View previous topic :: View next topic |
Author |
Message |
domx n00b
Joined: 01 Dec 2010 Posts: 60
|
Posted: Sun Jun 05, 2011 2:01 pm Post subject: Gentoo non parte |
|
|
Salve ragazzi, scusate se apro un altro topic ma sto avendo un po' di problemi nell'installazione di gento...
ora quando le faccio fare il boot, inizia a caricare ma a un certo punto rimane fermo su "starting local" e si blocca così.
Secondo voi a cosa può essere dovuto? Ho seguito la guida passo per passo, i file di configurazione dovrebbero essere tutti a posto..
ciao e grazie in anticipo |
|
Back to top |
|
|
domx n00b
Joined: 01 Dec 2010 Posts: 60
|
Posted: Sun Jun 05, 2011 5:36 pm Post subject: |
|
|
nessuno mi saprebbe aiutare? |
|
Back to top |
|
|
bi-andrea Apprentice
Joined: 09 Mar 2010 Posts: 171 Location: cesenatico
|
Posted: Sun Jun 05, 2011 5:59 pm Post subject: |
|
|
Per aiutarti io ho bisogno per esempio sapere com'è scritto /etc/fstab e /boot/grub/menu.lst
il kernel come lo hai creato usando genkernel o te lo sei complitato tu?
Quanti dischi usi? _________________ Quando arrivi a Linux è un trauma, abituati a Windows, quando arrivi a Gentoo è uno spavento col brivido , però quando lo capisci sei uscito dall'università "GNU/Linux" |
|
Back to top |
|
|
darkmanPPT Veteran
Joined: 13 Apr 2006 Posts: 1069 Location: vi/bo
|
Posted: Sun Jun 05, 2011 6:15 pm Post subject: |
|
|
sappi che dentro /var/log/
ci sono un po' di log di sistema.
ad esempio, dopo aver riscontrato tale problema, reboota con il cd di gentoo (o qualsiasi altro tu abbia). monta la partizione e vai a vedere i log di sistema cosa ti dicono.
ad esempio: messages e dmesg dovrebbero darti informazioni importanti.
posta qui le ultime righe. vediam di che errore si tratta. _________________ Darkman |
|
Back to top |
|
|
domx n00b
Joined: 01 Dec 2010 Posts: 60
|
Posted: Sun Jun 05, 2011 6:50 pm Post subject: |
|
|
ecco a voi:
Code: | # /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed); notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
#/dev/BOOT /boot ext2 noauto,noatime 1 2
/dev/sda7 / ext3 noatime 0 1
#/dev/SWAP none swap sw 0 0
/dev/cdrom /mnt/cdrom auto noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
proc /proc proc defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
|
uso il grub di fedora per caricarla:
Code: | # grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,0)
# kernel /boot/vmlinuz-version ro root=/dev/sda1
# initrd /boot/initrd-[generic-]version.img
#boot=/dev/sda
default=0
timeout=3
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
#hiddenmenu
title Fedora (2.6.38.6-27.fc15.i686)
root (hd0,0)
kernel /boot/vmlinuz-2.6.38.6-27.fc15.i686 ro root=UUID=8b85921d-6b89-4f34-8429-54e4cfd037e4 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=it_IT.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=it rhgb quiet
initrd /boot/initramfs-2.6.38.6-27.fc15.i686.img
title Microsoft Windows
root (hd0,1)
savedefault
makeactive
chainloader
title Linux Mint
root (hd0,4)
kernel /boot/vmlinuz-2.6.38-2-686 ro root=/dev/sda5
initrd /boot/initrd.img-2.6.38-2-686
title Gentoo
root (hd0,6)
kernel /boot/kernel-genkernel-x86-2.6.38-gentoo-r6 root=/dev/sda7
initrd /boot/initramfs-genkernel-x86-2.6.38-gentoo-r6
|
ho un solo disco e gentoo è installato in /dev/sda7
ultime righe /var/log/messages:
Code: | Jun 5 14:18:41 localhost agetty[9647]: /dev/tty2: not a character device
Jun 5 14:18:41 localhost agetty[9646]: /dev/tty4: not a character device
Jun 5 14:18:51 localhost agetty[9648]: /dev/tty3: not a character device
Jun 5 14:18:51 localhost agetty[9649]: /dev/tty6: not a character device
Jun 5 14:18:51 localhost agetty[9650]: /dev/tty5: not a character device
Jun 5 14:18:51 localhost agetty[9651]: /dev/tty1: not a character device
Jun 5 14:18:51 localhost agetty[9652]: /dev/tty2: not a character device
Jun 5 14:18:51 localhost agetty[9653]: /dev/tty4: not a character device
Jun 5 14:19:01 localhost agetty[9655]: /dev/tty6: not a character device
Jun 5 14:19:01 localhost agetty[9654]: /dev/tty3: not a character device
Jun 5 14:19:01 localhost agetty[9656]: /dev/tty5: not a character device
Jun 5 14:19:01 localhost agetty[9657]: /dev/tty1: not a character device
Jun 5 14:19:01 localhost agetty[9658]: /dev/tty2: not a character device
Jun 5 14:19:01 localhost agetty[9659]: /dev/tty4: not a character device
Jun 5 14:19:11 localhost agetty[9660]: /dev/tty6: not a character device
Jun 5 14:19:11 localhost agetty[9662]: /dev/tty1: not a character device
Jun 5 14:19:11 localhost agetty[9661]: /dev/tty3: not a character device
Jun 5 14:19:11 localhost agetty[9663]: /dev/tty5: not a character device
Jun 5 14:19:11 localhost agetty[9665]: /dev/tty4: not a character device
Jun 5 14:19:11 localhost agetty[9664]: /dev/tty2: not a character device
Jun 5 14:19:21 localhost agetty[9666]: /dev/tty6: not a character device
Jun 5 14:19:21 localhost agetty[9667]: /dev/tty1: not a character device
Jun 5 14:19:21 localhost agetty[9668]: /dev/tty3: not a character device
Jun 5 14:19:21 localhost agetty[9669]: /dev/tty5: not a character device
Jun 5 14:19:21 localhost agetty[9670]: /dev/tty4: not a character device
Jun 5 14:19:21 localhost agetty[9671]: /dev/tty2: not a character device
Jun 5 14:19:31 localhost agetty[9672]: /dev/tty6: not a character device
Jun 5 14:19:31 localhost agetty[9673]: /dev/tty1: not a character device
Jun 5 14:19:31 localhost agetty[9674]: /dev/tty5: not a character device
Jun 5 14:19:31 localhost agetty[9676]: /dev/tty4: not a character device
Jun 5 14:19:31 localhost agetty[9675]: /dev/tty3: not a character device
Jun 5 14:19:31 localhost agetty[9677]: /dev/tty2: not a character device
Jun 5 14:19:41 localhost init: Id "c6" respawning too fast: disabled for 5 minutes
Jun 5 14:19:41 localhost init: Id "c1" respawning too fast: disabled for 5 minutes
Jun 5 14:19:41 localhost init: Id "c5" respawning too fast: disabled for 5 minutes
Jun 5 14:19:41 localhost init: Id "c4" respawning too fast: disabled for 5 minutes
Jun 5 14:19:41 localhost init: Id "c3" respawning too fast: disabled for 5 minutes
Jun 5 14:19:41 localhost init: Id "c2" respawning too fast: disabled for 5 minutes
Jun 5 14:19:41 localhost init: no more processes left in this runlevel
|
ultime righe /var/log/dmegs:
Code: | Registering the dns_resolver key type
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 456k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Refined TSC clocksource calibration: 2399.970 MHz.
Switching to clocksource tsc
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
ata1.01: NODEV after polling detection
ata1.00: ATAPI: HL-DT-ST DVD-RAM GH10L, FC09, max UDMA/100
ata2.00: ATA-8: SAMSUNG HD320KJ, CP100-12, max UDMA7
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH10L FC09 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD320KJ CP10 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 1:0:0:0: [sda] Attached SCSI disk
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
NCR53c406a: no available ports found
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
NCR53c406a: no available ports found
imm: Version 2.05 (for Linux 2.4.0)
sym53c416.c: Version 1.0.0-ac
Fusion MPT base driver 3.04.18
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.18
Fusion MPT FC Host driver 3.04.18
Fusion MPT SAS Host driver 3.04.18
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.1-5[26400]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.05.29-rc1 Tue. Dec. 7 17:00:00 PDT 2010
QLogic Fibre Channel HBA Driver: 8.03.05-k0
Emulex LightPulse Fibre Channel SCSI driver 8.3.20
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
scsi4 : usb-storage 1-1:1.0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
fuse init (API version 7.16)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:1: Attached scsi generic sg3 type 0
sd 4:0:0:2: Attached scsi generic sg4 type 0
sd 4:0:0:3: Attached scsi generic sg5 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:3: [sde] Attached SCSI removable disk
EXT2-fs (sda7): warning: mounting ext3 filesystem as ext2
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
|
grazie
P.S.: ah, ho usato genkernel... |
|
Back to top |
|
|
darkmanPPT Veteran
Joined: 13 Apr 2006 Posts: 1069 Location: vi/bo
|
Posted: Sun Jun 05, 2011 9:19 pm Post subject: |
|
|
mi pare di capire quindi che non siano problemi con il kernel.
mi pare di capire che tutto si carica senza problemi o errori di ogni genere e l'unica cosa è dopo l'avvio di local non ti fa vedere il login.
uhm....
ma su che cosa gira la tua installazione di gentoo?
io cercando con google ho trovato questa cosa qui.
http://lists.xensource.com/archives/html/xen-users/2006-08/msg00924.html
non so se sia esattamente il tuo caso, ma sembra lo stesso identico tuo errore.
prova a vedere... _________________ Darkman |
|
Back to top |
|
|
karato n00b
Joined: 03 Jul 2011 Posts: 3
|
Posted: Tue Jul 05, 2011 9:08 pm Post subject: |
|
|
ciao,
ho avuto anche io questo problema...
se hai creato a parte la partizione di /boot devi montarci il Filesystem Ext2.
df -h e vedi se la partition-table è corretta...
prova a fare questo controllo e vedi come va..
bye bye |
|
Back to top |
|
|
pierino_89 Guru
Joined: 03 Oct 2009 Posts: 522
|
Posted: Sun Jul 10, 2011 2:52 am Post subject: |
|
|
Io vedo che non gli piacciono i device dei vari tty, quindi andando a naso /dev/ contiene roba non valida e probabilmente non parte udev. _________________ Linux registered user 461710 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|