buffer device 100x37
    fb0: VESA VGA frame buffer device
    ioatdma: Intel(R) QuickData Technology Driver 4.00
    brd: module loaded
    loop: module loaded
    Loading iSCSI transport class v2.0-870.
    iscsi: registered transport (tcp)
    SCSI Media Changer driver v0.25
    Atheros(R) L2 Ethernet Driver - version 2.2.3
    Copyright (c) 2007 Atheros Corporation.
    jme: JMicron JMC2XX ethernet driver version 1.0.8
    aoe: AoE v47 initialised.
    i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
    i8042: Warning: Keylock active
    i8042: Detected active multiplexing controller, rev 1.1
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mousedev: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 396k freed
    Write protecting the kernel text: 3444k
    Write protecting the kernel read-only data: 1112k
    libata version 3.00 loaded.
    Refined TSC clocksource calibration: 1595.999 MHz.
    Switching to clocksource tsc
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    ata_piix 0000:00:1f.2: version 2.13
    ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    ata_piix 0000:00:1f.2: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
    ata1.00: ATA-8: Corsair CSSD-F40GB2, 2.0, max UDMA/133
    ata1.00: 78161328 sectors, multi 1: LBA48 NCQ (depth 0/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F40 2.0 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 78161328 512-byte logical blocks: (40.0 GB/37.2 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input1
    scsi: <fdomain> Detection failed (no card)
    GDT-HA: Storage RAID Controller Driver. Version: 3.05
    Fusion MPT base driver 3.04.20
    Copyright (c) 1999-2008 LSI Corporation
    Fusion MPT SPI Host driver 3.04.20
    Fusion MPT FC Host driver 3.04.20
    Fusion MPT SAS Host driver 3.04.20
    3ware Storage Controller device driver for Linux v1.26.02.003.
    3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
    Compaq SMART2 Driver (v 2.6.0)
    HP CISS Driver (v 3.6.26)
    Adaptec aacraid driver 1.1-7[28000]-ms
    megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
    megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
    megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
    qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
    Emulex LightPulse Fibre Channel SCSI driver 8.3.27
    Copyright(c) 2004-2009 Emulex. All rights reserved.
    aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
    mpt2sas version 10.100.00.00 loaded
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: using broken periodic workaround
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 16, io mem 0x78544400
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 3.2.21-gentoo ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 3.2.21-gentoo uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 3.2.21-gentoo uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 3.2.21-gentoo uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
    usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 3.2.21-gentoo uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.3
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    sl811: driver sl811-hcd, 19 May 2005
    usb 1-3: new high-speed USB device number 3 using ehci_hcd
    usb 1-3: New USB device found, idVendor=13fe, idProduct=3600
    usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    usb 1-3: Product: silicon-power
    usb 1-3: Manufacturer:
    usb 1-3: SerialNumber: 10101930E6AA1F0002CB01FB
    usb-storage 1-3:1.0: Quirks match for vid 13fe pid 3600: 4000
    scsi2 : usb-storage 1-3:1.0
    usb 1-5: new high-speed USB device number 4 using ehci_hcd
    usb 1-5: New USB device found, idVendor=0c45, idProduct=62c0
    usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
    usb 1-5: Product: USB 2.0 Camera
    usb 1-5: Manufacturer: Sonix Technology Co., Ltd.
    usb 2-2: new full-speed USB device number 2 using uhci_hcd
    usb 2-2: New USB device found, idVendor=09da, idProduct=054f
    usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: USB Device
    usb 2-2: Manufacturer: A4TECH
    input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
    generic-usb 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-2/input0
    input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
    generic-usb 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-2/input1
    scsi 2:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    sd 2:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 03 41 00 00
    sd 2:0:0:0: [sdb] No Caching mode page present
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sd 2:0:0:0: [sdb] No Caching mode page present
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 2:0:0:0: [sdb] No Caching mode page present
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    md: raid0 personality registered for level 0
    md: raid1 personality registered for level 1
    raid6: int32x1 175 MB/s
    raid6: int32x2 258 MB/s
    raid6: int32x4 280 MB/s
    raid6: int32x8 303 MB/s
    raid6: mmxx1 360 MB/s
    raid6: mmxx2 724 MB/s
    raid6: sse1x1 296 MB/s
    raid6: sse1x2 523 MB/s
    raid6: sse2x1 503 MB/s
    raid6: sse2x2 944 MB/s
    raid6: using algorithm sse2x2 (944 MB/s)
    async_tx: api initialized (async)
    xor: automatically using best checksumming function: pIII_sse
    pIII_sse : 4877.600 MB/sec
    xor: using function: pIII_sse (4877.600 MB/sec)
    md: raid6 personality registered for level 6
    md: raid5 personality registered for level 5
    md: raid4 personality registered for level 4
    md: raid10 personality registered for level 10
    Btrfs loaded
    JFS: nTxBlock = 7048, nTxLock = 56386
    fuse init (API version 7.17)
    e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
    e1000: Copyright (c) 1999-2006 Intel Corporation.
    mount: sending ioctl 5310 to a partition!
    mount: sending ioctl 5310 to a partition!
    mount: sending ioctl 5310 to a partition!
    mount: sending ioctl 5310 to a partition!
    mount: sending ioctl 5310 to a partition!
    mount: sending ioctl 5310 to a partition!
    mount: sending ioctl 5310 to a partition!
    mount: sending ioctl 5310 to a partition!
    mount: sending ioctl 5395 to a partition!
    mount: sending ioctl 5395 to a partition!
    UDF-fs: warning (device sda2): udf_fill_super: No partition found (1)
    REISERFS (device sda3): found reiserfs format "3.6" with standard journal
    REISERFS (device sda3): using ordered data mode
    reiserfs: using flush barriers
    REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    REISERFS (device sda3): checking transaction log (sda3)
    REISERFS (device sda3): Using r5 hash to sort names
    udev[19837]: starting version 164
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    r8169 0000:02:00.0: setting latency timer to 64
    r8169 0000:02:00.0: eth0: RTL8102e at 0xf9dbc000, 00:1e:68:a4:39:f7, XID 04a00000 IRQ 17
    ACPI: AC Adapter [ACAD] (on-line)
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    ACPI: Power Button [PWRB]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
    ACPI: Lid Switch [LID0]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    ACPI: Power Button [PWRF]
    wmi: Mapper loaded
    ACPI: Battery Slot [BAT1] (battery present)
    Marking TSC unstable due to TSC halts in idle
    ACPI: acpi_idle registered with cpuidle
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2382] (rev 0)
    sdhci-pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    sdhci-pci 0000:04:00.0: setting latency timer to 64
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
    sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
    sdhci-pci 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
    sdhci-pci 0000:04:00.2: PCI INT A disabled
    Switching to clocksource hpet
    cfg80211: Calling CRDA to update world regulatory domain
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
    ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
    Real Time Clock Driver v1.12b
    ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ath5k 0000:03:00.0: setting latency timer to 64
    ath5k 0000:03:00.0: registered as 'phy0'
    snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    acer_wmi: Acer Laptop ACPI-WMI Extras
    acer_wmi: Blacklisted hardware detected - not loading
    ath: EEPROM regdomain: 0x65
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x65
    ieee80211 phy0: Selected rate control algorithm 'pid'
    Registered led device: ath5k-phy0::rx
    Registered led device: ath5k-phy0::tx
    ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
    scsi_verify_blk_ioctl: 2 callbacks suppressed
    mdadm: sending ioctl 1261 to a partition!
    mdadm: sending ioctl 1261 to a partition!
    mdadm: sending ioctl 1261 to a partition!
    mdadm: sending ioctl 1261 to a partition!
    mdadm: sending ioctl 1261 to a partition!
    mdadm: sending ioctl 1261 to a partition!
    mdadm: sending ioctl 1261 to a partition!
    mdadm: sending ioctl 1261 to a partition!
    mdadm: sending ioctl 800c0910 to a partition!
    mdadm: sending ioctl 800c0910 to a partition!
    md: md127 stopped.
    md: bind<sda>
    md: md126 stopped.
    md: bind<sda>
    bio: create slab <bio-1> at 1
    md/raid0:md126: too few disks (1 of 2) - aborting!
    md: pers->run() failed ...
    acer_wmi: Acer Laptop ACPI-WMI Extras
    acer_wmi: Blacklisted hardware detected - not loading
    warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
    NET: Registered protocol family 10


Если гружусь с USB-шного диска, всё нормально находится и монтируется:
http://foto.nnov.org/psh1024/0/ee/58/3eca03727ba1e8fcbaf9690c.png

Посоветуйте, пожалуйста, как заставить минимальный лив работать с этими разделами?
Back to top
View user's profile Send private message
burik666
n00b
n00b


Joined: 28 Jan 2007
Posts: 50
Location: Санкт-Петербург

PostPosted: Fri Jul 20, 2012 12:04 pm    Post subject: Reply with quote

попробуйте
Code:
hdparm -z /dev/sda
или
Code:
mknod /dev/sda1 b 8 1
mknod /dev/sda2 b 8 2
mknod /dev/sda3 b 8 3

_________________
Linux for you
gentoo.bloodhost.ru Gentoo mirror (Russia, Saint-Petersburg)
Back to top
View user's profile Send private message
borskiy
n00b
n00b


Joined: 19 Jul 2012
Posts: 8
Location: д.Редькино, Нижегородская губерния, РФ

PostPosted: Thu Aug 02, 2012 8:12 am    Post subject: Reply with quote

Спасибо огромное!
Первый вариант сработал.

Рано обрадовался. :(
Разделы появились, но монтироваться всё равно не хотят.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Russian All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum