View previous topic :: View next topic |
Author |
Message |
treyb n00b
Joined: 20 Sep 2011 Posts: 51
|
Posted: Thu Dec 08, 2011 7:31 pm Post subject: Wow crashed without errors. .... ATI graphics card problem |
|
|
I original had it running just fine with a nvidia card, but alas that card blew... When I replaced the card, I replaced it with a ATI card. This has caused a ton of errors. I have gotten all the references to nvidia out and replaced it with ati... I am able to run the X just fine now, but when I run wow launcher, which it comes just fine, and then click play..... It hangs. The launcher disappears and the game does not show up.
I have updated Wine to 1.3 and it still does not work. There is no error that pops up.... it just stalls out and I have to kill the PID just to get the launcher to show up again (the PID shows up as the WoW Launcher.exe).
How do I fix this?
Last edited by treyb on Wed Dec 14, 2011 10:52 pm; edited 1 time in total |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9677 Location: almost Mile High in the USA
|
Posted: Thu Dec 08, 2011 7:46 pm Post subject: |
|
|
Does running Wow.exe directly behave differently?
I've found that Launcher does not run very well sometimes... _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
treyb n00b
Joined: 20 Sep 2011 Posts: 51
|
Posted: Thu Dec 08, 2011 7:51 pm Post subject: |
|
|
Code: | ~/.wine/drive_c/Program Files/World of Warcraft $ wine Wow.exe
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 151 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 255
Current serial number in output stream: 255
|
I guess there is a error. I just have to run in command line. |
|
Back to top |
|
|
hasufell Retired Dev
Joined: 29 Oct 2011 Posts: 429
|
Posted: Thu Dec 08, 2011 7:52 pm Post subject: |
|
|
did you create a new wineprefix? i can imagine there might be stuff broken if you did not.
ATI is bad for wine btw. |
|
Back to top |
|
|
treyb n00b
Joined: 20 Sep 2011 Posts: 51
|
Posted: Thu Dec 08, 2011 8:00 pm Post subject: |
|
|
unfortunately ATI is all I have and I did not create a new anything. How do
I get it to work any ideas? |
|
Back to top |
|
|
hasufell Retired Dev
Joined: 29 Oct 2011 Posts: 429
|
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9677 Location: almost Mile High in the USA
|
Posted: Thu Dec 08, 2011 8:16 pm Post subject: |
|
|
Do you know if the opengl subsystem works, which is beyond basic X functionality?
ati-drivers installs fgl_glxgears which you can use to test the graphics system. Or try 'glxinfo' (part of x11-apps/mesa-progs).
Also might want to check out /var/log/Xorg.0.log to see if the graphics driver got initialized properly?
Are you using ati-drivers or xf86-video-ati (radeon)? I've only gotten the closed source ati-drivers working, not sure about the free one yet. _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
treyb n00b
Joined: 20 Sep 2011 Posts: 51
|
Posted: Thu Dec 08, 2011 8:30 pm Post subject: |
|
|
Code: | # glxinfo
name of display: :0
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 151 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12
# fgl_glxgears
Using GLX_SGIX_pbuffer
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 151 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12
|
However the log show no errors...... And I am using ati-drivers |
|
Back to top |
|
|
treyb n00b
Joined: 20 Sep 2011 Posts: 51
|
Posted: Fri Dec 09, 2011 1:09 am Post subject: |
|
|
I did everything here and it still doesnt run... Any ideas? |
|
Back to top |
|
|
hasufell Retired Dev
Joined: 29 Oct 2011 Posts: 429
|
Posted: Fri Dec 09, 2011 1:18 am Post subject: |
|
|
do other wine-games run? |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9677 Location: almost Mile High in the USA
|
Posted: Fri Dec 09, 2011 7:06 am Post subject: |
|
|
Definitely something wrong with the graphics/opengl subsystem at this point, not a wine issue I doubt...
treyb wrote: | However the log show no errors...... And I am using ati-drivers |
Is your opengl set properly?
eselect opengl set ati
Though this should cause lots of weird problems if it wasn't set... _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
treyb n00b
Joined: 20 Sep 2011 Posts: 51
|
Posted: Wed Dec 14, 2011 9:08 pm Post subject: |
|
|
Sorry I had a few things I had to do and wasnt able to get back until now.
Code: | eselect opengl list
Available OpenGL implementations:
[1] ati *
[2] xorg-x11
|
if it helps. The card is a ati sapphire x1650...
Code: | lspci | grep ATI
01:00.0 VGA compatible controller: ATI Technologies Inc RV535 [Radeon X1650 Series] (rev 9e)
01:00.1 Display controller: ATI Technologies Inc RV535 [Radeon X1650 Series] (rev 9e)
|
Code: | glxinfo
name of display: :0
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 151 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12 |
Code: | make.conf
VIDEO_CARDS="radeon"
|
Code: | cat /etc/X11/xorg.conf
Section "Module"
Disable "dri"
Disable "dri2"
Load "glx"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "RandRRotation" "true"
EndSection
Section "Monitor"
Identifier "Dell2208WFPT"
VendorName "Dell"
ModelName "2208WFPT"
Option "UseEDIDDPI" "False"
EndSection
Section "Screen"
Identifier "Screen 0"
Device "Card0"
Monitor "Dell2208WFPT"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Modes "1680x1050"
Depth 24
EndSubSection
EndSection
|
Code: | eselect profile list
Available profile symlink targets:
[1] default/linux/x86/10.0
[2] default/linux/x86/10.0/selinux
[3] default/linux/x86/10.0/desktop
[4] default/linux/x86/10.0/desktop/gnome
[5] default/linux/x86/10.0/desktop/kde *
[6] default/linux/x86/10.0/developer
[7] default/linux/x86/10.0/server
[8] hardened/linux/x86
[9] hardened/linux/x86/selinux
|
nothing with graphics runs at all although X starts up. |
|
Back to top |
|
|
lexming Tux's lil' helper
Joined: 04 Jan 2007 Posts: 123 Location: Barcelona
|
Posted: Wed Dec 14, 2011 11:45 pm Post subject: |
|
|
You should try with the ATI proprietary drivers instead. Playing games in wine with the open drivers can be very problematic. |
|
Back to top |
|
|
treyb n00b
Joined: 20 Sep 2011 Posts: 51
|
Posted: Thu Dec 15, 2011 1:27 am Post subject: |
|
|
I emerged the ati-drivers and x11-drivers/xf86-video-ati. Trying them each by their self to no avail. The card is is a gpu of R500 |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9677 Location: almost Mile High in the USA
|
Posted: Thu Dec 15, 2011 10:20 pm Post subject: |
|
|
I thought ATI dropped support of the R500 in fglrx, so you have to use xf86-video-ati (the OSS one). Last I tried my RV250 and R200 they worked sort of poorly on the OSS drivers, not sure how well the R500 works. Basically WoW was unplayable due to drawing problems... but it did get to the "login screen"... all black...
Make sure your eselect is correct for xf86-video-ati... _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
|