| View previous topic :: View next topic |
| Author |
Message |
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
 Posted: Wed Sep 30, 2009 3:48 pm Post subject: [Clavier usb] probleme clavier apres install en ssh |
 |
|
Hello,
[indulgence je suis un noob]
je viens d'installer une Gentoo en ssh depuis un autre ordi, cet autre ordi n'avait pas de clavier, j'ai donc pris e clavier de l'ordinateur à installer et je l'ai branché sur l'autre. Le souci c'est lorsque je remet ce clavier sur la nouvelle installation il n'est pas reconnu.
je précise qu'il est reconnu lors du boot sur grub.
Merci de vos lumières 
_________________
un noob parmis tant d'autre noob
Last edited by skizorager on Fri Oct 02, 2009 6:40 am; edited 3 times in total |
|
| Back to top |
|
 |
freezby
Tux's lil' helper
Joined: 07 Sep 2006
Posts: 103
Location: Angers, France
|
| Posted: Wed Sep 30, 2009 3:59 pm Post subject: |
|
|
Salut et bienvenue 
Alors dit nous en un peu plus :
C'est un clavier usb, autres ?
Il ne fonctionne pas quand ? Au niveau du shell après le boot, quand tu lance un serveur X ?
Vérifie bien ta configuration de ton noyau : Notamment la partie DEvice drivers >> Input device support ainsi que la partie concernant l'usb si ton clavier est branché en USB (tes autres périph usb fonctionnent) ??
Et copie nous éventuellement le résultat d'un dmesg. |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Wed Sep 30, 2009 4:13 pm Post subject: |
|
|
Hello Freezby, merci de ton acceuil
oui c'est un clavier USB. (déjà débranché et rebranché)
il fonctionne au grub mais pas au login en shell.
je n'ai meme pas encore installé mon interface graphique (peut paster d autre perif usb (faire du morse avec ma souris ?), j'ai fai une install vierge stage3, mis le sshd au boot et fai un emerge world c'est tout.
Concernant mon noyau, vu que je l'installais en ssh j'ai choisi genkernel pour avoir plus de chance de le reprendre au reboot (je l'ai installé de mon boulot, ce qui fu un succès, j'ai réussi à reprendre la main de mon boulot etc...)
sur l'autre machine je n'ai pas d'interface graphique non plus, c'est un dont je me sert comme relay ssh (vu que mon boulot bloque tout sauf le 80, je redirige le 80 public sur le 22 privé pour que je puisse prendre ce "relay" et ensuite relancer un ssh pour acceder a ma nouvelle machine (comme ça je sait si c'est mon reseau qui est down ou ma nouvelle install ki foire) il m'est donc difficile de te copier ce rapport dmesg et de le coller avec links ^^.
merci de vos réponses.
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Wed Sep 30, 2009 7:22 pm Post subject: |
|
|
| Code: | Initializing cgroup subsys cpuset
Linux version 2.6.30-gentoo-r5 (root@lux) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Wed Sep 30 20:29:58 CEST 2009
Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda4
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data)
BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS)
BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x130000 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 120000000 mask FF0000000 write-back
5 disabled
6 disabled
7 disabled
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcff90 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-00000000cff90000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cff90000 page 4k
kernel direct mapping tables up to cff90000 @ 10000-16000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ 14000-1a000
RAMDISK: 37d0f000 - 37fef9f8
ACPI: RSDP 00000000000f9d70 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cff90000 00038 (v01 092707 OEMRSDT 20070927 MSFT 00000097)
ACPI: FACP 00000000cff90200 00084 (v02 092707 OEMFACP 20070927 MSFT 00000097)
ACPI: DSDT 00000000cff90440 0605B (v01 P0013 P0013000 00000000 INTL 20051117)
ACPI: FACS 00000000cff9e000 00040
ACPI: APIC 00000000cff90390 0006C (v01 092707 OEMAPIC 20070927 MSFT 00000097)
ACPI: MCFG 00000000cff90400 0003C (v01 092707 OEMMCFG 20070927 MSFT 00000097)
ACPI: OEMB 00000000cff9e040 00071 (v01 092707 AMI_OEM 20070927 MSFT 00000097)
ACPI: GSCI 00000000cff9e0c0 02024 (v01 092707 GMCHSCI 20070927 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000088483c] TEXT DATA BSS ==> [0000200000 - 000088483c]
#3 [0037d0f000 - 0037fef9f8] RAMDISK ==> [0037d0f000 - 0037fef9f8]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000885000 - 000088514d] BRK ==> [0000885000 - 000088514d]
#6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002c5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cff90
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048351
DMA zone: 56 pages used for memmap
DMA zone: 1772 pages reserved
DMA zone: 2155 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833480 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000cff90000 - 00000000cff9e000
PM: Registered nosave memory: 00000000cff9e000 - 00000000cffe0000
PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 24 pages at ffff880028022000, static data 68128 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029555
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda4
Initializing CPU#0
NR_IRQS:1280
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 3000.344 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 4040448k/4980736k available (3957k kernel code, 787332k absent, 151964k reserved, 1265k data, 388k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.68 BogoMIPS (lpj=30003440)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.14 BogoMIPS (lpj=30000740)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (12000.83 BogoMIPS).
net_namespace: 1776 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - E8, should be E3 [20090320]
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ffc000-0xf9ffffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:00:1d.1: reg 20 io port: [0xc880-0xc89f]
pci 0000:00:1d.2: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:1d.3: reg 20 io port: [0xc480-0xc49f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffbc00-0xf9ffbfff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407]
pci 0000:00:1f.2: reg 14 io port: [0xc080-0xc083]
pci 0000:00:1f.2: reg 18 io port: [0xc000-0xc007]
pci 0000:00:1f.2: reg 1c io port: [0xbc00-0xbc03]
pci 0000:00:1f.2: reg 20 io port: [0xb880-0xb88f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe9fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfeac0000-0xfeafffff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfeaa0000-0xfeabffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.2: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:04:00.0: reg 10 32bit mmio: [0xfebf8000-0xfebfffff]
pci 0000:04:01.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:04:01.0: supports D1 D2
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:08: ioport range 0xa00-0xa0f has been reserved
system 00:08: ioport range 0xa10-0xa1f has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x480-0x4bf has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff has been reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xfa000000-0xfe9fffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0: IO window: 0xe000-0xefff
pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe9fffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 3 io: [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2946k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1254343012.689:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
GFS2 (built Sep 30 2009 20:26:59) installed
msgmni has been set to 7899
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
intel_rng: FWH not detected
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7
ide1: BM-DMA at 0xffa8-0xffaf
Probing IDE interface ide0...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
hda: PIONEER DVD-RW DVR-112D, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 388k freed
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
ata2.00: ATA-7: WDC WD2500JS-00NCB1, 10.02E02, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD2500JS-00N 10.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2461]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.03.01-k1
Emulex LightPulse Fibre Channel SCSI driver 8.3.1
Copyright(c) 2004-2009 Emulex. All rights reserved.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-2: new high speed USB device using ehci_hcd and address 2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usb 1-2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
usb 3-2: new full speed USB device using uhci_hcd and address 2
raid6: int64x1 1851 MB/s
usb 3-2: configuration #1 chosen from 1 choice
raid6: int64x2 2239 MB/s
raid6: int64x4 2068 MB/s
raid6: int64x8 1374 MB/s
raid6: sse2x1 3308 MB/s
raid6: sse2x2 4205 MB/s
raid6: sse2x4 5904 MB/s
raid6: using algorithm sse2x4 (5904 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 7332.000 MB/sec
xor: using function: generic_sse (7332.000 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
fuse init (API version 7.11)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
input: Tempest Habu Mouse as /class/input/input1
generic-usb 0003:1532:0009.0001: input,hidraw0: USB HID v10.01 Mouse [Tempest Habu Mouse] on usb-0000:00:1d.1-2/input0
input: Tempest Habu Mouse as /class/input/input2
generic-usb 0003:1532:0009.0002: input,hidraw1: USB HID v10.01 Keyboard [Tempest Habu Mouse] on usb-0000:00:1d.1-2/input1
usb 5-2: new low speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access WD 5000AAK External 1.05 PQ: 0 ANSI: 4
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 21 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3 sdb4
sd 2:0:0:0: [sdb] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
input: Power Button as /class/input/input3
ACPI: Power Button [PWRF]
input: Power Button as /class/input/input4
ACPI: Power Button [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
input: PC Speaker as /class/input/input5
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
atl1 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
atl1 0000:03:00.0: setting latency timer to 64
atl1 0000:03:00.0: version 2.1.3
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
ppdev: user-space parallel port driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
C-Media PCI 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
cfg80211: Calling CRDA to update world regulatory domain
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
rt61pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
EXT3 FS on sda4, internal journal
Adding 506036k swap on /dev/sda3. Priority:-1 extents:1 across:506036k
atl1 0000:03:00.0: irq 27 for MSI/MSI-X
atl1 0000:03:00.0: eth0 link is up 100 Mbps full duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
|
et avec un clavier PS2 hp basique ça fonctionne,
j'ai vérifier dans le noyau le input device, le keyboard est chargé en dur.
on peut voir que le clavier usb est bien reconnu dans la commande...
Il est branché à l'arriere j'ai essayé plusieurs ports, à l'avant aussi.
Mon disque dur USB fonctionne bien (mount et tout), c'est grace à lui que vous avez la commande.
autre info : ce n'est pas vraiment les touches qui ne fonctionnent pas, il est freezer, pendant le boot, j'ai allumer le numlock, et au moment du login, le numlock était freezer.
le clavier en question est un logitech elite keyboard.
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
freezby
Tux's lil' helper
Joined: 07 Sep 2006
Posts: 103
Location: Angers, France
|
| Posted: Wed Sep 30, 2009 8:05 pm Post subject: |
|
|
| La section Device drivers >> HID devices est-elle bien activée dans le noyau ??? Ainsi que la sous-option "USB Human interface device support" ?? |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Thu Oct 01, 2009 6:15 am Post subject: |
|
|
| freezby wrote: | | La section Device drivers >> HID devices est-elle bien activée dans le noyau ??? Ainsi que la sous-option "USB Human interface device support" ?? |
Affirmatif, le hid device est en dur, le usb human est en module et il me dit que c'est pas possible de le mettre en dur.
message precis :
| Code: | | This feature depends on another which has been configured as a module. As a result, this feature will be built as a module. |
Je précise egalement que sur une ancienne gentoo sur cette même machine, le même clavier fonctionnait,
je rappel egalement que j'ai fai mon noyau avec genkernel et l'option all, en toute logique toutes les options devraient etre la non ?
merci de vos (tes) reponses
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8708
Location: ~Brussels - Belgique
|
| Posted: Thu Oct 01, 2009 6:23 am Post subject: |
|
|
| skizorager wrote: | | je rappel egalement que j'ai fai mon noyau avec genkernel et l'option all, en toute logique toutes les options devraient etre la non ? |
Non 
Vérifie avec genkernel --menuconfig que c'est bien le cas.
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Thu Oct 01, 2009 6:37 am Post subject: |
|
|
oui oui, j'ai vérifier quand même c'est bien la.
Vu que je suis un noob je fais ce qu'on me dit ^^, et pas d'erreur a la compilation du kernel
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Thu Oct 01, 2009 10:09 am Post subject: |
|
|
encore un peut plus d'infos :
| Code: | lux / # zgrep USB_.HC /proc/config.gz|sed '/\#/d'
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
|
| Code: | lux / # lspci|grep -i usb
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
|
| Code: | lux / # dmesg|tail
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt61pci-phy0::radio
Registered led device: rt61pci-phy0::assoc
EXT3 FS on sda4, internal journal
Adding 506036k swap on /dev/sda3. Priority:-1 extents:1 across:506036k
atl1 0000:03:00.0: irq 27 for MSI/MSI-X
atl1 0000:03:00.0: eth0 link is up 100 Mbps full duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
|
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
brubru
Tux's lil' helper
Joined: 14 May 2008
Posts: 109
Location: France
|
| Posted: Thu Oct 01, 2009 11:32 am Post subject: |
|
|
Salut.
En vrac quelques commandes qui peuvent t'aider:
lsmod
( pour voir les modules chargés )
lsusb
( pour voir les périphériques usb , --verbose pour avoir plus d'options )
ls -lR /dev/input
( liste les périphériques d'entrée, chaque fichier eventX correspond à un inputX listé dans dmesg)
ls -l /sys/class/input
( un peu la même chose mais du point de vue du kernel: tu as, à la fois les périphériques d'entrée (inputX) et les interfaces kernel<->userspace (eventX, mouseX, jsX )
enfin il existe un petit utilitaire pour tester les /dev/input/eventX: evtest fournit par le paquet games-util/joystick
d'après ton dmesg tu as:
| Code: | input: Macintosh mouse button emulation as /class/input/input0
input: Tempest Habu Mouse as /class/input/input1
generic-usb 0003:1532:0009.0001: input,hidraw0: USB HID v10.01 Mouse [Tempest Habu Mouse] on usb-0000:00:1d.1-2/input0
input: Tempest Habu Mouse as /class/input/input2
generic-usb 0003:1532:0009.0002: input,hidraw1: USB HID v10.01 Keyboard [Tempest Habu Mouse] on usb-0000:00:1d.1-2/input1
input: Power Button as /class/input/input3
input: Power Button as /class/input/input4
input: PC Speaker as /class/input/input5 |
donc ton clavier devrait être /dev/input/event2
essaye en root: evtest /dev/input/event2
après tu appuis sur ton clavier et tu vois des événements sur la console.
Concernant la config du noyau, regarde aussi les sections Device Drivers -> Input device support (préfixe CONFIG_INPUT) et HID Devices (préfixe CONFIG_HID); il n'y a pas que la section USB qui est concernée.
Bruno |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Thu Oct 01, 2009 12:23 pm Post subject: |
|
|
Hello bruno,
merci de ta réponse et de ton intérêt a mon problème. Voici le résultat des quelques commandes.
première comande, e vous affolez pas, c'est un genkernel, une fois ma machine correctement installée, je ferais mon propre kernel.
| Code: | lux ~ # lsmod
Module Size Used by
ipv6 198464 16
arc4 1000 2
ecb 1320 2
rt61pci 15436 0
rt2x00pci 3816 1 rt61pci
snd_hda_codec_realtek 216044 1
rt2x00lib 17800 2 rt61pci,rt2x00pci
led_class 1904 1 rt2x00lib
input_polldev 1464 1 rt2x00lib
mac80211 104852 2 rt2x00pci,rt2x00lib
i2c_i801 7140 0
cfg80211 47680 2 rt2x00lib,mac80211
atl1 23312 0
snd_hda_intel 15848 0
snd_cmipci 22944 0
intel_agp 20880 0
snd_hda_codec 40008 2 snd_hda_codec_realtek,snd_hda_intel
i2c_core 12768 1 i2c_i801
mii 3016 1 atl1
gameport 5944 1 snd_cmipci
rtc_cmos 6488 0
snd_opl3_lib 6120 1 snd_cmipci
pcspkr 1224 0
eeprom_93cx6 1096 1 rt61pci
snd_mpu401_uart 3720 1 snd_cmipci
rtc_core 10052 1 rtc_cmos
ppdev 5104 0
rtc_lib 1384 1 rtc_core
thermal 10088 0
parport_pc 27496 0
snd_rawmidi 12608 1 snd_mpu401_uart
snd_hwdep 4144 2 snd_hda_codec,snd_opl3_lib
processor 25864 0
parport 24464 2 ppdev,parport_pc
snd_pcm 45264 3 snd_hda_intel,snd_cmipci,snd_hda_codec
button 3496 0
thermal_sys 9504 2 thermal,processor
snd_seq_device 3612 2 snd_opl3_lib,snd_rawmidi
snd_timer 13208 2 snd_opl3_lib,snd_pcm
snd_page_alloc 5176 2 snd_hda_intel,snd_pcm
snd 36712 11 snd_hda_codec_realtek,snd_hda_intel,snd_cmipci,snd_hda_codec,snd_opl3_lib,snd_mpu401_uart,snd_rawmidi,snd_hwdep,snd_pcm,snd_seq_device,snd_timer
tg3 89676 0
libphy 10728 1 tg3
e1000 93644 0
fuse 39280 0
nfs 107992 0
lockd 50132 1 nfs
sunrpc 132168 2 nfs,lockd
jfs 134960 0
raid10 15272 0
raid456 39208 0
async_memcpy 1000 1 raid456
async_xor 2056 1 raid456
xor 4024 2 raid456,async_xor
async_tx 1512 3 raid456,async_memcpy,async_xor
raid6_pq 76328 1 raid456
raid1 15752 0
raid0 4972 0
dm_bbr 7648 0
dm_snapshot 14204 0
dm_mirror 9456 0
dm_region_hash 5064 1 dm_mirror
dm_log 5868 2 dm_mirror,dm_region_hash
dm_mod 37736 4 dm_bbr,dm_snapshot,dm_mirror,dm_log
scsi_wait_scan 520 0
sbp2 16276 0
ohci1394 23492 0
ieee1394 52224 2 sbp2,ohci1394
sl811_hcd 8040 0
usbhid 18176 0
ohci_hcd 17764 0
ssb 28280 1 ohci_hcd
uhci_hcd 16192 0
usb_storage 35360 0
ehci_hcd 25588 0
usbcore 97712 7 sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd
lpfc 227908 0
qla2xxx 174580 0
megaraid_sas 28796 0
megaraid_mbox 22648 0
megaraid_mm 5768 1 megaraid_mbox
megaraid 35272 0
aacraid 54960 0
sx8 10392 0
DAC960 57840 0
cciss 31400 0
3w_9xxx 27620 0
3w_xxxx 19968 0
mptsas 20088 0
scsi_transport_sas 17064 1 mptsas
mptfc 9296 0
scsi_transport_fc 29004 3 lpfc,qla2xxx,mptfc
scsi_tgt 7024 1 scsi_transport_fc
mptspi 9656 0
mptscsih 14920 3 mptsas,mptfc,mptspi
mptbase 49828 4 mptsas,mptfc,mptspi,mptscsih
atp870u 24736 0
dc395x 25332 0
qla1280 17776 0
dmx3191d 8360 0
sym53c8xx 59344 0
gdth 70728 0
advansys 51872 0
initio 14056 0
BusLogic 18176 0
arcmsr 16224 0
aic7xxx 97084 0
aic79xx 101692 0
scsi_transport_spi 14408 5 mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx
sg 19040 0
videobuf_core 10732 0
pdc_adma 4748 0
sata_inic162x 6220 0
sata_mv 21692 0
ata_piix 19532 3
ahci 24536 0
sata_qstor 4652 0
sata_vsc 3596 0
sata_uli 2636 0
sata_sis 3788 0
sata_sx4 7180 0
sata_nv 17488 0
sata_via 7212 0
sata_svw 3564 0
sata_sil24 9388 0
sata_sil 6512 0
sata_promise 8108 0
pata_sl82c105 2792 0
pata_cs5530 3720 0
pata_cs5520 3272 0
pata_via 6864 0
pata_jmicron 2024 0
pata_marvell 2248 0
pata_sis 8972 1 sata_sis
pata_netcell 1868 0
pata_sc1200 2504 0
pata_pdc202xx_old 3560 0
pata_triflex 2540 0
pata_atiixp 2952 0
pata_opti 2348 0
pata_amd 9036 0
pata_ali 8184 0
pata_it8213 2924 0
pata_pcmcia 9256 0
pcmcia 22752 2 ssb,pata_pcmcia
firmware_class 4408 6 rt2x00lib,tg3,qla2xxx,qla1280,advansys,pcmcia
pcmcia_core 20644 2 ssb,pcmcia
pata_ns87415 2476 0
pata_ns87410 2344 0
pata_serverworks 4584 0
pata_platform 2856 0
pata_artop 4012 0
pata_it821x 7244 0
pata_optidma 3824 0
pata_hpt3x2n 4168 0
pata_hpt3x3 2572 0
pata_hpt37x 9992 0
pata_hpt366 4456 0
pata_cmd64x 4936 0
pata_efar 2924 0
pata_rz1000 2284 0
pata_sil680 3916 0
pata_radisys 2476 0
pata_pdc2027x 5484 0
pata_mpiix 2444 0
libata 114636 51 pdc_adma,sata_inic162x,sata_mv,ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,
sata_nv,sata_via,sata_svw,sata_sil24,sata_sil,sata_promise,pata_sl82c105,pata_cs5530,pata_cs5520,pata_via,
pata_jmicron,pata_marvell,pata_sis,pata_netcell,pata_sc1200,pata_pdc202xx_old,pata_triflex,pata_atiixp,pata_opti,pata_amd,pata_ali,
pata_it8213,pata_pcmcia,pata_ns87415,pata_ns87410,pata_serverworks,pata_platform,pata_artop,pata_it821x,pata_optidma,pata_hpt3x2n,
pata_hpt3x3,pata_hpt37x,pata_hpt366,pata_cmd64x,pata_efar,pata_rz1000,pata_sil680,pata_radisys,pata_pdc2027x,pata_mpiix |
après une install du packet usbutils
| Code: | lux ~ # lsusb --verbose
Bus 002 Device 002: ID 046d:c30a Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc30a
bcdDevice 15.00
iManufacturer 1 Logitech
iProduct 2 Logitech USB Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 64
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 156
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 32
Device Status: 0x0000
(Bus Powered)
Bus 002 Device 001: ID 1d6b:0001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b
idProduct 0x0001
bcdDevice 2.06
iManufacturer 3 Linux 2.6.30-gentoo-r5 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 002: ID 1532:0009
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1532
idProduct 0x0009
bcdDevice 21.00
iManufacturer 1 Tempest
iProduct 2 Habu Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 10.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 73
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 10.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 47
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 8
Device Status: 0x0000
(Bus Powered)
Bus 003 Device 001: ID 1d6b:0001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b
idProduct 0x0001
bcdDevice 2.06
iManufacturer 3 Linux 2.6.30-gentoo-r5 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0103 power enable connect
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 001: ID 1d6b:0001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b
idProduct 0x0001
bcdDevice 2.06
iManufacturer 3 Linux 2.6.30-gentoo-r5 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 003: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1058 Western Digital Technologies, Inc.
idProduct 0x1001 External Hard Disk
bcdDevice 1.05
iManufacturer 1 Western Digital
iProduct 2 External HDD
iSerial 3 574D41535930373034353031
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b
idProduct 0x0002
bcdDevice 2.06
iManufacturer 3 Linux 2.6.30-gentoo-r5 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 001: ID 1d6b:0001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b
idProduct 0x0001
bcdDevice 2.06
iManufacturer 3 Linux 2.6.30-gentoo-r5 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
|
On dirait que la com avec le kernel passe bien aussi.
| Code: | lux ~ # ls -l /sys/class/input
total 0
lrwxrwxrwx 1 root root 0 Oct 1 08:51 event0 -> input0/event0
lrwxrwxrwx 1 root root 0 Oct 1 08:51 event1 -> input1/event1
lrwxrwxrwx 1 root root 0 Oct 1 08:51 event2 -> input2/event2
lrwxrwxrwx 1 root root 0 Oct 1 15:49 event3 -> input3/event3
lrwxrwxrwx 1 root root 0 Oct 1 15:49 event4 -> input4/event4
lrwxrwxrwx 1 root root 0 Oct 1 15:49 event5 -> input5/event5
drwxr-xr-x 7 root root 0 Oct 1 08:51 input0
drwxr-xr-x 7 root root 0 Oct 1 08:51 input1
drwxr-xr-x 6 root root 0 Oct 1 08:51 input2
drwxr-xr-x 6 root root 0 Oct 1 08:51 input3
drwxr-xr-x 6 root root 0 Oct 1 08:51 input4
drwxr-xr-x 6 root root 0 Oct 1 08:51 input5
drwxr-xr-x 3 root root 0 Oct 1 08:51 mice
lrwxrwxrwx 1 root root 0 Oct 1 08:51 mouse0 -> input0/mouse0
lrwxrwxrwx 1 root root 0 Oct 1 08:51 mouse1 -> input1/mouse1
|
je ne crois pas que mon clavier est en input2 comme tu peux voir :
| Code: | | input: Tempest Habu Mouse as /class/input/input2 |
habu c'est ma souris razor, ce qui m'amene a demander si ca c'est normal :
| Code: | | generic-usb 0003:1532:0009.0002: input,hidraw1: USB HID v10.01 Keyboard [Tempest Habu Mouse] on usb-0000:00:1d.1-2/input1 |
je ne sais pas tester maintenant la commande evtest, vu que je suis a 35Km de mon clavier (je suis encore en ssh)
pour le noyau, j'ai ajouter le module speciale HID logitech, on vera ce que cela donne.
EDIT : Souci de mise en forme.
-- ks
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
brubru
Tux's lil' helper
Joined: 14 May 2008
Posts: 109
Location: France
|
| Posted: Thu Oct 01, 2009 1:53 pm Post subject: |
|
|
Re-salut.
| Quote: |
je ne crois pas que mon clavier est en input2 comme tu peux voir :
Code:
input: Tempest Habu Mouse as /class/input/input2
habu c'est ma souris razor, ce qui m'amene a demander si ca c'est normal :
Code:
generic-usb 0003:1532:0009.0002: input,hidraw1: USB HID v10.01 Keyboard [Tempest Habu Mouse] on usb-0000:00:1d.1-2/input1
|
d'accord, donc t'as souris enregistre deux periphériques, un de type souris (/class/input/input1) et un de type clavier (/class/input/input2). Peut-être que cela pose problème, donc ça vaudrait le coup d'essayer avec la souris débranchée.
Donc ton clavier n'appairait pas dans le dmesg.
| Quote: |
je ne sais pas tester maintenant la commande evtest, vu que je suis a 35Km de mon clavier (je suis encore en ssh)
|
en fait, rien quand le lançant tu peux tout de même identifier le périphérique:
| Code: |
evtest /dev/input/event3
Input driver version is 1.0.0
Input device ID: bus 0x11 vendor 0x1 product 0x1 version 0xab41
Input device name: "AT Translated Set 2 keyboard"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 0 (Reserved)
Event code 1 (Esc)
Event code 2 (1)
[...]
|
pour un clavier ps2
| Code: |
evtest /dev/input/event0
Input driver version is 1.0.0
Input device ID: bus 0x19 vendor 0x0 product 0x1 version 0x0
Input device name: "Power Button"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 116 (Power)
Testing ... (interrupt to exit)
|
pour le boutton d'alimentation
mais les liens symboliques dans /dev/input/by-path et /dev/input/by-id te donnerons aussi ces informations.
| Quote: |
pour le noyau, j'ai ajouter le module speciale HID logitech, on vera ce que cela donne.
|
oui, bonne idée, car si ton clavier n'ai pas détecté par le noyau, c'est que le module hid normal ne doit pas être suffisant.
d'ailleurs, modinfo hid-logitech me donne:
| Code: |
filename: /lib/modules/2.6.30-gentoo-r5/kernel/drivers/hid/hid-logitech.ko
license: GPL
[...]
alias: hid:b0003v0000 046D p0000 C30A <-- et d'après lsusb : Bus 002 Device 002: ID 046d:c30a Logitech, Inc.
[...]
depends: hid
vermagic: 2.6.30-gentoo-r5 mod_unload K7
|
Bruno. |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Thu Oct 01, 2009 2:16 pm Post subject: |
|
|
| brubru wrote: | ça vaudrait le coup d'essayer avec la souris débranchée.
|
C'est la première chose prévue quand je rentre
le packet joystick est masque par AMD64, je le démasque ou y a un autre outil ?
Pour ma souris, je crois savoir pourquoi il prend 2entree, ma souris est une razor avec bouton macro programable, ce qui est louche c'est que ca a déjà fonctionne sur une ancienne install et sur d'autres linux (j'ai tester Mandriva).
Merci beaucoup de vos réponses très complètes.
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Thu Oct 01, 2009 3:31 pm Post subject: |
|
|
rep,
eh ben voilà ça fonctionne, avec ma souris branchée
je vous dit ce que j'ai fait pour cela :
j'ai chargé le module usbcore
et j'ai ajouter le module spécial HID Logitech a mon kernel et ça roule
Merci à tous de vos réponse et de votre aide.
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
freezby
Tux's lil' helper
Joined: 07 Sep 2006
Posts: 103
Location: Angers, France
|
| Posted: Thu Oct 01, 2009 5:08 pm Post subject: |
|
|
| Alors amuse toi bien avec ta gentoo |
|
| Back to top |
|
|
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8708
Location: ~Brussels - Belgique
|
| Posted: Fri Oct 02, 2009 5:53 am Post subject: |
|
|
Hmm, as-tu mis udev dans le runlevel sysvinit ?
Et vérifie que coldplug et hotplug sont activés dans /etc/rc.conf et/ou /etc/conf.d/rc
C'est quand même bizarre qu'un module aussi important ne soit pas chargé par défaut.
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Fri Oct 02, 2009 6:36 am Post subject: |
|
|
Hello xa,
merci de ta reponse complementaire, en effet le souci n'est plus aparant apres le chargement du module, mais avant il y a toujours un souci, je m'explique :
j'ai rebranche mon 1er disque sata, l'arborescence a donc change de sda1 a sdb1, le boot a dont foirer et m a demander de choisir un bon root, la le clavier etait innactif, j'ai du passer par le live cd et editer le grub.conf puis ca a fonctionner.
oui les 2 options coldplug et hotplug sont bien activée dans /etc/conf.d/rc absente dans /etc/rc.conf
| XavierMiller wrote: | Hmm, as-tu mis udev dans le runlevel sysvinit ?
|
la je vois pas de quoi tu parles, voici un rc-update show
| Code: | lux sdc4 # rc-update show
bootmisc | boot
checkfs | boot
checkroot | boot
clock | boot
consolefont | boot
hostname | boot
keymaps | boot
local | default nonetwork
localmount | boot
modules | boot
net.eth0 | default
net.lo | boot
netmount | default
rmnologin | boot
sshd | default
syslog-ng | default
urandom | boot |
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8708
Location: ~Brussels - Belgique
|
| Posted: Fri Oct 02, 2009 6:55 am Post subject: |
|
|
et ?
Ajoute udev dans sysinit : | Code: | | rc-update add udev sysinit |
et redémarre, le module devrait être chargé automatiquement.
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Fri Oct 02, 2009 7:13 am Post subject: |
|
|
| Code: | lux sdc4 # rc-update -v show
bootmisc | boot
checkfs | boot
checkroot | boot
clock | boot
consolefont | boot
crypto-loop |
gpm |
hostname | boot
keymaps | boot
local | default nonetwork
localmount | boot
modules | boot
net.eth0 | default
net.lo | boot
netmount | default
nscd |
numlock |
pciparm |
pydoc-2.4 |
pydoc-2.5 |
rmnologin | boot
rsyncd |
sshd | default
syslog-ng | default
udev |
udev-dev-tarball |
udev-mount |
udev-postmount |
urandom | boot |
c'est deja le cas
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8708
Location: ~Brussels - Belgique
|
| Posted: Fri Oct 02, 2009 7:15 am Post subject: |
|
|
bah non, udev n'est associé à aucun runlevel, donc le hotplug/coldplug ne s'active pas
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Fri Oct 02, 2009 7:26 am Post subject: |
|
|
| XavierMiller wrote: | | bah non, udev n'est associé à aucun runlevel, donc le hotplug/coldplug ne s'active pas |
oups, juste, excuse moi ^^.
j'ai fai un ls /etc/runlevel et je n'ai que :
boot default nonetwork single
donc je l'ai mis en boot, on verra bien ce que ca donne (je suis a 35Km de mon clavier)
En tout cas merci de ton complément d'informations
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8708
Location: ~Brussels - Belgique
|
| Posted: Fri Oct 02, 2009 7:48 am Post subject: |
|
|
oui, mets-le en boot, apparemment, tu es en "baselayout 1" et pas en "baselayout 2 / openrc"
Une fois que c'est booté, fais immédiatement un "lsmod", et tu devrais voir "usbcore" et plein d'autres choses.
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
skizorager
n00b
Joined: 09 Nov 2006
Posts: 69
Location: Liege
|
| Posted: Sat Oct 03, 2009 10:08 am Post subject: |
|
|
oui je suis en baselayout1, d'ailleur dès que j'ai activer udev au boot il me dit qu'il y a un truc qui cloche avec udev et ssh et le baselayout, je l'ai donc enlever du boot
concernant le usbcore, il était déjà en boot, voir message plus haut dans mon 1er lsmod du sujet.
_________________
un noob parmis tant d'autre noob |
|
| Back to top |
|
|
brubru
Tux's lil' helper
Joined: 14 May 2008
Posts: 109
Location: France
|
| Posted: Sat Oct 03, 2009 10:49 am Post subject: |
|
|
En baselayout-1, udev est lancé automatiquement à l'init par le script /lib/rcscripts/addons/udev-start.sh
Avec openRC/baselayout-2, udev est un script init comme les autres et doit être dans le runlevel sysinit. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
