Gentoo Forums :: View topic - [Fresh Ebuild] vdr-freeboxtv-0.0.3.ebuild (NEW)

[Fresh Ebuild] vdr-freeboxtv-0.0.3.ebuild (NEW)

View unanswered posts
View posts from last 24 hours

Gentoo Forums Forum Index

French

View previous topic :: View next topic

Author

Message

dragOon
n00b
n00b

Joined: 30 May 2008
Posts: 19
Location: Europe, Paris

Posted: Sat May 31, 2008 1:49 pm Post subject: [Fresh Ebuild] vdr-freeboxtv-0.0.3.ebuild (NEW)

Slt à tous,

Je porte beaucoup d'intérêt à VDR, logiciel permettant la réception DVB-S, C, T et IPTV. Je tourne avec une carte Skystar2 sans souçi, je souhaiterais maintenant mettre au point cet Ebuild vdr-freeboxtv-0.0.3.ebuild, de sorte que tous les freenautes Gentooïstes puissent en profiter !

J'ai un souçi avec la librairie Live à la compilation .. Je cherche de l'aide pour terminer sa mise au point !

Fichier Install-Fr du package vdr-freeboxtv-0.0.3.tar.bz2 :

Code:

Installation :
==============

Ce module a été développé et seulement testé sur les versions 1.4.x de VDR. Cependant, il devrait fonctionner sur des versions plus anciennes (non garanti mais à essayer...).

1- Comme dit plus haut, la bibliothèque liveMedia est obligatoire et doit d'abord être installée correctement sur votre système. Si vous la construisez à partir du code source, faites attention à l'endroit où vous placez les différents fichiers. Le makefile fourni dans l'archive tar FreeboxTv suppose que les fichiers et répertoires d'include de la bibliothèque sont sous /usr/include (chemin par défaut si elle est installée directement par le gestionnaire de paquets de votre distribution). Si par exemple vous avez compilé puis installé la biliothèque sous /usr/local, vous devrez adapter le Makefile du module FreeboxTv en conséquence (variable INCLUDES).

2- Comme tout autre module VDR, dépliez l'archive tar dans le répertoire <VOTRE_REPERTOIRE_VDR>/PLUGINS/src. Créez ensuite un lien symbolique freeboxtv pointant sur ce répertoire.

3- Placez-vous dans le répertoire d'accueil des sources VDR :
<VOTRE_REPERTOIRE_VDR>
Créez ou éditez (selon le cas) le fichier Make.config puis ajoutez-y les lignes suivantes :
LIBS += -L/usr/local/lib/liveMedia \
-lBasicUsageEnvironment -lgroupsock -lliveMedia -lUsageEnvironment

Là-encore, vous devez faire attention à l'endroit où vous avez installé les bibliothèques que vous avez construites à partir des sources. Selon le cas, vous aurez peut-être besoin de modifier la directive -L ci-dessus pour être conforme à votre configuration.

3bis - Si vous ne souhaitez pas utiliser la fonctionnalité EPG (activée par défaut), commentez dans le fichier Makefile du plugin la ligne suivante puis passez directement à l'étape 4 :
FREEBOXTV_EPG = 1

Dans le cas contraire, ajoutez les déclarations suivantes à la ligne LIBS du fichier Make.config dans le répertoire d'accueil des sources VDR (même ligne qu'à l'étape 3 ci-dessus) :
-lglibmm-2.4 -lxml2 -lxml++-2.6

Comme précédemment et selon votre configuration, vous pouvez avoir à adapter la directive -L ou modifier les numéros de version dans les noms des bibliothèques en question.

4- Ensuite :
make plugins
make
Puis installez comme d'habitude les fichiers nouvellement générés.

Fichier Ebuild en dévellopement - vdr-freeboxtv-0.0.3.ebuild :

Code:

# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/media-plugins/vdr-freeboxtv/vdr-freeboxtv-0.0.3.tar.bz2

RESTRICT="mirror strip"

inherit vdr-plugin

DESCRIPTION="VDR FreeBoxTV Plugin:"
HOMEPAGE="http://vdr.bluox.org/wiki/index.php/Freeboxtv-plugin"
SRC_URI="http://www.panczyk.eu/vdr/${P}.tar.bz2
http://vdr.bluox.org/download/vdr-freeboxtv/${P}.tar.bz2"

SLOT="0"
LICENSE="GPL-2"
KEYWORDS="~amd64 ~x86"

IUSE="xmltv"

DEPEND=">=media-video/vdr-1.4.6
>=media-plugins/live-2008.02.08
xmltv? ( >=dev-libs/glib-2.14 )
xmltv? ( >=dev-cpp/glibmm-2.14 )
xmltv? ( >=dev-libs/libxml2-2.6.0 )
xmltv? ( >=media-tv/xmltv-0.5.50 )"

pkg_setup() {
vdr-plugin_pkg_setup
}

src_unpack() {
vdr-plugin_src_unpack
}

Résultat de la compilation :

Code:

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild N ] media-plugins/vdr-freeboxtv-0.0.3 USE="-xmltv" 0 kB [1]

Total: 1 package (1 new), Size of downloads: 0 kB
Portage tree and overlays:
[0] /usr/portage
[1] /usr/local/portage

>>> Verifying ebuild Manifests...

>>> Emerging (1 of 1) media-plugins/vdr-freeboxtv-0.0.3 to /
* vdr-freeboxtv-0.0.3.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking vdr-freeboxtv-0.0.3.tar.bz2 ;-) ... [ ok ]
* Compiling against
* vdr-1.6.0-1 [API version 1.6.0]
>>> Unpacking source...
>>> Unpacking vdr-freeboxtv-0.0.3.tar.bz2 to /var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/work
* Patching Makefile
* Setting Pathes ... [ ok ]
* VDR has gettext support
* Auto converting translations to gettext ...
* Conversion to gettext failed. Plugin needs fixing. [ !! ]
*
* Plugin will have only english OSD texts
* it needs manual fixing.
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/work/freeboxtv-0.0.3 ...
make: *** No rule to make target `liveMedia.hh', needed by `freeboxtv.o'. Stop.
*
* ERROR: media-plugins/vdr-freeboxtv-0.0.3 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 2561: Called vdr-plugin_src_compile
* environment, line 3236: Called vdr-plugin_src_compile 'src_compile' 'src_compile'
* environment, line 3252: Called die
* The specific snippet of code:
* emake ${BUILD_PARAMS} ${VDRPLUGIN_MAKE_TARGET:-all} LOCALEDIR="${TMP_LOCALE_DIR}" LIBDIR="${S}" TMPDIR="${T}" || die "emake failed"
* The die message:
* emake failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/temp/environment'.
* This ebuild is from an overlay: '/usr/local/portage/'
*

* Messages for package media-plugins/vdr-freeboxtv-0.0.3:

* Conversion to gettext failed. Plugin needs fixing.
*
* Plugin will have only english OSD texts
* it needs manual fixing.
*
* ERROR: media-plugins/vdr-freeboxtv-0.0.3 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 2561: Called vdr-plugin_src_compile
* environment, line 3236: Called vdr-plugin_src_compile 'src_compile' 'src_compile'
* environment, line 3252: Called die
* The specific snippet of code:
* emake ${BUILD_PARAMS} ${VDRPLUGIN_MAKE_TARGET:-all} LOCALEDIR="${TMP_LOCALE_DIR}" LIBDIR="${S}" TMPDIR="${T}" || die "emake failed"
* The die message:
* emake failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/temp/environment'.
* This ebuild is from an overlay: '/usr/local/portage/'

J'ai donc modifier dans un premier temps le fichier /usr/include/vdr/Make.config tel que décrit plus haut, et recompiler, sans succès, arff !

Fichier /usr/include/vdr/Make.config modifié :

Code:

#
# Generated by ebuild vdr-1.6.0_p1-r1
#
PREFIX = /usr
DVBDIR = /usr/include
PLUGINLIBDIR = /usr/lib64/vdr/plugins
CONFDIR = /etc/vdr
VIDEODIR = /var/vdr/video
LOCDIR = $(PREFIX)/share/vdr/locale

DEFINES += -DCONFDIR=\"$(CONFDIR)\"
INCLUDES += -I$(DVBDIR)
## Modifier ceçi sans résultat :
LIBS += -L/usr/include/liveMedia \
-lBasicUsageEnvironment -lgroupsock -lliveMedia -lUsageEnvironment
##
PLUGINMISSING = 1
CHANNELSCAN = 1
DVBPLAYER = 1
DVBSETUP = 1
IPTV = 1
MENUORG = 1
LIVEBUFFER = 1
YAEPG = 1
VOLCTRL = 1
LIRCSETTINGS = 1

ifdef ANALOGTV
DEFINES += -DUSE_ANALOGTV
endif

ifdef ATSC
DEFINES += -DUSE_ATSC
endif

ifdef CHANNELSCAN
DEFINES += -DUSE_CHANNELSCAN
endif

ifdef CMDSUBMENU
DEFINES += -DUSE_CMDSUBMENU
endif

.....

Fichier Makefile de vdr-freeboxtv-0.0.3.tar.bz2

Code:

#
# Makefile for a Video Disk Recorder plugin
#
# $Id$

# The official name of this plugin.
# This name will be used in the '-P...' option of VDR to load the plugin.
# By default the main source file also carries this name.
# IPORTANT: the presence of this macro is important for the Make.config
# file. So it must be defined, even if it is not used here!
#
PLUGIN = freeboxtv

### The version number of this plugin (taken from the main source file):

VERSION = $(shell grep 'static const char \*VERSION *=' $(PLUGIN).c | awk '{ print $$6 }' | sed -e 's/[";]//g')

### The C++ compiler and options:

CXX ?= g++
CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual

### The directory environment:

VDRDIR = ../../..
LIBDIR = ../../lib
TMPDIR = /tmp

### Allow user defined options to overwrite defaults:

-include $(VDRDIR)/Make.config

### The version number of VDR's plugin API (taken from VDR's "config.h"):

APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"$.*$".*$$/\1/p' $(VDRDIR)/config.h)

### The name of the distribution archive:

ARCHIVE = $(PLUGIN)-$(VERSION)
PACKAGE = vdr-$(ARCHIVE)

### Comment out the following line if you intend NOT to use the EPG feature for FreeboxTv plugin
FREEBOXTV_EPG = 1

### Includes and Defines (add further entries here):

INCLUDES += -I$(VDRDIR)/include \
   -I/home/odj/dev/vdr/liveMedia/liveMedia/include \
   -I/home/odj/dev/vdr/liveMedia/groupsock/include \
   -I/home/odj/dev/vdr/liveMedia/BasicUsageEnvironment/include \
   -I/home/odj/dev/vdr/liveMedia/UsageEnvironment/include

ifdef FREEBOXTV_EPG
INCLUDES += -I/usr/include/libxml++-2.6 -I/usr/include/glibmm-2.4 \
   -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include \
   -I/usr/lib/glibmm-2.4/include
endif

DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
ifdef FREEBOXTV_EPG
DEFINES += -DFREEBOXTV_EPG
endif

### The object files (add further files here):

OBJS = $(PLUGIN).o freeboxRTSPClient.o
ifdef FREEBOXTV_EPG
OBJS += freeboxEPG.o
endif

### Implicit rules:

%.o: %.c
$(CXX) $(CXXFLAGS) -c $(DEFINES) $(INCLUDES) $<

# Dependencies:

MAKEDEP = $(CXX) -MM -MG
DEPFILE = .dependencies
$(DEPFILE): Makefile
@$(MAKEDEP) $(DEFINES) $(INCLUDES) $(OBJS:%.o=%.c) > $@

-include $(DEPFILE)

### Targets:

all: libvdr-$(PLUGIN).so

libvdr-$(PLUGIN).so: $(OBJS)
$(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@
@cp --remove-destination $@ $(LIBDIR)/$@.$(APIVERSION)

dist: clean
@-rm -rf $(TMPDIR)/$(ARCHIVE)
@mkdir $(TMPDIR)/$(ARCHIVE)
@cp -a * $(TMPDIR)/$(ARCHIVE)
@tar czf $(PACKAGE).tgz -C $(TMPDIR) $(ARCHIVE)
@-rm -rf $(TMPDIR)/$(ARCHIVE)
@echo Distribution package created as $(PACKAGE).tgz

clean:
@-rm -f $(OBJS) $(DEPFILE) *.so *.tgz core* *~

Objectif :

La librairie live est installé sous /usr/include/liveMedia/liveMedia.hh ...
Je souhaiterais modifier l'ebuild, où plutôt le Make.config tel que décrit dans install-fr ...
Ou je devrais peut être modifier le Makefile des sources pour définir l'emplacement de la librairie liveMedia ss gentoo ?

Code:

# whereis liveMedia
liveMedia: /usr/include/liveMedia

Si quelqu'un à une idée ?

Last edited by dragOon on Tue Jun 03, 2008 11:19 pm; edited 2 times in total

mark_alec
Bodhisattva

Joined: 11 Sep 2004
Posts: 6066
Location: Melbourne, Australia

Posted: Sat May 31, 2008 1:59 pm Post subject:

Moved from Portage & Programming to French. _________________ www.gentoo.org.au \|\| #gentoo-au

dragOon
n00b
n00b

Joined: 30 May 2008
Posts: 19
Location: Europe, Paris

Posted: Tue Jun 03, 2008 7:27 pm Post subject:

D'abord il faut modifier le Makefile qui est incohérent avec Gentoo :

Code:

diff -urN freeboxtv-0.0.3.orig/Makefile freeboxtv-0.0.3/Makefile
--- freeboxtv-0.0.3.orig/Makefile 2007-09-11 18:16:10.000000000 +0200
+++ freeboxtv-0.0.3/Makefile 2008-06-03 22:00:25.000000000 +0200
@@ -44,11 +44,10 @@

### Includes and Defines (add further entries here):

-INCLUDES += -I$(VDRDIR)/include \
- -I/home/odj/dev/vdr/liveMedia/liveMedia/include \
- -I/home/odj/dev/vdr/liveMedia/groupsock/include \
- -I/home/odj/dev/vdr/liveMedia/BasicUsageEnvironment/include \
- -I/home/odj/dev/vdr/liveMedia/UsageEnvironment/include
+INCLUDES += -I$(VDRDIR)/include -I/usr/include/liveMedia \
+ -I/usr/include/groupsock \
+ -I/usr/include/BasicUsageEnvironment \
+ -I/usr/include/UsageEnvironment

ifdef FREEBOXTV_EPG
INCLUDES += -I/usr/include/libxml++-2.6 -I/usr/include/glibmm-2.4 \

vdr-freeboxtv-0.0.3.ebuild dans sa version 1, avec le patch correctif pour liveMedia :

Disponible à http://pingwho/pub/gentoo/ftp/portage/overlay/media-plugins/vdr-freeboxtv/

Code:

# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/media-plugins/vdr-freeboxtv/vdr-freeboxtv-0.0.3.tar.bz2

RESTRICT="mirror strip"

inherit vdr-plugin

DESCRIPTION="VDR FreeBoxTV Plugin:"
HOMEPAGE="http://vdr.bluox.org/wiki/index.php/Freeboxtv-plugin"
SRC_URI="http://www.panczyk.eu/vdr/${P}.tar.bz2
http://vdr.bluox.org/download/vdr-freeboxtv/${P}.tar.bz2"

SLOT="0"
LICENSE="GPL-2"
KEYWORDS="~amd64 ~x86"

IUSE="xmltv"

DEPEND=">=media-video/vdr-1.4.6
>=media-plugins/live-2008.02.08
xmltv? ( >=dev-libs/glib-2.14 )
xmltv? ( >=dev-cpp/glibmm-2.14 )
xmltv? ( >=dev-libs/libxml2-2.6.0 )
xmltv? ( >=media-tv/xmltv-0.5.50 )"

PATCHES="${FILESDIR}/${P}-gentoo.diff"

src_unpack()
{
vdr-plugin_src_unpack
}

src_install()
{
vdr-plugin_src_install
}

pkg_postinst()
{
vdr-plugin_pkg_postinst
elog "Please try with channels.conf.freebox files"
elog "Look at INSTALL and README files for instructions"
}

Code:

dbox2 media-plugins # emerge -v vdr-freeboxtv

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R ] media-plugins/vdr-freeboxtv-0.0.3 USE="-xmltv" 24 kB [1]

Total: 1 package (1 reinstall), Size of downloads: 24 kB
Portage tree and overlays:
[0] /usr/portage
[1] /usr/local/portage

>>> Verifying ebuild Manifests...

>>> Emerging (1 of 1) media-plugins/vdr-freeboxtv-0.0.3 to /
>>> Downloading 'http://www.panczyk.eu/vdr/vdr-freeboxtv-0.0.3.tar.bz2'
--2008-06-04 01:14:31-- http://www.panczyk.eu/vdr/vdr-freeboxtv-0.0.3.tar.bz2
Resolving www.panczyk.eu... 81.169.145.71
Connecting to www.panczyk.eu|81.169.145.71|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 24348 (24K) [application/x-tar]
Saving to: `/usr/portage/distfiles/vdr-freeboxtv-0.0.3.tar.bz2'

100%[=====================================>] 24,348 --.-K/s in 0.1s

2008-06-04 01:14:31 (237 KB/s) - `/usr/portage/distfiles/vdr-freeboxtv-0.0.3.tar.bz2' saved [24348/24348]

* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking vdr-freeboxtv-0.0.3.tar.bz2 ;-) ... [ ok ]
* Compiling against
* vdr-1.6.0-1 [API version 1.6.0]
>>> Unpacking source...
>>> Unpacking vdr-freeboxtv-0.0.3.tar.bz2 to /var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/work
* Applying vdr-freeboxtv-0.0.3-gentoo.diff ... [ ok ]
* Patching Makefile
* Setting Pathes ... [ ok ]
* VDR has gettext support
* Auto converting translations to gettext ...
* Conversion to gettext failed. Plugin needs fixing. [ !! ]
*
* Plugin will have only english OSD texts
* it needs manual fixing.
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/work/freeboxtv-0.0.3 ...
g++ -march=nocona -O3 -pipe -fomit-frame-pointer -fPIC -c -DCONFDIR=\"/etc/vdr\" -DUSE_CHANNELSCAN -DUSE_DVBPLAYER -DUSE_DVBSETUP -DUSE_IPTV -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_MENUORG -DUSE_PLUGINMISSING -DUSE_VOLCTRL -DUSE_YAEPG -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"freeboxtv"' -DFREEBOXTV_EPG -I/usr/include -I/usr/include -I/usr/include/liveMedia -I/usr/include/groupsock -I/usr/include/BasicUsageEnvironment -I/usr/include/UsageEnvironment -I/usr/include/libxml++-2.6 -I/usr/include/glibmm-2.4 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/glibmm-2.4/include freeboxtv.c
g++ -march=nocona -O3 -pipe -fomit-frame-pointer -fPIC -c -DCONFDIR=\"/etc/vdr\" -DUSE_CHANNELSCAN -DUSE_DVBPLAYER -DUSE_DVBSETUP -DUSE_IPTV -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_MENUORG -DUSE_PLUGINMISSING -DUSE_VOLCTRL -DUSE_YAEPG -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"freeboxtv"' -DFREEBOXTV_EPG -I/usr/include -I/usr/include -I/usr/include/liveMedia -I/usr/include/groupsock -I/usr/include/BasicUsageEnvironment -I/usr/include/UsageEnvironment -I/usr/include/libxml++-2.6 -I/usr/include/glibmm-2.4 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/glibmm-2.4/include freeboxRTSPClient.c
g++ -march=nocona -O3 -pipe -fomit-frame-pointer -fPIC -c -DCONFDIR=\"/etc/vdr\" -DUSE_CHANNELSCAN -DUSE_DVBPLAYER -DUSE_DVBSETUP -DUSE_IPTV -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_MENUORG -DUSE_PLUGINMISSING -DUSE_VOLCTRL -DUSE_YAEPG -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"freeboxtv"' -DFREEBOXTV_EPG -I/usr/include -I/usr/include -I/usr/include/liveMedia -I/usr/include/groupsock -I/usr/include/BasicUsageEnvironment -I/usr/include/UsageEnvironment -I/usr/include/libxml++-2.6 -I/usr/include/glibmm-2.4 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/glibmm-2.4/include freeboxEPG.c
g++ -march=nocona -O3 -pipe -fomit-frame-pointer -fPIC -shared freeboxtv.o freeboxRTSPClient.o freeboxEPG.o -o libvdr-freeboxtv.so
>>> Source compiled.
>>> Test phase [not enabled]: media-plugins/vdr-freeboxtv-0.0.3

>>> Install vdr-freeboxtv-0.0.3 into /var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/image/ category media-plugins
>>> Completed installing vdr-freeboxtv-0.0.3 into /var/tmp/portage/media-plugins/vdr-freeboxtv-0.0.3/image/

* checking 5 files for package collisions
>>> Merging media-plugins/vdr-freeboxtv-0.0.3 to /
--- /usr/
--- /usr/lib64/
--- /usr/lib64/vdr/
--- /usr/lib64/vdr/checksums/
>>> /usr/lib64/vdr/checksums/header-md5-vdr-freeboxtv
--- /usr/lib64/vdr/plugins/
>>> /usr/lib64/vdr/plugins/libvdr-freeboxtv.so.1.6.0
--- /usr/share/
--- /usr/share/doc/
--- /usr/share/doc/vdr-freeboxtv-0.0.3/
>>> /usr/share/doc/vdr-freeboxtv-0.0.3/HISTORY.bz2
>>> /usr/share/doc/vdr-freeboxtv-0.0.3/README.bz2
--- /usr/share/vdr/
--- /usr/share/vdr/vdrplugin-rebuild/
>>> /usr/share/vdr/vdrplugin-rebuild/media-plugins-vdr-freeboxtv-0.0.3
>>> Safely unmerging already-installed instance...
No package files given... Grabbing a set.
--- replaced obj /usr/share/vdr/vdrplugin-rebuild/media-plugins-vdr-freeboxtv-0.0.3
--- replaced dir /usr/share/vdr/vdrplugin-rebuild
--- replaced dir /usr/share/vdr
--- replaced obj /usr/share/doc/vdr-freeboxtv-0.0.3/README.bz2
--- replaced obj /usr/share/doc/vdr-freeboxtv-0.0.3/HISTORY.bz2
--- replaced dir /usr/share/doc/vdr-freeboxtv-0.0.3
--- replaced dir /usr/share/doc
--- replaced dir /usr/share
--- replaced obj /usr/lib64/vdr/plugins/libvdr-freeboxtv.so.1.6.0
--- replaced dir /usr/lib64/vdr/plugins
--- replaced obj /usr/lib64/vdr/checksums/header-md5-vdr-freeboxtv
--- replaced dir /usr/lib64/vdr/checksums
--- replaced dir /usr/lib64/vdr
--- replaced dir /usr/lib64
--- replaced dir /usr
>>> Original instance of package unmerged safely.
*
* To activate this vdr-plugin execute the following command:
* eselect vdr-plugin enable freeboxtv
*
* Please try with channels.conf.freebox files
* Look at INSTALL and README files for instructions
>>> media-plugins/vdr-freeboxtv-0.0.3 merged.

>>> No packages selected for removal by clean
>>> Auto-cleaning packages...

>>> No outdated packages were found on your system.

* Messages for package media-plugins/vdr-freeboxtv-0.0.3:

* Conversion to gettext failed. Plugin needs fixing.
*
* Plugin will have only english OSD texts
* it needs manual fixing.
*
* To activate this vdr-plugin execute the following command:
* eselect vdr-plugin enable freeboxtv
*
* Please try with channels.conf.freebox files
* Look at INSTALL and README files for instructions
* GNU info directory index is up-to-date.
dbox2 media-plugins #

Merçi rom@lsdark, chub[w]@gentoo-vdr et aux autres qui se sont fait attendrent ! :lol:

Pour la suite, on verra demain ..!

:!:

Display posts from previous:

	Gentoo Forums Forum Index French	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2024 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy