View previous topic :: View next topic |
Author |
Message |
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Tue Jan 18, 2011 11:05 am Post subject: [xorg-1.9.3 & nvidia 260] Monitor "out of range&quo |
|
|
After an update to xorg-1.7 to 1.9 and nvidia-drivers-195 to 260, when I "startx"the monitor is out of range.
I tried to follow the upgrade guides xorg 1.8 and xorg 1.9 and now this is my [http://pastebin.com/6dVzcq5B]xorg.conf[/url]. I have also tried to leave only the "device" and is the same problem.
These are the configuration files and logs:
.config --> http://pastebin.com/mSBEz79L
xorg.conf --> http://pastebin.com/6dVzcq5B
/var/log/messages (tail -n 20) --> http://pastebin.com/zhK16889
make.conf --> http://pastebin.com/N9P3whQK
thanks in advance for your help and sorry for my english _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo"
Last edited by Theasker on Wed Mar 09, 2011 2:12 pm; edited 1 time in total |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Wed Jan 19, 2011 2:09 am Post subject: |
|
|
gives me an /etc/X11/xorg.conf: Quote: | # nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.nvidia.com) Wed Dec 8 12:27:39 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection | for a very similar 8600gt. suggest running _________________ Defund the FCC. |
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Wed Jan 19, 2011 7:40 pm Post subject: |
|
|
this is my file generated by nvidia-xconfig
Code: | # nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.nvidia.com) Wed Dec 8 12:27:39 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection |
but the result is the same , I do not know what happens _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo" |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Wed Jan 19, 2011 8:18 pm Post subject: |
|
|
Quote: | [*] Enable firmware EDID | May be all you need
Do you have a matrox video card as well as an nvidia card?
Make(s) and model(s) of monitors?
add udev policykit consolekit to USE= Code: |
emerge -uND world
emerge consolekit dbus hal policykit udev
rc-update add consolekit default
rc-update add dbus default
rc-update add hald default
rc-update add udev-postmount default
rc-update add udev sysinit #if openrc/baselayout2 |
Code: | cd /usr/src/linux;make menuconfig | edit menuconfig to:
Quote: | Graphics support --->
-*- /dev/agpgart (AGP Support) --->
--- /dev/agpgart (AGP Support)
< > AMD Opteron/Athlon64 on-CPU GART support
<*> Intel 440LX/BX/GX, I8xx and E7x05 chipset support
< > SiS chipset support
< > VIA chipset support
-*- VGA Arbitration
(2) Maximum number of GPUs
[ ] Laptop Hybrid Graphics - GPU switching support #* if you have laptop with two vga cards
< > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
<*> Lowlevel video output switch controls
<*> Support for frame buffer devices --->
--- Support for frame buffer devices
[*] Enable firmware EDID
[ ] Framebuffer foreign endianness support --->
-*- Enable Video Mode Handling Helpers
[*] Enable Tile Blitting Support
*** Frame buffer hardware drivers ***
< > Cirrus Logic support
< > Permedia2 support
< > CyberPro 2000/2010/5000 support
< > Arc Monochrome LCD board support
[ ] Asiliant (Chips) 69000 display support
[ ] IMS Twin Turbo display support
< > VGA 16-color graphics support
< > Userspace VESA VGA graphics support
[ ] VESA VGA graphics support
[ ] EFI-based Framebuffer Support
< > N411 Apollo/Hecuba devkit support
< > Hercules mono graphics support
< > Epson S1D13XXX framebuffer support
< > nVidia Framebuffer Support
< > nVidia Riva support
< > Intel LE80578 (Vermilion) support
< > Matrox acceleration
< > ATI Radeon display support
< > ATI Rage128 display support
< > ATI Mach64 display support
< > S3 Trio/Virge support
< > S3 Savage support
< > SiS/XGI display support
< > VIA UniChrome (Pro) and Chrome9 display support
< > NeoMagic display support
< > IMG Kyro support
< > 3Dfx Banshee/Voodoo3/Voodoo5 display support
< > 3Dfx Voodoo Graphics (sst1) support
< > VIA VT8623 support
< > Trident/CyberXXX/CyberBlade support
< > ARK 2000PV support
< > Permedia3 support (EXPERIMENTAL)
< > Fujitsu carmine frame buffer support
[ ] AMD Geode family framebuffer support (EXPERIMENTAL)
< > Virtual Frame Buffer support (ONLY FOR TESTING!)
< > E-Ink Metronome/8track controller support
< > Fujitsu MB862xx GDC support
< > E-Ink Broadsheet/Epson S1D13521 controller support
[*] Backlight & LCD device support --->
--- Backlight & LCD device support
< > Lowlevel LCD controls
-*- Lowlevel Backlight controls
<*> Generic (aka Sharp Corgi) Backlight Driver
< > Frontpath ProGear Backlight Driver
< > MacBook Pro Nvidia Backlight Driver
< > Tabletkiosk Sahara Touch-iT Backlight Driver
Display device support --->
Console display driver support --->
-*- VGA text console
*] Enable Scrollback Buffer in System RAM
(1024) Scrollback Buffer Size (in KB)
<*> Framebuffer Console support
[ ] Map the console to the primary display device
[ ] Framebuffer Console Rotation
[ ] Select compiled-in fonts
[*] Bootup logo --->
--- Bootup logo
[ ] Standard black and white Linux logo
[ ] Standard 16-color Linux logo
[*] Standard 224-color Linux logo | ensure /boot partition is mounted, recompile and recopy the kernel, Code: | emerge -av xorg-server $(qlist -IC x11-drivers)
nvidia-xconfig | If still fails Code: | wgetpaste /var/log/Xorg.0.log
lspci -k | wgetpaste | and post url's _________________ Defund the FCC. |
|
Back to top |
|
|
Anon-E-moose Watchman
Joined: 23 May 2008 Posts: 6095 Location: Dallas area
|
Posted: Wed Jan 19, 2011 8:27 pm Post subject: |
|
|
Post your /var/log/Xorg.0.log _________________ PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Thu Jan 20, 2011 6:44 pm Post subject: |
|
|
I have a hp proliant 110 g5 which has a 32-Gb matrox integrated and I've put a nvidia GeForce 8400 GS PCI-express x1 slot into a x8 PCI-express, but it works perfectly. My intention is to use a monitor on each card and tv out nvidia for the tv, but that when runnin
The monitors are:
The main --> HITACHI CRT cm813ET Plus 21 inch. --> nvidia
The second --> ACER LCD 19 inch. (until it works without using any) --> matrox
after updating the kernel options i replaced the new kernel y boot partition and I restarted.
Code: | emerge -va consolekit dbus hal policykit udev
rc-status default
rc-update add consolekit default
rc-update add dbus default
/etc/init.d/consolekit start
/etc/init.d/dbus start
cd /usr/src/linux
make menuconfig
make && make modules_install
mount /boot
cp arch/x86_64/boot/bzImage /boot/gentoo-2.6.36-r5
reboot
nvidia-xconfig
#login with the normal user
startx |
/var/log/Xorg.0.log
lspci -k _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo" |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Fri Jan 21, 2011 4:26 am Post subject: |
|
|
looks like the crt does not provide edid info, suggest connecting acer monitor to the nvidia card running nvidia-xconfig and testing. xorg log looks ok to me. _________________ Defund the FCC. |
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Sat Jan 22, 2011 9:23 am Post subject: |
|
|
xorg log
xorg.conf generated by nevidia-xconfig
thx again in advance _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo" |
|
Back to top |
|
|
gerard27 Advocate
Joined: 04 Jan 2004 Posts: 2377 Location: Netherlands
|
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Sat Jan 22, 2011 3:50 pm Post subject: |
|
|
my card has vga out and s-video output, no DVI or anything, so I connect my monitor to the only possible solution.
This is my card _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo" |
|
Back to top |
|
|
gerard27 Advocate
Joined: 04 Jan 2004 Posts: 2377 Location: Netherlands
|
Posted: Sat Jan 22, 2011 3:59 pm Post subject: |
|
|
Well then I don't know how to solve your problem.
Sorry.
Gerard. _________________ To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download |
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Tue Jan 25, 2011 1:34 pm Post subject: |
|
|
I searched for a distribution of Linux that have xorg-server 1.9.3 and nvidia-drivers 260 and I tested 2, SystemRescue (xorg-server 1.9.3 + nouveau) and chakra (xorg-server 1.9.3 + nvidia-drivers 260) and X in SystemRescue work perfectly with the free nouveau driver but when you start distributing chakra same thing happens on my computer.
This proves what I believe is that the nvidia driver 260 has some kind of bug with my card. _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo" |
|
Back to top |
|
|
Matteo Azzali Retired Dev
Joined: 23 Sep 2004 Posts: 1133
|
Posted: Thu Jan 27, 2011 7:30 pm Post subject: |
|
|
I have the same exact issue of acer screen not finding resolution, but checking dmesg I found also :
Code: |
an 27 19:54:24 galaxy kernel: [ 10.921694] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.29 Wed Dec 8 12:08:56 PST 2010
Jan 27 19:54:31 galaxy kernel: [ 22.259657] NVRM: API mismatch: the client has the version 260.19.36, but
Jan 27 19:54:31 galaxy kernel: [ 22.259659] NVRM: this kernel module has the version 260.19.29. Please
Jan 27 20:01:28 galaxy kernel: [ 11.009018] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.29 Wed Dec 8 12:08:56 PST 2010
|
rollbacking worked so I'll cross my finger for a fixing update (I'm using a laptop so there's no way to change screen).
Do you happens to have the same message in dmesg? Anyone knows if it's related and/or useful? _________________ Every day a new distro comes to birth. Every day a distro "eats" another.
If you're born distro, no matter what, start to run.
---- http://www.linuxprinting.org/ ---- http://tuxmobil.org/ |
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Fri Jan 28, 2011 1:17 pm Post subject: |
|
|
this is my dmesg _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo" |
|
Back to top |
|
|
Matteo Azzali Retired Dev
Joined: 23 Sep 2004 Posts: 1133
|
Posted: Tue Feb 01, 2011 7:42 am Post subject: |
|
|
Found the thing (here)!!
I rechecked emerge logs and noticed there was an issue with portage not founding System.map in my
/usr/src/linux dir, so I recompiled the kernel from start and this time nvidia-drivers-xxx.36 version got added to moduledb and
everything is starting, so it looks that in my case the "monitor out of range" one was not the real issue but just a consequence of
a module not being loaded. _________________ Every day a new distro comes to birth. Every day a distro "eats" another.
If you're born distro, no matter what, start to run.
---- http://www.linuxprinting.org/ ---- http://tuxmobil.org/ |
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Tue Feb 01, 2011 11:20 am Post subject: |
|
|
Will review all options in my kernel xx.36, but not if I know where the error if any, and rebuild it again, but I've done this several times, but it's okay to try again.
Thanks for the help _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo" |
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Sat Feb 05, 2011 8:16 pm Post subject: |
|
|
All is ok but with nouveau and 1024x768 only.
This is my xorg.conf _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo" |
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
Posted: Mon Feb 07, 2011 9:46 am Post subject: |
|
|
in xorg.0.log are some lines
Code: |
[ 51.989] (II) NOUVEAU(0): Not using mode "1600x1200" (hsync out of range)
.....
[ 51.990] (II) NOUVEAU(0): Not using default mode "1600x1200" (unknown reason) |
another
but always I've used this resolution:
1600 x 1200 with 110 Mhz
How I can always have my resolution? _________________ "Oigo y olvido. Veo y recuerdo. Hago y comprendo" |
|
Back to top |
|
|
Theasker l33t
Joined: 18 Nov 2006 Posts: 656 Location: Zaragoza (Spain)
|
|
Back to top |
|
|
|