| View previous topic :: View next topic |
| Author |
Message |
smellycheeseboy
Apprentice
Joined: 15 May 2003
Posts: 263
Location: The Future
|
 Posted: Fri Oct 10, 2003 12:55 am Post subject: Epson Printer not working?? |
 |
|
I have an Epson Stylus Color 880 that is hooked up with a usb cord. I've tried a number of things to get it working including the linuxprinting.org directions for cups and the gentoo instructions for printing. Neither have worked. The specific problem that i'm having is that in the localhost:631/admin whenever i try to print anything it says that the | Quote: | | Printer is not connected; will retry in 30 seconds... |
Does anybody know what is wrong and how to fix it? Thanks.
Me |
|
| Back to top |
|
 |
smellycheeseboy
Apprentice
Joined: 15 May 2003
Posts: 263
Location: The Future
|
| Posted: Fri Oct 10, 2003 2:05 am Post subject: |
|
|
When I tried the Gentoo howto on printing it said to look in /var/log/messages to see if it is seeing the printer but I don't have that folder. Also there is nothing in my /dev/usb directory. I was looking at other posts and they were all including dmesg info so here is mine.
| Code: | Linux version 2.4.20-gentoo-r2 (root@cros5-154-dhcp.resnet.colorado.edu) (gcc version 3.2.2) #8 SMP Sun May 11 02:30:56 UTC 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ff87000 (usable)
BIOS-e820: 000000000ff87000 - 000000000ffa6000 (ACPI data)
BIOS-e820: 000000000ffa6000 - 0000000010000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 000f0000 reserved twice.
On node 0 totalpages: 65415
zone(0): 4096 pages.
zone(1): 61319 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
IMCR and PIC compatibility mode.
SMP mptable: null local APIC address!
BIOS bug, MP table errors detected!...
... disabling SMP support. (tell your hw vendor)
Kernel command line: root=/dev/hda6 "hdc=ide-scsi"
No local APIC present or hardware disabled
Initializing CPU#0
Detected 1483.103 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2955.67 BogoMIPS
Memory: 255064k/261660k available (2153k kernel code, 6212k reserved, 639k data, 152k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU: Common caps: 3febf9ff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU: Common caps: 3febf9ff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
per-CPU timeslice cutoff: 731.30 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfc10e, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller on PCI bus 00 dev f9
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 5T060H6, ATA DISK drive
hdc: SAMSUNG DVD-ROM SD-616, ATAPI CD/DVD-ROM drive
hdd: _NEC CD-RW NR-7800A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0434564, I/O limit 4095Mb (mask 0xffffffff)
hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63, UDMA(100)
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > p3 p4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Intel i850 chipset
agpgart: AGP aperture is 128M @ 0xe8000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Intel i850 @ 0xe8000000 128MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] AGP 0.99 on Intel i850 @ 0xe8000000 128MB
[drm] Initialized i810 1.2.0 20010920 on minor 2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:1f.2
PCI: Sharing IRQ 11 with 02:0a.0
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0xff60, IRQ 9
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 152k freed
Adding Swap: 506036k swap-space (priority -1)
PCI: Found IRQ 11 for device 02:0c.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
02:0c.0: 3Com PCI 3c905C Tornado at 0xec00. Vers LK1.1.16
usb.c: unable to get major 180 for usb devices
usb.c: registered new driver hub
PCI: Found IRQ 11 for device 02:0a.0
PCI: Sharing IRQ 11 with 00:1f.2
hub.c: new USB device 00:1f.4-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x4b8/0x5) is not claimed by any active driver.
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
|
If anybody can help with this I appreciate it.
Me |
|
| Back to top |
|
|
smellycheeseboy
Apprentice
Joined: 15 May 2003
Posts: 263
Location: The Future
|
| Posted: Fri Oct 10, 2003 6:22 am Post subject: |
|
|
Alright I have done a lot of stuff in the last few hours and what I gather is that i need to but it comes up with this error | Code: | /lib/modules/2.4.20-gentoo-r2/kernel/drivers/usb/usb-uhci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-gentoo-r2/kernel/drivers/usb/usb-uhci.o: insmod /lib/modules/2.4.20-gentoo-r2/kernel/drivers/usb/usb-uhci.o failed
/lib/modules/2.4.20-gentoo-r2/kernel/drivers/usb/usb-uhci.o: insmod usb-uhci failed
|
I have built this into my kernel as a module and done all that stuff.
I am at a loss. Help!
Me |
|
| Back to top |
|
|
smellycheeseboy
Apprentice
Joined: 15 May 2003
Posts: 263
Location: The Future
|
| Posted: Fri Oct 10, 2003 6:25 am Post subject: |
|
|
This is my new dmesg after all the crap I have done.
| Code: | Linux version 2.4.20-gentoo-r2 (root@cros5-154-dhcp.resnet.colorado.edu) (gcc version 3.2.2) #8 SMP Sun May 11 02:30:56 UTC 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ff87000 (usable)
BIOS-e820: 000000000ff87000 - 000000000ffa6000 (ACPI data)
BIOS-e820: 000000000ffa6000 - 0000000010000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 000f0000 reserved twice.
On node 0 totalpages: 65415
zone(0): 4096 pages.
zone(1): 61319 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
IMCR and PIC compatibility mode.
SMP mptable: null local APIC address!
BIOS bug, MP table errors detected!...
... disabling SMP support. (tell your hw vendor)
Kernel command line: root=/dev/hda6 "hdc=ide-scsi"
No local APIC present or hardware disabled
Initializing CPU#0
Detected 1483.092 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2955.67 BogoMIPS
Memory: 255064k/261660k available (2153k kernel code, 6212k reserved, 639k data, 152k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU: Common caps: 3febf9ff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU: Common caps: 3febf9ff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
per-CPU timeslice cutoff: 731.30 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfc10e, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller on PCI bus 00 dev f9
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 5T060H6, ATA DISK drive
hdc: SAMSUNG DVD-ROM SD-616, ATAPI CD/DVD-ROM drive
hdd: _NEC CD-RW NR-7800A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0434564, I/O limit 4095Mb (mask 0xffffffff)
hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63, UDMA(100)
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > p3 p4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Intel i850 chipset
agpgart: AGP aperture is 128M @ 0xe8000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Intel i850 @ 0xe8000000 128MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] AGP 0.99 on Intel i850 @ 0xe8000000 128MB
[drm] Initialized i810 1.2.0 20010920 on minor 2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:1f.2
PCI: Sharing IRQ 11 with 02:0a.0
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0xff60, IRQ 9
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
reiserfs: checking transaction log (device 03:06) ...
Warning, log replay starting on readonly filesystem
hub.c: new USB device 00:1f.4-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x4b8/0x5) is not claimed by any active driver.
reiserfs: replayed 3 transactions in 1 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 152k freed
Adding Swap: 506036k swap-space (priority -1)
PCI: Found IRQ 11 for device 02:0c.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
02:0c.0: 3Com PCI 3c905C Tornado at 0xec00. Vers LK1.1.16
usb-uhci.c: $Revision: 1.275 $ time 00:14:07 Oct 10 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: unable to get major 180 for usb devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:14:07 Oct 10 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb-uhci.c: $Revision: 1.275 $ time 00:14:07 Oct 10 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
|
Me |
|
| Back to top |
|
|
smellycheeseboy
Apprentice
Joined: 15 May 2003
Posts: 263
Location: The Future
|
| Posted: Fri Oct 10, 2003 6:30 am Post subject: |
|
|
Also I merged hotplugging and when I start it it says this | Code: | Starting USB and PCI hotplugging...
/etc/hotplug/pci.agent: line 173: 6034 Segmentation fault $MODPROBE $MODULE >/dev/null 2>&1 |
Me |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
