vezzo n00b
Joined: 31 Oct 2007 Posts: 27
|
Posted: Mon Apr 06, 2009 8:27 am Post subject: GPS-logger iblue 747 e /dev/ttyUSB mancante |
|
|
Salve a tutti ho un piccolo problema con questo gps logger che contiene un convertitore usb seriale cp2101
io carico il modulo cp2101 e collego il logger, ma non mi crea il device ttyUSB0, non so che pesci pigliare.
L'output di dmesg é:
Code: | USB Serial support registered for cp2101
usbcore: registered new interface driver cp2101
cp2101: v0.07:Silicon Labs CP2101/CP2102 RS232 serial adaptor driver
hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0020
ehci_hcd 0000:00:10.4: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
hub 5-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:10.4: port 5 full speed --> companion
ehci_hcd 0000:00:10.4: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
usb usb3: wakeup_rh (auto-start)
hub 5-0:1.0: port 5 not reset yet, waiting 50ms
ehci_hcd 0000:00:10.4: GetStatus port 5 status 003802 POWER OWNER sig=j CSC
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:10.2: port 1 portsc 0093,00
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 3-1: new full speed USB device using uhci_hcd and address 4
usb 3-1: default language 0x0409
usb 3-1: New USB device found, idVendor=0e8d, idProduct=3329
usb 3-1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
usb 3-1: Product: GPS Receiver
usb 3-1: Manufacturer: MTK
usb 3-1: uevent
usb 3-1: usb_probe_device
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usbserial_generic 3-1:1.0: usb_probe_interface
usbserial_generic 3-1:1.0: usb_probe_interface - got id
usb 3-1: adding 3-1:1.1 (config #1, interface 1)
usb 3-1:1.1: uevent
usbserial_generic 3-1:1.1: usb_probe_interface
usbserial_generic 3-1:1.1: usb_probe_interface - got id
drivers/usb/core/inode.c: creating file '004'
hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0020 |
qualcuno mi può aiutare, o almeno indirizzare verso una soluzione???
P.S. ho provato anche ad aggiungere due regole alle regole di udev usate da gpsd:
Code: | SYSFS{idVendor}=="0e8d", SYSFS{idProduct}=="3329", SUBSYSTEM=="tty", ACTION=="add", KERNEL=="ttyUSB[0-9]*", SYMLINK="gps%n", RUN+="/etc/hotplug/usb/gpsd.hotplug add $root/%k"
SYSFS{idVendor}=="0e8d", SYSFS{idProduct}=="3329", SUBSYSTEM=="tty", ACTION=="remove", KERNEL=="ttyUSB[0-9]*", RUN+="/etc/hotplug/usb/gpsd.hotplug remove $root/%k" |
ma anche qui nulla da fare |
|