Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Most powerful machine you've put gentoo on?
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 22, 23, 24, 25  Next  
Reply to topic    Gentoo Forums Forum Index Gentoo Chat
View previous topic :: View next topic  
Author Message
warrens
Apprentice
Apprentice


Joined: 04 Jan 2005
Posts: 223
Location: Don't Tread On Me!

PostPosted: Fri Jan 01, 2010 6:56 pm    Post subject: Reply with quote

Just did major surgery on my old P4 3.2GHz. Replaced Intel motherboard with BioStar TA390GX A3+ w/ 4GB RAM, AMD Phenom II X4 945 (3.0GHZ OC'ed to 3.2GHx). Replace old NVidia 5990Ultra with NVidia GT 220. Kept my old Audigy2 soundcard and my original case.

Now gcc takes less than 15 minutes to compile and openoffice less than an hour. :D
Code:
processor       : 0                   
vendor_id       : AuthenticAMD         
cpu family      : 16                   
model           : 4                   
model name      : AMD Phenom(tm) II X4 945 Processor
stepping        : 2                                 
cpu MHz         : 3224.967                         
cache size      : 512 KB                           
physical id     : 0                                 
siblings        : 4                                 
core id         : 0                                 
cpu cores       : 4                                 
apicid          : 0                                 
initial apicid  : 0                                 
fpu             : yes                               
fpu_exception   : yes                               
cpuid level     : 5                                 
wp              : yes                               
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt                   
bogomips        : 6449.92                                   
TLB size        : 1024 4K pages                             
clflush size    : 64                                         
cache_alignment : 64                                         
address sizes   : 48 bits physical, 48 bits virtual         
power management: ts ttp tm stc 100mhzsteps hwpstate         

processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 16         
model           : 4           
model name      : AMD Phenom(tm) II X4 945 Processor
stepping        : 2                                 
cpu MHz         : 3224.967                         
cache size      : 512 KB                           
physical id     : 0                                 
siblings        : 4                                 
core id         : 1                                 
cpu cores       : 4                                 
apicid          : 1                                 
initial apicid  : 1                                 
fpu             : yes                               
fpu_exception   : yes                               
cpuid level     : 5                                 
wp              : yes                               
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt                   
bogomips        : 6450.19                                   
TLB size        : 1024 4K pages                             
clflush size    : 64                                         
cache_alignment : 64                                         
address sizes   : 48 bits physical, 48 bits virtual         
power management: ts ttp tm stc 100mhzsteps hwpstate         

processor       : 2
vendor_id       : AuthenticAMD
cpu family      : 16         
model           : 4           
model name      : AMD Phenom(tm) II X4 945 Processor
stepping        : 2                                 
cpu MHz         : 3224.967                         
cache size      : 512 KB                           
physical id     : 0                                 
siblings        : 4                                 
core id         : 2                                 
cpu cores       : 4                                 
apicid          : 2                                 
initial apicid  : 2                                 
fpu             : yes                               
fpu_exception   : yes                               
cpuid level     : 5                                 
wp              : yes                               
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt                   
bogomips        : 6450.19                                   
TLB size        : 1024 4K pages                             
clflush size    : 64                                         
cache_alignment : 64                                         
address sizes   : 48 bits physical, 48 bits virtual         
power management: ts ttp tm stc 100mhzsteps hwpstate         

processor       : 3
vendor_id       : AuthenticAMD
cpu family      : 16         
model           : 4           
model name      : AMD Phenom(tm) II X4 945 Processor
stepping        : 2                                 
cpu MHz         : 3224.967                         
cache size      : 512 KB                           
physical id     : 0                                 
siblings        : 4                                 
core id         : 3                                 
cpu cores       : 4                                 
apicid          : 3                                 
initial apicid  : 3                                 
fpu             : yes                               
fpu_exception   : yes                               
cpuid level     : 5                                 
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips        : 6450.19
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

_________________
The BIGGER the GOVERNMENT, the smaller the citizen.

DON'T TREAD ON ME!!!

My Bias #1
The best government is the government that governs least.
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Sat Jan 02, 2010 5:06 am    Post subject: Reply with quote

Can you post this after your completed your toolchain :

Code:

# emerge -ep system | genlop -p

_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
warrens
Apprentice
Apprentice


Joined: 04 Jan 2005
Posts: 223
Location: Don't Tread On Me!

PostPosted: Sat Jan 02, 2010 5:23 am    Post subject: Reply with quote

Code:
emerge -ep system | genlop -p
These are the pretended packages: (this may take a while; wait...)                                                       

[ebuild   R   ] sys-apps/portage-2.2_rc61
[ebuild   R   ] virtual/libintl-0         
[ebuild   R   ] sys-libs/zlib-1.2.3-r1   
[ebuild   R   ] sys-devel/gnuconfig-20090819
[ebuild   R   ] dev-libs/expat-2.0.1-r2     
[ebuild   R   ] dev-libs/gmp-4.3.1           
[ebuild   R   ] virtual/libiconv-0           
[ebuild   R   ] app-misc/pax-utils-0.1.19   
[ebuild   R   ] sys-devel/gcc-config-1.4.1   
[ebuild   R   ] app-portage/portage-utils-0.2.1
[ebuild   R   ] sys-devel/automake-wrapper-4   
[ebuild   R   ] app-arch/bzip2-1.0.5-r1         
[ebuild   R   ] app-misc/mime-types-8           
[ebuild   R   ] app-admin/python-updater-0.7   
[ebuild   R   ] sys-devel/autoconf-wrapper-8   
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8   
[ebuild   R   ] sys-libs/timezone-data-2009t   
[ebuild   R   ] dev-libs/oniguruma-5.9.1       
[ebuild   R   ] sys-devel/patch-2.5.9-r1       
[ebuild   R   ] app-arch/cpio-2.10             
[ebuild   R   ] sys-apps/which-2.20             
[ebuild   R   ] dev-util/pkgconfig-0.23         
[ebuild   R   ] app-arch/xz-utils-4.999.9_beta 
[ebuild   R   ] media-sound/alsa-headers-1.0.21
[ebuild   R   ] sys-devel/m4-1.4.13             
[ebuild   R   ] sys-kernel/linux-headers-2.6.30-r1
[ebuild   R   ] sys-apps/sandbox-2.2               
[ebuild   R   ] dev-libs/mpfr-2.4.2_p1             
[ebuild   R   ] dev-java/java-config-wrapper-0.16 
[ebuild   R   ] media-libs/libpng-1.2.41           
[ebuild   R   ] sys-apps/sysvinit-2.87-r1         
[ebuild   R   ] net-misc/iputils-20071127-r2       
[ebuild   R   ] virtual/init-0                     
[ebuild   R   ] sys-apps/baselayout-2.0.1         
[ebuild   R   ] sys-apps/module-init-tools-3.11.1 
[ebuild   R   ] sys-apps/debianutils-3.2.2         
[ebuild   R   ] sys-auth/pambase-20090620.1-r1     
[ebuild   R   ] virtual/acl-0                     
[ebuild   R   ] virtual/jdk-1.6.0                 
[ebuild   R   ] virtual/jre-1.6.0                 
[ebuild   R   ] app-admin/eselect-vi-1.1.6         
[ebuild   R   ] sys-devel/binutils-config-2       
[ebuild   R   ] sys-apps/man-pages-posix-2003a     
[ebuild   R   ] app-i18n/man-pages-zh_CN-1.5       
[ebuild   R   ] app-i18n/man-pages-ja-20070515     
[ebuild   R   ] app-admin/gamin-0.1.10             
[ebuild   R   ] app-admin/eselect-ctags-1.13       
[ebuild   R   ] dev-util/ctags-5.8                 
[ebuild   R   ] virtual/libffi-0                   
[ebuild   R   ] app-admin/eselect-fontconfig-1.1   
[ebuild   R   ] sys-devel/autoconf-2.65           
[ebuild   R   ] sys-devel/automake-1.10.3         
[ebuild   R   ] sys-devel/libtool-2.2.6b           
[ebuild   R   ] dev-lang/tcl-8.5.7                 
[ebuild   R   ] dev-libs/libffi-3.0.8             
[ebuild   R   ] x11-misc/util-macros-1.4.1         
[ebuild   R   ] sys-devel/gettext-0.17             
[ebuild   R   ] sys-apps/sed-4.2.1                 
[ebuild   R   ] sys-devel/flex-2.5.35             
[ebuild   R   ] dev-libs/glib-2.22.3               
[ebuild   R   ] sys-apps/findutils-4.5.5           
[ebuild   R   ] sys-devel/make-3.81               
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2       
[ebuild   R   ] sys-apps/attr-2.4.43               
[ebuild   R   ] dev-libs/popt-1.15                 
[ebuild   R   ] app-arch/gzip-1.3.14               
[ebuild   R   ] sys-apps/kbd-1.15.1               
[ebuild   R   ] sys-apps/net-tools-1.60_p20090728014017-r1
[ebuild   R   ] sys-apps/gawk-3.1.7                       
[ebuild   R   ] app-arch/tar-1.22                         
[ebuild   R   ] dev-libs/libgpg-error-1.7                 
[ebuild   R   ] sys-devel/binutils-2.20                   
[ebuild   R   ] sys-apps/acl-2.2.47-r1                     
[ebuild   R   ] dev-libs/libpcre-8.00                     
[ebuild   R   ] sys-devel/bison-2.4.1                     
[ebuild   R   ] net-misc/rsync-3.0.6                       
[ebuild   R   ] dev-libs/libgcrypt-1.4.5                   
[ebuild   R   ] x11-proto/xproto-7.0.16                   
[ebuild   R   ] x11-proto/xextproto-7.1.1                 
[ebuild   R   ] x11-libs/xtrans-1.2.5                     
[ebuild   R   ] x11-proto/inputproto-2.0                   
[ebuild   R   ] x11-proto/kbproto-1.0.4                   
[ebuild   R   ] dev-libs/libpthread-stubs-0.1             
[ebuild   R   ] x11-proto/recordproto-1.14                 
[ebuild   R   ] x11-proto/printproto-1.0.4                 
[ebuild   R   ] sys-apps/grep-2.5.4-r1                     
[ebuild   R   ] x11-proto/renderproto-0.11                 
[ebuild   R   ] x11-proto/xf86bigfontproto-1.2.0           
[ebuild   R   ] x11-libs/libXau-1.0.5                     
[ebuild   R   ] x11-libs/libXdmcp-1.0.3                   
[ebuild   R   ] x11-libs/libICE-1.0.6                     
[ebuild   R   ] sys-apps/man-1.6f-r3                       
[ebuild   R   ] sys-apps/man-pages-3.23                   
[ebuild   R   ] sys-kernel/gentoo-sources-2.6.32           
[ebuild   R   ] sys-libs/ncurses-5.7-r3                   
[ebuild   R   ] app-shells/bash-4.0_p35                   
[ebuild   R   ] sys-apps/texinfo-4.13                     
[ebuild   R   ] sys-apps/coreutils-8.2                     
[ebuild   R   ] sys-libs/gpm-1.20.6                       
[ebuild   R   ] app-editors/nano-2.2.1                     
[ebuild   R   ] sys-apps/less-436                         
[ebuild   R   ] sys-process/psmisc-22.7                   
[ebuild   R   ] sys-process/procps-3.2.8                   
[ebuild   R   ] sys-libs/readline-6.0_p4                   
[ebuild   R   ] virtual/editor-0                           
[ebuild   R   ] virtual/pager-0                           
[ebuild   R   ] dev-db/sqlite-3.6.21                       
[ebuild   R   ] sys-libs/slang-2.2.2                       
[ebuild   R   ] sys-devel/bc-1.06.95                       
[ebuild   R   ] app-admin/eselect-1.2.8                   
[ebuild   R   ] app-admin/eselect-python-20090824         
[ebuild   R   ] app-editors/vim-core-7.2.303               
[ebuild   R   ] app-misc/ca-certificates-20090709         
[ebuild   R   ] app-admin/perl-cleaner-1.05               
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9             
[ebuild   R   ] x11-libs/libX11-1.3.2                     
[ebuild   R   ] x11-libs/libXext-1.1.1                     
[ebuild   R   ] media-libs/freetype-2.3.11                 
[ebuild   R   ] x11-libs/libXrender-0.9.5                 
[ebuild   R   ] x11-libs/libXi-1.3                         
[ebuild   R   ] x11-libs/libXp-1.0.0                       
[ebuild   R   ] media-libs/fontconfig-2.8.0               
[ebuild   R   ] x11-libs/libXtst-1.1.0                     
[ebuild   R   ] x11-libs/libXft-2.1.14                     
[ebuild   R   ] dev-lang/python-2.6.4                     
[ebuild   R   ] dev-libs/libxml2-2.7.6                     
[ebuild   R   ] dev-java/java-config-2.1.10               
[ebuild   R   ] sys-libs/cracklib-2.8.15                   
[ebuild   R   ] dev-libs/libgamin-0.1.10-r2               
[ebuild   R   ] sys-apps/file-5.03                         
[ebuild   R   ] media-libs/alsa-lib-1.0.21a               
[ebuild   R   ] sys-libs/db-4.8.24                         
[ebuild   R   ] app-admin/gam-server-0.1.10               
[ebuild   R   ] sys-libs/db-4.7.25_p4                     
[ebuild   R   ] dev-libs/libxslt-1.1.26                   
[ebuild   R   ] x11-proto/xcb-proto-1.6                   
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4                     
[ebuild   R   ] x11-libs/libxcb-1.5                       
[ebuild   R   ] sys-devel/libperl-5.8.8-r2                 
[ebuild   R   ] dev-lang/perl-5.8.8-r8                     
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2                 
[ebuild   R   ] sys-apps/util-linux-2.16.2                 
[ebuild   R   ] app-editors/vim-7.2.303                   
[ebuild   R   ] dev-perl/Locale-gettext-1.05-r1           
[ebuild   R   ] x11-libs/libSM-1.1.1                       
[ebuild   R   ] app-vim/pam-syntax-20060424               
[ebuild   R   ] app-vim/gentoo-syntax-20090720             
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9                   
[ebuild   R   ] net-misc/wget-1.12                         
[ebuild   R   ] sys-apps/help2man-1.36.4-r1               
[ebuild   R   ] x11-libs/libXt-1.0.7-r1                   
[ebuild   R   ] sys-devel/automake-1.11.1                 
[ebuild   R   ] x11-libs/libXmu-1.0.5                     
[ebuild   R   ] dev-lang/tk-8.5.7-r1                       
[ebuild   R   ] sys-apps/dbus-1.2.12                       
[ebuild   R   ] x11-libs/libXpm-3.5.8                     
[ebuild   R   ] x11-apps/xauth-1.0.4                       
[ebuild   R   ] dev-libs/dbus-glib-0.82                   
[ebuild   R   ] x11-libs/libXaw-1.0.7                     
[ebuild   R   ] sys-apps/groff-1.20.1-r2                   
[ebuild   R   ] sys-libs/glibc-2.11-r1
[ebuild   R   ] sys-libs/pam-1.1.1
[ebuild   R   ] sys-fs/udev-149
[ebuild   R   ] sys-devel/gcc-4.4.2
[ebuild   R   ] dev-java/sun-jdk-1.6.0.17
[ebuild   R   ] sys-apps/shadow-4.1.4.2-r1
[ebuild   R   ] sys-auth/consolekit-0.4.1
[ebuild   R   ] sys-apps/openrc-0.6.0
[ebuild   R   ] sys-apps/busybox-1.15.3
[ebuild   R   ] net-misc/openssh-5.3_p1-r1


Estimated update time: 1 hour, 16 minutes.

I know that a Core I7 would beat this, but not by much. :D
_________________
The BIGGER the GOVERNMENT, the smaller the citizen.

DON'T TREAD ON ME!!!

My Bias #1
The best government is the government that governs least.
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Sat Jan 02, 2010 5:28 am    Post subject: Reply with quote

I saw a CoreI7 under 57 minutes :P
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
warrens
Apprentice
Apprentice


Joined: 04 Jan 2005
Posts: 223
Location: Don't Tread On Me!

PostPosted: Sat Jan 02, 2010 6:05 am    Post subject: Reply with quote

Well, 1 hour, 16 minutes still beats the 4 hours+ for my old P4c 3.2GHz. :lol:
_________________
The BIGGER the GOVERNMENT, the smaller the citizen.

DON'T TREAD ON ME!!!

My Bias #1
The best government is the government that governs least.
Back to top
View user's profile Send private message
Quick23t
n00b
n00b


Joined: 07 Aug 2009
Posts: 66
Location: Phoenix, AZ

PostPosted: Sat Jan 02, 2010 9:40 pm    Post subject: Reply with quote

CoreI7 920 with mild overlclock.

Code:
cp@CPX58 ~ $ emerge -ep system | genlop -p
These are the pretended packages: (this may take a while; wait...)

[ebuild   R   ] sys-apps/portage-2.2_rc61
[ebuild   R   ] virtual/libintl-0
[ebuild   R   ] sys-libs/zlib-1.2.3-r1
[ebuild   R   ] sys-devel/gnuconfig-20090819
[ebuild   R   ] virtual/libiconv-0
[ebuild   R   ] app-misc/pax-utils-0.1.19
[ebuild   R   ] app-arch/bzip2-1.0.5-r1
[ebuild   R   ] dev-libs/gmp-4.3.1
[ebuild   R   ] dev-libs/expat-2.0.1-r2
[ebuild   R   ] sys-devel/automake-wrapper-4
[ebuild   R   ] sys-devel/autoconf-wrapper-8
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8
[ebuild   R   ] app-misc/mime-types-8
[ebuild   R   ] app-admin/python-updater-0.7
[ebuild   R   ] sys-libs/timezone-data-2009u
[ebuild   R   ] dev-libs/libffi-3.0.9
[ebuild   R   ] sys-devel/patch-2.5.9-r1
[ebuild   R   ] app-arch/cpio-2.10
[ebuild   R   ] net-dns/openresolv-3.3.2
[ebuild   R   ] sys-apps/which-2.20
[ebuild   R   ] sys-apps/funtoo-netscripts-1.1
[ebuild   R   ] dev-util/pkgconfig-0.23
[ebuild   R   ] app-arch/xz-utils-4.999.9_beta
[ebuild   R   ] dev-util/gperf-3.0.4
[ebuild   R   ] app-portage/portage-utils-0.2.1
[ebuild   R   ] sys-devel/m4-1.4.13
[ebuild   R   ] sys-kernel/linux-headers-2.6.29
[ebuild   R   ] sys-apps/sandbox-2.2
[ebuild   R   ] dev-libs/mpfr-2.4.2_p1
[ebuild   R   ] sys-apps/pciutils-3.1.4
[ebuild   R   ] virtual/libffi-0
[ebuild   R   ] sys-apps/net-tools-1.60_p20100101055920
[ebuild   R   ] sys-apps/sysvinit-2.87-r1
[ebuild   R   ] net-misc/iputils-20071127-r2
[ebuild   R   ] virtual/init-0
[ebuild   R   ] sys-apps/baselayout-2.1.6
[ebuild   R   ] sys-apps/module-init-tools-3.11.1
[ebuild   R   ] sys-apps/debianutils-3.2.2
[ebuild   R   ] sys-devel/libperl-5.10.1-r11
[ebuild   R   ] sys-auth/pambase-20090620.1-r1
[ebuild   R   ] virtual/acl-0
[ebuild   R   ] sys-devel/gcc-config-1.4.1
[ebuild   R   ] virtual/libusb-0
[ebuild   R   ] sys-apps/usbutils-0.86-r1
[ebuild   R   ] sys-devel/binutils-config-2
[ebuild   R   ] sys-apps/man-pages-posix-2003a
[ebuild   R   ] sys-devel/autoconf-2.65
[ebuild   R   ] sys-devel/automake-1.10.3
[ebuild   R   ] sys-devel/libtool-2.2.6b
[ebuild   R   ] dev-libs/libusb-0.1.12-r6
[ebuild   R   ] x11-misc/util-macros-1.4.1
[ebuild   R   ] sys-devel/gettext-0.17
[ebuild   R   ] sys-devel/flex-2.5.35
[ebuild   R   ] sys-apps/sed-4.2.1
[ebuild   R   ] sys-apps/findutils-4.5.5
[ebuild   R   ] sys-devel/make-3.81
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2
[ebuild   R   ] dev-libs/glib-2.22.3
[ebuild   R   ] sys-apps/attr-2.4.43
[ebuild   R   ] dev-libs/popt-1.15
[ebuild   R   ] app-arch/gzip-1.3.14
[ebuild   R   ] sys-apps/kbd-1.15.1
[ebuild   R   ] sys-apps/gawk-3.1.7
[ebuild   R   ] app-arch/tar-1.22
[ebuild   R   ] dev-libs/libgpg-error-1.7
[ebuild   R   ] sys-devel/binutils-2.19.1-r1
[ebuild   R   ] sys-apps/acl-2.2.47-r1
[ebuild   R   ] sys-devel/bison-2.4.1
[ebuild   R   ] net-misc/rsync-3.0.6
[ebuild   R   ] dev-libs/libpcre-8.00
[ebuild   R   ] dev-libs/libgcrypt-1.4.5
[ebuild   R   ] x11-proto/xproto-7.0.16
[ebuild   R   ] sys-libs/db-4.8.24
[ebuild   R   ] x11-proto/xextproto-7.1.1
[ebuild   R   ] x11-libs/xtrans-1.2.5
[ebuild   R   ] x11-proto/kbproto-1.0.4
[ebuild   R   ] dev-libs/libpthread-stubs-0.1
[ebuild   R   ] sys-libs/db-4.7.25_p4
[ebuild   R   ] sys-apps/grep-2.5.4-r1
[ebuild   R   ] x11-proto/xf86bigfontproto-1.2.0
[ebuild   R   ] x11-proto/inputproto-2.0
[ebuild   R   ] x11-libs/libXau-1.0.5
[ebuild   R   ] x11-libs/libICE-1.0.6
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4
[ebuild   R   ] x11-libs/libXdmcp-1.0.3
[ebuild   R   ] dev-lang/perl-5.10.1-r12
[ebuild   R   ] dev-perl/Locale-gettext-1.05-r1
[ebuild   R   ] sys-apps/help2man-1.36.4-r1
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2
[ebuild   R   ] net-misc/wget-1.12
[ebuild   R   ] sys-kernel/zen-sources-2.6.32_p3
[ebuild   R   ] sys-fs/udev-146-r2
[ebuild   R   ] sys-libs/ncurses-5.7-r3
[ebuild   R   ] sys-apps/texinfo-4.13
[ebuild   R   ] app-shells/bash-4.0_p35
[ebuild   R   ] sys-apps/coreutils-8.2
[ebuild   R   ] sys-apps/util-linux-2.16.2
[ebuild   R   ] app-editors/nano-2.2.1
[ebuild   R   ] sys-apps/less-436
[ebuild   R   ] sys-process/procps-3.2.8
[ebuild   R   ] sys-process/psmisc-22.7
[ebuild   R   ] sys-libs/gpm-1.20.6
[ebuild   R   ] sys-libs/readline-6.0_p3
[ebuild   R   ] x11-libs/libSM-1.1.1
[ebuild   R   ] sys-devel/automake-1.11.1
[ebuild   R   ] app-misc/ca-certificates-20090709
[ebuild   R   ] app-admin/perl-cleaner-2_pre091219
[ebuild   R   ] virtual/editor-0
[ebuild   R   ] virtual/pager-0
[ebuild   R   ] sys-devel/bc-1.06.95
[ebuild   R   ] app-admin/eselect-1.2.9
[ebuild   R   ] app-admin/eselect-vi-1.1.6
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9
[ebuild   R   ] dev-lang/python-2.6.4
[ebuild   R   ] dev-libs/libxml2-2.7.6
[ebuild   R   ] sys-libs/cracklib-2.8.15
[ebuild   R   ] sys-apps/file-5.03
[ebuild   R   ] dev-libs/libxslt-1.1.26
[ebuild   R   ] x11-proto/xcb-proto-1.6
[ebuild   R   ] x11-libs/libxcb-1.5
[ebuild   R   ] x11-libs/libX11-1.3.2
[ebuild   R   ] x11-libs/libXt-1.0.7-r1
[ebuild   R   ] x11-libs/libXext-1.1.1
[ebuild   R   ] x11-libs/libXmu-1.0.5
[ebuild   R   ] x11-libs/libXpm-3.5.8
[ebuild   R   ] x11-apps/xauth-1.0.4
[ebuild   R   ] x11-libs/libXaw-1.0.7
[ebuild   R   ] sys-apps/groff-1.20.1-r2
[ebuild   R   ] sys-libs/glibc-2.9_p20081201-r2
[ebuild   R   ] sys-libs/pam-1.1.1
[ebuild   R   ] sys-devel/gcc-4.3.3-r2
[ebuild   R   ] sys-apps/iproute2-2.6.31
[ebuild   R   ] sys-apps/openrc-0.6.0
[ebuild   R   ] sys-apps/shadow-4.1.4.2-r1
[ebuild   R   ] app-admin/eselect-python-20091230
[ebuild   R   ] sys-apps/busybox-1.13.4
[ebuild   R   ] sys-apps/man-1.6f-r3
[ebuild   R   ] net-misc/openssh-5.3_p1-r1
[ebuild   R   ] sys-apps/man-pages-3.23


Estimated update time: 52 minutes.
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Sat Jan 02, 2010 10:07 pm    Post subject: Reply with quote

Ouch Quick23t, it's pretty fast :P
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
Quick23t
n00b
n00b


Joined: 07 Aug 2009
Posts: 66
Location: Phoenix, AZ

PostPosted: Sun Jan 03, 2010 12:37 am    Post subject: Reply with quote

Sure beats the days of compiling on a P2..
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Sun Jan 03, 2010 2:15 am    Post subject: Reply with quote

On a P1 :P
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
regomodo
Guru
Guru


Joined: 25 Mar 2008
Posts: 445

PostPosted: Sun Jan 03, 2010 11:43 am    Post subject: Reply with quote

Quick23t wrote:
Sure beats the days of compiling on a P2..


I was doing that until just over a week ago.
Back to top
View user's profile Send private message
durian
Guru
Guru


Joined: 16 Jul 2003
Posts: 312
Location: Margretetorp

PostPosted: Sun Jan 03, 2010 12:45 pm    Post subject: Reply with quote

Code:
vondel ~ # emerge -ep system | genlop -p
These are the pretended packages: (this may take a while; wait...)

[ebuild   R   ] sys-apps/portage-2.1.6.13
[ebuild   R   ] virtual/libintl-0
[ebuild   R   ] sys-libs/zlib-1.2.3-r1
[ebuild   R   ] sys-devel/gnuconfig-20090203
[ebuild   R   ] virtual/libiconv-0
[ebuild   R   ] app-misc/pax-utils-0.1.19
[ebuild   R   ] app-arch/bzip2-1.0.5-r1
[ebuild   R   ] dev-libs/gmp-4.3.1
[ebuild   R   ] sys-devel/gcc-config-1.4.1
[ebuild   R   ] dev-libs/expat-2.0.1-r2
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8
[ebuild   R   ] app-misc/mime-types-8
[ebuild   R   ] app-admin/python-updater-0.7
[ebuild   R   ] sys-devel/autoconf-wrapper-7
[ebuild   R   ] dev-db/mysql-init-scripts-1.2
[ebuild   R   ] sys-devel/automake-wrapper-3-r1
[ebuild     U ] sys-libs/timezone-data-2009s [2009p]
[ebuild   R   ] sys-devel/patch-2.5.9
[ebuild   R   ] app-arch/cpio-2.9-r2
[ebuild   R   ] sys-apps/which-2.20
[ebuild   R   ] app-arch/lzma-utils-4.32.7
[ebuild   R   ] dev-util/pkgconfig-0.23
[ebuild   R   ] app-portage/portage-utils-0.2.1
[ebuild   R   ] sys-kernel/linux-headers-2.6.27-r2
[ebuild   R   ] sys-devel/m4-1.4.12
[ebuild   R   ] sys-apps/sandbox-1.6-r2
[ebuild     U ] dev-libs/mpfr-2.4.1_p5 [2.4.1_p1]
[ebuild   R   ] sys-apps/sysvinit-2.86-r10
[ebuild   R   ] net-misc/iputils-20071127
[ebuild   R   ] virtual/init-0
[ebuild   R   ] sys-apps/debianutils-3.1.3
[ebuild   R   ] virtual/acl-0
[ebuild   R   ] sys-auth/pambase-20090620.1-r1
[ebuild   R   ] virtual/mysql-5.0
[ebuild   R   ] sys-apps/baselayout-1.12.13
[ebuild   R   ] sys-process/procps-3.2.8
[ebuild   R   ] virtual/libffi-0
[ebuild   R   ] virtual/postgresql-base-8.1
[ebuild   R   ] virtual/perl-Sys-Syslog-0.27
[ebuild   R   ] virtual/perl-File-Spec-3.30
[ebuild   R   ] virtual/perl-Storable-2.20
[ebuild   R   ] sys-devel/binutils-config-1.9-r4
[ebuild   R   ] sys-apps/man-pages-posix-2003a
[ebuild   R   ] virtual/perl-Module-Build-0.34.0201
[ebuild   R   ] virtual/perl-ExtUtils-CBuilder-0.26.03
[ebuild   R   ] virtual/perl-IO-Compress-2.021
[ebuild   R   ] virtual/perl-Archive-Tar-1.54
[ebuild   R   ] virtual/perl-Test-Harness-3.17
[ebuild   R   ] virtual/perl-ExtUtils-ParseXS-2.20.0401
[ebuild   R   ] virtual/perl-IO-Zlib-1.09
[ebuild   R   ] virtual/perl-Package-Constants-0.02
[ebuild   R   ] virtual/perl-Scalar-List-Utils-1.21
[ebuild   R   ] virtual/perl-Compress-Raw-Bzip2-2.021
[ebuild   R   ] virtual/perl-Compress-Raw-Zlib-2.021
[ebuild   R   ] sys-devel/gettext-0.17
[ebuild   R   ] sys-devel/flex-2.5.35
[ebuild   R   ] sys-apps/findutils-4.4.0
[ebuild   R   ] sys-devel/bison-2.3
[ebuild   R   ] sys-devel/make-3.81
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2
[ebuild     U ] dev-libs/popt-1.15 [1.14]
[ebuild   R   ] app-arch/gzip-1.3.12-r1
[ebuild   R   ] sys-apps/kbd-1.15
[ebuild   R   ] sys-apps/net-tools-1.60_p20071202044231-r1
[ebuild   R   ] sys-apps/gawk-3.1.6
[ebuild   R   ] app-arch/tar-1.20
[ebuild   R   ] sys-devel/binutils-2.18-r3
[ebuild   R   ] sys-apps/man-1.6f-r3
[ebuild   R   ] sys-apps/man-pages-3.22
[ebuild   R   ] dev-lang/perl-5.8.8-r8
[ebuild   R   ] perl-core/Sys-Syslog-0.27
[ebuild   R   ] perl-core/Storable-2.20
[ebuild   R   ] dev-perl/Net-Daemon-0.43
[ebuild   R   ] perl-core/Test-Harness-3.17
[ebuild   R   ] perl-core/Package-Constants-0.02
[ebuild   R   ] perl-core/Compress-Raw-Bzip2-2.021
[ebuild   R   ] perl-core/Compress-Raw-Zlib-2.021
[ebuild   R   ] perl-core/Scalar-List-Utils-1.21
[ebuild   R   ] dev-perl/yaml-0.68
[ebuild     U ] dev-perl/Locale-gettext-1.05-r1 [1.05]
[ebuild   R   ] dev-perl/PlRPC-0.2020-r1
[ebuild   R   ] perl-core/IO-Compress-2.021
[ebuild     U ] sys-apps/help2man-1.36.4-r1 [1.36.4]
[ebuild   R   ] perl-core/IO-Zlib-1.09
[ebuild   R   ] perl-core/Archive-Tar-1.54
[ebuild   R   ] perl-core/Module-Build-0.34.0201
[ebuild   R   ] perl-core/ExtUtils-CBuilder-0.26.03
[ebuild   R   ] perl-core/File-Spec-3.30
[ebuild   R   ] perl-core/ExtUtils-ParseXS-2.20.0401
[ebuild   R   ] dev-perl/DBI-1.609
[ebuild   R   ] sys-devel/autoconf-2.63-r1
[ebuild   R   ] sys-libs/ncurses-5.6-r2
[ebuild   R   ] sys-apps/texinfo-4.13
[ebuild   R   ] app-shells/bash-4.0_p35
[ebuild   R   ] sys-apps/util-linux-2.16.1
[ebuild   R   ] sys-apps/less-436
[ebuild   R   ] app-editors/nano-2.1.10
[ebuild   R   ] sys-libs/gpm-1.20.5
[ebuild   R   ] sys-devel/automake-1.10.2
[ebuild   R   ] app-admin/perl-cleaner-1.05
[ebuild   R   ] virtual/editor-0
[ebuild   R   ] virtual/pager-0
[ebuild   R   ] sys-apps/ed-1.0
[ebuild   R   ] sys-devel/libtool-2.2.6b
[ebuild   R   ] sys-libs/readline-6.0_p3
[ebuild   R   ] sys-libs/db-4.7.25_p4
[ebuild   R   ] dev-libs/libffi-3.0.8
[ebuild   R   ] sys-apps/attr-2.4.43
[ebuild   R   ] sys-apps/groff-1.20.1-r1
[ebuild   R   ] dev-libs/libpcre-7.9-r1
[ebuild   R   ] sys-process/psmisc-22.7
[ebuild   R   ] sys-apps/acl-2.2.47
[ebuild   R   ] sys-libs/gdbm-1.8.3-r3
[ebuild     U ] dev-db/sqlite-3.6.20-r1 [3.6.19] USE="-fts3%"
[ebuild   R   ] sys-apps/grep-2.5.4-r1
[ebuild   R   ] sys-devel/bc-1.06.95
[ebuild   R   ] sys-apps/sed-4.2
[ebuild   R   ] sys-apps/coreutils-7.5-r1
[ebuild   R   ] net-misc/rsync-3.0.6
[ebuild   R   ] sys-devel/libperl-5.8.8-r2
[ebuild   R   ] sys-apps/module-init-tools-3.5
[ebuild   R   ] sys-kernel/gentoo-sources-2.6.31-r6
[ebuild     U ] app-admin/eselect-1.2.8 [1.2.3]
[ebuild   R   ] app-admin/eselect-python-20090824
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9
[ebuild   R   ] app-crypt/mit-krb5-1.6.3-r6
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2
[ebuild   R   ] dev-lang/python-2.6.4
[ebuild   R   ] app-misc/ca-certificates-20090709
[ebuild   R   ] net-misc/wget-1.12
[ebuild   R   ] sys-libs/cracklib-2.8.13-r1
[ebuild   R   ] sys-apps/file-5.03
[ebuild   R   ] dev-libs/libxml2-2.7.3-r2
[ebuild   R   ] sys-libs/pam-1.1.0
[ebuild   R   ] dev-db/libpq-8.1.11
[ebuild   R   ] sys-apps/shadow-4.1.2.2
[ebuild   R   ] sys-apps/busybox-1.14.2
[ebuild   R   ] sys-libs/glibc-2.9_p20081201-r2
[ebuild   R   ] sys-devel/gcc-4.3.4
[ebuild   R   ] sys-fs/udev-146-r1
[ebuild   R   ] dev-db/mysql-5.0.84-r1
[ebuild   R   ] dev-perl/DBD-mysql-4.00.5
[ebuild   R   ] net-nds/openldap-2.4.19-r1
[ebuild   R   ] dev-libs/cyrus-sasl-2.1.23-r1
[ebuild   R   ] net-misc/openssh-5.2_p1-r3

Estimated update time: 4 hours, 58 minutes.


Small home server (AMD Athlon(tm) 64 X2 Dual Core Processor 4200+). My i7 920 is switched off at the moment :)

-peter
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Sun Jan 03, 2010 3:53 pm    Post subject: Reply with quote

regomodo wrote:
Quick23t wrote:
Sure beats the days of compiling on a P2..


I was doing that until just over a week ago.


I felt your pain :P
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
warrens
Apprentice
Apprentice


Joined: 04 Jan 2005
Posts: 223
Location: Don't Tread On Me!

PostPosted: Sun Jan 03, 2010 10:10 pm    Post subject: Reply with quote

My previous posted time for this machine was for 64 bit, multilib. I did a test run on my testing disk with settings for 32 bit.
The results are:
Code:
[ebuild   R   ] sys-apps/portage-2.2_rc61
[ebuild   R   ] virtual/libintl-0         
[ebuild   R   ] sys-libs/zlib-1.2.3-r1   
[ebuild   R   ] sys-devel/gnuconfig-20090819
[ebuild   R   ] dev-libs/expat-2.0.1-r2     
[ebuild   R   ] dev-libs/gmp-4.3.1           
[ebuild   R   ] virtual/libiconv-0           
[ebuild   R   ] app-misc/pax-utils-0.1.19   
[ebuild   R   ] sys-devel/gcc-config-1.4.1   
[ebuild   R   ] app-portage/portage-utils-0.2.1
[ebuild   R   ] sys-devel/automake-wrapper-4   
[ebuild   R   ] app-arch/bzip2-1.0.5-r1         
[ebuild   R   ] sys-apps/miscfiles-1.4.2-r1     
[ebuild   R   ] app-misc/mime-types-8           
[ebuild   R   ] app-admin/python-updater-0.7   
[ebuild   R   ] sys-devel/autoconf-wrapper-8   
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8   
[ebuild   R   ] sys-libs/timezone-data-2009u   
[ebuild   R   ] dev-libs/oniguruma-5.9.1       
[ebuild   R   ] media-libs/jpeg-7               
[ebuild   R   ] dev-libs/libffi-3.0.9           
[ebuild   R   ] sys-devel/patch-2.6.1           
[ebuild   R   ] app-arch/cpio-2.10             
[ebuild   R   ] sys-apps/which-2.20             
[ebuild   R   ] dev-util/pkgconfig-0.23         
[ebuild   R   ] app-arch/xz-utils-4.999.9_beta 
[ebuild   R   ] media-sound/alsa-headers-1.0.21
[ebuild   R   ] sys-devel/m4-1.4.13             
[ebuild   R   ] sys-kernel/linux-headers-2.6.30-r1
[ebuild   R   ] sys-apps/sandbox-2.2               
[ebuild   R   ] media-libs/libpng-1.2.41           
[ebuild   R   ] dev-libs/mpfr-2.4.2_p1             
[ebuild   R   ] dev-java/java-config-wrapper-0.16 
[ebuild   R   ] virtual/libffi-0                   
[ebuild   R   ] sys-apps/net-tools-1.60_p20100101055920
[ebuild   R   ] sys-apps/sysvinit-2.87-r1               
[ebuild   R   ] net-misc/iputils-20071127-r2           
[ebuild   R   ] virtual/init-0                         
[ebuild   R   ] sys-apps/baselayout-2.0.1               
[ebuild   R   ] sys-apps/module-init-tools-3.11.1       
[ebuild   R   ] sys-apps/debianutils-3.2.2             
[ebuild   R   ] app-shells/bash-completion-1.1-r5       
[ebuild   R   ] app-shells/gentoo-bashcomp-20091225     
[ebuild   R   ] sys-auth/pambase-20090620.1-r1         
[ebuild   R   ] virtual/acl-0                           
[ebuild   R   ] virtual/jdk-1.6.0                       
[ebuild   R   ] virtual/jre-1.6.0                       
[ebuild   R   ] app-admin/eselect-vi-1.1.6             
[ebuild   R   ] app-admin/eselect-fontconfig-1.1       
[ebuild   R   ] sys-devel/binutils-config-2             
[ebuild   R   ] sys-apps/man-pages-posix-2003a         
[ebuild   R   ] app-i18n/man-pages-zh_CN-1.5           
[ebuild   R   ] app-i18n/man-pages-ja-20070515         
[ebuild   R   ] app-admin/gamin-0.1.10                 
[ebuild   R   ] app-admin/eselect-ctags-1.13           
[ebuild   R   ] dev-util/ctags-5.8                     
[ebuild   R   ] sys-devel/autoconf-2.65                 
[ebuild   R   ] sys-devel/automake-1.10.3               
[ebuild   R   ] sys-devel/libtool-2.2.6b               
[ebuild   R   ] dev-lang/tcl-8.5.7                     
[ebuild   R   ] x11-misc/util-macros-1.4.1             
[ebuild   R   ] sys-devel/gettext-0.17                 
[ebuild   R   ] sys-apps/sed-4.2.1                     
[ebuild   R   ] sys-devel/flex-2.5.35                   
[ebuild   R   ] dev-libs/glib-2.22.3                   
[ebuild   R   ] sys-apps/findutils-4.5.5               
[ebuild   R   ] sys-devel/make-3.81                     
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2             
[ebuild   R   ] sys-apps/attr-2.4.43                   
[ebuild   R   ] dev-libs/popt-1.15                     
[ebuild   R   ] app-arch/gzip-1.3.14                   
[ebuild   R   ] sys-apps/kbd-1.15.1                     
[ebuild   R   ] sys-apps/gawk-3.1.7                     
[ebuild   R   ] app-arch/tar-1.22                       
[ebuild   R   ] dev-libs/libgpg-error-1.7               
[ebuild   R   ] sys-devel/binutils-2.20                 
[ebuild   R   ] sys-apps/acl-2.2.47-r1                 
[ebuild   R   ] dev-libs/libpcre-8.00                   
[ebuild   R   ] sys-devel/bison-2.4.1                   
[ebuild   R   ] net-misc/rsync-3.0.6                   
[ebuild   R   ] dev-libs/libgcrypt-1.4.5               
[ebuild   R   ] x11-proto/xproto-7.0.16                 
[ebuild   R   ] x11-proto/xextproto-7.1.1               
[ebuild   R   ] x11-libs/xtrans-1.2.5                   
[ebuild   R   ] x11-proto/inputproto-2.0               
[ebuild   R   ] x11-proto/kbproto-1.0.4                 
[ebuild   R   ] dev-libs/libpthread-stubs-0.1           
[ebuild   R   ] x11-proto/recordproto-1.14             
[ebuild   R   ] sys-apps/grep-2.5.4-r1                 
[ebuild   R   ] x11-proto/renderproto-0.11             
[ebuild   R   ] x11-proto/xf86bigfontproto-1.2.0       
[ebuild   R   ] x11-libs/libXau-1.0.5                   
[ebuild   R   ] x11-libs/libICE-1.0.6                   
[ebuild   R   ] x11-libs/libXdmcp-1.0.3                 
[ebuild   R   ] sys-apps/man-1.6f-r3                   
[ebuild   R   ] sys-apps/man-pages-3.23                 
[ebuild   R   ] sys-kernel/gentoo-sources-2.6.32-r1     
[ebuild   R   ] sys-libs/ncurses-5.7-r3                 
[ebuild   R   ] app-shells/bash-4.0_p35                 
[ebuild   R   ] sys-apps/texinfo-4.13                   
[ebuild   R   ] sys-apps/coreutils-8.2                 
[ebuild   R   ] sys-libs/gpm-1.20.6                     
[ebuild   R   ] app-editors/nano-2.2.1                 
[ebuild   R   ] sys-apps/less-436                       
[ebuild   R   ] sys-process/psmisc-22.7                 
[ebuild   R   ] sys-process/procps-3.2.8               
[ebuild   R   ] sys-libs/readline-6.0_p4               
[ebuild   R   ] virtual/editor-0                       
[ebuild   R   ] virtual/pager-0                         
[ebuild   R   ] dev-db/sqlite-3.6.21                   
[ebuild   R   ] sys-libs/slang-2.2.2                   
[ebuild   R   ] sys-devel/bc-1.06.95                   
[ebuild   R   ] app-admin/eselect-1.2.9                 
[ebuild   R   ] app-editors/vim-core-7.2.303           
[ebuild   R   ] app-misc/ca-certificates-20090709       
[ebuild   R   ] app-admin/perl-cleaner-1.05             
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9         
[ebuild   R   ] x11-libs/libX11-1.3.2                   
[ebuild   R   ] x11-libs/libXext-1.1.1                 
[ebuild   R   ] media-libs/freetype-2.3.11             
[ebuild   R   ] x11-libs/libXrender-0.9.5               
[ebuild   R   ] media-libs/fontconfig-2.8.0             
[ebuild   R   ] x11-libs/libXi-1.3                     
[ebuild   R   ] x11-libs/libXtst-1.1.0                 
[ebuild   R   ] x11-libs/libXft-2.1.14                 
[ebuild   R   ] dev-lang/python-2.6.4                   
[ebuild   R   ] sys-libs/cracklib-2.8.15               
[ebuild   R   ] media-libs/alsa-lib-1.0.21a             
[ebuild   R   ] dev-lang/perl-5.8.8-r8                 
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2             
[ebuild   R   ] sys-apps/util-linux-2.16.2             
[ebuild   R   ] app-editors/vim-7.2.303                 
[ebuild   R   ] dev-perl/Locale-gettext-1.05-r1         
[ebuild   R   ] x11-libs/libSM-1.1.1                   
[ebuild   R   ] app-vim/pam-syntax-20060424             
[ebuild   R   ] app-vim/gentoo-syntax-20090720         
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9                 
[ebuild   R   ] net-misc/wget-1.12                     
[ebuild   R   ] sys-apps/help2man-1.36.4-r1             
[ebuild   R   ] x11-libs/libXt-1.0.7-r1                 
[ebuild   R   ] sys-devel/automake-1.11.1               
[ebuild   R   ] x11-libs/libXmu-1.0.5                   
[ebuild   R   ] dev-lang/tk-8.5.7-r1                   
[ebuild   R   ] sys-apps/dbus-1.2.12                   
[ebuild   R   ] x11-libs/libXpm-3.5.8                   
[ebuild   R   ] media-libs/giflib-4.1.6-r1             
[ebuild   R   ] x11-apps/xauth-1.0.4                   
[ebuild   R   ] dev-libs/dbus-glib-0.82                 
[ebuild   R   ] x11-libs/libXaw-1.0.7                   
[ebuild   R   ] sys-apps/groff-1.20.1-r2               
[ebuild   R   ] app-admin/eselect-python-20091230       
[ebuild   R   ] dev-libs/libxml2-2.7.6                 
[ebuild   R   ] dev-java/java-config-2.1.10             
[ebuild   R   ] dev-libs/libgamin-0.1.10-r2             
[ebuild   R   ] sys-apps/file-5.03                     
[ebuild   R   ] sys-libs/db-4.8.24                     
[ebuild   R   ] app-admin/gam-server-0.1.10             
[ebuild   R   ] sys-libs/db-4.7.25_p4                   
[ebuild   R   ] dev-libs/libxslt-1.1.26
[ebuild   R   ] x11-proto/xcb-proto-1.6
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4
[ebuild   R   ] x11-libs/libxcb-1.5
[ebuild   R   ] sys-devel/libperl-5.8.8-r2
[ebuild   R   ] sys-libs/glibc-2.11-r1
[ebuild   R   ] sys-libs/pam-1.1.1
[ebuild   R   ] sys-devel/gcc-4.4.2
[ebuild   R   ] sys-fs/udev-149
[ebuild   R   ] sys-apps/shadow-4.1.4.2-r1
[ebuild   R   ] sys-auth/consolekit-0.4.1
[ebuild   R   ] sys-apps/openrc-0.6.0
[ebuild   R   ] dev-java/icedtea6-bin-1.6.2
[ebuild   R   ] sys-apps/busybox-1.15.3
[ebuild   R   ] net-misc/openssh-5.3_p1-r1


Estimated update time: 1 hour, 3 minutes.

While not as fast as CoreI7 920's it is over 3 hours quicker than my ol P4c 3.2GHz system that was originally in this case and 13 mins faster than 64 bit. Got to love these quad cores :lol:
_________________
The BIGGER the GOVERNMENT, the smaller the citizen.

DON'T TREAD ON ME!!!

My Bias #1
The best government is the government that governs least.
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Mon Jan 04, 2010 3:52 am    Post subject: Reply with quote

In fact, and we use all the cores at least :P
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
H0bb3z
Tux's lil' helper
Tux's lil' helper


Joined: 28 May 2003
Posts: 121
Location: in the transmogrifier

PostPosted: Wed Jan 13, 2010 1:14 am    Post subject: Reply with quote

unlocked Intel QX9770 Quad Core Extreme @3.2GHz per core
6Gb PC12800 DDR3 RAM
ATI 4870 HD 1Gb video
Gigabyte P45 mobo

Code:
emerge -ep system | genlop -p
These are the pretended packages: (this may take a while; wait...)

[ebuild   R   ] sys-apps/portage-2.2_rc61
[ebuild   R   ] virtual/libintl-0
[ebuild   R   ] sys-libs/zlib-1.2.3-r1
[ebuild   R   ] sys-devel/gnuconfig-20090203
[ebuild   R   ] virtual/libiconv-0
[ebuild   R   ] dev-libs/expat-2.0.1-r2
[ebuild   R   ] app-misc/pax-utils-0.1.19
[ebuild   R   ] app-arch/bzip2-1.0.5-r1
[ebuild   R   ] dev-libs/gmp-4.3.1
[ebuild   R   ] sys-devel/autoconf-wrapper-7
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8
[ebuild   R   ] sys-devel/automake-wrapper-3-r1
[ebuild   R   ] app-misc/mime-types-8
[ebuild   R   ] app-admin/python-updater-0.7
[ebuild   R   ] sys-libs/timezone-data-2009s
[ebuild   R   ] sys-devel/patch-2.5.9
[ebuild   R   ] app-arch/cpio-2.9-r2
[ebuild   R   ] net-dns/openresolv-3.3.2
[ebuild   R   ] sys-apps/which-2.20
[ebuild   R   ] sys-apps/funtoo-netscripts-1.1
[ebuild   R   ] dev-util/pkgconfig-0.23
[ebuild   R   ] app-arch/lzma-utils-4.32.7
[ebuild   R   ] app-portage/portage-utils-0.2.1
[ebuild   R   ] dev-util/gtk-doc-am-1.11
[ebuild   R   ] sys-devel/m4-1.4.12
[ebuild   R   ] sys-kernel/linux-headers-2.6.27-r2
[ebuild   R   ] sys-apps/sandbox-2.2
[ebuild   R   ] dev-libs/mpfr-2.4.1_p5
[ebuild   R   ] sys-apps/sysvinit-2.86-r11
[ebuild   R   ] net-misc/iputils-20071127
[ebuild   R   ] virtual/init-0
[ebuild   R   ] sys-apps/baselayout-2.1.6
[ebuild   R   ] sys-apps/debianutils-3.1.3
[ebuild   R   ] sys-devel/libperl-5.10.1-r11
[ebuild   R   ] sys-auth/pambase-20090620.1-r1
[ebuild   R   ] virtual/acl-0
[ebuild   R   ] app-admin/eselect-vi-1.1.6
[ebuild   R   ] sys-devel/gcc-config-1.4.1
[ebuild   R   ] sys-devel/binutils-config-1.9-r4
[ebuild   R   ] sys-apps/man-pages-posix-2003a
[ebuild   R   ] virtual/libffi-0
[ebuild   R   ] app-admin/eselect-ctags-1.10
[ebuild   R   ] dev-util/ctags-5.7
[ebuild   R   ] sys-devel/autoconf-2.63-r1
[ebuild   R   ] sys-devel/automake-1.10.2
[ebuild   R   ] sys-devel/libtool-2.2.6b
[ebuild   R   ] sys-fs/udev-135-r9
[ebuild   R   ] dev-libs/libffi-3.0.8
[ebuild   R   ] x11-misc/util-macros-1.3.0
[ebuild   R   ] sys-devel/gettext-0.17
[ebuild   R   ] sys-apps/sed-4.2
[ebuild   R   ] sys-devel/flex-2.5.35
[ebuild   R   ] sys-apps/findutils-4.4.0
[ebuild   R   ] dev-libs/glib-2.20.5-r1
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2
[ebuild   R   ] sys-apps/attr-2.4.43
[ebuild   R   ] dev-libs/popt-1.15
[ebuild   R   ] app-arch/gzip-1.3.12-r1
[ebuild   R   ] sys-apps/kbd-1.15
[ebuild   R   ] sys-apps/gawk-3.1.6
[ebuild   R   ] app-arch/tar-1.20
[ebuild   R   ] sys-devel/make-3.81
[ebuild   R   ] sys-apps/net-tools-1.60_p20090728014017-r1
[ebuild   R   ] dev-libs/libgpg-error-1.7
[ebuild   R   ] sys-devel/binutils-2.19.1-r1
[ebuild   R   ] sys-apps/acl-2.2.47
[ebuild   R   ] sys-devel/bison-2.4.1
[ebuild   R   ] net-misc/rsync-3.0.6
[ebuild   R   ] dev-libs/libpcre-7.9-r1
[ebuild   R   ] sys-apps/module-init-tools-3.5
[ebuild   R   ] dev-libs/libgcrypt-1.4.4
[ebuild   R   ] x11-proto/xproto-7.0.16
[ebuild   R   ] sys-libs/db-4.7.25_p4
[ebuild   R   ] x11-libs/xtrans-1.2.5
[ebuild   R   ] x11-proto/kbproto-1.0.4
[ebuild   R   ] x11-proto/inputproto-1.5.1
[ebuild   R   ] dev-libs/libpthread-stubs-0.1
[ebuild   R   ] sys-apps/grep-2.5.4-r1
[ebuild   R   ] x11-proto/bigreqsproto-1.1.0
[ebuild   R   ] x11-proto/xcmiscproto-1.2.0
[ebuild     U ] x11-proto/xf86bigfontproto-1.2.0 [1.1.2]
[ebuild   R   ] x11-proto/xextproto-7.0.5
[ebuild   R   ] x11-libs/libICE-1.0.6
[ebuild   R   ] x11-libs/libXau-1.0.5
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4
[ebuild   R   ] x11-libs/libXdmcp-1.0.3
[ebuild   R   ] dev-lang/perl-5.10.1-r12
[ebuild     U ] dev-perl/Locale-gettext-1.05-r1 [1.05]
[ebuild     U ] sys-apps/help2man-1.36.4-r1 [1.36.4]
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2
[ebuild   R   ] net-misc/wget-1.12
[ebuild   R   ] sys-libs/ncurses-5.7-r3
[ebuild   R   ] app-shells/bash-4.0_p28
[ebuild   R   ] sys-apps/texinfo-4.13
[ebuild   R   ] sys-apps/coreutils-7.5-r1
[ebuild   R   ] sys-apps/util-linux-2.16.1
[ebuild   R   ] sys-libs/gpm-1.20.5
[ebuild   R   ] app-editors/nano-2.1.10
[ebuild   R   ] sys-apps/less-436
[ebuild   R   ] sys-process/procps-3.2.8
[ebuild   R   ] sys-process/psmisc-22.7
[ebuild   R   ] sys-libs/readline-6.0_p3
[ebuild   R   ] x11-libs/libSM-1.1.1
[ebuild   R   ] app-misc/ca-certificates-20090709
[ebuild   R   ] app-admin/perl-cleaner-2_pre091219
[ebuild   R   ] virtual/editor-0
[ebuild   R   ] virtual/pager-0
[ebuild   R   ] dev-db/sqlite-3.6.20-r1
[ebuild   R   ] sys-devel/bc-1.06.95
[ebuild   R   ] app-admin/eselect-1.2.9
[ebuild   R   ] app-admin/eselect-python-20090824
[ebuild   R   ] dev-lang/python-2.6.4
[ebuild   R   ] dev-libs/libxml2-2.7.3-r2
[ebuild   R   ] sys-libs/cracklib-2.8.13-r1
[ebuild   R   ] sys-apps/file-5.03
[ebuild   R   ] dev-libs/libxslt-1.1.26
[ebuild   R   ] x11-proto/xcb-proto-1.5
[ebuild   R   ] x11-libs/libxcb-1.4-r1
[ebuild   R   ] x11-libs/libX11-1.2.2
[ebuild   R   ] x11-libs/libXt-1.0.7-r1
[ebuild   R   ] x11-libs/libXext-1.0.5
[ebuild   R   ] x11-libs/libXmu-1.0.5
[ebuild   R   ] sys-apps/dbus-1.2.3-r1
[ebuild   R   ] x11-libs/libXpm-3.5.8
[ebuild   R   ] dev-libs/dbus-glib-0.76
[ebuild   R   ] x11-apps/xauth-1.0.4
[ebuild   R   ] x11-libs/libXaw-1.0.7
[ebuild   R   ] sys-apps/groff-1.20.1-r1
[ebuild   R   ] app-editors/vim-core-7.2.182
[ebuild   R   ] app-editors/vim-7.2.182
[ebuild   R   ] app-vim/pam-syntax-20060424
[ebuild   R   ] app-vim/gentoo-syntax-20090220
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9
[ebuild   R   ] sys-libs/pam-1.1.0
[ebuild   R   ] sys-apps/shadow-4.1.2.2
[ebuild   R   ] sys-auth/consolekit-0.3.0-r2
[ebuild   R   ] sys-apps/busybox-1.13.4
[ebuild   R   ] sys-apps/man-1.6f-r3
[ebuild   R   ] net-misc/openssh-5.2_p1-r3
[ebuild   R   ] sys-apps/man-pages-3.22
[ebuild   R   ] sys-libs/glibc-2.9_p20081201-r2
[ebuild   R   ] sys-apps/openrc-0.6.0
[ebuild   R   ] sys-devel/gcc-4.3.3-r2
[ebuild   R   ] sys-apps/iproute2-2.6.29.1-r1

Estimated update time: 59 minutes.


Not too shabby! I wonder how fast it would be if I overclocked... :twisted:
_________________
-H0bb3z-
-----------
Intel QX9770 | 6Gb DDR3 | ATI 4870 HD 1Gb | 2xSeagate 1Tb SATAs
Running Funtoo Core2 build


Last edited by H0bb3z on Wed Jan 13, 2010 4:12 am; edited 1 time in total
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Wed Jan 13, 2010 3:59 am    Post subject: Reply with quote

Did you run with any tweak like custom cflags or with some EMERGE_DEFAULT_OPTS ?
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
H0bb3z
Tux's lil' helper
Tux's lil' helper


Joined: 28 May 2003
Posts: 121
Location: in the transmogrifier

PostPosted: Wed Jan 13, 2010 4:09 am    Post subject: Reply with quote

Nothing too extravagant: (snipped from emerge --info)
Code:
CFLAGS="-march=core2 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=core2 -O2 -pipe"
MAKEOPTS="-j4"


I run the funtoo git branch with core2 optimizations. More info about that here

My CPU is actually one of the rare unlocked versions of the QX9770, but I'm not certain that makes too much difference. The on-die caching is huge though, so this may have something to do with the performance...
_________________
-H0bb3z-
-----------
Intel QX9770 | 6Gb DDR3 | ATI 4870 HD 1Gb | 2xSeagate 1Tb SATAs
Running Funtoo Core2 build
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Wed Jan 13, 2010 12:38 pm    Post subject: Reply with quote

You should try this at least : MAKEOPTS="-j5"

Number of cores + 1 = 5 :P
_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
H0bb3z
Tux's lil' helper
Tux's lil' helper


Joined: 28 May 2003
Posts: 121
Location: in the transmogrifier

PostPosted: Fri Jan 15, 2010 4:26 am    Post subject: Reply with quote

I did, but I had to scale it back to allow some ebuild to fully compile and haven't changed it back. It's pretty fast already and haven't really noticed a difference!

Note: I reran the test and it still reports 59 minutes after the -j5 update...
_________________
-H0bb3z-
-----------
Intel QX9770 | 6Gb DDR3 | ATI 4870 HD 1Gb | 2xSeagate 1Tb SATAs
Running Funtoo Core2 build
Back to top
View user's profile Send private message
d2_racing
Moderator
Moderator


Joined: 25 Apr 2005
Posts: 13046
Location: Ste-Foy,Canada

PostPosted: Fri Jan 15, 2010 12:52 pm    Post subject: Reply with quote

If you have some time, try that :

Code:

MAKEOPTS="-j5 -l5"
EMERGE_DEFAULT_OPTS="--jobs=5 --load-average=5.0 --with-bdeps y"

_________________
Sysadmin of GentooQuébec.org
Wiki
Signature
IRC on Freenode : #gentoo-quebec
Back to top
View user's profile Send private message
Jupiler
n00b
n00b


Joined: 29 Jul 2003
Posts: 16

PostPosted: Sat May 01, 2010 10:36 am    Post subject: Reply with quote

Device InformationBlade
Type Server Blade
Manufacturer HP
Product Name ProLiant BL685c G6
CPU and Memory Information
CPU 1 Six-Core AMD Opteron, 2600 MHz
CPU 2 Six-Core AMD Opteron, 2600 MHz
CPU 3 Six-Core AMD Opteron, 2600 MHz
CPU 4 Six-Core AMD Opteron, 2600 MHz
Memory 65536 MB

Disks on Netapp san
20TB netto

Don't have the compile times here :(
Back to top
View user's profile Send private message
madchaz
l33t
l33t


Joined: 01 Jul 2003
Posts: 979
Location: Quebec, Canada

PostPosted: Fri Jun 11, 2010 1:55 pm    Post subject: Reply with quote

Jupiler wrote:
Device InformationBlade
Type Server Blade
Manufacturer HP
Product Name ProLiant BL685c G6
CPU and Memory Information
CPU 1 Six-Core AMD Opteron, 2600 MHz
CPU 2 Six-Core AMD Opteron, 2600 MHz
CPU 3 Six-Core AMD Opteron, 2600 MHz
CPU 4 Six-Core AMD Opteron, 2600 MHz
Memory 65536 MB

Disks on Netapp san
20TB netto

Don't have the compile times here :(


*whistle* That's a nice machine. That's 24 cores, lol. I don't think you'd have much compilation time on that, lol.
_________________
Someone asked me once if I suffered from mental illness. I told him I enjoyed every second of it.
www.madchaz.com Under heavy reconstruction. Bring a hardhat.
Back to top
View user's profile Send private message
luscinius
n00b
n00b


Joined: 17 Jul 2008
Posts: 63

PostPosted: Thu Oct 07, 2010 4:47 pm    Post subject: Reply with quote

Xeon W3520 (essentially i7-920) and Quadro FX580 (9500GT) at work.
Code:

emerge -ep system | genlop -p
These are the pretended packages: (this may take a while; wait...)

[ebuild   R   ] sys-libs/zlib-1.2.3-r1
[ebuild   R   ] virtual/libintl-0
[ebuild   R   ] dev-libs/expat-2.0.1-r3
[ebuild   R   ] sys-devel/gnuconfig-20100122
[ebuild   R   ] app-arch/bzip2-1.0.6
[ebuild   R   ] virtual/libiconv-0
[ebuild   R   ] media-libs/jpeg-8b
[ebuild   R   ] app-misc/pax-utils-0.2.1
[ebuild   R   ] dev-libs/gmp-4.3.2
[ebuild   R   ] sys-devel/gcc-config-1.4.1
[ebuild   R   ] app-misc/mime-types-8
[ebuild   R   ] app-text/libpaper-1.1.23
[ebuild   R   ] app-arch/cpio-2.11
[ebuild   R   ] sys-apps/miscfiles-1.4.2-r1
[ebuild   R   ] media-fonts/gnu-gs-fonts-std-8.11
[ebuild   R   ] media-libs/openjpeg-1.3-r2
[ebuild   R   ] sys-devel/autoconf-wrapper-8
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8
[ebuild   R   ] sys-fs/sysfsutils-2.1.0
[ebuild   R   ] sys-devel/automake-wrapper-4
[ebuild   R   ] sys-libs/timezone-data-2010l
[ebuild   R   ] dev-libs/libffi-3.0.9
[ebuild   R   ] sys-devel/patch-2.5.9
[ebuild   R   ] sys-apps/which-2.20
[ebuild   R   ] app-arch/xz-utils-4.999.9_beta
[ebuild   R   ] dev-util/gperf-3.0.4
[ebuild   R   ] dev-lang/swig-1.3.40-r1
[ebuild   R   ] app-portage/portage-utils-0.3.1
[ebuild   R   ] sys-devel/m4-1.4.14-r1
[ebuild   R   ] sys-kernel/linux-headers-2.6.30-r1
[ebuild   R   ] virtual/jpeg-0
[ebuild   R   ] media-libs/libpng-1.4.3
[ebuild   R   ] sys-apps/sandbox-2.3-r1
[ebuild   R   ] virtual/libffi-0
[ebuild   R   ] dev-libs/mpfr-2.4.2_p3
[ebuild   R   ] sys-apps/pciutils-3.1.4
[ebuild   R   ] app-arch/unzip-6.0-r1
[ebuild   R   ] media-libs/tiff-3.9.4
[ebuild   R   ] sys-apps/sysvinit-2.88-r1
[ebuild   R   ] media-libs/lcms-1.19
[ebuild   R   ] virtual/init-0
[ebuild   R   ] sys-apps/debianutils-3.2.3
[ebuild   R   ] app-shells/bash-completion-1.2
[ebuild   R   ] app-shells/gentoo-bashcomp-20090613
[ebuild   R   ] sys-auth/pambase-20100310
[ebuild   R   ] virtual/acl-0
[ebuild   R   ] virtual/perl-digest-base-1.16
[ebuild   R   ] virtual/opengl-7.0
[ebuild   R   ] media-libs/glitz-0.5.6
[ebuild   R   ] app-admin/python-updater-0.8
[ebuild   R   ] virtual/libusb-0
[ebuild   R   ] app-admin/eselect-vi-1.1.5
[ebuild   R   ] virtual/perl-Scalar-List-Utils-1.23
[ebuild   R   ] app-admin/eselect-opengl-1.1.1-r2
[ebuild   R   ] virtual/blas-1.0
[ebuild   R   ] x11-misc/xdg-utils-1.0.2_p20100618
[ebuild   R   ] app-admin/eselect-fontconfig-1.0
[ebuild   R   ] sys-devel/binutils-config-1.9-r4
[ebuild   R   ] app-i18n/man-pages-ru-0.98
[ebuild   R   ] sys-apps/man-pages-posix-2003a
[ebuild   R   ] app-admin/eselect-ctags-1.13
[ebuild   R   ] dev-util/ctags-5.7
[ebuild   R   ] virtual/perl-libnet-1.22
[ebuild   R   ] virtual/perl-MIME-Base64-3.08
[ebuild   R   ] virtual/perl-Digest-MD5-2.39
[ebuild   R   ] virtual/glu-7.0
[ebuild   R   ] virtual/ttf-fonts-1
[ebuild   R   ] virtual/lapack-3.1
[ebuild   R   ] virtual/cblas-1.0
[ebuild   R   ] app-text/docbook-xsl-stylesheets-1.75.2
[ebuild   R   ] app-text/build-docbook-catalog-1.4
[ebuild   R   ] virtual/perl-IO-Compress-2.024
[ebuild   R   ] virtual/perl-ExtUtils-CBuilder-0.27.03
[ebuild   R   ] virtual/perl-Module-Build-0.36.07
[ebuild   R   ] virtual/perl-Test-Harness-3.17
[ebuild   R   ] virtual/perl-Archive-Tar-1.54
[ebuild   R   ] virtual/perl-Package-Constants-0.02
[ebuild   R   ] virtual/perl-Compress-Raw-Bzip2-2.024
[ebuild   R   ] virtual/perl-Compress-Raw-Zlib-2.024
[ebuild   R   ] virtual/perl-IO-Zlib-1.10
[ebuild   R   ] virtual/perl-ExtUtils-ParseXS-2.22.05
[ebuild   R   ] sys-devel/autoconf-2.65-r1
[ebuild   R   ] sys-devel/automake-1.11.1
[ebuild   R   ] sys-devel/libtool-2.2.10
[ebuild   R   ] dev-lang/tcl-8.5.7
[ebuild   R   ] app-text/djvu-3.5.22-r1
[ebuild   R   ] dev-libs/libusb-0.1.12-r5
[ebuild   R   ] app-text/sgml-common-0.6.3-r5
[ebuild   R   ] sys-devel/binutils-2.20.1-r1
[ebuild   R   ] sys-libs/db-4.8.30
[ebuild   R   ] sys-libs/db-4.7.25_p4
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4
[ebuild   R   ] sys-devel/libperl-5.8.8-r2
[ebuild   R   ] dev-lang/perl-5.8.8-r8
[ebuild   R   ] dev-perl/Error-0.17.016
[ebuild   R   ] dev-perl/Digest-SHA1-2.12
[ebuild   R   ] perl-core/Scalar-List-Utils-1.23
[ebuild   R   ] perl-core/libnet-1.22
[ebuild   R   ] perl-core/digest-base-1.16
[ebuild   R   ] perl-core/MIME-Base64-3.08
[ebuild   R   ] perl-core/Digest-MD5-2.39
[ebuild   R   ] dev-perl/XML-Parser-2.36-r1
[ebuild   R   ] dev-perl/YAML-Tiny-1.41
[ebuild   R   ] perl-core/Test-Harness-3.17
[ebuild   R   ] perl-core/Archive-Tar-1.54
[ebuild   R   ] perl-core/Package-Constants-0.02
[ebuild   R   ] perl-core/IO-Compress-2.024
[ebuild   R   ] perl-core/Compress-Raw-Bzip2-2.024
[ebuild   R   ] perl-core/Compress-Raw-Zlib-2.024
[ebuild   R   ] perl-core/IO-Zlib-1.10
[ebuild   R   ] perl-core/ExtUtils-ParseXS-2.22.05
[ebuild   R   ] perl-core/ExtUtils-CBuilder-0.27.03
[ebuild   R   ] dev-perl/Digest-HMAC-1.01-r1
[ebuild   R   ] perl-core/Module-Build-0.36.07
[ebuild   R   ] dev-perl/Authen-SASL-2.12
[ebuild   R   ] dev-util/intltool-0.41.1
[ebuild   R   ] sys-devel/gettext-0.18.1.1-r1
[ebuild   R   ] sys-apps/sed-4.2
[ebuild   R   ] sys-apps/findutils-4.4.2
[ebuild   R   ] sys-devel/flex-2.5.35
[ebuild   R   ] sys-devel/bison-2.4.2
[ebuild   R   ] dev-libs/libgpg-error-1.7
[ebuild   R   ] sys-apps/attr-2.4.43
[ebuild   R   ] dev-libs/popt-1.16
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2
[ebuild   R   ] app-arch/gzip-1.4
[ebuild   R   ] sys-apps/kbd-1.15
[ebuild   R   ] sys-apps/net-tools-1.60_p20090728014017-r1
[ebuild   R   ] sys-apps/gawk-3.1.6
[ebuild   R   ] app-arch/tar-1.23-r2
[ebuild   R   ] sys-devel/make-3.81-r2
[ebuild   R   ] dev-perl/Locale-gettext-1.05-r1
[ebuild   R   ] sys-apps/acl-2.2.49
[ebuild   R   ] dev-libs/libgcrypt-1.4.6
[ebuild   R   ] net-misc/rsync-3.0.7
[ebuild   R   ] dev-libs/libtasn1-2.7
[ebuild   R   ] dev-util/pkgconfig-0.25-r2
[ebuild     U ] sys-apps/help2man-1.37.1 [1.36.4-r1]
[ebuild   R   ] x11-proto/xproto-7.0.17
[ebuild   R   ] net-libs/gnutls-2.10.1
[ebuild   R   ] x11-libs/pixman-0.18.2
[ebuild   R   ] sys-apps/usbutils-0.86-r1
[ebuild   R   ] dev-libs/libpcre-7.9-r1
[ebuild     U ] x11-misc/util-macros-1.10.1 [1.10.0]
[ebuild   R   ] media-fonts/font-util-1.1.1-r1
[ebuild   R   ] x11-proto/xextproto-7.1.1
[ebuild   R   ] x11-proto/inputproto-2.0
[ebuild   R   ] x11-libs/xtrans-1.2.5
[ebuild   R   ] x11-libs/libXau-1.0.5
[ebuild   R   ] x11-proto/renderproto-0.11
[ebuild   R   ] x11-proto/kbproto-1.0.4
[ebuild   R   ] x11-libs/libXdmcp-1.0.3
[ebuild   R   ] dev-libs/libpthread-stubs-0.1
[ebuild   R   ] x11-proto/damageproto-1.2.0
[ebuild   R   ] x11-proto/xf86vidmodeproto-2.3
[ebuild   R   ] x11-proto/compositeproto-0.4.1
[ebuild   R   ] x11-proto/randrproto-1.3.1
[ebuild   R   ] sys-apps/grep-2.5.4-r1
[ebuild   R   ] x11-proto/xf86bigfontproto-1.2.0
[ebuild   R   ] x11-proto/fontcacheproto-0.1.3
[ebuild   R   ] x11-proto/xf86miscproto-0.9.3
[ebuild   R   ] x11-misc/makedepend-1.0.2
[ebuild   R   ] x11-proto/xf86driproto-2.1.0
[ebuild   R   ] x11-proto/dri2proto-2.3
[ebuild   R   ] x11-proto/glproto-1.4.11
[ebuild   R   ] x11-libs/libfontenc-1.0.5
[ebuild   R   ] x11-libs/libICE-1.0.6
[ebuild   R   ] x11-proto/fixesproto-4.1.1
[ebuild   R   ] x11-libs/libdrm-2.4.20-r1
[ebuild   R   ] dev-libs/openssl-1.0.0a-r3
[ebuild   R   ] net-misc/curl-7.20.0-r2
[ebuild   R   ] dev-perl/Net-SSLeay-1.36
[ebuild   R   ] net-misc/iputils-20100418
[ebuild   R   ] net-misc/wget-1.12-r2
[ebuild   R   ] dev-perl/IO-Socket-SSL-1.33
[ebuild   R   ] dev-perl/Net-SMTP-SSL-1.01
[ebuild   R   ] sys-apps/man-1.6f-r4
[ebuild   R   ] sys-apps/man-pages-3.26
[ebuild   R   ] x11-libs/libX11-1.3.4
[ebuild   R   ] x11-libs/libXext-1.1.2
[ebuild   R   ] x11-libs/libXrender-0.9.6
[ebuild   R   ] media-libs/freetype-2.3.12
[ebuild   R   ] x11-libs/libXfixes-4.0.5
[ebuild   R   ] x11-apps/xprop-1.1.0
[ebuild   R   ] media-libs/fontconfig-2.8.0-r1
[ebuild   R   ] x11-libs/libXi-1.3.1
[ebuild   R   ] x11-libs/libXdamage-1.1.3
[ebuild   R   ] x11-libs/libXcursor-1.1.10
[ebuild   R   ] x11-libs/libXrandr-1.3.0
[ebuild   R   ] x11-libs/libXcomposite-0.4.2
[ebuild   R   ] x11-libs/libXxf86misc-1.0.2
[ebuild   R   ] x11-libs/libXfontcache-1.0.5
[ebuild   R   ] x11-libs/libXxf86vm-1.1.0
[ebuild   R   ] x11-apps/mkfontscale-1.0.7
[ebuild   R   ] x11-libs/libXft-2.1.14
[ebuild   R   ] media-libs/freeglut-2.6.0
[ebuild   R   ] x11-apps/mkfontdir-1.0.5
[ebuild   R   ] media-fonts/encodings-1.0.3-r1
[ebuild   R   ] media-libs/jasper-1.900.1-r3
[ebuild   R   ] media-fonts/dejavu-2.30
[ebuild   R   ] sys-libs/ncurses-5.7-r3
[ebuild   R   ] sys-apps/texinfo-4.13
[ebuild   R   ] sys-apps/coreutils-8.5
[ebuild   R   ] app-shells/bash-4.0_p37
[ebuild   R   ] sys-apps/util-linux-2.17.2
[ebuild   R   ] sys-libs/gpm-1.20.6
[ebuild   R   ] app-editors/nano-2.2.4
[ebuild   R   ] sys-apps/less-436
[ebuild   R   ] sys-process/psmisc-22.12
[ebuild   R   ] sys-process/procps-3.2.8
[ebuild   R   ] sys-libs/readline-6.1
[ebuild   R   ] x11-libs/libSM-1.1.1
[ebuild   R   ] app-misc/ca-certificates-20090709
[ebuild   R   ] app-admin/perl-cleaner-1.05
[ebuild   R   ] virtual/editor-0
[ebuild   R   ] virtual/pager-0
[ebuild   R   ] x11-libs/libXt-1.0.8
[ebuild   R   ] sys-devel/bc-1.06.95
[ebuild   R   ] x11-libs/libXmu-1.0.5
[ebuild   R   ] dev-lang/tk-8.5.7
[ebuild   R   ] sys-apps/dbus-1.2.24
[ebuild   R   ] x11-libs/libXpm-3.5.8
[ebuild   R   ] media-libs/mesa-7.8.2
[ebuild   R   ] x11-apps/xset-1.1.0
[ebuild   R   ] x11-apps/xauth-1.0.4
[ebuild   R   ] x11-libs/libXaw-1.0.7
[ebuild   R   ] sys-apps/groff-1.20.1-r1
[ebuild   R   ] app-admin/eselect-1.2.10
[ebuild   R   ] app-admin/eselect-lapack-0.1
[ebuild   R   ] app-admin/eselect-blas-0.1
[ebuild   R   ] app-admin/eselect-cblas-0.1
[ebuild   R   ] sci-libs/lapack-reference-3.1.1-r1
[ebuild   R   ] sci-libs/blas-reference-20070226
[ebuild   R   ] sci-libs/cblas-reference-20030223-r4
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.12
[ebuild   R   ] sys-fs/e2fsprogs-1.41.12
[ebuild   R   ] dev-util/cmake-2.8.1-r2
[ebuild   R   ] app-admin/eselect-python-20100321
[ebuild   R   ] dev-lang/python-2.6.5-r3
[ebuild   R   ] dev-libs/libxml2-2.7.7
[ebuild   R   ] dev-lang/python-3.1.2-r4
[ebuild   R   ] sys-apps/file-5.03
[ebuild   R   ] sys-apps/portage-2.1.8.3
[ebuild   R   ] dev-python/setuptools-0.6.14
[ebuild   R   ] dev-libs/libxslt-1.1.26
[ebuild   R   ] x11-proto/xcb-proto-1.6
[ebuild   R   ] app-text/docbook-xml-dtd-4.3-r1
[ebuild   R   ] x11-libs/libxcb-1.6
[ebuild   R   ] sys-libs/cracklib-2.8.16
[ebuild   R   ] dev-python/numpy-1.4.1
[ebuild   R   ] dev-util/gtk-doc-am-1.15
[ebuild   R   ] dev-libs/glib-2.24.1-r1
[ebuild   R   ] x11-libs/xcb-util-0.3.6
[ebuild   R   ] x11-libs/cairo-1.8.8-r1
[ebuild   R   ] dev-libs/atk-1.30.0
[ebuild   R   ] dev-python/pygobject-2.20.0
[ebuild   R   ] x11-misc/shared-mime-info-0.71
[ebuild   R   ] dev-util/desktop-file-utils-0.16
[ebuild   R   ] x11-libs/pango-1.28.1
[ebuild   R   ] dev-python/pycairo-1.8.8
[ebuild   R   ] sys-apps/baselayout-1.12.13
[ebuild   R   ] sys-apps/module-init-tools-3.5
[ebuild   R   ] app-editors/vim-core-7.2.442
[ebuild   R   ] app-editors/gvim-7.2.442
[ebuild   R   ] app-vim/gtk-syntax-20060423
[ebuild   R   ] app-vim/pam-syntax-20060424
[ebuild   R   ] app-vim/gentoo-syntax-20100215
[ebuild   R   ] x11-libs/gtk+-2.20.1-r1
[ebuild   R   ] gnome-base/libglade-2.6.4
[ebuild   R   ] app-text/poppler-0.14.1
[ebuild   R   ] x11-libs/gtksourceview-2.10.4
[ebuild   R   ] dev-python/pygtk-2.16.0-r1
[ebuild   R   ] dev-python/pygtksourceview-2.10.1
[ebuild   R   ] dev-vcs/git-1.7.2.2
[ebuild   R   ] sys-libs/pam-1.1.1-r2
[ebuild   R   ] sys-apps/shadow-4.1.4.2-r5
[ebuild   R   ] sys-apps/busybox-1.15.3
[ebuild   R   ] net-misc/openssh-5.5_p1-r2
[ebuild     UD] net-print/cups-1.3.11-r2 [1.4.4] USE="-avahi% -ppds% -zeroconf%" LINGUAS="en%* -et% -he%"
[ebuild   R   ] app-text/ghostscript-gpl-8.71-r1
[ebuild   R   ] sys-libs/glibc-2.11.2
[ebuild   R   ] sys-devel/gcc-4.4.3-r2
[ebuild   R   ] sys-fs/udev-151-r4


Estimated update time: 1hour, 47 minutes.
Back to top
View user's profile Send private message
krinn
Advocate
Advocate


Joined: 02 May 2003
Posts: 3919

PostPosted: Thu Oct 07, 2010 10:13 pm    Post subject: Reply with quote

Just my 2 cents:
You know guys how weak is your bench no ?

genlop keep track of what was build at what speed, so
- FEATURES="ccache" emerge -1 gcc && FEATURES="ccache" emerge -1 gcc FEATURES="ccache" emerge -1 gcc && FEATURES="ccache" emerge -1 gcc
This will lower your average gcc build time, let's say without ccache you need 2m to build gcc.
First run ccache take 2m30s, next run ccache cut down time to 1,30m: you end with
2,30+1,30+1.3+1.3=average build time for gcc will be 1m45s, without it, your gcc was taking 2m average time. A false "positive" result.
- same with FEATURES="distcc", will gave a false "positive" result,
- a previous cpu with your gentoo, emerge.log as record it's build time for gcc, now you are using a different cpu, but your previous emerge are still log and genlop have no way to know what gcc was build with the old cpu and what gcc was build with the new one. You can end-up with crazy values like 2 hours and 10 minutes, average 1 hour and 5 minutes to build gcc while your cpu will take 10 minutes only
So a false "negative" result
Code:
     Fri Jul 11 04:33:39 2008 >>> sys-devel/gcc-4.3.1-r1
       merge time: 56 minutes and 54 seconds.

Yes, i didn't remove emerge.log since a long time, in fact i use gentoo for more than that, but i think i enable the emerge.log at that time and never removed it since.
- --jobs>1 will also produce a bad value. A false "negative" result. Let's see it.
time emerge --jobs=3 -1 vlc genlop gcc
real 9m10.649s
time emerge --jobs=1 -1 vlc genlop gcc
real 12m43.426s
(i don't use ccache else second run could have been lower, but i did the test with jobs=1 on 2nd to let everything possible help that run instead of the first one with jobs=3, disk caching...)
But why it will produce a false "positive" result so ?
Because using --jobs>1 will max out your cpu usage, lowering total time to build the 3 program, but higher total time tooked to build one, look at my genlop result after the 2 run.
Code:
 * media-video/vlc

     Thu Oct  7 22:56:30 2010 >>> media-video/vlc-1.1.4.1
       merge time: 7 minutes and 45 seconds.

     Thu Oct  7 23:11:01 2010 >>> media-video/vlc-1.1.4.1
       merge time: 4 minutes and 14 seconds.

 * app-portage/genlop

     Thu Oct  7 22:48:52 2010 >>> app-portage/genlop-0.30.8-r2
       merge time: 7 seconds.

     Thu Oct  7 23:06:46 2010 >>> app-portage/genlop-0.30.8-r2
       merge time: 5 seconds.

 * sys-devel/gcc

     Thu Oct  7 22:57:52 2010 >>> sys-devel/gcc-4.4.3-r2
       merge time: 9 minutes and 7 seconds.

     Thu Oct  7 23:06:41 2010 >>> sys-devel/gcc-4.4.3-r2
       merge time: 8 minutes and 20 seconds.

If you compare first value is always higher than 2nd, but this was while using --jobs=3 and you finally end up with less time to build the 3 programs ?
Because 2nd value show all your cpu working on 1 program (and you might have cpu cores idle)
And 1st one show you cpu working 100% on 3 programs in parallel (and this time, as your cpu isn't 100% avaiable to build a program, it will need longer time to produce it). So instead of adding the 3 programs time, you should take the higest time took by the 3 programs to get the final result: here it was gcc with 9minutes 7seconds, close to the time result that was 9m 10s.
But genlop isn't aware of // tasking, and it will add the 3 time to produce it's estimated time, so worst than 12 minutes, genlop will base it on 9m10s+7m45s+7s = 16m45s

To sum up, even it's still far from perfect (program versions need different time to be build, disk/memory speed/size, tmpfs...), using genlop like this will produce a "better" result.
FEATURES="-distcc -ccache" emerge -1 --jobs=1 aprogram
and your last entry in "genlop -t aprogram" is the result of that last emerge.

and for the record, that computer who need 10 minutes to build its gcc, need "Estimated update time: 1 hour, 52 minutes." for the emerge -ep system | genlop -p test :)
Back to top
View user's profile Send private message
Ormaaj
Guru
Guru


Joined: 28 Jan 2008
Posts: 312

PostPosted: Sat Oct 09, 2010 8:00 am    Post subject: Reply with quote

How are you guys doing this? Doesn't work for me. I've done full system merges on this machine many times.

Code:
 # emerge -ep @system | genlop -p
These are the pretended packages: (this may take a while; wait...)


!!! Error: no pretended packages found.


Last edited by Ormaaj on Wed Oct 20, 2010 3:47 am; edited 1 time in total
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo Chat All times are GMT
Goto page Previous  1, 2, 3 ... 22, 23, 24, 25  Next
Page 23 of 25

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum