View previous topic :: View next topic |
Author |
Message |
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Tue Aug 16, 2011 1:43 pm Post subject: [USB3-DD] Taille disque incohérente |
|
|
Bonjour,
celà fait un moment que j'ai un disque USB3 et je souhaiterais m'en servir pour Linux.
Tout neuf, pour le moment rien n'a écrit dessus par moi-même.
Toutefois au montage du disque, il ne le reconnait avec une capacité que de 600Mo, or il fait 1To.
Voici ce que j'ai lorsque je le démonte
Code: | # dmesg | tail
[ 692.032622] sd 9:0:0:0: ioctl_internal_command return code = 8000002
[ 692.032623] : Sense Key : Aborted Command [current]
[ 692.032625] : Add. Sense: No additional sense information
[ 693.912684] hub 11-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 693.912696] hub 11-0:1.0: port 2, status 0100, change 0001, 5.0 Gb/s
[ 693.912698] usb 11-2: USB disconnect, device number 2
[ 693.912700] usb 11-2: unregistering device
[ 693.912702] usb 11-2: unregistering interface 11-2:1.0
[ 693.918097] usb 11-2: usb_disable_device nuking all URBs
[ 694.021877] hub 11-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 |
Et que je le monte
Code: | # dmesg | tail
[ 719.218168] : Add. Sense: No additional sense information
[ 719.220945] sd 10:0:0:0: ioctl_internal_command return code = 8000002
[ 719.220947] : Sense Key : Aborted Command [current]
[ 719.220949] : Add. Sense: No additional sense information
[ 719.221593] sd 10:0:0:0: ioctl_internal_command return code = 8000002
[ 719.221594] : Sense Key : Aborted Command [current]
[ 719.221596] : Add. Sense: No additional sense information
[ 719.225742] sd 10:0:0:0: ioctl_internal_command return code = 8000002
[ 719.225744] : Sense Key : Aborted Command [current]
[ 719.225746] : Add. Sense: No additional sense information |
Un lsusb me donne ceci
Code: | Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 002 Device 002: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
Bus 005 Device 002: ID 060b:6220 Solid Year
Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 011 Device 003: ID 0411:0180 MelCo., Inc | .
Le formater via l'assistant ne fonctionne pas.
Que puis-je faire pour que mon disque USB3 soit reconnu partout avec une taille cohérente ?
Merci d'avance pour vos conseils.
Cordialement,
Spy20 |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Tue Aug 16, 2011 1:49 pm Post subject: |
|
|
J'ai ceci comme autre information
Code: | [ 716.790618] usb 11-2: udev 3, busnum 11, minor = 1282
[ 716.790620] usb 11-2: New USB device found, idVendor=0411, idProduct=0180
[ 716.790622] usb 11-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 716.790623] usb 11-2: Product: HD-HXU3
[ 716.790624] usb 11-2: Manufacturer: BUFFALO
[ 716.790626] usb 11-2: SerialNumber: 000001044C74
[ 716.790698] usb 11-2: usb_probe_device
[ 716.790701] usb 11-2: configuration #1 chosen from 1 choice
[ 716.790968] usb 11-2: Successful Endpoint Configure command
[ 716.791122] usb 11-2: adding 11-2:1.0 (config #1, interface 0)
[ 716.791151] usb-storage 11-2:1.0: usb_probe_interface
[ 716.791156] usb-storage 11-2:1.0: usb_probe_interface - got id
[ 716.791196] scsi10 : usb-storage 11-2:1.0
[ 716.791257] drivers/usb/core/inode.c: creating file '003'
[ 719.012828] scsi 10:0:0:0: Direct-Access BUFFALO HD-HXU3 0100 PQ: 0 ANSI: 5
[ 719.013275] sd 10:0:0:0: Attached scsi generic sg6 type 0
[ 719.013502] sd 10:0:0:0: [sdf] 1331200 512-byte logical blocks: (681 MB/650 MiB)
[ 719.013620] xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
[ 719.014018] sd 10:0:0:0: [sdf] Write Protect is on
[ 719.014020] sd 10:0:0:0: [sdf] Mode Sense: 37 00 80 08
[ 719.014022] sd 10:0:0:0: [sdf] Assuming drive cache: write through
[ 719.014178] scsi: killing requests for dead queue
[ 719.016298] sd 10:0:0:0: ioctl_internal_command return code = 8000002
[ 719.016299] : Sense Key : Aborted Command [current]
[ 719.016301] : Add. Sense: No additional sense information
[ 719.016384] scsi: killing requests for dead queue
[ 719.016508] scsi: killing requests for dead queue
[ 719.016620] xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
[ 719.017008] sd 10:0:0:0: [sdf] Assuming drive cache: write through
[ 719.100775] sdf: sdf1
[ 719.101366] sd 10:0:0:0: ioctl_internal_command return code = 8000002
[ 719.101367] : Sense Key : Aborted Command [current]
[ 719.101369] : Add. Sense: No additional sense information
[ 719.101804] xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
[ 719.102256] sd 10:0:0:0: [sdf] Assuming drive cache: write through
[ 719.102259] sd 10:0:0:0: [sdf] Attached SCSI removable disk
[ 719.105215] sd 10:0:0:0: ioctl_internal_command return code = 8000002
[ 719.105217] : Sense Key : Aborted Command [current]
[ 719.105219] : Add. Sense: No additional sense information
|
Pourtant au niveau du noyau j'ai activé l'USB3, je vais re-checker mon noyau
En USB2 il me fait la même blague
J'ai xHCI USB3.0 d'activer dans le biois.
Il me manquerait autre chose ? |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Tue Aug 16, 2011 3:18 pm Post subject: |
|
|
En fait depuis Windows ça fonctionne après exécution de l'utilitaire de Buffalo.
Suite à l'exécution il demande un mot de passe. Et après validation j'ai un disque de 930Go (il me semble de monter)
Or depuis Linux rien du tout.
Qui aurait des idées à partager ? |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Tue Aug 16, 2011 6:21 pm Post subject: |
|
|
J'ai essayé avec Wine, les soft de Windows se lancent mais n'aboutissent pas OK.
J'ai demandé un support à Buffalo, mais me répondent qu'ils ne m'aideront pas mon soucis de compatibility avec Linux.
Avez-vous des idées ? |
|
Back to top |
|
|
oxomichael Tux's lil' helper
Joined: 05 Aug 2005 Posts: 87 Location: Loin de chez moi
|
Posted: Tue Aug 16, 2011 6:54 pm Post subject: |
|
|
Quel est la version du noyau ? _________________ Gigabyte MA790GP-DS4H - Phenon X4 955 - 4Go
3.0 - ~amd64
Gigabyte MA770T-UD3P - Athlon II X2 240 - 4Go
2.6.38 - ~amd64 |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Tue Aug 16, 2011 6:59 pm Post subject: |
|
|
Re,
merci de ton intervention
Voici les infos de mon noyau
Code: | Linux spy20 2.6.39-gentoo-r1 #4 SMP Sat Jul 9 20:28:03 CEST 2011 x86_64 Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz GenuineIntel GNU/Linux |
J'envisage de passer à la version 3 mais pas de suite.
J'ai vraiment l'impression que le soucis est lié au mot de passe que demande Buffalo mais impossible de le réinitialiser.
Le disque est découpé en deux partitions.
Les datas et 600Mo d'applications Buffalo.
Cette dernière est protégée en écriture. |
|
Back to top |
|
|
oxomichael Tux's lil' helper
Joined: 05 Aug 2005 Posts: 87 Location: Loin de chez moi
|
Posted: Tue Aug 16, 2011 7:06 pm Post subject: |
|
|
Ok la version semble suffisante
Franchement j’essaierai d’initialiser moi même le disque et supprimant toutes les partitions et en le formatant à partir de Linux
Tu peut toujours faire une sauvegarde du disque avant.
Si tu veut l'utiliser sous Windows et Linux, il va peut être falloir un système de fichier comme NTFS..... _________________ Gigabyte MA790GP-DS4H - Phenon X4 955 - 4Go
3.0 - ~amd64
Gigabyte MA770T-UD3P - Athlon II X2 240 - 4Go
2.6.38 - ~amd64 |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Tue Aug 16, 2011 7:10 pm Post subject: |
|
|
Re,
c'était bien mon idée.
J'ai commencé par sauvegarder mes données à part.
Mais comment vois-tu la chose.
Un Fdisk sur le disque ?
Un dd ?
Autre chose de mieux ? |
|
Back to top |
|
|
oxomichael Tux's lil' helper
Joined: 05 Aug 2005 Posts: 87 Location: Loin de chez moi
|
Posted: Tue Aug 16, 2011 7:15 pm Post subject: |
|
|
Je connais pas l'utilité des applications fournies....
Et ce que tu veut faire du disque
Mais une belle partition d'1To avec fdisk et le formatage qui va bien ça parait pas mal
Enfin bon pour sauvegarder il faut peut être un dd mais ça j'en sais rien...c'est a toi de voir j’achète toujours des disques nu _________________ Gigabyte MA790GP-DS4H - Phenon X4 955 - 4Go
3.0 - ~amd64
Gigabyte MA770T-UD3P - Athlon II X2 240 - 4Go
2.6.38 - ~amd64 |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Tue Aug 16, 2011 7:41 pm Post subject: |
|
|
Ok je test dés que je peux et je ferais un retour
Merci à toi |
|
Back to top |
|
|
man in the hill Veteran
Joined: 15 Dec 2005 Posts: 1552 Location: Madinina
|
Posted: Tue Aug 16, 2011 11:36 pm Post subject: |
|
|
Salut,
+1 pour le formatage. Windows pour le formatage ntfs de préférence ... _________________ Get Up and Go ! |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Wed Aug 17, 2011 3:43 am Post subject: |
|
|
man in the hill wrote: | Salut,
+1 pour le formatage. Windows pour le formatage ntfs de préférence ... |
Que veux-tu dire :
- lancer le formatage depuis Windows (ça ne marche pas) ?
- formater ne NTFS (je pensais à du FAT32, car je pourrais pas vraiment écrire sur du NTFS) ? |
|
Back to top |
|
|
nonas Guru
Joined: 17 Apr 2005 Posts: 328
|
Posted: Wed Aug 17, 2011 6:20 am Post subject: |
|
|
L'écriture sur NTFS depuis Linux est fiable depuis quelques temps déjà.
Je ferais tout depuis Linux pour ma part, création des partitions et des systèmes de fichiers.
edit : intéressant de voir que Buffalo se contrefiche de ses clients sous Linux, encore une marque à ne pas recommander... |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Wed Aug 17, 2011 1:42 pm Post subject: |
|
|
Je comprends pas comment le "second" disque puisse apparâitre uniquement après une bonne saisie de mot de passe
Je ne peux faire de partitionnement ou formatage car le seul disque que je vois est le suivant
Code: | # fdisk /dev/sdf1
Commande (m pour l'aide): p
Disque /dev/sdf1 : 681 Mo, 681558016 octets
64 têtes, 32 secteurs/piste, 649 cylindres, total 1331168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x00000000
Périphérique Amorce Début Fin Blocs Id Système
|
|
|
Back to top |
|
|
Poussin l33t
Joined: 08 Jun 2007 Posts: 659 Location: Liège
|
Posted: Wed Aug 17, 2011 1:49 pm Post subject: |
|
|
Que donne
? |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Wed Aug 17, 2011 2:23 pm Post subject: |
|
|
Poussin wrote: | Que donne
? |
Mon dmesg
Code: | [87172.213880] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002
[87172.213887] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[87172.213893] hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
[87172.317209] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
[87172.368412] ehci_hcd 0000:00:1d.7: port 1 high speed
[87172.368416] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[87172.419181] usb 2-1: new high speed USB device number 3 using ehci_hcd
[87172.470384] ehci_hcd 0000:00:1d.7: port 1 high speed
[87172.470388] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[87172.533249] ehci_hcd 0000:00:1d.7: set dev address 3 for port 1
[87172.533253] ehci_hcd 0000:00:1d.7: LPM: no device attached
[87172.533623] usb 2-1: default language 0x0409
[87172.533997] usb 2-1: udev 3, busnum 2, minor = 130
[87172.533999] usb 2-1: New USB device found, idVendor=0411, idProduct=0180
[87172.534000] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[87172.534002] usb 2-1: Product: HD-HXU3
[87172.534003] usb 2-1: Manufacturer: BUFFALO
[87172.534004] usb 2-1: SerialNumber: 000001044C74
[87172.534060] usb 2-1: usb_probe_device
[87172.534062] usb 2-1: configuration #1 chosen from 1 choice
[87172.534124] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[87172.534154] usb-storage 2-1:1.0: usb_probe_interface
[87172.534159] usb-storage 2-1:1.0: usb_probe_interface - got id
[87172.534201] scsi16 : usb-storage 2-1:1.0
[87172.534273] drivers/usb/core/inode.c: creating file '003'
[87178.621231] scsi 16:0:0:0: Direct-Access BUFFALO HD-HXU3 0100 PQ: 0 ANSI: 5
[87178.621338] sd 16:0:0:0: Attached scsi generic sg6 type 0
[87178.621849] sd 16:0:0:0: [sdf] 1331200 512-byte logical blocks: (681 MB/650 MiB)
[87178.622595] sd 16:0:0:0: [sdf] Write Protect is on
[87178.622598] sd 16:0:0:0: [sdf] Mode Sense: 37 00 80 08
[87178.622600] sd 16:0:0:0: [sdf] Assuming drive cache: write through
[87178.625967] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.625969] : Sense Key : Aborted Command [current]
[87178.625972] : Add. Sense: No additional sense information
[87178.627341] sd 16:0:0:0: [sdf] Assuming drive cache: write through
[87178.719580] sdf: sdf1
[87178.720568] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.720570] : Sense Key : Aborted Command [current]
[87178.720572] : Add. Sense: No additional sense information
[87178.722196] sd 16:0:0:0: [sdf] Assuming drive cache: write through
[87178.722199] sd 16:0:0:0: [sdf] Attached SCSI removable disk
[87178.759814] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.759817] : Sense Key : Aborted Command [current]
[87178.759820] : Add. Sense: No additional sense information
[87178.829044] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.829046] : Sense Key : Aborted Command [current]
[87178.829048] : Add. Sense: No additional sense information
[87178.885772] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.885774] : Sense Key : Aborted Command [current]
[87178.885776] : Add. Sense: No additional sense information
[87178.887019] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.887021] : Sense Key : Aborted Command [current]
[87178.887023] : Add. Sense: No additional sense information
[87178.888521] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.888522] : Sense Key : Aborted Command [current]
[87178.888524] : Add. Sense: No additional sense information
[87178.889142] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.889143] : Sense Key : Aborted Command [current]
[87178.889145] : Add. Sense: No additional sense information
[87178.890020] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.890021] : Sense Key : Aborted Command [current]
[87178.890023] : Add. Sense: No additional sense information
[87178.929009] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.929011] : Sense Key : Aborted Command [current]
[87178.929013] : Add. Sense: No additional sense information
[87178.931510] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.931512] : Sense Key : Aborted Command [current]
[87178.931514] : Add. Sense: No additional sense information
[87178.932757] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.932759] : Sense Key : Aborted Command [current]
[87178.932761] : Add. Sense: No additional sense information
[87178.937633] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.937635] : Sense Key : Aborted Command [current]
[87178.937637] : Add. Sense: No additional sense information
[87178.984493] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.984496] : Sense Key : Aborted Command [current]
[87178.984498] : Add. Sense: No additional sense information
[87178.987618] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.987620] : Sense Key : Aborted Command [current]
[87178.987622] : Add. Sense: No additional sense information
[87178.988867] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.988868] : Sense Key : Aborted Command [current]
[87178.988870] : Add. Sense: No additional sense information
[87178.993621] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87178.993624] : Sense Key : Aborted Command [current]
[87178.993626] : Add. Sense: No additional sense information
[87179.030357] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87179.030359] : Sense Key : Aborted Command [current]
[87179.030361] : Add. Sense: No additional sense information
[87179.033856] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87179.033858] : Sense Key : Aborted Command [current]
[87179.033860] : Add. Sense: No additional sense information
[87179.035111] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87179.035112] : Sense Key : Aborted Command [current]
[87179.035114] : Add. Sense: No additional sense information
[87179.153951] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87179.153952] : Sense Key : Aborted Command [current]
[87179.153955] : Add. Sense: No additional sense information
[87179.154947] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87179.154949] : Sense Key : Aborted Command [current]
[87179.154951] : Add. Sense: No additional sense information
[87179.155955] sd 16:0:0:0: ioctl_internal_command return code = 8000002
[87179.155957] : Sense Key : Aborted Command [current]
[87179.155960] : Add. Sense: No additional sense information
[87181.867864] CPU7: Core temperature above threshold, cpu clock throttled (total events = 630252)
[87181.867867] CPU3: Core temperature above threshold, cpu clock throttled (total events = 630254)
[87181.869925] CPU7: Core temperature/speed normal
[87181.869927] CPU3: Core temperature/speed normal
[87253.297443] CPU2: Core temperature above threshold, cpu clock throttled (total events = 382474)
[87253.297446] CPU6: Core temperature above threshold, cpu clock throttled (total events = 382474)
[87253.298476] CPU2: Core temperature/speed normal
[87253.298477] CPU6: Core temperature/speed normal
[87366.965902] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002
[87366.965910] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001002 0 ACK POWER sig=se0 CSC
[87366.965916] hub 2-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
[87366.965918] usb 2-1: USB disconnect, device number 3
[87366.965919] usb 2-1: unregistering device
[87366.965921] usb 2-1: unregistering interface 2-1:1.0
[87366.980297] usb 2-1: usb_disable_device nuking all URBs
[87367.084065] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
|
Et fdisk
Code: |
spy20 / # fdisk -l /dev/sdf1
Disque /dev/sdf1 : 681 Mo, 681558016 octets
64 têtes, 32 secteurs/piste, 649 cylindres, total 1331168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x00000000
Périphérique Amorce Début Fin Blocs Id Système
spy20 / # fdisk -l /dev/sdf
Disque /dev/sdf : 681 Mo, 681574400 octets
64 têtes, 32 secteurs/piste, 650 cylindres, total 1331200 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xd484d064
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdf1 32 1331199 665584 b W95 FAT32
|
Contenu des sd*
Code: | spy20 / # fdisk /dev/sd
sda sda2 sda4 sdb1 sdb3 sdc sdc2 sdc4 sdd1 sde sdf1
sda1 sda3 sdb sdb2 sdb4 sdc1 sdc3 sdd sdd2 sdf
spy20 / # fdisk /dev/sde
fdisk: impossible d'ouvrir /dev/sde: Aucun medium trouvé
|
sd[a-d][1-4] étant mes RAIDS |
|
Back to top |
|
|
Poussin l33t
Joined: 08 Jun 2007 Posts: 659 Location: Liège
|
Posted: Wed Aug 17, 2011 6:37 pm Post subject: |
|
|
Ca c'est louche.
Le "controleur" Buffalomachin cacherait certaines chose à ce point là? Je pense que ce n'est pas gagné... |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Wed Aug 17, 2011 7:34 pm Post subject: |
|
|
Poussin wrote: | Ca c'est louche.
Le "controleur" Buffalomachin cacherait certaines chose à ce point là? Je pense que ce n'est pas gagné... |
J'en ai l'impression et ça me désole à un point.
Je n'arrive pas à supprimmer ce blocage depuis Windows.
Wine n'arrive pas à faire fonctionner les soft Buffalo jusqu'à leur terme.
Le support officiel ne me donne pas de réponse?
Je ne comprends pas comme by-passer ce problème.
Je suis ouvert à toutes les propositions.
(Je n'ai pas trouvé comme ouvrir le disque) |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Wed Aug 17, 2011 8:26 pm Post subject: |
|
|
J'ai réinitialisé le mot de passe depuis Windows.
Mais je suis toujours bloqué depuis Linux
Je fais pas le fier d'avoir acheté ce disque |
|
Back to top |
|
|
oxomichael Tux's lil' helper
Joined: 05 Aug 2005 Posts: 87 Location: Loin de chez moi
|
Posted: Thu Aug 18, 2011 6:44 am Post subject: |
|
|
Quel est le modèle de ton disque dur ?
Dans quelques documentations, il y a marqué cela
* Secure Lock Mobile for Windows® PC encrypts your data preventing unauthorised access
Est ce qu'il n'y aurait pas un logiciel (sous windows) qui permettrait de supprimer complétement l'encryption et ne pas l'utiliser _________________ Gigabyte MA790GP-DS4H - Phenon X4 955 - 4Go
3.0 - ~amd64
Gigabyte MA770T-UD3P - Athlon II X2 240 - 4Go
2.6.38 - ~amd64 |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Thu Aug 18, 2011 7:18 am Post subject: |
|
|
oxomichael wrote: | Quel est le modèle de ton disque dur ?
Dans quelques documentations, il y a marqué cela
* Secure Lock Mobile for Windows® PC encrypts your data preventing unauthorised access
Est ce qu'il n'y aurait pas un logiciel (sous windows) qui permettrait de supprimer complétement l'encryption et ne pas l'utiliser |
Voici mon type de DD en version 1To
http://www.buffalo-technology.com/products/external-drives/drivestation/hd-hxu3-drivestation-usb-30/
Concernant le soft oui j'ai essayé depuis Windows, mais je n'ai pas constaté de différence après sur Linux.
Dans le disque qui est monté, il y a un dossier Windows\TOOLS dans lequel il y a justement des utilitaire pour le cryptage et la sécurisation des datas. |
|
Back to top |
|
|
nonas Guru
Joined: 17 Apr 2005 Posts: 328
|
Posted: Thu Aug 18, 2011 10:30 am Post subject: |
|
|
As-tu essayé avec d'autres outils de partitionnement ? parted ou TestDisk par exemple. |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Thu Aug 18, 2011 10:32 am Post subject: |
|
|
non mais je pense que se sera pareil car j'ai rien de mieux depuis Windows |
|
Back to top |
|
|
spy20 Tux's lil' helper
Joined: 02 Nov 2010 Posts: 140
|
Posted: Thu Aug 18, 2011 5:15 pm Post subject: |
|
|
Ahhh ça m'agace comme soucis.
J'ai essayé avec Parted, et je ne vois rien de mieux.
Depuis Windows si j'indique au soft de ne pas prendre le mot de passe ou une authentification direct, cela marche bien depuis Windows.
Mais uniquement depuis Windows.
Sur Linux j'ai toujours que mon premier disque de monté rrrr
J'ai fais une recherche sur Windows concernant les fichiers les plus récente et je ne trouve rien qui peut avoir un rapport avec BUFFALO |
|
Back to top |
|
|
Poussin l33t
Joined: 08 Jun 2007 Posts: 659 Location: Liège
|
Posted: Thu Aug 18, 2011 5:26 pm Post subject: |
|
|
Dans le gestionnaire de disque winwin, tu vois plusieurs partoches? De quelles tailles? |
|
Back to top |
|
|
|