| View previous topic :: View next topic |
| Author |
Message |
khorio
n00b
Joined: 29 Oct 2003
Posts: 43
|
 Posted: Sat Jan 28, 2012 9:48 am Post subject: [SOLVED] Cannot figure out what driver i'm missing |
 |
|
I'm trying to compile kernel-3.1.10-gentoo-r1 but keep getting kernel panic; unable to mount root fs.
Must be missing a driver somewhere but i can't figure out which one.
rootfs is on /dev/hda2
usr, tmp, var, home are on LVM /dev/vg/ (which is on /dev/hda4)
/usr/src/linux/.config:
http://pastebin.com/T18Z1gNF
lspci -v:
| Code: |
00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02)
Subsystem: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part
Flags: fast devsel
Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
Kernel modules: ati-agp
00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe900000-fe9fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190] Access Control Services
Kernel driver in use: pcieport
Kernel modules: shpchp
00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190] Access Control Services
Kernel driver in use: pcieport
Kernel modules: shpchp
00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe7fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190] Access Control Services
Kernel driver in use: pcieport
Kernel modules: shpchp
00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fe600000-fe6fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190] Access Control Services
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0c.0 PCI bridge: ATI Technologies Inc Device 5a20 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5a11
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190] Access Control Services
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 77
I/O ports at a000 [size=8]
I/O ports at 9000 [size=4]
I/O ports at 8000 [size=8]
I/O ports at 7000 [size=4]
I/O ports at 6000 [size=16]
Memory at fe4fe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+
Capabilities: [70] SATA HBA v1.0
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe4f7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe4fe400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe4fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe4fe800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41)
Flags: 66MHz, medium devsel
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40) (prog-if 8a [Master SecP PriP])
Subsystem: ATI Technologies Inc SB700/SB800 IDE Controller
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ff00 [size=16]
Kernel driver in use: ATIIXP_IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: ASUSTeK Computer Inc. Device 8410
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fe4f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe4fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe4ff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe4fec00 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
Flags: fast devsel
02:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device e147
Flags: bus master, fast devsel, latency 0, IRQ 85
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fe5e0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at b000 [size=256]
Expansion ROM at fe5c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: radeon
02:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series]
Subsystem: PC Partner Limited Device aa58
Flags: bus master, fast devsel, latency 0, IRQ 84
Memory at fe5bc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
03:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) (prog-if 30)
Subsystem: ASUSTeK Computer Inc. Device 8413
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at fe6fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
Capabilities: [150] #18
Kernel driver in use: xhci_hcd
Kernel modules: xhci-hcd
04:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 4381 (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 8439
Flags: bus master, fast devsel, latency 0, IRQ 83
Memory at fe7fc000 (64-bit, non-prefetchable) [size=16K]
I/O ports at c800 [size=256]
Expansion ROM at fe7c0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [c0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [130] Device Serial Number d0-e7-46-ff-ff-39-5b-48
Kernel driver in use: sky2
Kernel modules: sky2
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8384
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fe8ff800 (64-bit, non-prefetchable) [size=2K]
I/O ports at d800 [size=256]
Capabilities: [50] Power Management version 3
Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [98] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [130] Device Serial Number 00-1e-8c-ff-ff-d5-82-d6
06:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5B [JMB363]
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at fe9fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint, MSI 01
Kernel driver in use: ahci
Kernel modules: ahci
06:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. P5B [JMB363]
Flags: bus master, fast devsel, latency 0, IRQ 45
I/O ports at ec00 [size=8]
I/O ports at e880 [size=4]
I/O ports at e800 [size=8]
I/O ports at e480 [size=4]
I/O ports at e400 [size=16]
Capabilities: [68] Power Management version 2
Kernel driver in use: pata_jmicron
Kernel modules: jmicron
|
grub.conf:
| Code: |
title Khorio Linux 3.1.10
root(hd0,0)
kernel /boot/kernel-khorio-3.1.10-r1 dolvm real_root=/dev/hda2 video=1920x1080-32@60 splash=silent,fadein,theme:pipboy quiet console=tty1
initrd /boot/initramfs-bootsplash
|
fstab:
| Code: |
/dev/hda1 /boot ext4 noauto,noatime 1 2
/dev/hda2 / ext4 noatime 0 1
/dev/vg/home /home ext4 noatime 0 2
/dev/vg/usr /usr ext4 noatime 0 2
/dev/vg/tmp /tmp ext4 noatime 0 2
/dev/vg/var /var ext4 noatime 0 2
/dev/vg/opt /opt ext4 noatime 0 2
/dev/vg/swap none swap sw 0 0
|
lsmod (on genkernel)
| Code: |
Module Size Used by
ipv6 191685 36
radeon 745978 3
ttm 37535 1 radeon
drm_kms_helper 17912 1 radeon
drm 124004 5 radeon,ttm,drm_kms_helper
backlight 2820 1 radeon
i2c_algo_bit 3632 1 radeon
snd_hda_codec_hdmi 17713 1
snd_hda_codec_via 26840 1
joydev 6596 0
sky2 35157 0
snd_hda_intel 16246 1
snd_hda_codec 46038 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_pcm 43934 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 12259 1 snd_pcm
serio_raw 2854 0
snd 34342 8 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
ati_agp 4018 0
agpgart 18234 3 ttm,drm,ati_agp
i2c_piix4 6508 0
i2c_core 12899 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
snd_page_alloc 4857 2 snd_hda_intel,snd_pcm
xhci_hcd 51176 0
pcspkr 1223 0
processor 20917 0
button 3355 0
thermal_sys 9874 1 processor
tpm_tis 6282 0
tpm 8203 1 tpm_tis
tpm_bios 3412 1 tpm
tg3 104715 0
libphy 11919 1 tg3
e1000 76275 0
fuse 48872 11
nfs 211725 0
nfs_acl 1615 1 nfs
auth_rpcgss 26741 1 nfs
lockd 52016 1 nfs
sunrpc 136575 4 nfs,nfs_acl,auth_rpcgss,lockd
ext4 276227 7
jbd2 47656 1 ext4
raid10 21486 0
dm_snapshot 22910 0
dm_crypt 11347 0
dm_mirror 9951 0
dm_region_hash 5180 1 dm_mirror
dm_log 6477 2 dm_mirror,dm_region_hash
dm_mod 48553 25 dm_snapshot,dm_crypt,dm_mirror,dm_log
scsi_wait_scan 463 0
hid_sunplus 981 0
hid_sony 1932 0
hid_samsung 2222 0
hid_pl 869 0
hid_petalynx 1418 0
hid_monterey 1073 0
hid_microsoft 2075 0
hid_logitech 5183 0
hid_gyration 1540 0
hid_ezkey 922 0
hid_cypress 1270 0
hid_chicony 1201 0
hid_cherry 1029 0
hid_belkin 1130 0
hid_apple 3785 0
hid_a4tech 1364 0
sl811_hcd 7295 0
usbhid 25098 0
ohci_hcd 17071 0
ssb 31759 1 ohci_hcd
uhci_hcd 16076 0
usb_storage 30920 0
ehci_hcd 29189 0
usbcore 92703 9 xhci_hcd,hid_sony,sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd
aic94xx 55712 0
libsas 40464 1 aic94xx
lpfc 407318 0
qla2xxx 266557 0
megaraid_sas 53182 0
megaraid_mbox 21441 0
megaraid_mm 5526 1 megaraid_mbox
megaraid 31036 0
aacraid 54904 0
sx8 9719 0
DAC960 54436 0
cciss 81674 0
3w_9xxx 24572 0
3w_xxxx 18582 0
mptsas 38744 0
scsi_transport_sas 16673 3 aic94xx,libsas,mptsas
mptfc 10313 0
scsi_transport_fc 29326 3 lpfc,qla2xxx,mptfc
scsi_tgt 6824 1 scsi_transport_fc
mptspi 11519 0
mptscsih 21153 3 mptsas,mptfc,mptspi
mptbase 67725 4 mptsas,mptfc,mptspi,mptscsih
atp870u 22205 0
dc395x 23775 0
qla1280 16923 0
imm 7080 0
parport 20803 1 imm
dmx3191d 7600 0
sym53c8xx 56344 0
qlogicfas408 3577 0
gdth 69934 0
advansys 46186 0
initio 12915 0
BusLogic 17364 0
arcmsr 20326 0
aic7xxx 92181 0
aic79xx 97081 0
scsi_transport_spi 15279 5 mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx
sg 19200 0
pdc_adma 3986 0
sata_inic162x 4978 0
sata_mv 19570 0
ata_piix 17606 0
ahci 16477 2
libahci 13606 1 ahci
sata_qstor 3901 0
sata_vsc 2882 0
sata_uli 2037 0
sata_sis 2594 0
sata_sx4 6701 0
sata_nv 14387 0
sata_via 5140 0
sata_svw 2954 0
sata_sil24 8368 0
sata_sil 5420 0
sata_promise 7225 0
pata_pcmcia 6609 0
pcmcia 25045 2 ssb,pata_pcmcia
pcmcia_core 8389 1 pcmcia
|
cpuinfo:
| Code: |
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 965 Processor
stepping : 3
cpu MHz : 3411.473
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 6822.94
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
|
Any help is welcome.
Last edited by khorio on Sat Jan 28, 2012 2:50 pm; edited 1 time in total |
|
| Back to top |
|
 |
khorio
n00b
Joined: 29 Oct 2003
Posts: 43
|
| Posted: Sat Jan 28, 2012 1:14 pm Post subject: |
|
|
| Just tried to start from scratch again, with one of the kernel seeds and i bump into the same wall. |
|
| Back to top |
|
|
roarinelk
Guru
Joined: 04 Mar 2004
Posts: 520
|
| Posted: Sat Jan 28, 2012 1:32 pm Post subject: |
|
|
| try sda instead of hda ? |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54237
Location: 56N 3W
|
| Posted: Sat Jan 28, 2012 1:36 pm Post subject: |
|
|
khorio,
Several things. /dev/hd.. is obsolete. The old unloved drivers are still in the kernel but udev no longer makes /dev entries for them.
So, while rooy would mount, as root id defined in grub.conf no other /dev/hd... entries would be found.
In fact, root would be read only as rootfsck would fail, saying that /dev/hd... did not exist.
All hard drives get SCSI names now. Changing the hda to sda everywhere may be enough to get you started but there is more ...
| Code: | | 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (rev 40) (prog-if 01 [AHCI 1.0]) |
Tells that your SATA controller is set to IDE mode in the BIOS. If you use it, this is a very bad thing. IDE mode is incomplete. Its intended to be used once only by Windows users so taht they can install the AHCI driver before they switch out of IDE mode in the BIOS for ever. Linux uses AHCI mode for everything. If you don't use any SATA devices it won't matter.
| Code: | | 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40) (prog-if 8a [Master SecP PriP]) |
Tells you have an ATI PATA controller.
You also have the following HDD controllers
06:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 01 [AHCI 1.0])
06:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) (prog-if 85 [Master SecO PriO])
| Code: | | real_root=/dev/hda2 |
I've already covered that.
and
| Code: | /dev/hda1 /boot ext4 noauto,noatime 1 2
/dev/hda2 / ext4 noatime 0 1 |
Maybe you have a kernel for one controller and the HDD connected to another. Lets look at your kernel config.
must be off - even if you have real PATA devices with 40/80 wire ribbon cables.
This turns off all of the old depreciated drivers in the IDE menu.
If you have a multi card reader turn on | Code: | | # CONFIG_SCSI_MULTI_LUN is not set |
or only the first slot will work.
Turn off | Code: | | CONFIG_SCSI_LOWLEVEL=y |
it adds lost of junk for real SCSI that you don't need. Its harmless baggage but you don't have the hardware.
is good.
is good. That covers both your SATA interfaces once you switch them out of IDE mode in the BIOS
is baggage, its for Intel chip sets and you don't have one of those.
| Code: | CONFIG_PATA_ATIIXP=y
CONFIG_PATA_JMICRON=y |
are both good.
Just now you also have | Code: | CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_ATIIXP=y |
which are the old IDE drivers ... so you have two different drivers for your hard drive chipsets.
They will fight over the hardware and neither will work.
Fix your kernel with menuconfig, never $EDITOR, fix your grub.conf abd fstab then test.
menuconfig has a search function - press /
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
khorio
n00b
Joined: 29 Oct 2003
Posts: 43
|
| Posted: Sat Jan 28, 2012 2:31 pm Post subject: |
|
|
Thanks! that fixed it.
switched to AHCI mode in bios, fixed up fstab and grub, fixed the kernel..and got the same error.
Then i replaced real_root=/dev/sdc2 with root=/dev/sdc2 in grub and it booted fine. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
