View previous topic :: View next topic |
Author |
Message |
wswartzendruber Veteran
Joined: 23 Mar 2004 Posts: 1261 Location: Idaho, USA
|
Posted: Sat Aug 21, 2010 8:47 pm Post subject: Making Fonts Thicker |
|
|
Is there someway I can make all the fonts just a tad thicker? |
|
Back to top |
|
|
BitJam Advocate
Joined: 12 Aug 2003 Posts: 2508 Location: Silver City, NM
|
Posted: Sun Aug 22, 2010 1:44 am Post subject: |
|
|
I'm no expert but I would suggest changing your X Server DPI setting and then selecting fonts with a different point size. Here are some tips for adjusting the X Server DPI. I've got an Nvidia card so I just put the following line in the "Device" section of xorg.conf: Code: | Option "DPI" "120 x 120" |
I don't know of any way to directly fine tune font thickness.
The method I suggest is based on the premise that fonts with different point sizes have different relative thicknesses so an enlarged font with a smaller point size will be thicker than a non-enlarged font with a larger point size. Your current DPI should be in your Xorg.log (or Xorg.0.log) file. I *think* a larger DPI will magnify your fonts allowing you to use fonts with a smaller point size which should be a little thicker. |
|
Back to top |
|
|
PaulBredbury Watchman
Joined: 14 Jul 2005 Posts: 7310
|
Posted: Sun Aug 22, 2010 6:50 am Post subject: |
|
|
The proper answer to your question is "no" - it would only be "yes" if screens had the same DPI that decent laser printers enjoy. I.e. 600+ rather than 96-120-ish.
However, there's the "Gibson" tweak that I mention, and the old Ubuntu patches (together with the flexibility of fontconfig), and the newer Infinality freetype patch that I use and recommend. It's all there in the Gentoo fonts thread. |
|
Back to top |
|
|
|