| View previous topic :: View next topic |
| Author |
Message |
darkmanPPT
Veteran
Joined: 13 Apr 2006
Posts: 1069
Location: vi/bo
|
 Posted: Sat May 16, 2009 10:03 am Post subject: [solved]Cannot open display :0 all'avvio! |
 |
|
Come dal soggetto,
carico linux (2.6.27-gentoo-r711) esegue il caricamento dei vari serizi, quando arriva a caricare XDM (che io ho impostato che apra kdm) carica una bella schermata vuota con il cursore da bash non lampeggiante in alto a sx.
vado a vedere con alt F12 i messaggi d'errore e vedo un bel "Cannot open display :0" 
Come si è ben capito, xdm si carica, ma.. non fa vedere nulla. Il pc non si pianta, anzi, è reattivo.
Io switcho su una console testuale e da root eseguo | Code: | | /etc/init.d/xdm restart |
e, magicamente si carica kdm correttamente.
(potrrei anche fare startx e caricarmi a manina kde, ma preferisco riavviare xdm)
Qualche programma sta usando prima di xorg il display?
e allora per quale motivo poi funziona?
Nota finale: non ho installato/aggiornato alcunchè nè ho modificato la conf di alcun programa dall'ultima volta che ho usato il pc senza tale problema (ieri mattina)! Non ho mai avuto tale problema sul pc e tutto è successo ieri pomeriggio inspiegabilmente e continua a capitare anche adesso.
da cosa può essere causato tutto ciò? non riesco proprio a spiegarmi il motivo.
Qualcuno ha qualche idea?
ps: ieri mi è capitato di mettere il pc (è un notebook) in standby e al riavvio s'è piantato kde (tipo freeze): bloccato tutto! io ho riavviato il pc ma non ho avuto il problema sopra descritto. Che il demone di power management di kde abbia incasinato un po' xorg? in teoria non dovrebbe, non gira mica da root!
_________________
Darkman
Last edited by darkmanPPT on Tue Aug 25, 2009 9:28 am; edited 1 time in total |
|
| Back to top |
|
 |
darkmanPPT
Veteran
Joined: 13 Apr 2006
Posts: 1069
Location: vi/bo
|
| Posted: Wed Aug 05, 2009 1:32 pm Post subject: |
|
|
Dato che non sono riuscito ancora a risolvere il problema, richiamo il topic, magari qualcuno c'ha delle idee
Nel frattempo ho tolto il file xorg.conf, come da guida sul passaggio ad xorg 1.5 (l'ho semplicemente ridenominato)
Le problematiche sono ancora identiche a prima.
_________________
Darkman |
|
| Back to top |
|
|
Apetrini
Veteran
Joined: 09 Feb 2005
Posts: 1158
|
| Posted: Wed Aug 12, 2009 2:56 pm Post subject: |
|
|
Purtroppo le info che fornisci sono pochine...
Quando succede, PRIMA di rilanciare xdm, postaci il file di log di xorg.
Altra domanda... che scheda grafica usi e che driver?
Usi openrc? Lo startup di boot è impostato su "parallel_startup=yes" (non ricordo il nome preciso, su openrc è rc_parallel) ?
Sei sicuro di aver messo xdm nel runlevel giusto, ovvero in quello di default?
_________________
Linux ape 2.6.31-vanilla. Paludis since 0.28.0. |
|
| Back to top |
|
|
darkmanPPT
Veteran
Joined: 13 Apr 2006
Posts: 1069
Location: vi/bo
|
| Posted: Thu Aug 13, 2009 10:32 am Post subject: |
|
|
Ciao allora..
Ho una ati x300 ed uso i driver open (x11-base/xorg-server 1.5.3-r5)
Il log di xorg lo posto appena possibile, riavvio 
| Quote: | | Usi openrc? Lo startup di boot è impostato su "parallel_startup=yes" (non ricordo il nome preciso, su openrc è rc_parallel) ? |
non uso openrc e ho RC_PARALLEL_STARTUP="no"
| Quote: | | Sei sicuro di aver messo xdm nel runlevel giusto, ovvero in quello di default? |
| Code: | rc-update show default
clamd | default
dbus | default
hald | default
hdparm | default
local | default
netmount | default
syslog-ng | default
timidity | default
vixie-cron | default
wicd | default
xdm | default
|
si
Io in parte ho risolto impostando su /usr/share/config/kdm/kdmrc la voce ServerAttempts=2
| Code: | # Core config for local displays
[X-:*-Core]
# How often to try to run the X-server. Running includes executing it and
# waiting for it to come up.
# Default is 1
ServerAttempts=2
# How long to wait for a local X-server to come up.
# Default is 15
ServerTimeout=15
.....
|
Log di KDM
| Code: | cat kdm.log
********************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
********************************************************************************
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r711 i686
Current Operating System: Linux upupa 2.6.29-gentoo-r52 #2 PREEMPT Tue Aug 11 19:15:51 CEST 2009 i686
Build Date: 28 April 2009 03:48:01PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 13 12:40:39 2009
(EE) Unable to locate/open config file
New driver is "ati"
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
FATAL: Module radeon not found.
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-D
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x1b0
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
finished output detect: 1
finished output detect: 2
finished output detect: 3
finished all detect
before xf86InitialConfiguration
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
disable primary dac
disable FP1
disable LVDS
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable primary dac
disable FP1
disable TV
disable LVDS
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
|
Log di Xorg
[code] cat Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r711 i686
Current Operating System: Linux upupa 2.6.29-gentoo-r52 #2 PREEMPT Tue Aug 11 19:15:51 CEST 2009 i686
Build Date: 28 April 2009 03:48:01PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 13 12:40:39 2009
(EE) Unable to locate/open config file
(II) Loader magic: 0x9a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc M22 [Mobility Radeon X300] rev 0, Mem @ 0xd0000000/0, 0xc8100000/0, I/O @ 0x00003000/0, BIOS @ 0x????????/131072
(==) Matched ati for the autoconfigured driver
New driver is "ati"
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default fbdev Screen 0"
Screen "Builtin Default vesa Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 6.12.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 6.12.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
.......<inutile inserire tutto>
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c8100000
(II) RADEON(0): MMIO registers at 0x00000000c8100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility X300 (M22) 5460 (PCIE)" (ChipID = 0x5460)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "radeon"
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 23000, sclk: 230.000000, mclk: 325.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000; xclk=23000
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Panel ID string: LPL
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71250
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-D
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): Port2:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x1b0
(II) RADEON(0): Port3:
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
(II) RADEON(0): Year: 2005 Week: 0
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.344 greenX: 0.323 greenY: 0.534
(II) RADEON(0): blueX: 0.156 blueY: 0.138 whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz Image Size: 330 x 210 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block 0
(II) RADEON(0): LGPhilipsLCD
(II) RADEON(0): LP154W01-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff00320c000000000000
(II) RADEON(0): 000f0102802115780a0f109758528828
(II) RADEON(0): 23505400000001010101010101010101
(II) RADEON(0): 010101010101d51b00a0502017303020
(II) RADEON(0): 26002115100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 475068696c6970734c43440a000000fe
(II) RADEON(0): 004c503135345730312d544c41320008
finished output detect: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 3
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
(II) RADEON(0): Year: 2005 Week: 0
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.344 greenX: 0.323 greenY: 0.534
(II) RADEON(0): blueX: 0.156 blueY: 0.138 whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz Image Size: 330 x 210 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block 0
(II) RADEON(0): LGPhilipsLCD
(II) RADEON(0): LP154W01-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff00320c000000000000
(II) RADEON(0): 000f0102802115780a0f109758528828
(II) RADEON(0): 23505400000001010101010101010101
(II) RADEON(0): 010101010101d51b00a0502017303020
(II) RADEON(0): 26002115100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 475068696c6970734c43440a000000fe
(II) RADEON(0): 004c503135345730312d544c41320008
(II) RADEON(0): EDID vendor "LPL", prod id 0
(II) RADEON(0): EDID quirk: Detailed timings give sizes in cm.
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit d0000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Clock Scaling Disabled
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1280,1202)
(II) RADEON(0): Largest offscreen area available: 1280 x 6989
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x005de800
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x005e3800
(II) RADEON(0): Largest offscreen area available: 1280 x 6981
(II) RADEON(0): Detected Radeon Mobility X300, disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.5
_________________
Darkman |
|
| Back to top |
|
|
Apetrini
Veteran
Joined: 09 Feb 2005
Posts: 1158
|
| Posted: Thu Aug 13, 2009 12:41 pm Post subject: |
|
|
Mmmm che strano... non c'è nussuna segnalazione del display non trovato nei log...
Comunque qualcosuccia nei driver radeon di problematico c'è : | Code: | drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed |
Non so se è correlato, ma...
Ma hai l'accelerazione grafica? glxgears ti da almeno 1000 fps e glxinfo segnala il direct rendering attivo?
Forse ti manca il modulo drm (è nel kernel), se ne usi uno esterno(cosa sconsigliata) devi assicurarti la compatibilità col kernel attuale.
Non ho piu idee...
_________________
Linux ape 2.6.31-vanilla. Paludis since 0.28.0. |
|
| Back to top |
|
|
darkmanPPT
Veteran
Joined: 13 Apr 2006
Posts: 1069
Location: vi/bo
|
| Posted: Thu Aug 13, 2009 1:34 pm Post subject: |
|
|
Direct rendering YES
glxgears mi da 115 fps, ma a dir la verità non ho mai notato rallentamenti di grafica (e si che uso anche blender).
Non so quanto glxgears sia affidabile. cmq non noto problemi di lentezza nella grafica.
modulo drm.... uhm..... atch, già.. io uso un modulo esterno!
mo' me lo compilo dentro e tolgo quello esterno. 
_________________
Darkman |
|
| Back to top |
|
|
Apetrini
Veteran
Joined: 09 Feb 2005
Posts: 1158
|
| Posted: Thu Aug 13, 2009 1:55 pm Post subject: |
|
|
Ti ho chiesto a posta la velocità di glxgear poiché a volte glxinfo sfalsa.
115 fps vuol dire che è software rendered(nisba accelerazione 3d). Per darti un paragone una delle schede video intel piu marce di qualche anno fa riesce a farne almeno 800-900 di fps. La tua ad occhio e croce un 2000 fps dovrebbe farli senza problemi. La mia nvidia 7600 sotto kde 3.5 faceva 5000 e rotti.
_________________
Linux ape 2.6.31-vanilla. Paludis since 0.28.0. |
|
| Back to top |
|
|
darkmanPPT
Veteran
Joined: 13 Apr 2006
Posts: 1069
Location: vi/bo
|
| Posted: Thu Aug 13, 2009 2:50 pm Post subject: |
|
|
Ho risolto il problema da te sopra citato. (ho rifatto un nuovo kernel e ho messo build in i moduli DRM)
Il problema, però, non si è risolto.... 
però glxgears ora fa 1200fps c.a.  beh, se non altro ho risolto un'altro problema 
Io mi stavo chiedendo...
nel log di kdm c'è una riga che dice
| Code: | | (EE) Failed to load module "fbdev" (module does not exist, 0) |
che possa c'entrare? io ho provato ad emergere il pacchetto con fbdev, ma in tal caso xdm non parte più (ma nemmeno dopo 10 volte!!).
L'errore che mi viene segnalato dice che non riesce ad usare il framebuffer.
| Code: | Fatal server error:
Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices |
_________________
Darkman |
|
| Back to top |
|
|
darkmanPPT
Veteran
Joined: 13 Apr 2006
Posts: 1069
Location: vi/bo
|
| Posted: Tue Aug 25, 2009 9:27 am Post subject: |
|
|
Risolto!!
| Code: | | rc-update del clamd default |
ora non ho più problemi!
la domanda ora che mi si pone è come sia possibile che il demone di clamav vada ad interferire con il display...
la mia idea è che il caricamento del demone di clamav rallentasse il sistema non permettendo ad X di caricarsi in tempo.
boh, altre idee non ho
_________________
Darkman |
|
| Back to top |
|
|
Apetrini
Veteran
Joined: 09 Feb 2005
Posts: 1158
|
| Posted: Tue Aug 25, 2009 2:06 pm Post subject: |
|
|
| darkmanPPT wrote: |
la mia idea è che il caricamento del demone di clamav rallentasse il sistema non permettendo ad X di caricarsi in tempo.
|
Puo essere, magari saturava l'IO del sistema. L'importante che hai risolto, e per fortuna sei riuscito a farlo da solo, il problema era abbastanza rognoso da scovare per cui mediante forum non saremo mai riusciti ad andare in fondo alla faccenda.
_________________
Linux ape 2.6.31-vanilla. Paludis since 0.28.0. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
