Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Missing ucodes + wireless
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
gmunk
n00b
n00b


Joined: 14 Aug 2010
Posts: 13

PostPosted: Mon Aug 30, 2010 12:01 pm    Post subject: Missing ucodes + wireless Reply with quote

Hello everyone, I have a similar problem to the one in this thread https://forums.gentoo.org/viewtopic-t-825394-start-0.html. The author solves his problem by updating his kernel but my install is with the 2.6.35 gentoo sources kernel which I think is the latest available.

lspci:
Code:
02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)


dmesg

Code:
iwlagn 0000:02:00.0: request for firmware file 'iwlwifi-4965-2.ucode' failed.
iwlagn 0000:02:00.0: no suitable firmware found!


I am a hundred percent sure the firmware is in /lib/firmware but the message stays in dmesg.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31349
Location: 56N 3W

PostPosted: Mon Aug 30, 2010 7:34 pm    Post subject: Reply with quote

gmunk,

Show us ls -l /lib/firmware please.

If iwlwifi-4965-2.ucode isn't there, with that exact name, it won't work.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
gmunk
n00b
n00b


Joined: 14 Aug 2010
Posts: 13

PostPosted: Thu Sep 02, 2010 1:30 pm    Post subject: Reply with quote

NeddySeagoon wrote:
gmunk,

Show us ls -l /lib/firmware please.

If iwlwifi-4965-2.ucode isn't there, with that exact name, it won't work.


Sorry for the late answer, didn't have the chance to post earlier. Here is the ls -l
Code:
-rw-r--r-- 1 root root 187972 Aug 30 17:43 iwlwifi-4965-2.ucode

The firmware is there, but dmesg still says it can't find it...
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31349
Location: 56N 3W

PostPosted: Thu Sep 02, 2010 6:38 pm    Post subject: Reply with quote

gmunk,

Thats ok.

In dmesg, you should find some lines about starting your wireless interface.
Post them all and about 5 lines ether side. If in doubt, post the whole dmesg output.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
gmunk
n00b
n00b


Joined: 14 Aug 2010
Posts: 13

PostPosted: Fri Sep 03, 2010 12:36 pm    Post subject: Reply with quote

NeddySeagoon wrote:
gmunk,

Thats ok.

In dmesg, you should find some lines about starting your wireless interface.
Post them all and about 5 lines ether side. If in doubt, post the whole dmesg output.


Code:
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: (unregistered net_device): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
ata5: port disabled. ignoring.
ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
ata4.00: configured for UDMA/33
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:b7:82:d5:f2
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
iwlagn 0000:02:00.0: setting latency timer to 64
iwlagn 0000:02:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels


I reckon this is the needed info, if not I'll post the whole dmesg,
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Fri Sep 03, 2010 3:05 pm    Post subject: Reply with quote

Hi, can you post this :

Code:

# ifconfig -a
# iwconfig
# iwlist scan
# dmesg | tail

_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
gmunk
n00b
n00b


Joined: 14 Aug 2010
Posts: 13

PostPosted: Fri Sep 03, 2010 4:56 pm    Post subject: Reply with quote

d2_racing wrote:
Hi, can you post this :

Code:

# ifconfig -a
# iwconfig
# iwlist scan
# dmesg | tail


From the chrooted environment or from the hard disk. I'm asking since I currently cannot access the internet in any other way than wireless and I'm using a live cd to post here?
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Fri Sep 03, 2010 5:08 pm    Post subject: Reply with quote

[quote="gmunk"From the chrooted environment or from the hard disk. I'm asking since I currently cannot access the internet in any other way than wireless and I'm using a live cd to post here?[/quote]

From the hard disk and if you are stuck, do you have a USB stick ?

If so, you could send the output command to a .txt file inside your USB stick and then post the result here.

We really need to see why your firmware is not working and from a chrooted env it will not be possible.
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
gmunk
n00b
n00b


Joined: 14 Aug 2010
Posts: 13

PostPosted: Sat Sep 04, 2010 5:24 pm    Post subject: Reply with quote

Here is the requested output
Code:

eth0      Link encap:Ethernet  HWaddr 00:15:b7:82:d5:f2 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:20 Memory:ffcc0000-ffce0000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:4 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:252 (252.0 B)  TX bytes:252 (252.0 B)

Linux version 2.6.35-gentoo-r1 (root@tux) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #14 PREEMPT Thu Aug 26 15:26:13 EEST 2010
Command line: root=/dev/sda6
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 00000000000eee00 (reserved)
 BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
 BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bff40000 (usable)
 BIOS-e820: 00000000bff40000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec28000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00500 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000ffd00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x13c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-EFFFF write-back
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0FEDA0000 mask FFFFE0000 write-back
  1 base 0FFE00000 mask FFFE00000 write-protect
  2 base 000000000 mask F80000000 write-back
  3 base 080000000 mask FC0000000 write-back
  4 base 100000000 mask FC0000000 write-back
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbff40 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bff40000
 0000000000 - 00bfe00000 page 2M
 00bfe00000 - 00bff40000 page 4k
kernel direct mapping tables up to bff40000 @ 8000-d000
init_memory_mapping: 0000000100000000-000000013c000000
 0100000000 - 013c000000 page 2M
kernel direct mapping tables up to 13c000000 @ b000-11000
ACPI: RSDP 00000000000f01e0 00014 (v00 TOSHIB)
ACPI: RSDT 00000000bff40000 00054 (v01 TOSHIB A0056    20070816 TASM 04010000)
ACPI: FACP 00000000bff40080 00084 (v02 TOSHIB A0056    20070816 TASM 04010000)
ACPI: DSDT 00000000bff40104 0635F (v02 TOSHIB A0056    20080108 MSFT 03000000)
ACPI: FACS 00000000000eee00 00040
ACPI: SSDT 00000000bff46463 00506 (v02 TOSHIB A0056    20061102 MSFT 03000000)
ACPI: BOOT 00000000bff40058 00028 (v01 TOSHIB A0056    20070816 TASM 04010000)
ACPI: APIC 00000000bff46dff 00068 (v01 TOSHIB A0056    20070816 TASM 04010000)
ACPI: MCFG 00000000bff46e67 0003C (v01 TOSHIB A0056    20070816 TASM 04010000)
ACPI: HPET 00000000bff46ed7 00038 (v01 TOSHIB A0056    20070816 TASM 04010000)
ACPI: TCPA 00000000bff47085 00032 (v02 TOSHIB A0056    20070816 TASM 04010000)
ACPI: SLIC 00000000bff46f0f 00176 (v01 TOSHIB A0056    20070816 TASM 04010000)
ACPI: ASF! 00000000bff470b7 00075 (v16 TOSHIB A0056    20070816 TASM 04010000)
ACPI: SSDT 00000000bff47bcb 005E1 (v02 TOSHIB A0056    20061220 MSFT 03000000)
ACPI: SSDT 00000000bff4712c 00076 (v02 TOSHIB A0056    20051021 MSFT 03000000)
ACPI: SSDT 00000000bff471a2 00A29 (v02 TOSHIB A0056    20061226 MSFT 03000000)
ACPI: Local APIC address 0xfee00000
(8/32 early reservations) ==> bootmem [0000000000 - 013c000000]
  #0 [0001000000 - 00019b42cc]    TEXT DATA BSS ==> [0001000000 - 00019b42cc]
  #1 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]
  #2 [00019b5000 - 00019b52c8]              BRK ==> [00019b5000 - 00019b52c8]
  #3 [0000001000 - 0000003000]       TRAMPOLINE ==> [0000001000 - 0000003000]
  #4 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #6 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
  #7 [000000c000 - 0000034000]          BOOTMAP ==> [000000c000 - 0000034000]
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0013c000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x0000009b
    0: 0x00000100 -> 0x000bff40
    0: 0x00100000 -> 0x0013c000
On node 0 totalpages: 1031898
  DMA zone: 56 pages used for memmap
  DMA zone: 150 pages reserved
  DMA zone: 3788 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 767864 pages, LIFO batch:31
  Normal zone: 3360 pages used for memmap
  Normal zone: 242400 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xd808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 00000000000ee000
PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000
PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
PM: Registered nosave memory: 00000000bff40000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec28000
PM: Registered nosave memory: 00000000fec28000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000
PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd00000
PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1014052
Kernel command line: root=/dev/sda6
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3988032k/5177344k available (5030k kernel code, 1049752k absent, 139560k reserved, 3962k data, 372k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
   RCU-based detection of stalled CPUs is disabled.
   Verbose stalled-CPUs detection is disabled.
NR_IRQS:288
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1995.322 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.64 BogoMIPS (lpj=1995322)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Actual Package length (12) is larger than NumElements field (5), truncated

ACPI Warning: Incorrect checksum in table [ASF!] - 0xE9, should be 0x94 (20100428/tbutils-314)
ACPI: SSDT 00000000bff46b71 000F3 (v02 TOSHIB A0056    20060921 MSFT 03000000)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000F3 (v02 TOSHIB A0056    20060921 MSFT 03000000)
ACPI: SSDT 00000000bff46cda 0006C (v02 TOSHIB A0056    20060921 MSFT 03000000)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0006C (v02 TOSHIB A0056    20060921 MSFT 03000000)
ACPI: SSDT 00000000bff46c64 00076 (v02 TOSHIB A0056    20060921 MSFT 03000000)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00076 (v02 TOSHIB A0056    20060921 MSFT 03000000)
ACPI: SSDT 00000000bff46d46 00079 (v02 TOSHIB A0056    20060921 MSFT 03000000)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00079 (v02 TOSHIB A0056    20060921 MSFT 03000000)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfebfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfec28000-0xfecfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00500-0xfed13fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed1a000-0xfed1bfff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed90000-0xfed9ffff]
pci_root PNP0A08:00: host bridge window [mem 0xfedc0000-0xfedfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xff9fffff]
pci_root PNP0A08:00: host bridge window [mem 0xffc00000-0xffcfffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: reg 10: [mem 0xffcffff0-0xffcfffff 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: reg 10: [mem 0xffcc0000-0xffcdffff]
pci 0000:00:19.0: reg 14: [mem 0xffcfe000-0xffcfefff]
pci 0000:00:19.0: reg 18: [io  0xbfe0-0xbfff]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xbf80-0xbf9f]
pci 0000:00:1a.1: reg 20: [io  0x0000-0x001f]
pci 0000:00:1a.7: reg 10: [mem 0xffcff800-0xffcffbff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x9fe0-0x9fff]
pci 0000:00:1d.1: reg 20: [io  0x9f80-0x9f9f]
pci 0000:00:1d.2: reg 20: [io  0x9f60-0x9f7f]
pci 0000:00:1d.7: reg 10: [mem 0xffcff400-0xffcff7ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0xd800-0xd87f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0xeec0-0xeeff] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 01e0 (mask 000f)
pci 0000:00:1f.1: reg 10: [io  0x9f58-0x9f5f]
pci 0000:00:1f.1: reg 14: [io  0x9f54-0x9f57]
pci 0000:00:1f.1: reg 18: [io  0x9f48-0x9f4f]
pci 0000:00:1f.1: reg 1c: [io  0x9f44-0x9f47]
pci 0000:00:1f.1: reg 20: [io  0x9f30-0x9f3f]
pci 0000:00:1f.2: reg 10: [io  0x9f28-0x9f2f]
pci 0000:00:1f.2: reg 14: [io  0x9f24-0x9f27]
pci 0000:00:1f.2: reg 18: [io  0x9f18-0x9f1f]
pci 0000:00:1f.2: reg 1c: [io  0x9f14-0x9f17]
pci 0000:00:1f.2: reg 20: [io  0x9ee0-0x9eff]
pci 0000:00:1f.2: reg 24: [mem 0xffcfd800-0xffcfdfff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0xcf00-0xcf7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfdffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xff9fe000-0xff9fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xff900000-0xff9fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.1: PCI bridge to [bus 03-04]
pci 0000:00:1c.1:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:0b.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:06:0b.0: supports D1 D2
pci 0000:06:0b.0: PME# supported from D0 D1 D2 D3hot
pci 0000:06:0b.0: PME# disabled
pci 0000:06:0b.1: reg 10: [mem 0x00000000-0x000007ff]
pci 0000:06:0b.1: reg 14: [mem 0x00000000-0x00003fff]
pci 0000:06:0b.1: supports D1 D2
pci 0000:06:0b.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:0b.1: PME# disabled
pci 0000:06:0b.2: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:06:0b.2: supports D1 D2
pci 0000:06:0b.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:0b.2: PME# disabled
pci 0000:06:0b.3: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:06:0b.3: supports D1 D2
pci 0000:06:0b.3: PME# supported from D0 D1 D2 D3hot
pci 0000:06:0b.3: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfec28000-0xfecfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed00500-0xfed13fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed1a000-0xfed1bfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfedc0000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xff9fffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffcfffff] (subtractive decode)
pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXCB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff
reserve RAM buffer: 00000000bff40000 - 00000000bfffffff
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: disabling [io  0x0010-0x001f] because it overlaps 0000:00:1a.1 BAR 4 [io  0x0000-0x001f]
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000e8000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbff3ffff] could not be reserved
system 00:00: [mem 0xbff40000-0xbff4ffff] has been reserved
system 00:00: [mem 0xbff50000-0xbfffffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec27fff] could not be reserved
system 00:00: [mem 0xfed00400-0xfed004ff] has been reserved
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xffa00000-0xffbfffff] has been reserved
system 00:00: [mem 0xffd00000-0xffffffff] has been reserved
system 00:00: [mem 0x100000000-0x13bffffff] could not be reserved
system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: [io  0x01e0-0x01ef] has been reserved
system 00:09: [io  0x0480-0x048f] has been reserved
system 00:09: [io  0xe000-0xe07f] has been reserved
system 00:09: [io  0xe080-0xe0ff] has been reserved
system 00:09: [io  0xe400-0xe47f] has been reserved
system 00:09: [io  0xe480-0xe4ff] has been reserved
system 00:09: [io  0xe800-0xe87f] has been reserved
system 00:09: [io  0xe880-0xe8ff] has been reserved
system 00:09: [io  0xec00-0xec7f] has been reserved
system 00:09: [io  0xec80-0xecff] has been reserved
system 00:09: [io  0xd800-0xd87f] has been reserved
system 00:09: [io  0xd880-0xd89f] has been reserved
system 00:09: [io  0xeec0-0xeeff] has been reserved
system 00:09: [io  0x0690-0x06ff] has been reserved
system 00:09: [io  0x04d0-0x04d1] has been reserved
pci 0000:00:1e.0: BAR 9: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:1e.0: BAR 8: assigned [mem 0xc4000000-0xc9ffffff]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xca000000-0xca1fffff 64bit pref]
pci 0000:00:1b.0: BAR 0: assigned [mem 0xca200000-0xca203fff 64bit]
pci 0000:00:1b.0: BAR 0: set to [mem 0xca200000-0xca203fff 64bit] (PCI address [0xca200000-0xca203fff]
pci 0000:00:1e.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1a.1: BAR 4: assigned [io  0x2000-0x201f]
pci 0000:00:1a.1: BAR 4: set to [io  0x2000-0x201f] (PCI address [0x2000-0x201f]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfdffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  disabled]
pci 0000:00:1c.0:   bridge window [mem 0xff900000-0xff9fffff]
pci 0000:00:1c.0:   bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 03-04]
pci 0000:00:1c.1:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xca000000-0xca1fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05-05]
pci 0000:00:1c.2:   bridge window [io  disabled]
pci 0000:00:1c.2:   bridge window [mem disabled]
pci 0000:00:1c.2:   bridge window [mem pref disabled]
pci 0000:06:0b.0: BAR 9: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:06:0b.0: BAR 10: assigned [mem 0xc4000000-0xc7ffffff]
pci 0000:06:0b.1: BAR 1: assigned [mem 0xc8000000-0xc8003fff]
pci 0000:06:0b.1: BAR 1: set to [mem 0xc8000000-0xc8003fff] (PCI address [0xc8000000-0xc8003fff]
pci 0000:06:0b.0: BAR 0: assigned [mem 0xc8004000-0xc8004fff]
pci 0000:06:0b.0: BAR 0: set to [mem 0xc8004000-0xc8004fff] (PCI address [0xc8004000-0xc8004fff]
pci 0000:06:0b.2: BAR 0: assigned [mem 0xc8005000-0xc8005fff]
pci 0000:06:0b.2: BAR 0: set to [mem 0xc8005000-0xc8005fff] (PCI address [0xc8005000-0xc8005fff]
pci 0000:06:0b.1: BAR 0: assigned [mem 0xc8006000-0xc80067ff]
pci 0000:06:0b.1: BAR 0: set to [mem 0xc8006000-0xc80067ff] (PCI address [0xc8006000-0xc80067ff]
pci 0000:06:0b.0: BAR 7: assigned [io  0x1000-0x10ff]
pci 0000:06:0b.0: BAR 8: assigned [io  0x1400-0x14ff]
pci 0000:06:0b.3: BAR 0: assigned [mem 0xc8006800-0xc80068ff]
pci 0000:06:0b.3: BAR 0: set to [mem 0xc8006800-0xc80068ff] (PCI address [0xc8006800-0xc80068ff]
pci 0000:06:0b.0: CardBus bridge to [bus 07-0a]
pci 0000:06:0b.0:   bridge window [io  0x1000-0x10ff]
pci 0000:06:0b.0:   bridge window [io  0x1400-0x14ff]
pci 0000:06:0b.0:   bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:06:0b.0:   bridge window [mem 0xc4000000-0xc7ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 06-07]
pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1e.0:   bridge window [mem 0xc4000000-0xc9ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:06:0b.0: enabling device (0000 -> 0003)
pci 0000:06:0b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xefffffff]
pci_bus 0000:00: resource 9 [mem 0xf4000000-0xfebfffff]
pci_bus 0000:00: resource 10 [mem 0xfec28000-0xfecfffff]
pci_bus 0000:00: resource 11 [mem 0xfed00500-0xfed13fff]
pci_bus 0000:00: resource 12 [mem 0xfed1a000-0xfed1bfff]
pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 14 [mem 0xfed90000-0xfed9ffff]
pci_bus 0000:00: resource 15 [mem 0xfedc0000-0xfedfffff]
pci_bus 0000:00: resource 16 [mem 0xfee01000-0xff9fffff]
pci_bus 0000:00: resource 17 [mem 0xffc00000-0xffcfffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xff900000-0xff9fffff]
pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:03: resource 2 [mem 0xca000000-0xca1fffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xc4000000-0xc9ffffff]
pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:06: resource 8 [mem 0xc0000000-0xefffffff]
pci_bus 0000:06: resource 9 [mem 0xf4000000-0xfebfffff]
pci_bus 0000:06: resource 10 [mem 0xfec28000-0xfecfffff]
pci_bus 0000:06: resource 11 [mem 0xfed00500-0xfed13fff]
pci_bus 0000:06: resource 12 [mem 0xfed1a000-0xfed1bfff]
pci_bus 0000:06: resource 13 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:06: resource 14 [mem 0xfed90000-0xfed9ffff]
pci_bus 0000:06: resource 15 [mem 0xfedc0000-0xfedfffff]
pci_bus 0000:06: resource 16 [mem 0xfee01000-0xff9fffff]
pci_bus 0000:06: resource 17 [mem 0xffc00000-0xffcfffff]
pci_bus 0000:07: resource 0 [io  0x1000-0x10ff]
pci_bus 0000:07: resource 1 [io  0x1400-0x14ff]
pci_bus 0000:07: resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:07: resource 3 [mem 0xc4000000-0xc7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Simple Boot Flag value 0xb read from CMOS RAM was invalid
Simple Boot Flag at 0x7c set to 0x1
msgmni has been set to 7789
alg: No test for stdrng (krng)
io scheduler noop registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
acpi device:23: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:00/input/input3
ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (74 C)
tifm_7xx1 0000:06:0b.2: enabling device (0000 -> 0002)
tifm_7xx1 0000:06:0b.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
Switching to clocksource hpet
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 19
ata2: DUMMY
ata3: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
ACPI: Battery Slot [BAT1] (battery present)
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x9f30 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x9f38 irq 15
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: (unregistered net_device): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
ata5: port disabled. ignoring.
ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
ata4.00: configured for UDMA/33
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:b7:82:d5:f2
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
iwlagn 0000:02:00.0: setting latency timer to 64
iwlagn 0000:02:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
firewire_ohci 0000:06:0b.1: enabling device (0000 -> 0002)
firewire_ohci 0000:06:0b.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
firewire_ohci: Added fw-ohci device 0000:06:0b.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
yenta_cardbus 0000:06:0b.0: CardBus bridge found [1179:0001]
yenta_cardbus 0000:06:0b.0: Enabling burst memory read transactions
yenta_cardbus 0000:06:0b.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:06:0b.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:06:0b.0: TI: mfunc 0x01aa1022, devctl 0x64
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: FUJITSU MHW2160BH PL, 0040001D, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2160B 0040 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.40 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
 sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
firewire_core: created device fw0: GUID 000039000086b7ec, S400
yenta_cardbus 0000:06:0b.0: ISA IRQ mask 0x0cf8, PCI irq 20
yenta_cardbus 0000:06:0b.0: Socket status: 30000006
pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
yenta_cardbus 0000:06:0b.0: pcmcia: parent PCI bridge window: [io  0x1000-0x1fff]
yenta_cardbus 0000:06:0b.0: pcmcia: parent PCI bridge window: [mem 0xc4000000-0xc9ffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xc4000000-0xc9ffffff: excluding 0xc4000000-0xc81fffff
yenta_cardbus 0000:06:0b.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: excluding 0xc0000000-0xc3ffffff
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xffcff800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffcff400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bf80
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: enabling device (0000 -> 0001)
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00002000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009fe0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009f80
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009f60
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
evbug.c: Connected device: input0 (Lid Switch at PNP0C0D/button/input0)
evbug.c: Connected device: input1 (Power Button at PNP0C0C/button/input0)
evbug.c: Connected device: input2 (Power Button at LNXPWRBN/button/input0)
evbug.c: Connected device: input3 (Video Bus at LNXVIDEO/video/input0)
input: PC Speaker as /devices/platform/pcspkr/input/input4
evbug.c: Connected device: input4 (PC Speaker at isa0061/input0)
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0xd860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:06:0b.3: SDHCI controller found [104c:803c] (rev 0)
sdhci-pci 0000:06:0b.3: enabling device (0000 -> 0002)
sdhci-pci 0000:06:0b.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:06:0b.3] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Toshiba input device as /devices/virtual/input/input5
evbug.c: Connected device: input5 (Toshiba input device at \_SB_.VALZ)
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
evbug.c: Connected device: input6 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC262: SKU not ready 0x598301f0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
evbug.c: Connected device: input7 (HDA Digital PCBeep at card0/codec#0/beep0)
ALSA device list:
  #0: HDA Intel at 0xca200000 irq 22
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 17
kmemleak: Kernel memory leak detector initialized
rtc_cmos 00:08: setting system clock to 2010-09-04 19:52:46 UTC (1283629966)
kmemleak: Automatic memory scanning thread started
usb 3-1: new low speed USB device using uhci_hcd and address 2
input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input8
evbug.c: Connected device: input8 (PS/2+USB Mouse at usb-0000:00:1a.0-1/input0)
generic-usb 0003:04F3:0210.0001: input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1a.0-1/input0
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input9
evbug.c: Connected device: input9 (DualPoint Stick at isa0060/serio1/input1)
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input10
evbug.c: Connected device: input10 (AlpsPS/2 ALPS DualPoint TouchPad at isa0060/serio1/input0)
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext2 filesystem) readonly on device 8:6.
Freeing unused kernel memory: 372k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1096k freed
Freeing unused kernel memory: 564k freed
usb 6-1: new full speed USB device using uhci_hcd and address 2
EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda6): re-mounted. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda8): recovery complete
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
Adding 7815584k swap on /dev/sda7.  Priority:-1 extents:1 across:7815584k
iwlagn 0000:02:00.0: request for firmware file 'iwlwifi-4965-2.ucode' failed.
iwlagn 0000:02:00.0: no suitable firmware found!
iwlagn 0000:02:00.0: PCI INT A disabled
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 205
evbug.c: Event. Dev: input6, Type: 1, Code: 106, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 205
evbug.c: Event. Dev: input6, Type: 1, Code: 106, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 208
evbug.c: Event. Dev: input6, Type: 1, Code: 108, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 208
evbug.c: Event. Dev: input6, Type: 1, Code: 108, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 2
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 14
evbug.c: Event. Dev: input6, Type: 1, Code: 14, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 19
evbug.c: Event. Dev: input6, Type: 1, Code: 19, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 19
evbug.c: Event. Dev: input6, Type: 1, Code: 19, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 24
evbug.c: Event. Dev: input6, Type: 1, Code: 24, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 24
evbug.c: Event. Dev: input6, Type: 1, Code: 24, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 24
evbug.c: Event. Dev: input6, Type: 1, Code: 24, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 24
evbug.c: Event. Dev: input6, Type: 1, Code: 24, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 20
evbug.c: Event. Dev: input6, Type: 1, Code: 20, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 20
evbug.c: Event. Dev: input6, Type: 1, Code: 20, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 28
evbug.c: Event. Dev: input6, Type: 1, Code: 28, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 28
evbug.c: Event. Dev: input6, Type: 1, Code: 28, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 32
evbug.c: Event. Dev: input6, Type: 1, Code: 32, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 32
evbug.c: Event. Dev: input6, Type: 1, Code: 32, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 4
evbug.c: Event. Dev: input6, Type: 1, Code: 4, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 4
evbug.c: Event. Dev: input6, Type: 1, Code: 4, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 33
evbug.c: Event. Dev: input6, Type: 1, Code: 33, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 33
evbug.c: Event. Dev: input6, Type: 1, Code: 33, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 2
evbug.c: Event. Dev: input6, Type: 1, Code: 2, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 2
evbug.c: Event. Dev: input6, Type: 1, Code: 2, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 30
evbug.c: Event. Dev: input6, Type: 1, Code: 30, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 30
evbug.c: Event. Dev: input6, Type: 1, Code: 30, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 49
evbug.c: Event. Dev: input6, Type: 1, Code: 49, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 49
evbug.c: Event. Dev: input6, Type: 1, Code: 49, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 46
evbug.c: Event. Dev: input6, Type: 1, Code: 46, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 46
evbug.c: Event. Dev: input6, Type: 1, Code: 46, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 4
evbug.c: Event. Dev: input6, Type: 1, Code: 4, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 4
evbug.c: Event. Dev: input6, Type: 1, Code: 4, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 28
evbug.c: Event. Dev: input6, Type: 1, Code: 28, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 28
evbug.c: Event. Dev: input6, Type: 1, Code: 28, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 23
evbug.c: Event. Dev: input6, Type: 1, Code: 23, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 23
evbug.c: Event. Dev: input6, Type: 1, Code: 23, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 33
evbug.c: Event. Dev: input6, Type: 1, Code: 33, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 33
evbug.c: Event. Dev: input6, Type: 1, Code: 33, Value: 0
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 46
evbug.c: Event. Dev: input6, Type: 1, Code: 46, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 24
evbug.c: Event. Dev: input6, Type: 1, Code: 24, Value: 1
evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: input6, Type: 4, Code: 4, Value: 46
Back to top
View user's profile Send private message
gmunk
n00b
n00b


Joined: 14 Aug 2010
Posts: 13

PostPosted: Sat Sep 04, 2010 5:29 pm    Post subject: Reply with quote

Sorry for the double post but it seems the output of dmesg is too big and it didn't fit with the other remarks I had in the previous post. I just want to add that iwlist and iwconfig produce a no such command error. I presume I should install them?
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Sat Sep 04, 2010 6:53 pm    Post subject: Reply with quote

Hi, you need to install wireless-tools.

After that, post this :

Code:

# ifconfig -a
# iwconfig
# iwlist scan

_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31349
Location: 56N 3W

PostPosted: Sat Sep 04, 2010 9:26 pm    Post subject: Reply with quote

gmunk,

Code:
iwlagn 0000:02:00.0: request for firmware file 'iwlwifi-4965-2.ucode' failed.
iwlagn 0000:02:00.0: no suitable firmware found!

The firmware is essential.

Code:
emerge net-wireless/iwl4965-ucode
This will also put it in the right place.
Look in /lib/fimeware at the filename the emerge created. It must match or it won't be used.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Tue Sep 07, 2010 2:41 pm    Post subject: Reply with quote

Any update ?
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
kudu
n00b
n00b


Joined: 10 Sep 2010
Posts: 4

PostPosted: Fri Sep 10, 2010 2:26 pm    Post subject: Reply with quote

Hi,

i seem to have the same issues as OP, but havent got a clue if it's my misconfiguration or it's a bug.

Code:

iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
iwlagn 0000:03:00.0: request for firmware file 'iwlwifi-4965-2.ucode' failed.
iwlagn 0000:03:00.0: no suitable firmware found!
iwlagn 0000:03:00.0: PCI INT A disabled


as of now, im running 2.6.34-gentoo-r6 x86_64 and have no wireless connection, but when rebooting with an older kernel (2.6.33-gentoo-r2),
and the same firmware iwl4965-ucode-228.61.2.24 everything works as expected. afaik, i havent changed configs, just copied them over from 2.6.33.
the machine in question is an ibm thinkpad r61.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31349
Location: 56N 3W

PostPosted: Fri Sep 10, 2010 7:57 pm    Post subject: Reply with quote

kudu,

Welcome to GEntoo.
Code:
iwlagn 0000:03:00.0: request for firmware file 'iwlwifi-4965-2.ucode' failed.
says thay your system is looking for 4965 firmare.
If you have a file in /lib/firmware called iwl4965-ucode-228.61.2.24, it won't work as its name is not what the kernel wants.

You can try a symlink, so either name work
Code:
cd /lib/firmware
ln -s iwl4965-ucode-228.61.2.24 iwlwifi-4965-2.ucode
but I don't know if the file contents are the same.
You could also get the firmware from the web and rename it to iwlwifi-4965-2.ucode to keep the kernel module happy.
This site suggests that there is a iwlwifi-4965-ucode-4.44.17 verion around.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
kudu
n00b
n00b


Joined: 10 Sep 2010
Posts: 4

PostPosted: Fri Sep 10, 2010 8:17 pm    Post subject: Reply with quote

Hi again, and thanks for the welcome :>

no, it's not the missing-file case here, everything's in place as it should be, md5's are the same as they are on intellinuxwireless.org's last version
Code:
 bd6c33d15822b6005079849b5f4fa4c4 


besides, don't you think that a simple reboot into older kern shouldnt still work(as it is working)? :>

uh, forgot, will try this 4.44.17 firmware in a little while
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31349
Location: 56N 3W

PostPosted: Fri Sep 10, 2010 9:26 pm    Post subject: Reply with quote

kudu,

Its the wrongly named file case. You have provided a file namaed <A>, the kernel is looking for a file named <B>
It may well be that the file name embedded in the kernel has changed from one kernel version to another.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
kudu
n00b
n00b


Joined: 10 Sep 2010
Posts: 4

PostPosted: Fri Sep 10, 2010 11:00 pm    Post subject: Reply with quote

okay, i think we're talking in a bit different levels :>
the file /lib/firmware/iwlwifi-4965-2.ucode(same md5 as in the one from intellinuxwireless.org) stays the same between reboots,
with kernel 2.6.33-gentoo-r2 everything works as expected.
booting into 2.6.34-gentoo-r6, and i get the same message as OP. just checked requested firmwares filename from iwl-4965.c, it's still the same as it was in 2.6.33-gentoo-r2 so it's imho not the case with wrong filenames :>
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31349
Location: 56N 3W

PostPosted: Fri Sep 10, 2010 11:16 pm    Post subject: Reply with quote

kudu,

I was mislead by your original post where you say
kudu wrote:
... same firmware iwl4965-ucode-228.61.2.24
which I took to be the file name.
It sounds like a kernel bug.

Try the testing gentoo-sources, which was 2.6.35-r5 las time I looked.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
kudu
n00b
n00b


Joined: 10 Sep 2010
Posts: 4

PostPosted: Fri Sep 10, 2010 11:56 pm    Post subject: Reply with quote

oh well, just rebuilt kernel, and set iwlagn as a loadable module(had it built in last time), everything works now with the same firmware.
im getting suspicious bout my config, because if there's only a few people complainin' then the problem's probably at their and my side :>
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31349
Location: 56N 3W

PostPosted: Sat Sep 11, 2010 12:42 pm    Post subject: Reply with quote

kudu,

It should work either built in or as a module. In general, wifi seems to give more predictable performance when its a loadable module.
With it built in, I wonder if the kernel tries to load the firmware before root is mounted ?
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
anath0r
n00b
n00b


Joined: 10 Aug 2006
Posts: 10

PostPosted: Sun Sep 12, 2010 7:41 pm    Post subject: Reply with quote

well done!
i confirm this a kind of bug, after emerging whole system i noticed a problem with iwlagn microcodes
after marking iwlagn as a module in kernel config, the microcodes are loading correctly!
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Sun Sep 12, 2010 11:45 pm    Post subject: Reply with quote

Good :P
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
gmunk
n00b
n00b


Joined: 14 Aug 2010
Posts: 13

PostPosted: Sun Sep 26, 2010 10:39 am    Post subject: Reply with quote

So after a month the community solved it, great work guys. I needed the computer I used for the testing thats why I couldn't update and just gave up on the thing. I think I'll try again after reading this. Though there is something that is bugging me, with the testing gentoo-sources kernel when making make defconfig the problem disappeared and the firmware was loaded, I can't say if defconfig marks iwlagn as a module but that may be the case there.

Anyway thanks again and good work guys. :)
Back to top
View user's profile Send private message
jenkler
Tux's lil' helper
Tux's lil' helper


Joined: 28 Apr 2003
Posts: 143
Location: Sweden - Stockholm

PostPosted: Sun Apr 10, 2011 11:36 am    Post subject: Nice Reply with quote

I have also looked for a solution for this issue :D thanks
_________________
This is me: Mikael Jenkler and here is my guides

Fashion advice: Fashion forum

/Mikael
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum