Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Upgrade to xorg-server 1.12.2 broken
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Portage & Programming
View previous topic :: View next topic  
Author Message
sl70
Guru
Guru


Joined: 18 Jun 2002
Posts: 387
Location: Chicago, USA

PostPosted: Sun Jun 24, 2012 8:12 pm    Post subject: Upgrade to xorg-server 1.12.2 broken Reply with quote

The upgrade to xorg-server 1.12.2 appeared yesterday, and after emerging it and 106 associated packages, X fails to start, giving me these messages:
Code:
[176350.435] Backtrace:
[176350.435] 0: /usr/bin/X (xorg_backtrace+0x36) [0x552236]
[176350.435] 1: /usr/bin/X (0x400000+0x155969) [0x555969]
[176350.435] 2: /lib64/libpthread.so.0 (0x7fce42179000+0xf9c0) [0x7fce421889c0]
[176350.435] 3: /usr/lib64/xorg/modules/drivers/radeon_drv.so (0x7fce3e9bb000+0xb8b10) [0x7fce3e
a73b10]
[176350.435] 4: /usr/lib64/xorg/modules/drivers/radeon_drv.so (0x7fce3e9bb000+0xaf2dd) [0x7fce3e
a6a2dd]
[176350.435] 5: /usr/lib64/xorg/modules/drivers/radeon_drv.so (0x7fce3e9bb000+0xb07dc) [0x7fce3e
a6b7dc]
[176350.435] 6: /usr/lib64/xorg/modules/libexa.so (0x7fce3df4e000+0xe276) [0x7fce3df5c276]
[176350.435] 7: /usr/lib64/xorg/modules/libexa.so (0x7fce3df4e000+0xeb79) [0x7fce3df5cb79]
[176350.435] 8: /usr/bin/X (0x400000+0xe657a) [0x4e657a]
[176350.435] 9: /usr/bin/X (0x400000+0xa5e65) [0x4a5e65]
[176350.435] 10: /usr/bin/X (BlockHandler+0x44) [0x438073]
[176350.435] 11: /usr/bin/X (WaitForSomething+0x11d) [0x54fcd6]
[176350.435] 12: /usr/bin/X (0x400000+0x34307) [0x434307]
[176350.435] 13: /usr/bin/X (0x400000+0x24e4d) [0x424e4d]
[176350.435] 14: /lib64/libc.so.6 (__libc_start_main+0xec) [0x7fce410c1264]
[176350.435] 15: /usr/bin/X (0x400000+0x24a19) [0x424a19]
[176350.435]
[176350.436] Segmentation fault at address 0x3ea6a736
[176350.436]
Fatal server error:
[176350.436] Caught signal 11 (Segmentation fault). Server aborting
[176350.436]


Fortunately, I was able to get my system back by masking >xorg-server-1.11.4-r1 and the updated x11-drivers/ packages. But, many other packages (too many to try to mask and rebuild) that were compiled against the newer version don't work. What's going on here?


Last edited by sl70 on Tue Jun 26, 2012 2:55 pm; edited 3 times in total
Back to top
View user's profile Send private message
EatMeerkats
Apprentice
Apprentice


Joined: 15 Mar 2006
Posts: 234

PostPosted: Sun Jun 24, 2012 9:15 pm    Post subject: Reply with quote

Quote:
You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)
because the ABI changed. If you cannot start X because
of module version mismatch errors, this is your problem.

You can generate a list of all installed packages in the x11-drivers
category using this command:
emerge portage-utils; qlist -I -C x11-drivers/
or using sets from portage-2.2:
emerge @x11-module-rebuild

Did you do this?
Back to top
View user's profile Send private message
sl70
Guru
Guru


Joined: 18 Jun 2002
Posts: 387
Location: Chicago, USA

PostPosted: Mon Jun 25, 2012 12:47 am    Post subject: Reply with quote

Yes, I did that several times, actually. And I don't think this is a module version mismatch problem. It's a freakin' segfault.
Back to top
View user's profile Send private message
niterain
n00b
n00b


Joined: 28 Feb 2012
Posts: 2

PostPosted: Mon Jun 25, 2012 5:07 pm    Post subject: Reply with quote

yeah, I am having the same problem. I upgraded all my modules as well, by using:

emerge `qlist -I -C x11-drivers/`

and still having problems.
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6194

PostPosted: Mon Jun 25, 2012 5:34 pm    Post subject: Reply with quote

Odd, I've been on 1.12 since 8th March, 1.12.2 for about 3 weeks and it seems to be working just fine.

Any more details about your setups ?
Back to top
View user's profile Send private message
khayyam
Watchman
Watchman


Joined: 07 Jun 2012
Posts: 6228
Location: Room 101

PostPosted: Mon Jun 25, 2012 6:19 pm    Post subject: Reply with quote

sl70, niterain, et al ...

I did the upgrade this morning with no issues. I'd taken the opportunity to move from xorg-x11 to the more streamlined xorg-server and so after having un-merged xorg-x11, and run --depclean, I did the emerge xorg-server and then a '--update --deep' to update any packages not pulled in by xorg-server. It was at this point that portage warned me to re-emerge libxcb and xcb-utils, which I did. After the update was complete I run revdep-rebuild which re-merged x11-wm/i3 (my window manager) and perhaps one other package.

So, perhaps you missed the warning re libxcb and xcb-utils ... just a guess, as I said the update was fairly painless here ...

HTH & best ...

khay
Back to top
View user's profile Send private message
sl70
Guru
Guru


Joined: 18 Jun 2002
Posts: 387
Location: Chicago, USA

PostPosted: Mon Jun 25, 2012 7:30 pm    Post subject: Reply with quote

Both xcb and xcb-utils were included in the merge of 92 packages. This problem arose simultaneously in my computers at home and in the office with the same xorg-server upgrade. Both computers have ATI video cards and use the open-source drivers. Here is my emerge --info:
Code:
Portage 2.1.10.65 (default/linux/amd64/10.0, gcc-4.5.3, glibc-2.14.1-r3, 3.3.8-gentoo x86_64)
=================================================================
System uname: Linux-3.3.8-gentoo-x86_64-Intel-R-_Xeon-R-_CPU_W3520_@_2.67GHz-with-gentoo-2.1
Timestamp of tree: Mon, 25 Jun 2012 07:45:01 +0000
distcc 3.1 x86_64-pc-linux-gnu [disabled]
ccache version 3.1.7 [disabled]
app-shells/bash:          4.2_p20
dev-java/java-config:     2.1.11-r3
dev-lang/python:          2.4.6, 2.6.6-r2, 2.7.3-r2, 3.1.4-r3, 3.2.3
dev-util/ccache:          3.1.7
dev-util/cmake:           2.8.7-r5
dev-util/pkgconfig:       0.26
sys-apps/baselayout:      2.1-r1
sys-apps/openrc:          0.9.8.4
sys-apps/sandbox:         2.5
sys-devel/autoconf:       2.13, 2.68
sys-devel/automake:       1.9.6-r3, 1.10.3, 1.11.1
sys-devel/binutils:       2.21.1-r1
sys-devel/gcc:            4.5.3-r2
sys-devel/gcc-config:     1.6
sys-devel/libtool:        2.4-r1
sys-devel/make:           3.82-r1
sys-kernel/linux-headers: 3.1 (virtual/os-headers)
sys-libs/glibc:           2.14.1-r3
Repositories: gentoo sunrise x-portage x-layman
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=nocona -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt /var/lib/hsqldb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gento   o-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.   d /etc/texmf/web2c"
CXXFLAGS="-march=nocona -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
EMERGE_DEFAULT_OPTS="--keep-going --autounmask=n --with-bdeps=y"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs confcache config-protect-if-modified distlocks ebuild-locks fixlafiles news parallel-fetch p   arse-eapi-ebuild-head protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://mirror.mcs.anl.gov/pub/gentoo/ http://gentoo.cites.uiuc.edu/pub/gentoo/ "
LANG="en_US.UTF-8"
LC_ALL="en_US.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LINGUAS="en ja"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-rea   dable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage/layman/sunrise /usr/local/portage /var/lib/layman"
SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"

USE="3dnow X Xaw3d aac acl alsa amd64 apm arts atlas audiofile avi berkdb blas browserplugin bzip2 canna cjk cli consolekit cracklib crypt cups curl cxx dbus dmix dri dvd dvdr emacs encode esd f77 faad firefox flac fortran freewnn gdbm gif glib glitz gnome gnutls gpg gpm gtk gtk2 iconv imlib immqt-bc ipv6 jack java jpeg kde lapack leim libg++ libwww live mikmod mmx modules mozsvg mp3    mpeg mudflap multilib musepack ncurses nls nptl nptlonly nsplugin ogg opengl openmp oss pam pcre pdflib perl png policykit pppd python qt qt3support qtmt quicktime readline sdl semantic-desktop session slang spell sse sse2 ssl svg tcpd truetype udev uim unicode usb userlocales vorbis wma x86_64 xfs xml xml2 xorg xrandr xulrunner xv zlib"
ALSA_CARDS="snd-hda-intel"
ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias"
CALLIGRA_FEATURES="kexi words flow plan sheets    stage tables krita karbon braindump"
CAMERAS="ptp2"
COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog"
ELIBC="glibc"
GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver    oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx"
INPUT_DEVICES="evdev mouse keyboard"
KERNEL="linux"
LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text"
LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer"
LINGUAS="en ja"
PHP_TARGETS="php5-3"
PYTHON_TARGETS="python3_2 python2_7"
RUBY_TARGETS="ruby18 ruby19"
USERLAND="GNU"
VIDEO_CARDS="ati vesa vga radeon radeonhd"
XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, INSTALL_MASK, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_O   PTS, USE_PYTHON


TIA.
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6194

PostPosted: Mon Jun 25, 2012 7:45 pm    Post subject: Reply with quote

Funny, I'm on open radeon too, though my video card is quite old.

More details, please - include package versions for relevant packages.
Back to top
View user's profile Send private message
sl70
Guru
Guru


Joined: 18 Jun 2002
Posts: 387
Location: Chicago, USA

PostPosted: Mon Jun 25, 2012 8:10 pm    Post subject: Reply with quote

@VoidMage: my card is pretty old, too:
Code:
(--) RADEON(0): Chipset: "ATI Radeon HD 4350" (ChipID = 0x954f)


Code:

x11-drivers/radeon-ucode-20110531
x11-drivers/xf86-input-evdev-2.6.0
x11-drivers/xf86-input-keyboard-1.6.0
x11-drivers/xf86-input-mouse-1.7.1
x11-drivers/xf86-video-ati-6.14.3
x11-drivers/xf86-video-fbdev-0.4.2
x11-drivers/xf86-video-vesa-2.3.0

x11-base/xorg-drivers-1.12
x11-base/xorg-server-1.11.4-r1
x11-base/xorg-x11-7.4-r2

x11-proto/bigreqsproto-1.1.2
x11-proto/compositeproto-0.4.2
x11-proto/damageproto-1.2.1
x11-proto/dri2proto-2.6
x11-proto/fixesproto-5.0
x11-proto/fontcacheproto-0.1.3
x11-proto/fontsproto-2.1.2
x11-proto/glproto-1.4.15
x11-proto/inputproto-2.2
x11-proto/kbproto-1.0.6
x11-proto/printproto-1.0.5
x11-proto/randrproto-1.3.2
x11-proto/recordproto-1.14.2
x11-proto/renderproto-0.11.1
x11-proto/resourceproto-1.2.0
x11-proto/scrnsaverproto-1.2.2
x11-proto/trapproto-3.4.3
x11-proto/videoproto-2.3.1
x11-proto/xcb-proto-1.7.1
x11-proto/xcmiscproto-1.2.2
x11-proto/xextproto-7.2.1
x11-proto/xf86bigfontproto-1.2.0
x11-proto/xf86dgaproto-2.1-r1
x11-proto/xf86driproto-2.1.1
x11-proto/xf86miscproto-0.9.3
x11-proto/xf86rushproto-1.1.2-r1
x11-proto/xf86vidmodeproto-2.3.1
x11-proto/xineramaproto-1.2.1
x11-proto/xproto-7.0.23-r1

x11-libs/cairo-1.10.2-r2
x11-libs/gdk-pixbuf-2.24.1-r1
x11-libs/gnome-pty-helper-0.28.1
x11-libs/goffice-0.8.17
x11-libs/gtk+-1.2.10-r12
x11-libs/gtk+-2.24.10-r1
x11-libs/gtk+-3.2.4-r1
x11-libs/gtkglarea-2.0.1
x11-libs/gtkglext-1.2.0
x11-libs/gtkmathview-0.8.0-r1
x11-libs/gtksourceview-2.10.5-r2
x11-libs/libICE-1.0.8
x11-libs/libSM-1.2.1
x11-libs/libX11-1.5.0
x11-libs/libXScrnSaver-1.2.2
x11-libs/libXau-1.0.7
x11-libs/libXaw-1.0.11
x11-libs/libXaw3d-1.6.2
x11-libs/libXcomposite-0.4.3-r1
x11-libs/libXcursor-1.1.13
x11-libs/libXdamage-1.1.3
x11-libs/libXdmcp-1.1.1
x11-libs/libXext-1.3.1
x11-libs/libXfixes-5.0
x11-libs/libXfont-1.4.5
x11-libs/libXfontcache-1.0.5-r1
x11-libs/libXft-2.3.1
x11-libs/libXi-1.6.1
x11-libs/libXinerama-1.1.2
x11-libs/libXmu-1.1.1
x11-libs/libXp-1.0.1
x11-libs/libXpm-3.5.10
x11-libs/libXrandr-1.3.2
x11-libs/libXrender-0.9.7
x11-libs/libXres-1.0.6
x11-libs/libXt-1.1.3
x11-libs/libXtst-1.2.1
x11-libs/libXv-1.0.7
x11-libs/libXvMC-1.0.7
x11-libs/libXxf86dga-1.1.3
x11-libs/libXxf86misc-1.0.3
x11-libs/libXxf86vm-1.1.2
x11-libs/libast-0.7
x11-libs/libdockapp-0.6.1
x11-libs/libdrm-2.4.33
x11-libs/libfontenc-1.1.1
x11-libs/libnotify-0.7.5
x11-libs/libpciaccess-0.13.1
x11-libs/libsexy-0.1.11-r3
x11-libs/libwnck-2.31.0
x11-libs/libwnck-3.2.1
x11-libs/libxcb-1.8.1
x11-libs/libxkbfile-1.0.8
x11-libs/libxklavier-5.2.1
x11-libs/pango-1.29.4
x11-libs/pixman-0.26.0
x11-libs/qt-core-4.8.1-r3
x11-libs/qt-dbus-4.8.1
x11-libs/qt-declarative-4.8.1
x11-libs/qt-gui-4.8.1-r1
x11-libs/qt-multimedia-4.8.1
x11-libs/qt-opengl-4.8.1
x11-libs/qt-qt3support-4.8.1
x11-libs/qt-script-4.8.1
x11-libs/qt-sql-4.8.1
x11-libs/qt-svg-4.8.1
x11-libs/qt-test-4.8.1
x11-libs/qt-webkit-4.8.1
x11-libs/qt-xmlpatterns-4.8.1
x11-libs/startup-notification-0.12
x11-libs/vte-0.28.2-r203
x11-libs/vte-0.30.1-r3
x11-libs/xcb-util-0.3.9
x11-libs/xcb-util-image-0.3.9
x11-libs/xcb-util-keysyms-0.3.9
x11-libs/xcb-util-renderutil-0.3.8
x11-libs/xcb-util-wm-0.3.9
x11-libs/xtrans-1.2.7


Need anything else?
Back to top
View user's profile Send private message
Princess Nell
l33t
l33t


Joined: 15 Apr 2005
Posts: 777

PostPosted: Mon Jun 25, 2012 9:23 pm    Post subject: Reply with quote

I had to re-emerge startup-notification in addition to the drivers.
Back to top
View user's profile Send private message
khayyam
Watchman
Watchman


Joined: 07 Jun 2012
Posts: 6228
Location: Room 101

PostPosted: Mon Jun 25, 2012 10:04 pm    Post subject: Reply with quote

Princess Nell wrote:
I had to re-emerge startup-notification in addition to the drivers.

ahhh, yes ... that was the "one other package" mentioned above.

best ... khay
Back to top
View user's profile Send private message
sl70
Guru
Guru


Joined: 18 Jun 2002
Posts: 387
Location: Chicago, USA

PostPosted: Mon Jun 25, 2012 10:44 pm    Post subject: Reply with quote

startup-notifications? I certainly wouldn't have thought it. I'll give it a try.
Back to top
View user's profile Send private message
sl70
Guru
Guru


Joined: 18 Jun 2002
Posts: 387
Location: Chicago, USA

PostPosted: Tue Jun 26, 2012 2:45 am    Post subject: Reply with quote

Yay! That worked! Big thanks to Princess Nell and Khayyam!
Back to top
View user's profile Send private message
sl70
Guru
Guru


Joined: 18 Jun 2002
Posts: 387
Location: Chicago, USA

PostPosted: Tue Jun 26, 2012 4:09 am    Post subject: Reply with quote

Ach! I spoke too soon. It worked (I think) on my office machine, but the problem persists on my computer at home. (Actually, I don't know for sure that it worked on the office computer. I did it remotely, and when I restarted xdm, I did not get the segmentation fault message in the log. I'll have to check for sure when I go in to work tomorrow.)

Still open to suggestions.
Back to top
View user's profile Send private message
khayyam
Watchman
Watchman


Joined: 07 Jun 2012
Posts: 6228
Location: Room 101

PostPosted: Tue Jun 26, 2012 9:19 am    Post subject: Reply with quote

sl70 ...

Are both your work machine and desktop 64bit? Also, have you tryed with startx rather than xdm? I ask as it might help if we narrow down the possible causes.

best ... khay
Back to top
View user's profile Send private message
John R. Graham
Administrator
Administrator


Joined: 08 Mar 2005
Posts: 10456
Location: Somewhere over Atlanta, Georgia

PostPosted: Tue Jun 26, 2012 12:16 pm    Post subject: Reply with quote

niterain wrote:
yeah, I am having the same problem. I upgraded all my modules as well, by using:

emerge `qlist -I -C x11-drivers/`

and still having problems.
Not related to the issue, but you've just polluted your world set with all of your x11 drivers. When you're manually re-emerging something, you should always include the --oneshot option. You can clean up the mess with
Code:
emerge --deselect `qlist -I -C x11-drivers`
:wink:

- John
_________________
I can confirm that I have received between 0 and 499 National Security Letters.
Back to top
View user's profile Send private message
sl70
Guru
Guru


Joined: 18 Jun 2002
Posts: 387
Location: Chicago, USA

PostPosted: Tue Jun 26, 2012 2:54 pm    Post subject: Reply with quote

My work machine was no good, either. I had to roll back the packages and rebuild.

@khayyam: yes, I have tried startx, but that gives me the same segfault.
Back to top
View user's profile Send private message
khayyam
Watchman
Watchman


Joined: 07 Jun 2012
Posts: 6228
Location: Room 101

PostPosted: Tue Jun 26, 2012 11:09 pm    Post subject: Reply with quote

sl70 wrote:
@khayyam: yes, I have tried startx, but that gives me the same segfault.

I imagined as much, it was just a question of trying to rule out possible causes. Also, as you've posted logs showing one of the machines is x86_64 is the other likewise? Again, this might be something that could provide a possible cause, and why I, on ia32, didn't have similar issues.

best ... khay
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Wed Jun 27, 2012 12:12 am    Post subject: Reply with quote

Instead of downgrading xorg-server, you can try to unmask xf86-video-ati-6.14.5 and libdrm-2.4.35
They are still masked because the nouveau part of mesa does not work with >=libdrm-2.4.34
Back to top
View user's profile Send private message
sl70
Guru
Guru


Joined: 18 Jun 2002
Posts: 387
Location: Chicago, USA

PostPosted: Wed Jun 27, 2012 4:04 am    Post subject: Reply with quote

Tried it. Same segfault.
Back to top
View user's profile Send private message
Voransky
n00b
n00b


Joined: 27 Jun 2012
Posts: 10
Location: Český Krumlov

PostPosted: Wed Jun 27, 2012 9:29 pm    Post subject: slow X on x32 bit intel Reply with quote

Actually I have the similar problem on my x32 machine with intel video card. I've also emerged all the drivers that was shown to me by the above command and the startup-notification package as well (sugested by redep-rebuild). Anyway since X are working it's painfully slow, I have to wait even a minute for a response sometimes. Even emerge --deep @world doesn't help to me....
I'll send my configuration fails and logs from Xorg-server tomorow from beter working system, because I'm in CLI right now...
Any help would be welcome
Back to top
View user's profile Send private message
khayyam
Watchman
Watchman


Joined: 07 Jun 2012
Posts: 6228
Location: Room 101

PostPosted: Wed Jun 27, 2012 9:58 pm    Post subject: Reply with quote

sl70 ...

Just a thought ... as the warning about re-merging libxcb and xcb-util came from x11-proto/xcb-proto (I've since discovered from another thread) these may have been merged prior to xcb-proto and you may still need to re-merge them. If I think of the cronology of my own update it went something like this:
  • emerge --update xorg-server (which pulled in x11-proto/xcb-proto, and provided the warning re libxcb and xcb-util)
  • emerge --oneshot libxcb xcb-util
  • revdep-rebuild (which rebuilt startup-notification and x11-wm/i3)
So, though these packages may have been updated during your --update they may have been merged prior to xcb-proto. Again, just a thought, as I think your perhaps done with messing with it.

Voransky ... your problem may be similar but it could just as well be unrelated ... your best to start your own thread as then this thread remains focused on this specific problem.

best ... khay
Back to top
View user's profile Send private message
Voransky
n00b
n00b


Joined: 27 Jun 2012
Posts: 10
Location: Český Krumlov

PostPosted: Wed Jun 27, 2012 10:15 pm    Post subject: Reply with quote

khayyam:
ok, I'll make a new thread for my issue, I've just posted here because it was the only one that I've found about some problems with this update...
Back to top
View user's profile Send private message
Voransky
n00b
n00b


Joined: 27 Jun 2012
Posts: 10
Location: Český Krumlov

PostPosted: Wed Jun 27, 2012 10:44 pm    Post subject: Reply with quote

just last post, because problem is solved for me, emerging xcb-proto helped, so thanks to khayyam :-)
Back to top
View user's profile Send private message
khayyam
Watchman
Watchman


Joined: 07 Jun 2012
Posts: 6228
Location: Room 101

PostPosted: Wed Jun 27, 2012 11:05 pm    Post subject: Reply with quote

Voransky wrote:
just last post, because problem is solved for me, emerging xcb-proto helped, so thanks to khayyam

OK, good. This suggests that the xcb-proto was built against the old libxcb and that my cronology above is not entirely correct, xcb-proto should come after libxcb ... anyhow, revdep-rebuild should re-merge anything that was built against the previous libxcb.

Its still not certain that this is the cause of sl70's segfault ... but anyhow, its good that your problem is now fixed.

best ... khay
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Portage & Programming All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum