Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
I may be putting too much on my power supply (solved)
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2196

PostPosted: Sat Apr 14, 2012 5:20 pm    Post subject: I may be putting too much on my power supply (solved) Reply with quote

I've got a 500w power supply. It was running:

- 4 SATA hard drives
- two memory sticks
- motherboard
- 1Gbit network card
- processor

with no issues.

I've upgraded to a new motherboard (which doesn't have on-board video). So the following is the new power consumption list:

- 5 SATA hard drives
- three memory sticks
- motherboard
- processor
- 8 Mb PCI Video Card (not PCIe)
- 1Gbit network card

Now the computer was booting fine the first few times, now only seems to stay on for about 5 seconds.... then dies and stays dead until I remove power and re-apply. I guess it's just too much for the supply. My questions are:

1) Am I right about too much for the supply?
2) If so, how high should I go?
_________________
"It's ok, they might have guns but we have flowers." - Perpetual Victim


Last edited by Bigun on Mon Apr 16, 2012 10:44 am; edited 1 time in total
Back to top
View user's profile Send private message
BillWho
Veteran
Veteran


Joined: 03 Mar 2012
Posts: 1600
Location: US

PostPosted: Sat Apr 14, 2012 5:41 pm    Post subject: Reply with quote

Bigun,

I find this site helpful - there are others too :!:

http://extreme.outervision.com/psucalculatorlite.jsp

Good luck :wink:
Back to top
View user's profile Send private message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2196

PostPosted: Sat Apr 14, 2012 6:52 pm    Post subject: Reply with quote

That doesn't make any sense, it says I only need a 300 watt.
_________________
"It's ok, they might have guns but we have flowers." - Perpetual Victim
Back to top
View user's profile Send private message
albright
Advocate
Advocate


Joined: 16 Nov 2003
Posts: 2588
Location: Near Toronto

PostPosted: Sat Apr 14, 2012 7:04 pm    Post subject: Reply with quote

Quote:
1) Am I right about too much for the supply?


what happens if you take out the memory sticks and 4
of the drives ... ?
_________________
.... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme)
Back to top
View user's profile Send private message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2196

PostPosted: Sat Apr 14, 2012 8:41 pm    Post subject: Reply with quote

albright wrote:
Quote:
1) Am I right about too much for the supply?


what happens if you take out the memory sticks and 4
of the drives ... ?


Still won't boot... the computer power lights stay on for about 2 seconds.... flickers sporadically, then goes dead.
_________________
"It's ok, they might have guns but we have flowers." - Perpetual Victim
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54029
Location: 56N 3W

PostPosted: Sat Apr 14, 2012 9:37 pm    Post subject: Reply with quote

Bigun,

Is this new system a home made PC?
Have you had some practice at getting the heatsink compound on the CPU just like baby bears porridge?
or did you use a heatsink with a thermal pad already fitted?

You won't be getting near 500w at startup but there are several thingsto consider.
1. The start up surge - SATA drives draw about 12w active and a lot more at spin up.
2. Your PSU can't really supply 500w unless its split across the outputs exactly right, and it never is.
There will be a limit for each 12v supply (you should have 2) and for the 3.3v and 5v combined.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2196

PostPosted: Sat Apr 14, 2012 10:59 pm    Post subject: Reply with quote

NeddySeagoon wrote:
Bigun,

Is this new system a home made PC?
Have you had some practice at getting the heatsink compound on the CPU just like baby bears porridge?
or did you use a heatsink with a thermal pad already fitted?

You won't be getting near 500w at startup but there are several thingsto consider.
1. The start up surge - SATA drives draw about 12w active and a lot more at spin up.
2. Your PSU can't really supply 500w unless its split across the outputs exactly right, and it never is.
There will be a limit for each 12v supply (you should have 2) and for the 3.3v and 5v combined.


This is a custom built rig. Then possibly a bad power supply?
_________________
"It's ok, they might have guns but we have flowers." - Perpetual Victim
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54029
Location: 56N 3W

PostPosted: Sat Apr 14, 2012 11:09 pm    Post subject: Reply with quote

Bigun,

Or a bad motherboard.

Slacken all of the screws holding the motherboard into the case, to the point where the heads do not touch the board.
Does that help?
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
PaulBredbury
Watchman
Watchman


Joined: 14 Jul 2005
Posts: 7310

PostPosted: Sat Apr 14, 2012 11:12 pm    Post subject: Reply with quote

Are you able to check the CPU temperature in one of the BIOS' screens?

If the CPU's heatsink isn't properly mounted, with the paste doing its job, then the CPU will kill the power in literally seconds, to stop itself from melting. I've seen it myself, on a CPU heatsink where one of the 4 plastic corner connections broke, so it wasn't quite making contact.
Back to top
View user's profile Send private message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2196

PostPosted: Sun Apr 15, 2012 12:44 am    Post subject: Reply with quote

PaulBredbury wrote:
Are you able to check the CPU temperature in one of the BIOS' screens?

If the CPU's heatsink isn't properly mounted, with the paste doing its job, then the CPU will kill the power in literally seconds, to stop itself from melting. I've seen it myself, on a CPU heatsink where one of the 4 plastic corner connections broke, so it wasn't quite making contact.


Before it stopped working, I checked that, the sink seemed to be doing it's job nicely.
_________________
"It's ok, they might have guns but we have flowers." - Perpetual Victim
Back to top
View user's profile Send private message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2196

PostPosted: Sun Apr 15, 2012 12:44 am    Post subject: Reply with quote

NeddySeagoon wrote:
Bigun,

Or a bad motherboard.

Slacken all of the screws holding the motherboard into the case, to the point where the heads do not touch the board.
Does that help?


I will try that tomorrow, right now I need to step back before I throw it out my window.
_________________
"It's ok, they might have guns but we have flowers." - Perpetual Victim
Back to top
View user's profile Send private message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2196

PostPosted: Sun Apr 15, 2012 11:39 am    Post subject: Reply with quote

NeddySeagoon wrote:
Slacken all of the screws holding the motherboard into the case, to the point where the heads do not touch the board.
Does that help?


Same result
_________________
"It's ok, they might have guns but we have flowers." - Perpetual Victim
Back to top
View user's profile Send private message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2196

PostPosted: Sun Apr 15, 2012 11:48 am    Post subject: Reply with quote

Ok, now I'm about 99% sure it's the power supply.

I took out the PSU, opened it up, and I see at least 3 capacitors that are leaking electrolyte from their bulging tops. Tempted to just replace the caps.

*EDIT*

Crap, I can't. Looks like they used some kind of hardened glue to make sure no component replacements could happen without replacing a whole glob of components. Looks like a new PSU for me.

Also, I recounted: 4 Caps are leaking (3 from the top, 1 from the bottom), and another two were bulging. I'm thinking it would do fine at just running idle, which it did for quite a while, but can't handle cold starts. Probably has been this way for a while.
_________________
"It's ok, they might have guns but we have flowers." - Perpetual Victim
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54029
Location: 56N 3W

PostPosted: Sun Apr 15, 2012 12:10 pm    Post subject: Reply with quote

Bigun,

PSUs need really good caps to handle the ripple current. You get what you pay for. Look at cheap PSUs - don't expect them to outlast the warranty by very much.
Look at expensive PSUs - you don't need all the extra bling and connectors. Buy a PSU in the middle rang. It will be made with good quality parts and have none of the eye candy.

Don't bother replacing the caps. The failing caps will overstress other parts.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2196

PostPosted: Mon Apr 16, 2012 10:44 am    Post subject: Reply with quote

Looks like that online calculator was right. I found a spare 300 watt, put it in, and it booted up just fine.
_________________
"It's ok, they might have guns but we have flowers." - Perpetual Victim
Back to top
View user's profile Send private message
eccerr0r
Watchman
Watchman


Joined: 01 Jul 2004
Posts: 9601
Location: almost Mile High in the USA

PostPosted: Mon Apr 16, 2012 7:40 pm    Post subject: Reply with quote

My server has a 300W PSU (AthlonXP2200+, 2x512MB DIMMs, 5 PATA hard drives, ATI Radeon 9250SE, RTL8169 Gbit Ethernet) and seems to work OK for the past few years of 24/7/365 use (Antec Smartpower 300). Need to watch out for many cheap PSUs.

It's not easy to tell a cheap PSU from a good one but a layman's check: usually good PSUs are heavy for their wattage/size (for the larger heatsinks). Also 200W PSUs are lighter than 500W PSUs.

This of course is not the definitive way to tell a crappy PSU from a good one, have to do some qualitiative checks...

Also had to mention, the bad caps tend to be the output caps from what I've seen. I don't see too many input caps die. When the output caps blow the downstream stuff that gets stress is ... hard disks, CPU, motherboard, RAM...

Don't buy cheap PSUs... I'm quite impressed by the Smartpower 300, it was a replacement for a "cheap" psu I had, and has lasted much longer than I expected (and hope it keeps on working for years to come, knock on wood). That being said, I have an Antec Smartpower 400 that died. YMMV.
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching?
Back to top
View user's profile Send private message
duderonomy
Guru
Guru


Joined: 20 Mar 2004
Posts: 349
Location: SF Bay Area

PostPosted: Tue Apr 17, 2012 7:12 pm    Post subject: Reply with quote

what a great thread !!!
Back to top
View user's profile Send private message
eccerr0r
Watchman
Watchman


Joined: 01 Jul 2004
Posts: 9601
Location: almost Mile High in the USA

PostPosted: Wed Nov 07, 2012 2:51 pm    Post subject: Reply with quote

My Smartpower 300 just died on me :(
Apparently the fan failed and I didn't notice in time (should have made lm-sensors send mail! It has a tach on the fan!). The PSU roasted itself to death.
Though the failed fan may have sealed fate but there were bad caps everywhere on the PSU board... hmm...
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching?
Back to top
View user's profile Send private message
DaggyStyle
Watchman
Watchman


Joined: 22 Mar 2006
Posts: 5909

PostPosted: Wed Nov 07, 2012 3:30 pm    Post subject: Reply with quote

eccerr0r wrote:
My Smartpower 300 just died on me :(
Apparently the fan failed and I didn't notice in time (should have made lm-sensors send mail! It has a tach on the fan!). The PSU roasted itself to death.
Though the failed fan may have sealed fate but there were bad caps everywhere on the PSU board... hmm...

how do you do that?
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein
Back to top
View user's profile Send private message
eccerr0r
Watchman
Watchman


Joined: 01 Jul 2004
Posts: 9601
Location: almost Mile High in the USA

PostPosted: Wed Nov 07, 2012 3:35 pm    Post subject: Reply with quote

Well, I could have just polled the sensor data and if any fan stops, then send mail...shouldnt be too hard. I don't think there is any interrupt driven method unfortunately.

Code:
CPUFan:      3443 RPM  (min =    0 RPM, div = 8)
PSUFan:         0 RPM  (min =  666 RPM, div = 8)  ALARM

:(
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching?
Back to top
View user's profile Send private message
DaggyStyle
Watchman
Watchman


Joined: 22 Mar 2006
Posts: 5909

PostPosted: Wed Nov 07, 2012 3:39 pm    Post subject: Reply with quote

eccerr0r wrote:
Well, I could have just polled the sensor data and if any fan stops, then send mail...shouldnt be too hard. I don't think there is any interrupt driven method unfortunately.

Code:
CPUFan:      3443 RPM  (min =    0 RPM, div = 8)
PSUFan:         0 RPM  (min =  666 RPM, div = 8)  ALARM

:(

I see, there is not builtin func, just a script that tests outputs periodically.

ok.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein
Back to top
View user's profile Send private message
eccerr0r
Watchman
Watchman


Joined: 01 Jul 2004
Posts: 9601
Location: almost Mile High in the USA

PostPosted: Tue Nov 13, 2012 5:59 pm    Post subject: Reply with quote

Well, looks like the SP300 suffered from the capacitor plague too...

Found at least five unserviceable capacitors already (the PWM IC power filter capacitor, both +3.3V output capacitors, and both +5V output capacitors). The +5VSB capacitors are also bad but not part of the protection circuitry so I'm ignoring for now.

FSCK YOU FUHJYYU (the brand of capacitors that failed)!
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum