| View previous topic :: View next topic |
| Author |
Message |
vertigokernel
n00b
Joined: 24 Dec 2009
Posts: 6
|
 Posted: Thu Dec 24, 2009 4:46 pm Post subject: [Xorg] Probleme de lancement |
 |
|
Bonsoir.
Jai une erreur quand je lance startx.
Voici mon /var/log/Xorg.0.log
| Quote: |
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r6 i686
Current Operating System: Linux ilyastux 2.6.31-gentoo-r6 #4 SMP Thu Dec 24 16:55:00 CET 2009 i686
Build Date: 24 December 2009 04:02:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 18:05:31 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1ea0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:95c4:104d:9035 ATI Technologies Inc Mobilitiy Radeon HD 3400 Series rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.5, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.5.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
R700 : Radeon R700.
RV710 : Radeon HD4570, HD4350.
RV730 : Radeon HD4670, HD4650.
RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
RV790 : Radeon HD 4890.
M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
M96 : Mobility Radeon HD4600.
M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
M98 : Mobility Radeon HD4850, HD4870.
(II) RADEONHD: version 1.3.0, built from dist of git branch master, commit 8cbff7bf
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected EXA 2D acceleration.
(II) RADEONHD(0): Card not in database: 0x95C4:0x104D:0x9035; using generic modesetting.
If - and only if - your card does not work or does not work optimally
please contact radeonhd@opensuse.org to help rectify this.
Use the subject: 0x95C4:0x104D:0x9035: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an M82 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xd0020000 to 0xb7187000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x104d SubsystemID: 0x9035
IOBaseAddress: 0xd000
Filename: BR29579.001
BIOS Bootup Message:
SonyM761 M82 GDDR3_16Mx32 64bit 128MB 680e/800m
(II) RADEONHD(0): Analog TV Default Mode: 134996351
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEONHD(0): Default Engine Clock: 680000
(II) RADEONHD(0): Default Memory Clock: 800000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Found libdri 5.4.0.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEONHD(0): Found libdrm 1.3.0.
(II) RADEONHD(0): Found radeon drm 1.31.0.
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): FirmwareInfo Revision 0104
(II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0
(II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 0
(II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 0
(II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0
(II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz
(II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz
(II) RADEONHD(0): Default Engine Clock: 680000
(II) RADEONHD(0): Default Memory Clock: 800000
(II) RADEONHD(0): Current Engine Clock: 675000
(II) RADEONHD(0): Current Memory Clock: 792000
(II) RADEONHD(0): Current Chip Voltage: 0
(II) RADEONHD(0): Power Management: used engine clock / memory clock / core (VDDC) voltage (0: ignore)
(II) RADEONHD(0): Power Management: Raw Ranges
(II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.950 V
(II) RADEONHD(0): Maximum 0 kHz / 0 kHz / 1.200 V
(II) RADEONHD(0): Default 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): PowerPlayInfo Revision 0401
(II) RADEONHD(0): Power Management: Validated Ranges
(II) RADEONHD(0): Minimum 110000 kHz / 250000 kHz / 0.950 V
(II) RADEONHD(0): Maximum 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): Default 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): Power Management: Known Good Configurations
(II) RADEONHD(0): 1 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): 2 110000 kHz / 405000 kHz / 0.950 V
(II) RADEONHD(0): 3 300000 kHz / 405000 kHz / 0.950 V
(II) RADEONHD(0): 4 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): 5 110000 kHz / 405000 kHz / 0.950 V
(II) RADEONHD(0): 6 110000 kHz / 405000 kHz / 0.950 V
(II) RADEONHD(0): 7 300000 kHz / 405000 kHz / 0.950 V
(II) RADEONHD(0): 8 300000 kHz / 400000 kHz / 1.200 V
(II) RADEONHD(0): 9 550000 kHz / 700000 kHz / 1.200 V
(II) RADEONHD(0): 10 550000 kHz / 700000 kHz / 1.200 V
(II) RADEONHD(0): 11 300000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): 12 300000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): 13 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): 14 300000 kHz / 405000 kHz / 0.950 V
(II) RADEONHD(0): 15 300000 kHz / 405000 kHz / 0.950 V
(II) RADEONHD(0): Power Management: Final Levels
(II) RADEONHD(0): Off 110000 kHz / 250000 kHz / 0.950 V
(II) RADEONHD(0): Idle 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): Slow2D 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): Fast2D 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): Slow3D 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): Fast3D 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): Max3D 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): User 680000 kHz / 800000 kHz / 1.200 V
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, "LVDS LCD1", RHD_DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_KLDSKP_LVTMA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI_SINGLE, "HDMI_TYPE_A DFP1", RHD_DDC_2, RHD_HPD_0, { RHD_OUTPUT_UNIPHYA, RHD_OUTPUT_NONE } }
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1
(II) RADEONHD(0): LVDS FPDI: 0x1
(II) RADEONHD(0): LVDS Duallink: 0x0
(II) RADEONHD(0): LVDS Grey Level: 0x0
(II) RADEONHD(0): LVDS SEQ Dig onto DE: 30
(II) RADEONHD(0): LVDS SEQ DE to BL: 360
(II) RADEONHD(0): LVDS Off Delay: 500
(II) RADEONHD(0): LVDS 24Bit: 0x0
(II) RADEONHD(0): LVDS Spatial Dither : 0x1
(II) RADEONHD(0): LVDS Temporal Dither : 0x0
(II) RADEONHD(0): LVDS SEQ Dig onto DE: 30
(II) RADEONHD(0): LVDS SEQ DE to BL: 360
(II) RADEONHD(0): LVDS Off Delay: 500
(II) RADEONHD(0): LVDS Duallink: 0x0
(II) RADEONHD(0): LVDS 24Bit: 0x0
(II) RADEONHD(0): LVDS FPDI: 0x1
(II) RADEONHD(0): LVDS Temporal Dither : 0x0
(II) RADEONHD(0): LVDS Spatial Dither : 0x1
(II) RADEONHD(0): LVDS Grey Level: 0x0
(EE) RADEONHD(0): AtomBIOS returned 0 Grey Levels
(II) RADEONHD(0): Falling back to AtomBIOS controlled Backlight.
(--) RADEONHD(0): Attaching Output UNIPHY_KLDSKP_LVTMA to Connector PANEL
(--) RADEONHD(0): Attaching Output UNIPHY_A to Connector DVI-D 1
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A
(II) RADEONHD(0): RandR: Adding RRoutput PANEL for Output UNIPHY_KLDSKP_LVTMA
(II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output UNIPHY_A
(II) RADEONHD(0): Output VGA_1 using monitor section Monitor0
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): Output PANEL has no monitor section
(II) RADEONHD(0): Output DVI-D_1 has no monitor section
(EE) RADEONHD(0): rhdAtomLvdsDDC: unknown record type: d8
(II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEONHD(0): Found native mode: Modeline "1600x900" 88.54 1600 1614 1626 1630 900 902 904 906
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(II) RADEONHD(0): Output VGA_1 disconnected
(II) RADEONHD(0): Output PANEL connected
(II) RADEONHD(0): Output DVI-D_1 disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output PANEL using initial mode 1600x900
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 3840x1920 Framebuffer with 3840 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x01C20000)
(==) RADEONHD(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x01C28000 (size = 0x01998000)
(II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x035C0000 (size = 0x01C20000)
(II) RADEONHD(0): FB: Allocated DRI Depth Buffer at offset 0x051E0000 (size = 0x01C20000)
(II) RADEONHD(0): FB: Allocated GART table at offset 0x0FFF0000 (size = 0x00010000, end of FB)
(II) RADEONHD(0): FB: Allocated DRI Textures at offset 0x06E00000 (size = 0x09000000)
(II) RADEONHD(0): Using 16 MB GART aperture
(II) RADEONHD(0): Using 2 MB for the ring buffer
(II) RADEONHD(0): Using 2 MB for vertex/indirect buffers
(II) RADEONHD(0): Using 12 MB for GART textures
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEONHD(0): Mapped IO @ 0xd0020000 to 0xb7187000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xc0000000 to 0xa7156000 (size 0x10000000)
(II) RADEONHD(0): Attempting to enable power management
(II) RADEONHD(0): Current Engine Clock: 675000
(II) RADEONHD(0): Current Memory Clock: 792000
(II) RADEONHD(0): Current Chip Voltage: 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEONHD(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEONHD(0): [drm] framebuffer handle = 0xc0000000
(II) RADEONHD(0): [drm] added 1 reserved context for kernel
(II) RADEONHD(0): X context handle = 0x1
(II) RADEONHD(0): [drm] installed DRM signal handler
(II) RADEONHD(0): [pci] 16384 kB allocated with handle 0xf85d2000
(II) RADEONHD(0): [pci] ring handle = 0xf85d2000
(II) RADEONHD(0): [pci] Ring mapped at 0xa6f12000
(II) RADEONHD(0): [pci] Ring contents 0x00000000
(II) RADEONHD(0): [pci] ring read ptr handle = 0xf87d3000
(II) RADEONHD(0): [pci] Ring read ptr mapped at 0xa6f11000
(II) RADEONHD(0): [pci] Ring read ptr contents 0x00000000
(II) RADEONHD(0): [pci] vertex/indirect buffers handle = 0xf87d4000
(II) RADEONHD(0): [pci] Vertex/indirect buffers mapped at 0xa6d11000
(II) RADEONHD(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEONHD(0): [pci] GART texture map handle = 0xf89d4000
(II) RADEONHD(0): [pci] GART Texture map mapped at 0xa6151000
(II) RADEONHD(0): [drm] register handle = 0x2a004000
(II) RADEONHD(0): [dri] Visual configs initialized
(II) RADEONHD(0): Attempting to set Engine Clock to 680000
(II) RADEONHD(0): Current Engine Clock: 675000
(II) RADEONHD(0): Current Memory Clock: 792000
(II) RADEONHD(0): Current Chip Voltage: 0
(II) RADEONHD(0): [DRI] installation complete
(II) RADEONHD(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEONHD(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEONHD(0): [drm] dma control initialized, using IRQ 16
(II) RADEONHD(0): [drm] Initialized kernel GART heap manager, 12320768
(II) RADEONHD(0): Direct rendering enabled
(II) RADEONHD(0): Using DRM Command Processor (indirect) for acceleration.
(II) EXA(0): Offscreen pixmap area of 26836992 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Mapping DIG2 encoder to KLDSKP_LVTMA
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1600x900" 88.54 1600 1614 1626 1630 900 902 904 906
None
(II) RADEONHD(0): Query for Conditional Golden Setting: failed
(II) RADEONHD(0): LVTMATransmitterSet: Incoherent Mode not supported, switching to Coherent.
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): DPMS enabled
(II) RADEONHD(0): Xv: Textured Video initialised.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(EE) AIGLX error: dlopen of /usr/lib/dri/r600_dri.so failed (/usr/lib/dri/r600_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 423 x 238
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) RADEONHD(0): [drm] removed 1 reserved context for kernel
(II) RADEONHD(0): [drm] unmapping 8192 bytes of SAREA 0xf80a2000 at 0xa7113000
(II) RADEONHD(0): [drm] Closed DRM master.
(II) RADEONHD(0): Attempting to disable power management
(II) RADEONHD(0): Attempting to set Engine Clock to 675000
(II) RADEONHD(0): Current Engine Clock: 675000
(II) RADEONHD(0): Current Memory Clock: 792000
(II) RADEONHD(0): Current Chip Voltage: 0
|
Je precise que jai une ATI mobility radeon HD 3400 series. |
|
| Back to top |
|
 |
Kazuya
Apprentice
Joined: 09 Jul 2006
Posts: 256
|
| Posted: Thu Dec 24, 2009 5:18 pm Post subject: |
|
|
Hello,
Tout d'abord, bienvenue sur le Forum VertigoKernel  !
Si tu pouvais nous donner un peu plus de renseignements ça serait pas du luxe .
Tu as bien suivi la doc (Xorg -configure notamment) ? tu utilises HAL avec ton xorg ou pas ?...
Quel driver utilises-tu pour ton ati (drivers propriétaire, drivers libre...) ainsi que leurs versions.
Et si tu pouvais nous donner ton xorg.conf également  .
Voici le fichier en racourci (grep EE et grep WW):
| /var/log/Xorg.0.log wrote: |
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(WW) RADEONHD(0): No monitor size info, assuming 96dpi.
(EE) RADEONHD(0): AtomBIOS returned 0 Grey Levels
(EE) RADEONHD(0): rhdAtomLvdsDDC: unknown record type: d8
(EE) AIGLX error: dlopen of /usr/lib/dri/r600_dri.so failed (/usr/lib/dri/r600_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
|
EDIT: oups, j'avais pas vue la version de xorg dans le fichier... besoin de dormir moi...
_________________
Hacker vaillant, rien d'impossible !!!
"Quand une vache boit de l'eau, cette eau devient du lait. Quand un serpent boit de l'eau, cette eau devient du poison." |
|
| Back to top |
|
|
vertigokernel
n00b
Joined: 24 Dec 2009
Posts: 6
|
| Posted: Thu Dec 24, 2009 7:12 pm Post subject: |
|
|
Merci pour ton accueil Kazuya. Comme je débute je ne savais pas trop ce qu'il fallait donner comme informations.
Alors oui
J'ai lancé X -configure
Ca m'a crée ce xorg.conf
| Quote: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "glx"
Load "record"
Load "extmod"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # <i>
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Mobilitiy Radeon HD 3400 Series"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection)
EndSection |
Sinon pour les drivers, j'ai activé en module dans le noyau gentoo (ie Linux Kernel v2.6.31-gentoo-r6 ) dans device drivers---> graphics support ---> Direct rendering Manager (XFree86 4.1.0 and Higher DRI support support) --> ATI radeon
Je l'ai bien mis en autoload ce module.
j'ai emerge xorg-server avec dans mon /etc/make.conf VIDEO_CARDS="radeon".
Auparavent j'avais testé avec fglrx (j'avais installé ati-drivers) :
j'avais comme message d'erreur:
(WW) Falling back to old probe method for fglrx
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
Après quelques essais non concluants je l'avais viré pour passer aux drivers libres. |
|
| Back to top |
|
|
vertigokernel
n00b
Joined: 24 Dec 2009
Posts: 6
|
| Posted: Thu Dec 24, 2009 7:15 pm Post subject: |
|
|
| Je ne crois pas que j'utilise hal (je ne sais même pas ce que c'est) , j'ai juste emerge xorg-server comme indiqué dans le manuel. |
|
| Back to top |
|
|
Kazuya
Apprentice
Joined: 09 Jul 2006
Posts: 256
|
| Posted: Thu Dec 24, 2009 8:09 pm Post subject: |
|
|
Alors,
Tout d'abord, je vais avoir un peu de mal à t'aider car j'utilise du nvidia.. cela fait un très long moment que je n'ai pas joué avec de l'ati...
La première question c'est: Quel driver veux-tu finalement utiliser ? le propriétaire ou le libre ? (tu pourras rechanger quand tu voudras, c'est pas définitif lol)
Ensuite, pardonne mon coté "bourrin" à parler de Hal et compagnie alors que tu es nouveau sous gentoo (c'est pas spécifique gentoo, mais bon plutôt transparent du coté des autres distributions...)
Hal pour Hardware Abstraction Layer, où couche d'abstraction matérielle en français. C'est grosso-modo utile par exemple sous kde, quand tu branches un périphérique amovible --> t'as une petite fenêtre pour te demander quoi faire, et bien ce procédé utilise HAL pour fonctionner.
Hal et maintenant gèré dans xorg (pour combien de temps ?), donc il y a deux possibilités:
- soit la vieille méthode, on compile xorg sans le USE "hal" et donc on configure les périphériques (clavier, souris) dans le fichier xorg.conf,
- soit la nouvelle méthode, on compile xorg avec le USE "hal" et donc il n'y a plus de trace de configuration des périphériques dans le xorg.conf, celui-ci devient donc minimaliste, par contre on retrouve cette configuration dans les fichiers de Hal (et là je te laisserais faire une petite recherche sur le forum, ça a fait un peu de vague à ce sujet...ou bien si l'anglais ne te gêne pas, lis cette doc car la traduction française n'est pas (encore) à jour...)
Personnellement chacun fait ce qu'il veut, moi j'utilise xorg avec HAL.
Donc pour en revenir à ton xorg.conf, as-tu suivi les docs en ligne ? celle-ci
EDIT: pareil, si l'anglais ne te gêne toujours pas: doc pour driver ati
Et pour tes message d'erreur avec le drivers propriétaire,c 'est expliqué dans cette doc que tu peux passer outre ces messages ^^.
Sinon les drivers libres ont pas mal évolués, quelle version de mesa utilises-tu ? la version stable (7.5.2) ou testing (7.7) je te conseille de passer mesa à la version testing.
(echo "media-libs/mesa ~x86" >> /etc/portage/package.keywords, remplacer x86 par amd64 si tu es en 64bits ^^)
Et pareil, toujours pour le drivers libre radeon, dans ton kernel c'est bien configuré comme ça:
| Quote: |
Device Drivers --->
Generic Driver Options --->
<*> Userspace firmware loading support
[*] Include in-kernel firmware blobs in kernel binary
Graphics support --->
<*> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
<*> ATI Radeon
[*] Staging drivers --->
[ ] Exclude Staging drivers from being built
[*] Enable modesetting on radeon by default
|
Tiens regarde cette documentation sur le wiki gentoo /!\ Mais attention à ne pas la suivre à la lettre notamment pour les drivers expérimentaux (je parle de mesa-999 et libdrm 999 disponible dans l'overlay) tu l'adaptes à la version de mesa disponible dans portage actuellement.
_________________
Hacker vaillant, rien d'impossible !!!
"Quand une vache boit de l'eau, cette eau devient du lait. Quand un serpent boit de l'eau, cette eau devient du poison." |
|
| Back to top |
|
|
vertigokernel
n00b
Joined: 24 Dec 2009
Posts: 6
|
| Posted: Wed Dec 30, 2009 2:57 pm Post subject: |
|
|
| Merci Beaucoup Kazuya. Finalement le problème est résolu. J'ai désinstallé ati-drivers, j'ai supprimé fglrx.ko (il était lancé automatiquement en module a chaque démarrage Oo). Bref je pense que c'est le driver propriétaire qui a foutu le bordel. |
|
| Back to top |
|
|
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8708
Location: ~Brussels - Belgique
|
| Posted: Wed Dec 30, 2009 3:31 pm Post subject: |
|
|
Yep, c'est pas une bonne idée de lancer les modules "framebuffer" du kernel avec les drivers propriétaires. Désactive-les dans la configuration du noyau pour la prochaine fois.
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
Kazuya
Apprentice
Joined: 09 Jul 2006
Posts: 256
|
| Posted: Wed Dec 30, 2009 3:33 pm Post subject: |
|
|
Hello,
A ben c'est cool si ce n'était que ça comme problème  .
Par contre, si tu pouvais mettre un petit "(resolu)" dans ton titre du sujet (en éditant ton premier poste) ça serait super merci.
Et bonne continuation sous gentoo
_________________
Hacker vaillant, rien d'impossible !!!
"Quand une vache boit de l'eau, cette eau devient du lait. Quand un serpent boit de l'eau, cette eau devient du poison." |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
