Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[solved] Gentoo 2008.0 on Alpha 1200 - kernel panic
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures
View previous topic :: View next topic  
Author Message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Tue Apr 21, 2009 3:59 am    Post subject: [solved] Gentoo 2008.0 on Alpha 1200 - kernel panic Reply with quote

hi folks,

i m having kernel panic about the Mylex DAC960 during boot up

i boot in SRM by ">>>boot dka500 -fl 0"

i tried to "set console serial"
but i m not able to capture the kernel panic screen becoz the output is local to console physically T.T

any tricks to do that?
or what i should do next?

thanks
:oops:

btw...what i have in my minicom

Code:

P00>>>boot dka500 -fl 0
(boot dka500.5.0.1.1 -flags 0)
block 0 of dka500.5.0.1.1 is a valid boot block
reading 158 blocks from dka500.5.0.1.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 13c00
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak


Last edited by honeymak on Fri Apr 24, 2009 9:01 am; edited 2 times in total
Back to top
View user's profile Send private message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Tue Apr 21, 2009 4:54 am    Post subject: Reply with quote

some of the bg info for my hardware:

Alpha 1200 5/533 4MB
Digital Alpha 21164 Rev. 7.2 (1 Processor) EV56 Cached
Speed: 532 MHz
Cache: 4M
Mem: 256M

AlphaBIOS: 5.67 980818.1130
SRM: V5.3-1, 27-OCT-1998

HD: Mylex DAC960 RAID 5 26 G SCSI ID 8 SWXCR#0 (4 Members HD)

PCI:
Intel 82375 PCEB EISA
S3 Trio 32/64 VGA
Digital 21143 PB/C Ethernet
Mylex DAC960
NCRC810

EISA:
DEC6400
Floppy

SCSI:
1 Tape TLZ10
5 CD-ROM RRD47
_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak
Back to top
View user's profile Send private message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Tue Apr 21, 2009 7:05 am    Post subject: Reply with quote

i can use FreeBSD 6.4 disc 1 to boot my alpha

just by the same command in SRM (boot dka500)

any help?
:cry:
_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak
Back to top
View user's profile Send private message
bbgermany
Veteran
Veteran


Joined: 21 Feb 2005
Posts: 1437
Location: Oranienburg/Germany

PostPosted: Tue Apr 21, 2009 7:16 am    Post subject: Reply with quote

I had a similiar problem as i set up Gentoo on a DS20L. IIRC i attached a zero-modem cable to the serial console and connected it to my pc with minicom with the following command at the srm boot menu:

Code:

-flags "root=/dev/ram ramdisk_size=16384 console=ttyS0"


You could check this page, whether you will find some useful information, although its for debian ;)

http://www.debian.org/releases/stable/alpha/ch05s01.html.en

greets Stefan
_________________
1st: C2D 3GHz, 8GB, 2.25TB, HD4850
2nd: Celeron 2.6GHz, 2GB, 500GB, HD4350
3rd: TP X220, 2,5GHz, 8GB, 320GB, HD3000
4th: Athlon X2 BE-2300, 4GB, 64GB SSD + 3TB RAID5 GF7025
5th: Samung N350, 2GB, 250GB, HD3150
6th: Rasperry Pi, 512MB, 32GB SD
Back to top
View user's profile Send private message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Tue Apr 21, 2009 9:00 am    Post subject: Reply with quote

finally got my panic dumped

Code:

(boot dka500.5.0.1.1 -flags A)
�block 0 of dka500.5.0.1.1 is a valid boot block
reading 158 blocks from dka500.5.0.1.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 13c00
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
configuring I/O adapters...
  ncr0, hose 1, bus 0, slot 1
  floppy0, hose 0, bus 1, slot 0
  tulip0, hose 0, bus 0, slot 3
  dac0, hose 0, bus 0, slot 4
jumping to bootstrap code
aboot: Linux/Alpha SRM bootloader version 1.0_pre20040408
aboot: switching to OSF/1 PALcode version 1.21
aboot: booting from device 'SCSI 1 1 0 5 500 6000 11000'
aboot: no disklabel found.
iso: Max size:29727   Log zone size:2048
iso: First datazone:28   Root inode number 57344
aboot: could not find default config `A'
Welcome to aboot 1.0_pre20040408
Commands:
 h, ?                   Display this message
 q                      Halt the system and return to SRM
 p 1-8                  Look in partition <num> for configuration/kernel
 l                      List preconfigured kernels
 d <dir>                List directory <dir> in current filesystem
 b <file> <args>        Boot kernel in <file> (- for raw boot)
 i <file>               Use <file> as initial ramdisk
                        with arguments <args>
 0-9                    Boot preconfiguration 0-9 (list with 'l')
aboot> l
# Option 0, the default, boots /boot/alpha with the graphics console.
# Option 1 boots legacy, a kernel compiled with LEGACY_START_ADDR specified.
# This kernel is mainly for use with MILO, but should work on any system
# except the GS (Wildfire) series. Option 2 boots a kernel built
# specifically for the Jensen systems.
# If you want to use a console on a serial port, start aboot with "-flags x",
# then type l to list the kernel boot commands, and enter the one you want
# with the added option "console=ttyS#", where # is 0 or 1 for COM1 or COM2.
0:/boot/gentoo initrd=/boot/gentoo.igz root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squashfs cdroot
1:/boot/gentoo initrd=/boot/gentoo.igz root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squashfs console=t
tyS0 cdroot
aboot> 1
aboot: loading uncompressed /boot/gentoo...
aboot: loading compressed /boot/gentoo...
aboot: PHDR 0 vaddr 0xfffffc0000310000 offset 0x2000 size 0x71366e
aboot: bss at 0xfffffc0000a2366e, size 0x31c9a
aboot: zero-filling 203930 bytes at 0xfffffc0000a2366e
aboot: loading initrd (2900984 bytes/2832 blocks) at 0xfffffc000fb34000
aboot: starting kernel /boot/gentoo with arguments  root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squas
hfs console=ttyS0 cdroot
Linux version 2.6.24-gentoo-r6 (root@monolith) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Sun May 18 13:53:20 UTC 2008
Booting GENERIC on Rawhide variation Tincup using machine vector Rawhide from SRM
Major Options: SMP LEGACY_START VERBOSE_MCHECK MAGIC_SYSRQ
Command line:  root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squashfs console=ttyS0 cdroot
memcluster 0, usage 1, start        0, end      256
memcluster 1, usage 0, start      256, end    32767
memcluster 2, usage 1, start    32767, end    32768
freeing pages 256:384
freeing pages 1325:32767
reserving pages 1325:1326
Initial ramdisk at: 0xfffffc000fb34000 (2900984 bytes)
4096K Bcache detected; load hit latency 31 cycles, load miss latency 121 cycles
SMP: 1 CPUs probed -- cpu_present_map = 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32544
Kernel command line:  root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squashfs console=ttyS0 cdroot
mcpcia_init_hoses: found 2 hoses
PID hash table entries: 1024 (order: 10, 8192 bytes)
HWRPB cycle frequency bogus.  Estimated 532816735 Hz
Using epoch = 1952
Turning on RTC interrupts.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
Memory: 246600k/262136k available (5010k kernel code, 13160k reserved, 441k data, 400k init)
Mount-cache hash table entries: 512
SMP mode deactivated.
Brought up 1 CPUs
SMP: Total of 1 processors activated (945.13 BogoMIPS).
net_namespace: 120 bytes
NET: Registered protocol family 16
EISA bus registered
pci: enabling save/restore of SRM state
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 16384 bytes)
TCP established hash table entries: 8192 (order: 4, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 2832k freed
squashfs: version 3.3 (2007/10/31) Phillip Lougher
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
rtc: Digital UNIX epoch (1952) detected
Real Time Clock Driver v1.12ac
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
DAC960: ***** DAC960 RAID Driver Version 2.5.49 of 21 Aug 2007 *****
DAC960: Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
DAC960#0: While configuring DAC960 PCI RAID Controller at
DAC960#0: PCI Bus 0 Device 4 Function 0 I/O Address 0x8080 PCI Address 0x2259000
DAC960#0: FIRMWARE VERSION VERIFICATION FAILED - DETACHING
DAC960#0: Firmware Version = '2.42-0-00'
Unable to handle kernel paging request at virtual address 0000000000000608
CPU 0 swapper(1): Oops 0
pc = [<fffffc00007f2c7c>]  ra = [<fffffc00004aebfc>]  ps = 0000    Not tainted
pc is at mutex_lock+0xc/0x40
ra is at blk_cleanup_queue+0x2c/0x90
v0 = 0000000000000001  t0 = 0000000000000000  t1 = 0000000000000001
t2 = 0000000000000000  t3 = 000000000000000a  t4 = 0000000000000000
t5 = 0000000000000000  t6 = fffffc000e805a68  t7 = fffffc000f02c000
s0 = 0000000000000608  s1 = 0000000000000000  s2 = 0000000000000000
s3 = fffffc000f0dc000  s4 = fffffc000f0799a0  s5 = fffffc000f0dc049
s6 = fffffc000f079800
a0 = 0000000000000608  a1 = fffffc00004bdeb0  a2 = 0000000000000037
a3 = fffffc0000807bd8  a4 = 0000000000000001  a5 = 0000000000000000
t8 = 0000000000000000  t9 = fffffffffffffffc  t10= 0000000000000000
t11= fffffc000087fae1  pv = fffffc00007f2c70  at = 252e642500207865
gp = fffffc0000a1ff00  sp = fffffc000f02fba8
Trace:
[<fffffc0000541264>] DAC960_FinalizeController+0x74/0x500
[<fffffc0000546e34>] DAC960_Probe+0x1184/0x1190
[<fffffc00003f4dc4>] sysfs_create_link+0xf4/0x220
[<fffffc00004d8028>] pci_device_probe+0x88/0xc0
[<fffffc0000519450>] driver_sysfs_add+0x90/0xe0
[<fffffc00004bdf58>] kobject_get+0x28/0x50
[<fffffc0000514fb8>] get_device+0x28/0x40
[<fffffc00004d8014>] pci_device_probe+0x74/0xc0
[<fffffc0000540a80>] DAC960_P_InterruptHandler+0x0/0x410
[<fffffc0000519618>] driver_probe_device+0xa8/0x240
[<fffffc0000519c90>] __driver_attach+0xf0/0x190
[<fffffc00005180cc>] bus_for_each_dev+0x6c/0xc0
[<fffffc0000519ba0>] __driver_attach+0x0/0x190
[<fffffc00005193ac>] driver_attach+0x2c/0x40
[<fffffc0000518a5c>] bus_add_driver+0xdc/0x2d0
[<fffffc0000519e20>] driver_register+0x70/0xc0
[<fffffc00004d7bf0>] __pci_register_driver+0x70/0xe0
[<fffffc000053b970>] DAC960_init_module+0x30/0xb0
[<fffffc0000311448>] kernel_thread+0x28/0x90
[<fffffc0000311430>] kernel_thread+0x10/0x90

Code: c3e000a8  47ff041f  2ffe0000  27bb0023  23bdd290  60004000 <a8700000> 40603122
Kernel panic - not syncing: Attempted to kill init!


_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak
Back to top
View user's profile Send private message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Tue Apr 21, 2009 10:00 am    Post subject: Reply with quote

Code:

DAC960: ***** DAC960 RAID Driver Version 2.5.49 of 21 Aug 2007 *****
DAC960: Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
DAC960#0: While configuring DAC960 PCI RAID Controller at
DAC960#0: PCI Bus 0 Device 4 Function 0 I/O Address 0x8080 PCI Address 0x2259000
DAC960#0: FIRMWARE VERSION VERIFICATION FAILED - DETACHING
DAC960#0: Firmware Version = '2.42-0-00'
Unable to handle kernel paging request at virtual address 0000000000000608


will this be the main point that failed?
em......how do i confirm it's hardware problem or specify root= during bootup?
:cry:
_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak
Back to top
View user's profile Send private message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Tue Apr 21, 2009 10:05 am    Post subject: Reply with quote

my freebsd boot up screen: Mylex DAC960 labeled as mlx0 (the device itself), mlxd (the "space")......how this dev translate into linux? or is this helpful? :cry:

Code:

Memory: 262144 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x783f00+0x3a550 syms=[0x8+0x7aee0+0x8+0x666bf]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...               
Entering /boot/kernel/kernel at 0xfffffc0000356020...
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.4-RELEASE #0: Sun Nov 30 07:00:37 UTC 2008
    root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
AlphaServer 4100
AlphaServer 1200 5/533 4MB, 531MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4001a00020115
real memory  = 266330112 (253 MB)
avail memory = 245473280 (234 MB)
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, REGOPS_FUNC)
mcbus0: <MCBUS Backplane Bus>
pcib0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
pcib0: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2
pci0: <PCI bus> on pcib0
sym0: <810> port 0x1ffff00-0x1ffffff mem 0x7ffff00-0x7ffffff at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at IRQ 0x10 (vec 0xb40)
sym0: [GIANT-LOCKED]
pcib1: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 4
pcib1: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2
pci1: <PCI bus> on pcib1
eisab0: <PCI-EISA bridge> at device 1.0 on pci1
eisa0: <EISA bus> on eisab0
mainboard0: <DEC6400 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on eisab0
pci1: <display, VGA> at device 2.0 (no driver attached)
dc0: <Intel 21143 10/100BaseTX> port 0x1fffe00-0x1fffe7f mem 0x3fa7e00-0x3fa7e7f at device 3.0 on pci1
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:00:f8:1a:e4:1b
dc0: interrupting at IRQ 0x4 (vec 0x9c0)
mlx0: <Mylex version 2 RAID interface> port 0x1ffff00-0x1ffff7f mem 0x3fa7f00-0x3fa7f7f at device 4.0 on pci1
mlx0: interrupting at IRQ 0x8 (vec 0xa00)
mlx0: [GIANT-LOCKED]
mlx0: DAC960P/PD, 3 channels, firmware 2.42-0-00, 8MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 26034MB (53317632 sectors) RAID 5 (online)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: interrupting at ISA irq 14
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: interrupting at ISA irq 15
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 531914893 Hz quality 800
Timecounters tick every 0.833 msec
Waiting 5 seconds for SCSI devices to settle
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc0000b9fa00
sa0 at sym0 bus 0 target 1 lun 0
sa0: <DEC TLZ10    (C) DEC 04a8> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)

_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak
Back to top
View user's profile Send private message
mattst88
Developer
Developer


Joined: 28 Oct 2004
Posts: 362

PostPosted: Tue Apr 21, 2009 4:35 pm    Post subject: Reply with quote

The first thing I'd try is to update the SRM. The latest version is 6.0.

http://h18002.www1.hp.com/alphaserver/firmware/readmes/as1200.html
_________________
My 1U Dual 833 MHz Alphaserver DS20L
The AlphaLinux.org Wiki
Back to top
View user's profile Send private message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Tue Apr 21, 2009 6:08 pm    Post subject: Reply with quote

ok...great idea.....
but i have 2 questions

1. my thing is a DEC stuff....meaning it's old....this "hp" alpha is "new" or....em....the "old" stuff is still supported thru many yrs?
2. how can i check if the floppy drive still works properly before this update?...coz i don't want to ....."oops" in between for the floppy drive..... :wink:
_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak
Back to top
View user's profile Send private message
mattst88
Developer
Developer


Joined: 28 Oct 2004
Posts: 362

PostPosted: Tue Apr 21, 2009 10:53 pm    Post subject: Reply with quote

honeymak wrote:
ok...great idea.....
but i have 2 questions

1. my thing is a DEC stuff....meaning it's old....this "hp" alpha is "new" or....em....the "old" stuff is still supported thru many yrs?


Yes, the link I gave is really stuff that HP inherited, but it is correct for your system.

honeymak wrote:
2. how can i check if the floppy drive still works properly before this update?...coz i don't want to ....."oops" in between for the floppy drive..... :wink:


There's a firmware verify command in the update program, so you should be able to tell from that.
_________________
My 1U Dual 833 MHz Alphaserver DS20L
The AlphaLinux.org Wiki
Back to top
View user's profile Send private message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Wed Apr 22, 2009 5:02 am    Post subject: Reply with quote

still the same :cry:

Code:

UPD> lfu

          ***** Loadable Firmware Update Utility *****

Select firmware load device (cda0, dva0, ewa0), or
Press <return> to bypass loading and proceed to LFU:

------------------------------------------------------------------------------
 Function    Description
------------------------------------------------------------------------------
 Display     Displays the system's configuration table.
 Exit        Done exit LFU (reset).
 List        Lists the device, revision, firmware name, and update revision.
 Lfu         Restarts LFU.
 Readme      Lists important release information.
 Update      Replaces current firmware with loadable data image.
 Verify      Compares loadable and hardware images.
 ? or Help   Scrolls this function table.
------------------------------------------------------------------------------

UPD> list

Device         Current Revision    Filename            Update Revision
AlphaBIOS         V5.70-0          arcrom                 V5.70-0         
srmflash          V6.0-4           srmrom                 V6.0-4           
                                   cipca_fw             A420
                                   dfxaa_fw                3.20
                                   kzpsa_fw              A12

UPD> verify
AlphaBIOS       Verifying V5.70-0...  PASSED.
srmflash        Verifying V6.0-4...  PASSED.

UPD> display
                           Digital Equipment Corporation
                                 AlphaServer 1200

 Console V5.3-1  OpenVMS PALcode V1.19-18, Digital UNIX PALcode V1.21-26

 Module                          Type     Rev    Name 
 System Motherboard              0        0000   mthrbrd0
 Memory  256 MB DIMM             0        0000   mem0     
 CPU (4MB Cache)                 3        0003   cpu0     
 Bridge (IOD0/IOD1)              600      0032   iod0/iod1
 PCI Motherboard                 a        0000   saddle0 

 Bus 0  iod0 (PCI0)
 Slot   Option Name              Type     Rev    Name
 1      PCEB                     4828086  0015   pceb0   
 2      S3 Trio64/Trio32         88115333 0054   vga0     
 3      DE500-BA                 191011   0030   tulip0   
 4      Mylex DAC960             11069    0002   dac0     

 Bus 1  pceb0 (EISA Bridge connected to iod0, slot 1)
 Slot   Option Name              Type     Rev    Name

 Bus 0  iod1 (PCI1)
 Slot   Option Name              Type     Rev    Name
 1      NCR 53C810               11000    0002   ncr0     

UPD> exit   
Initializing...
 
 SROM V3.0 on cpu0
XSROM V6.0 on cpu0
BCache testing complete on cpu0
ERR! Supply #0 Failed
mem_pair0 -  256 MB
20..21..23..24..
Memory testing complete on cpu0
starting console on CPU 0
sizing memory
  0    256 MB DIMM
user-selected memory test set to partial
..probing IOD1 hose 1
  bus 0 slot 1 - NCR 53C810
probing IOD0 hose 0                                                     
  bus 0 slot 1 - PCEB                                                   
    probing EISA Bridge, bus 1                                           
  bus 0 slot 2 - S3 Trio64/Trio32                                       
  bus 0 slot 3 - DE500-BA                                               
  bus 0 slot 4 - Mylex DAC960
mouse test 4 failed
configuring I/O adapters...
  ncr0, hose 1, bus 0, slot 1
  floppy0, hose 0, bus 1, slot 0
  tulip0, hose 0, bus 0, slot 3
  dac0, hose 0, bus 0, slot 4
System temperature is 19 degrees C

Your system has previously experienced and logged a Temperature, Fan,
or Power environmental error event. Type SHOW POWER for more details.

AlphaServer 1200 Console V6.0-4, 10-MAY-2001 10:11:42

Power-up tests have detected a problem with your system!
Reset the system and observe the OCP display and/or type
SHOW CONFIG and SHOW POWER to obtain more information.


CPU 0 booting

(boot dka500.5.0.1.1 -flags A)
dka500.5.0.1.1 has no media present or is disabled via the RUN/STOP switch
dka500.5.0.1.1 has no media present or is disabled via the RUN/STOP switch
dka500.5.0.1.1 has no media present or is disabled via the RUN/STOP switch
P00>>>^C
P00>>>�^C
P00>>>boot dka500 -fl 1
(boot dka500.5.0.1.1 -flags 1)
block 0 of dka500.5.0.1.1 is a valid boot block
reading 158 blocks from dka500.5.0.1.1
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 13c00
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
aboot: Linux/Alpha SRM bootloader version 1.0_pre20040408
aboot: switching to OSF/1 PALcode version 1.23
aboot: booting from device 'SCSI 1 1 0 5 500 6000 11000'
aboot: no disklabel found.
iso: Max size:29727   Log zone size:2048
iso: First datazone:28   Root inode number 57344
aboot: loading uncompressed /boot/gentoo...
aboot: loading compressed /boot/gentoo...
aboot: PHDR 0 vaddr 0xfffffc0000310000 offset 0x2000 size 0x71366e
aboot: bss at 0xfffffc0000a2366e, size 0x31c9a
aboot: zero-filling 203930 bytes at 0xfffffc0000a2366e
aboot: loading initrd (2900984 bytes/2832 blocks) at 0xfffffc000fb34000
aboot: starting kernel /boot/gentoo with arguments  root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squat
Linux version 2.6.24-gentoo-r6 (root@monolith) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Sun May 18 13:53:20 UTC 2008
Booting GENERIC on Rawhide variation Tincup using machine vector Rawhide from SRM
Major Options: SMP LEGACY_START VERBOSE_MCHECK MAGIC_SYSRQ
Command line:  root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squashfs console=ttyS0 cdroot
memcluster 0, usage 1, start        0, end      256
memcluster 1, usage 0, start      256, end    32767
memcluster 2, usage 1, start    32767, end    32768
freeing pages 256:384
freeing pages 1325:32767
reserving pages 1325:1326
Initial ramdisk at: 0xfffffc000fb34000 (2900984 bytes)
4096K Bcache detected; load hit latency 31 cycles, load miss latency 121 cycles
SMP: 1 CPUs probed -- cpu_present_map = 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32544
Kernel command line:  root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squashfs console=ttyS0 cdroot
mcpcia_init_hoses: found 2 hoses
PID hash table entries: 1024 (order: 10, 8192 bytes)
HWRPB cycle frequency bogus.  Estimated 532816298 Hz
Using epoch = 1952
Turning on RTC interrupts.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
Memory: 246600k/262136k available (5010k kernel code, 13160k reserved, 441k data, 400k init)
Mount-cache hash table entries: 512
SMP mode deactivated.
Brought up 1 CPUs
SMP: Total of 1 processors activated (945.13 BogoMIPS).
net_namespace: 120 bytes
NET: Registered protocol family 16
EISA bus registered
pci: enabling save/restore of SRM state
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 16384 bytes)
TCP established hash table entries: 8192 (order: 4, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 2832k freed
squashfs: version 3.3 (2007/10/31) Phillip Lougher
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
rtc: Digital UNIX epoch (1952) detected
Real Time Clock Driver v1.12ac
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
DAC960: ***** DAC960 RAID Driver Version 2.5.49 of 21 Aug 2007 *****
DAC960: Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
DAC960#0: While configuring DAC960 PCI RAID Controller at
DAC960#0: PCI Bus 0 Device 4 Function 0 I/O Address 0x8080 PCI Address 0x2259000
DAC960#0: FIRMWARE VERSION VERIFICATION FAILED - DETACHING
DAC960#0: Firmware Version = '2.42-0-00'
Unable to handle kernel paging request at virtual address 0000000000000608
CPU 0 swapper(1): Oops 0
pc = [<fffffc00007f2c7c>]  ra = [<fffffc00004aebfc>]  ps = 0000    Not tainted
pc is at mutex_lock+0xc/0x40
ra is at blk_cleanup_queue+0x2c/0x90
v0 = 0000000000000001  t0 = 0000000000000000  t1 = 0000000000000001
t2 = 0000000000000000  t3 = 000000000000000a  t4 = 0000000000000000
t5 = 0000000000000000  t6 = fffffc000e805a68  t7 = fffffc000f02c000
s0 = 0000000000000608  s1 = 0000000000000000  s2 = 0000000000000000
s3 = fffffc000f0dc000  s4 = fffffc000f0799a0  s5 = fffffc000f0dc049
s6 = fffffc000f079800
a0 = 0000000000000608  a1 = fffffc00004bdeb0  a2 = 0000000000000037
a3 = fffffc0000807bd8  a4 = 0000000000000001  a5 = 0000000000000000
t8 = 0000000000000000  t9 = fffffffffffffffc  t10= 0000000000000000
t11= fffffc000087fae1  pv = fffffc00007f2c70  at = 252e642500207865
gp = fffffc0000a1ff00  sp = fffffc000f02fba8
Trace:
[<fffffc0000541264>] DAC960_FinalizeController+0x74/0x500
[<fffffc0000546e34>] DAC960_Probe+0x1184/0x1190
[<fffffc00003f4dc4>] sysfs_create_link+0xf4/0x220
[<fffffc00004d8028>] pci_device_probe+0x88/0xc0
[<fffffc0000519450>] driver_sysfs_add+0x90/0xe0
[<fffffc00004bdf58>] kobject_get+0x28/0x50
[<fffffc0000514fb8>] get_device+0x28/0x40
[<fffffc00004d8014>] pci_device_probe+0x74/0xc0
[<fffffc0000540a80>] DAC960_P_InterruptHandler+0x0/0x410
[<fffffc0000519618>] driver_probe_device+0xa8/0x240
[<fffffc0000519c90>] __driver_attach+0xf0/0x190
[<fffffc00005180cc>] bus_for_each_dev+0x6c/0xc0
[<fffffc0000519ba0>] __driver_attach+0x0/0x190
[<fffffc00005193ac>] driver_attach+0x2c/0x40
[<fffffc0000518a5c>] bus_add_driver+0xdc/0x2d0
[<fffffc0000519e20>] driver_register+0x70/0xc0
[<fffffc00004d7bf0>] __pci_register_driver+0x70/0xe0
[<fffffc000053b970>] DAC960_init_module+0x30/0xb0
[<fffffc0000311448>] kernel_thread+0x28/0x90
[<fffffc0000311430>] kernel_thread+0x10/0x90

Code: c3e000a8  47ff041f  2ffe0000  27bb0023  23bdd290  60004000 <a8700000> 40603122
Kernel panic - not syncing: Attempted to kill init!

_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak
Back to top
View user's profile Send private message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Fri Apr 24, 2009 3:51 am    Post subject: Reply with quote

lspci stuff from FreeBSD 6.4

Code:

root@lmakalpha /usr/ports/sysutils/pciutils# lspci
00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 02)
00:02.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54)
00:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)
00:04.0 RAID bus controller: Mylex Corporation DAC960P (rev 02)
root@lmakalpha /usr/ports/sysutils/pciutils# lspci -vv
00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 02)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 255
   Interrupt: pin A routed to IRQ 16
   Region 0: I/O ports at 1ffff00
   Region 1: Memory at 07ffff00 (32-bit, non-prefetchable)

00:02.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54) (prog-if 00 [VGA controller])
   Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 0
   Region 0: Memory at 04000000 (32-bit, non-prefetchable)
   Expansion ROM at 03fb0000 [disabled]

00:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)
   Subsystem: Digital Equipment Corporation DE500B Fast Ethernet
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 255 (5000ns min, 10000ns max)
   Interrupt: pin A routed to IRQ 4
   Region 0: I/O ports at 1fffe00
   Region 1: Memory at 03fa7e00 (32-bit, non-prefetchable)
   Expansion ROM at 03fc0000 [disabled]

00:04.0 RAID bus controller: Mylex Corporation DAC960P (rev 02)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 255 (1000ns min)
   Interrupt: pin A routed to IRQ 8
   Region 0: I/O ports at 1ffff00
   Region 1: Memory at 03fa7f00 (32-bit, non-prefetchable)
   Expansion ROM at 03fa8000 [disabled]

root@lmakalpha /usr/ports/sysutils/pciutils# lspci -v
00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 02)
   Flags: bus master, medium devsel, latency 255, IRQ 16
   I/O ports at 1ffff00
   Memory at 07ffff00 (32-bit, non-prefetchable)

00:02.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54) (prog-if 00 [VGA controller])
   Flags: medium devsel
   Memory at 04000000 (32-bit, non-prefetchable)
   Expansion ROM at 03fb0000 [disabled]

00:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)
   Subsystem: Digital Equipment Corporation DE500B Fast Ethernet
   Flags: bus master, medium devsel, latency 255, IRQ 4
   I/O ports at 1fffe00
   Memory at 03fa7e00 (32-bit, non-prefetchable)
   Expansion ROM at 03fc0000 [disabled]

00:04.0 RAID bus controller: Mylex Corporation DAC960P (rev 02)
   Flags: bus master, medium devsel, latency 255, IRQ 8
   I/O ports at 1ffff00
   Memory at 03fa7f00 (32-bit, non-prefetchable)
   Expansion ROM at 03fa8000 [disabled]

root@lmakalpha /usr/ports/sysutils/pciutils#

_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak
Back to top
View user's profile Send private message
honeymak
Guru
Guru


Joined: 30 Dec 2002
Posts: 456

PostPosted: Fri Apr 24, 2009 9:01 am    Post subject: Reply with quote

solved by upgrading my Mylex firmware to 2.7

installing gentoo now.........hope to have some good news later........ :wink:
_________________
hackers - make sth real
academics - read sth said to be real
http://facebook.com/honey.mak
Back to top
View user's profile Send private message
mattst88
Developer
Developer


Joined: 28 Oct 2004
Posts: 362

PostPosted: Fri Apr 24, 2009 9:27 pm    Post subject: Reply with quote

honeymak wrote:
solved by upgrading my Mylex firmware to 2.7

installing gentoo now.........hope to have some good news later........ :wink:


Ahh, good to know.
_________________
My 1U Dual 833 MHz Alphaserver DS20L
The AlphaLinux.org Wiki
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum