View previous topic :: View next topic |
Author |
Message |
Panko n00b
Joined: 04 Aug 2009 Posts: 9
|
Posted: Mon Aug 10, 2009 2:05 am Post subject: |
|
|
I'm kind of curious now: are there many differences between gkrellm and conky? They seem almost exactly the same. |
|
Back to top |
|
|
Earthwings Bodhisattva
Joined: 14 Apr 2003 Posts: 7753 Location: Germany
|
Posted: Mon Aug 10, 2009 5:45 am Post subject: |
|
|
Merged the last three posts from Gentoo Chat. _________________ KDE |
|
Back to top |
|
|
Ormaaj Guru
Joined: 28 Jan 2008 Posts: 319
|
Posted: Mon Aug 10, 2009 7:07 am Post subject: |
|
|
Hm this seems like more of a support thread. |
|
Back to top |
|
|
Despot Despondency Apprentice
Joined: 14 Mar 2009 Posts: 176
|
Posted: Wed Aug 19, 2009 8:42 pm Post subject: Help with my conky file |
|
|
Hi, I'm trying to configure my conky to how I want it but need some help.
Here's my .conkyrc file (I've stolen it from somewhere else)
Code: |
# maintain spacing between certain elements
use_spacer right
# set to yes if you want tormo to be forked in the background
background yes
use_xft yes
# Xft font when Xft is enabled
xftfont Vera-7
#xftfont Andale Mono-9
#xftfont Clean-8
#xftfont cubicfive10:pixelsize=8
#xftfont squaredance10:pixelsize=14
#xftfont swf!t_v02:pixelsize=10
# Text alpha when using Xft
xftalpha 1
mail_spool $MAIL
# Update interval in seconds
update_interval 5.0
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 260 5
maximum_width 260
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no # amplifies text
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 3
# border margins
border_margin 9
# border width
border_width 10
# Default colors and also border colors, grey90 == #e5e5e5
default_color grey90
default_shade_color black
default_outline_color DarkGrey
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
gap_x 24
gap_y 24
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# stuff after 'TEXT' will be formatted on screen
TEXT
${color #ffffff}PROCESSING$color
${color #98c2c7}CPU:$color $cpu%
${color #98c2c7}$cpubar
${color #98c2c7}${cpugraph 78af78 a3a3a3}
${color #98c2c7}NAME PID CPU% MEM%
${color #e5e5e5}${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color #c4c4c4}${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color #a3a3a3}${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color #828282}${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color #ffcb48}DATA$color
${color #98c2c7}RAM:$color $memperc% ${color #828282${membar 6}${color #828282}
${color #98c2c7}SWAP:$color $swapperc% ${color #828282${swapbar 6}${color #828282}
${color #ffcb48}FILESYSTEM
${color #98c2c7}root /:$color ${fs_free_perc /}% $fs_free ${color #98c2c7}${fs_bar 6 /}$color
|
First question is how do I get the conky to be transparent so that it looks like it is part of the desktop?
Thanks in advance. |
|
Back to top |
|
|
desultory Bodhisattva
Joined: 04 Nov 2005 Posts: 9410
|
Posted: Thu Aug 20, 2009 1:03 am Post subject: |
|
|
Merged the preceding post. |
|
Back to top |
|
|
adramalech707 Apprentice
Joined: 06 Oct 2009 Posts: 236 Location: California, USA
|
Posted: Wed Oct 21, 2009 12:14 am Post subject: problem with conky |
|
|
okay so conky doesn't like to load up wireless_essid wlan0 it says that wireless_essid is an unknown variable....is there a way to fix this....because my conky will say this every time and when i look at essid it has nothing and also wireless_link_qual_per variable is wrong.... the ip variable for conky works....and other thing i am having problems with is my battery time left in conky aswell as temperature of my hdd....
i am using a hp-dv7-1245dx
here is what my conky.conf file looks like
Code: |
# set to yes if you want Conky to be forked in the background
background no
cpu_avg_samples 2
net_avg_samples 2
out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=8
own_window_transparent no
#own_window_colour hotpink
# Text alpha when using Xft
xftalpha 0.8
# Update interval in seconds
update_interval 1
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar
own_window_type override
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 260 5
maximum_width 260
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders no
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 15
gap_y 70
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer right
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
TEXT
${color #0077ff}$sysname $kernel $machine
${color #0077ff}Uptime:${color lightgrey} $uptime ${color #0077ff}
${color #0077ff}Cpu Usage:
${color #0077ff}Core1:
${color lightgrey}${cpu cpu1}% ${color #F90000} ${color #F90000}${cpubar cpu1}
${color #0077ff}Core2:
${color lightgrey}${cpu cpu2}% ${color #F90000} ${cpubar cpu2}
${color #0077ff}Processes:${color lightgrey} $processes ${color #0077ff}Run:${color lightgrey} $running_processes ${color #0077ff}CPU:${color lightgrey} ${acpitemp}C${color lightgrey} ${color #0077ff} {color #0077ff}Freq: ${color lightgrey}{freq}Mhz
${color #0077ff}RAM:${color lightgrey} $mem/$memmax - $memperc% ${alignr}${color #F90000}${membar 5,110}
${color #0077ff}HD IO: ${color lightgrey}${diskio} ${alignr}${color #0077ff}Temperature: ${color lightgrey}C
${color #0077ff}${diskiograph 000000 0077ff}
${color #0077ff}Battery: ${color lightgrey} ${battery_percent}% ${color #0077ff}Time left:${color lightgrey}${battery_time}
${color #0077ff}CPU Usage PID CPU% MEM%
${color lightgrey} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color #0077ff} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color #0077ff} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color #0077ff}Mem Usage
${color lightgrey} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color #0077ff} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color #0077ff} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${font sans-serif:normal:size=8}RAM $alignc $mem / $memmax $alignr ${color lightgrey}$memperc%
${color #F90000}$membar
${color #0077ff}${font sans-serif:bold:size=8}NETWORK ${hr 2}
${font sans-serif:normal:size=8}IP address: $alignr ${color lightgrey}${addr wlan0}
ESSID: $alignr ${wireless_essid wlan0}
${color #0077ff}Connection quality: $alignr ${color lightgrey}${wireless_link_qual_perc wlan0}%
${color #F90000}${downspeedgraph wlan0}
${color #0077ff}DLS:${color lightgrey}${downspeed wlan0} kb/s $alignr total: ${color lightgrey}${totaldown wlan0}
${color #F90000}${upspeedgraph wlan0}
|
|
|
Back to top |
|
|
desultory Bodhisattva
Joined: 04 Nov 2005 Posts: 9410
|
Posted: Wed Oct 21, 2009 6:34 am Post subject: |
|
|
Merged the preceding post. |
|
Back to top |
|
|
adramalech707 Apprentice
Joined: 06 Oct 2009 Posts: 236 Location: California, USA
|
Posted: Thu Oct 22, 2009 10:19 pm Post subject: |
|
|
okay i am having an issue with totally uninstalling dang conky....i wanted to totally delete it because it isn't enabling wifi variables....so what should i do???
i did locate conky and this is what i got:
Code: |
/etc/conky
/etc/conky/conky.conf
/usr/etc/conky
/usr/etc/conky/conky_no_x11.conf
/usr/etc/conky/conky.conf
/usr/lib64/conky
/usr/portage/distfiles/conky-1.6.1.tar.bz2
/usr/portage/metadata/cache/app-admin/conky-1.7.1.1-r2
/usr/portage/metadata/cache/app-admin/conky-1.6.1
/usr/portage/metadata/cache/app-admin/conky-1.7.2-r2
/usr/portage/app-admin/conky
/usr/portage/app-admin/conky/Manifest
/usr/portage/app-admin/conky/conky-1.7.1.1-r2.ebuild
/usr/portage/app-admin/conky/files
/usr/portage/app-admin/conky/files/conky_no_x11.conf
/usr/portage/app-admin/conky/files/conky-1.6.1-stdio.patch
/usr/portage/app-admin/conky/files/conky-1.7.1.1-comment.patch
/usr/portage/app-admin/conky/metadata.xml
/usr/portage/app-admin/conky/conky-1.7.2-r2.ebuild
/usr/portage/app-admin/conky/ChangeLog
/usr/portage/app-admin/conky/conky-1.6.1.ebuild
/usr/local/etc/conky
/usr/local/etc/conky/conky_no_x11.conf
/usr/local/etc/conky/conky.conf
/usr/local/lib64/conky
/usr/local/bin/conky
/usr/local/share/man/man1/conky.1
/usr/share/man/man1/conky.1
/var/cache/man/cat1/conky.1.bz2
|
also i did :
emerge --update --deep --newuse world
emerge --depclean
revdep-rebuild
and it didn't get rid of my issue... |
|
Back to top |
|
|
Anon-E-moose Watchman
Joined: 23 May 2008 Posts: 6098 Location: Dallas area
|
Posted: Thu Oct 22, 2009 10:20 pm Post subject: |
|
|
"emerge -C conky"
then
"emerge --depclean"
to delete anything that conky pulled in just for itself _________________ PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
Back to top |
|
|
adramalech707 Apprentice
Joined: 06 Oct 2009 Posts: 236 Location: California, USA
|
Posted: Fri Oct 23, 2009 12:48 am Post subject: |
|
|
the problem i have is that i did that then i downloaded source and installed in /usr/src and then tried to uninstall that and that is what i am having issues with now...should i just do this:
locate conky
then delete all the directories it brings back then clean install?
i was trying to get conky to build with wifi variables enabled and doing emerge conky i guess doesn't do that.... |
|
Back to top |
|
|
adramalech707 Apprentice
Joined: 06 Oct 2009 Posts: 236 Location: California, USA
|
Posted: Fri Oct 23, 2009 1:05 am Post subject: |
|
|
i did remove all the locate conky files....now i need to know how to emerge conky with --enable-wlan flag |
|
Back to top |
|
|
desultory Bodhisattva
Joined: 04 Nov 2005 Posts: 9410
|
Posted: Fri Oct 23, 2009 2:00 am Post subject: |
|
|
The wifi USE flag controls that option. |
|
Back to top |
|
|
adramalech707 Apprentice
Joined: 06 Oct 2009 Posts: 236 Location: California, USA
|
Posted: Fri Oct 30, 2009 9:27 pm Post subject: |
|
|
okay soooo i fixed the wifi variables....but i still cannot find a good thing to show my battery time left i have tried the ones in conky variables but none of them work...neither does trying to find fan speed for cpu...
i was wondering if anybody has ati stuff working with conky...i use a hd3200 in my laptop.... |
|
Back to top |
|
|
Art Vandalay Guru
Joined: 16 Sep 2003 Posts: 335 Location: Melbourne - VIC
|
Posted: Sun Nov 01, 2009 4:57 am Post subject: |
|
|
i have a question for anyone using conky with kde 4.3x with transparency enabled.
i have it working via the use of feh....ie i use feh to draw the background to match that of the kde desktop then i start conky after a 50 second or so delay.
the transparency works, however, i get a shadowy outline of conky....does anyone know how to get rid of this effect?
also if i move conky around the desktop, shouldnt it be able to update its background accoriding to its new coordinates? i am sure this used to happen in the past but it no longer happens.
i start conky as follows:
Quote: | #! /bin/bash
feh --bg-scale `grep 'wallpaper=' ~/.kde4/share/config/plasma-desktop-appletsrc | tail --bytes=+11`
sleep 50
conky -& |
and my conkyrc file is:
Quote: | ##############################################
# My Conky configy
#
#
#maximum_width 100
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# fiddle with window
use_spacer right
use_xft no
# Update interval in seconds
update_interval 3.0
# Minimum size of text area
# minimum_size 250 5
# Draw shades?
draw_shades no
# Text stuff
draw_outline no # amplifies text if yes
draw_borders no
uppercase no # set to yes if you want all text to be in uppercase
# Stippled borders?
stippled_borders 3
# border margins
border_inner_margin 9
# border width
border_width 10
# Default colors and also border colors, grey90 == #e5e5e5
default_color grey # black
own_window_colour black # brown
own_window_transparent yes
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
gap_x 20
gap_y 20
# stuff after 'TEXT' will be formatted on screen
TEXT
${color orange}SYSTEM ${hr 2}$color
$nodename $sysname $kernel on $machine
${color orange}CPU ${hr 2}$color
${freq}MHz Load: ${loadavg}
$cpubar
${cpugraph 000000 ffffff}
NAME PID CPU% MEM%
${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color orange}MEMORY / DISK ${hr 2}$color
RAM: $memperc% ${membar 6}$color
Root: ${fs_free_perc /}% ${fs_bar 6 /}$color
Store: ${fs_free_perc /mnt/store}% ${fs_bar 6 /mnt/store}$color
${color orange}NETWORK (${addr eth0}) ${hr 2}$color
Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s
${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0
25,140 000000 00ff00}$color
Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0}
${color orange}${hr 2}$color
CPU ${exec cat /sys/class/hwmon/hwmon0/device/temp2_input | sed "s/\(..\)\(.\)../\1\.\2/"} C
M/B ${exec cat /sys/class/hwmon/hwmon0/device/temp1_input | sed "s/\(..\)\(.\)../\1\.\2/"} C
Hard Drive Temp: ${execi 300 nc localhost 7634 | cut -c24-25 ;}C (store)
Hard Drive Temp: ${execi 300 nc localhost 7634 | cut -c61-62 ;}C (OS)
|
_________________ I might not have morals...but at least I have standards |
|
Back to top |
|
|
Art Vandalay Guru
Joined: 16 Sep 2003 Posts: 335 Location: Melbourne - VIC
|
Posted: Sun Nov 01, 2009 8:44 am Post subject: |
|
|
Art Vandalay wrote: |
the transparency works, however, i get a shadowy outline of conky....does anyone know how to get rid of this effect?
|
just a follow up to this, i've solved the shadow effect problem. i discovered this only happens only when compositing is turned on in kde.
going to "system settings" -> Desktop -> "Desktop Effects" -> and unchecking the "Shadows" checkbox below compositing fixes the problem _________________ I might not have morals...but at least I have standards |
|
Back to top |
|
|
h2sammo Veteran
Joined: 11 Mar 2009 Posts: 1025 Location: Michigan
|
Posted: Mon Jan 25, 2010 10:19 pm Post subject: Help with CONKY displaying temps |
|
|
i would like to find out what temps it can display and how it does it, i am not sure if i should enable some things in kernel. i have tried using the temperature_unit command in ~/.conkyrc but it does not bring up any input. it is on a DELL Dimension 2350.
Code: |
TEXT
${scroll 16 $nodename - $sysname $kernel on $machine | }
$hr
${color grey}Uptime:$color $uptime
${color grey}Frequency (in GHz):$color $freq_g
${color grey}RAM Usage:$color $mem/$memmax - $memperc% ${membar 4}
${color grey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar 4}
${color grey}CPU Usage:$color $cpu% ${cpubar 4}
${color grey}Processes:$color $processes ${color grey}Running:$color
${color red}Temp:$color $temperature_unit
$running_processes
$hr
${color grey}File systems:
/ $color${fs_free /}/${fs_size /} ${fs_bar 6 /}
${color grey}Networking:
Up:$color ${upspeed eth0} k/s${color grey} - Down:$color ${downspeed eth0} k/s
$hr
${color grey}Name PID CPU% MEM%
${color lightgrey} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
|
|
|
Back to top |
|
|
Sadako Advocate
Joined: 05 Aug 2004 Posts: 3792 Location: sleeping in the bathtub
|
Posted: Mon Jan 25, 2010 11:14 pm Post subject: |
|
|
"temperature_unit" is only used to set the readings to celsius or fahrenheit, it doesn't output anything itself.
What's the output of `ls /sys/class/hwmon/*`? _________________ "You have to invite me in" |
|
Back to top |
|
|
desultory Bodhisattva
Joined: 04 Nov 2005 Posts: 9410
|
Posted: Tue Jan 26, 2010 1:27 am Post subject: |
|
|
Merged the two preceding posts. |
|
Back to top |
|
|
xiber Apprentice
Joined: 28 Oct 2003 Posts: 245 Location: Fremont, CA
|
Posted: Tue Jan 26, 2010 6:25 am Post subject: |
|
|
I like gkrellm better then conky, but started to use conky recently (in addition to gkrellm) to just show time in different timezones. Using e16 1.0.1 with 3 virtual desktops. Conky works fine on all desktops, but If I'm using desktop-1 or desktop-2, conky will shutdown after about 5 minutes. If I use only desktop-0 (the real root window), conky runs forever.
I wondering if conky has a problem with how e16 handles virtual desktops. Any ideas? _________________ Athlon XP-M 2600 @ 2.3 GHz OC | Abit NF7-S r2.0 | 2x512MB PC3200 | 6600GT OC | Audigy 2 | Gentoo | 2005
Athlon 64 X2 4600 @ 2.4 GHz | Asus M2N-SLI DLX | 4x1GB PC6400 | 7600GT KO | 7HD @ 3.1TB | OpenSolaris SXCE | 2007 |
|
Back to top |
|
|
h2sammo Veteran
Joined: 11 Mar 2009 Posts: 1025 Location: Michigan
|
Posted: Tue Jan 26, 2010 2:07 pm Post subject: |
|
|
Hopeless wrote: | "temperature_unit" is only used to set the readings to celsius or fahrenheit, it doesn't output anything itself.
What's the output of `ls /sys/class/hwmon/*`? |
Code: |
bobby@localhost ~ $ ls /sys/class/hwmon/*
ls: cannot access /sys/class/hwmon/*: No such file or directory
bobby@localhost ~ $ ls /sys/class/hwmon/
bobby@localhost ~ $ ls /sys/
block bus class dev devices firmware fs kernel module power
bobby@localhost ~ $ ls /sys/class
bdi hidraw misc rtc thermal video_output
block hwmon msr scsi_device tty vtconsole
cpuid i2c-adapter net scsi_disk usb_endpoint
display i2c-dev pci_bus scsi_generic usb_host
dmi input pktcdvd scsi_host usbmon
firmware mem power_supply sound vc
bobby@localhost ~ $ ls /sys/class/hwmon
bobby@localhost ~ $
|
|
|
Back to top |
|
|
xiber Apprentice
Joined: 28 Oct 2003 Posts: 245 Location: Fremont, CA
|
Posted: Wed Jan 27, 2010 2:44 am Post subject: |
|
|
Woo Hoo!!! Conky 1.8.0_rc2, REAL TRANSPARENCY!!! Hopefully this release also solves my other issue. _________________ Athlon XP-M 2600 @ 2.3 GHz OC | Abit NF7-S r2.0 | 2x512MB PC3200 | 6600GT OC | Audigy 2 | Gentoo | 2005
Athlon 64 X2 4600 @ 2.4 GHz | Asus M2N-SLI DLX | 4x1GB PC6400 | 7600GT KO | 7HD @ 3.1TB | OpenSolaris SXCE | 2007 |
|
Back to top |
|
|
h2sammo Veteran
Joined: 11 Mar 2009 Posts: 1025 Location: Michigan
|
Posted: Fri Jan 29, 2010 10:12 pm Post subject: |
|
|
ok i followed tyhe instructions here : http://en.gentoo-wiki.com/wiki/Lm_sensors to install lm_sensors.
after i ran sensors-detect, i found NO sensors:
Code: | ...Sorry, no sensors were detected.
Either your sensors are not supported, or they are connected to an
I2C or SMBus adapter that is not supported.... |
this is on an appletv running gentoo of course. is there a way to check if my hardware actually has any sensors...? i did this hoping for temperature sensors. |
|
Back to top |
|
|
patrikas Tux's lil' helper
Joined: 28 Nov 2009 Posts: 106
|
Posted: Wed Mar 10, 2010 2:59 pm Post subject: console conky |
|
|
I just emerged conky with USE="ipv6 truetype vim-syntax wifi -X -audacious -debug -hddtemp -mpd -nano-syntax -nvidia -rss -smapi". I am intending to run console-only conky here on my server. First run with default configuration gives:
Code: |
patrikas@serveris ~ $ conky
Conky: /etc/conky/conky.conf: 27: no such configuration: 'alignment'
Conky: /etc/conky/conky.conf: 29: no such configuration: 'border_width'
Conky: /etc/conky/conky.conf: 31: no such configuration: 'default_color'
Conky: /etc/conky/conky.conf: 32: no such configuration: 'default_outline_color'
Conky: /etc/conky/conky.conf: 33: no such configuration: 'default_shade_color'
Conky: /etc/conky/conky.conf: 34: no such configuration: 'draw_borders'
Conky: /etc/conky/conky.conf: 35: no such configuration: 'draw_graph_borders'
Conky: /etc/conky/conky.conf: 36: no such configuration: 'draw_outline'
Conky: /etc/conky/conky.conf: 37: no such configuration: 'draw_shades'
Conky: /etc/conky/conky.conf: 38: no such configuration: 'font'
Conky: /etc/conky/conky.conf: 39: no such configuration: 'gap_x'
Conky: /etc/conky/conky.conf: 40: no such configuration: 'gap_y'
Conky: /etc/conky/conky.conf: 41: no such configuration: 'minimum_size'
Conky: /etc/conky/conky.conf: 45: no such configuration: 'own_window'
Conky: /etc/conky/conky.conf: 46: no such configuration: 'own_window_class'
Conky: /etc/conky/conky.conf: 47: no such configuration: 'own_window_type'
Conky: /etc/conky/conky.conf: 48: no such configuration: 'stippled_borders'
Conky: use_spacer should have an argument of left, right, or none. 'no' seems to be some form of 'false', so defaulting to none.
Conky: /etc/conky/conky.conf: 52: no such configuration: 'show_graph_scale'
Conky: /etc/conky/conky.conf: 53: no such configuration: 'show_graph_range'
|
And I see many weird characters (perhaps ANSI escape sequences to set a color of the text ?) in the beginning of almost each line. I removed ${color}, ${*bar} tags and they disappeared, however I would like to achieve similar view of 'top' which updates display. Is it possible to do that ? Now it keeps writing each update to the console separately. If it's not then are there any other (maybe ncurses based) monitors with similar functionality ? |
|
Back to top |
|
|
d2_racing Bodhisattva
Joined: 25 Apr 2005 Posts: 13047 Location: Ste-Foy,Canada
|
Posted: Wed Mar 10, 2010 3:41 pm Post subject: |
|
|
Hi, can you post your .conkyrc plz ? |
|
Back to top |
|
|
patrikas Tux's lil' helper
Joined: 28 Nov 2009 Posts: 106
|
Posted: Wed Mar 10, 2010 8:11 pm Post subject: |
|
|
Hi, Thanks for reply. I got following errors with default configuration as written in my first message, this configuration is:
Code: |
# Conky, a system monitor, based on torsmo
#
# Any original torsmo code is licensed under the BSD license
#
# All code written since the fork of torsmo is licensed under the GPL
#
# Please see COPYING for details
#
# Copyright (c) 2004, Hannu Saransaari and Lauri Hakkarainen
# Copyright (c) 2005-2007 Brenden Matthews, Philip Kovacs, et. al. (see AUTHORS)
# All rights reserved.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# $Id: conky.conf 1193 2008-06-21 20:37:58Z ngarofil $
alignment bottom_left
background no
border_width 1
cpu_avg_samples 2
default_color white
default_outline_color white
default_shade_color white
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
font 6x10
gap_x 5
gap_y 60
minimum_size 5 5
net_avg_samples 2
no_buffers yes
out_to_console no
own_window yes
own_window_class Conky
own_window_type normal
stippled_borders 0
update_interval 3.0
uppercase no
use_spacer no
show_graph_scale no
show_graph_range no
TEXT
${scroll 16 $nodename - $sysname $kernel on $machine | }
$hr
${color grey}Uptime:$color $uptime
${color grey}Frequency (in MHz):$color $freq
${color grey}Frequency (in GHz):$color $freq_g
${color grey}RAM Usage:$color $mem/$memmax - $memperc% ${membar 4}
${color grey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar 4}
${color grey}CPU Usage:$color $cpu% ${cpubar 4}
${color grey}Processes:$color $processes ${color grey}Running:$color $running_processes
$hr
${color grey}File systems:
/ $color${fs_free /}/${fs_size /} ${fs_bar 6 /}
${color grey}Networking:
Up:$color ${upspeed eth0} k/s${color grey} - Down:$color ${downspeed eth0} k/s
$hr
${color grey}Name PID CPU% MEM%
${color lightgrey} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
|
I guess it shouldn't be like that since it's default configuration and it seems it fully depends on X USE flags. Just curious.. should I fill the bug report ?
Later I changed it to:
Code: |
TEXT
Uptime: $uptime
Frequency (in MHz):$freq
Frequency (in GHz):$freq_g
RAM Usage:$mem/$memmax - $memperc%
Swap Usage:$swap/$swapmax - $swapperc%
CPU Usage:$cpu%
Processes:$processes Running:$running_processes
File systems:
/ ${fs_free /}/${fs_size /}
Networking:
Up: ${upspeed eth0} k/s - Down: ${downspeed eth0} k/s
Name PID CPU% MEM%
${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
|
|
|
Back to top |
|
|
|