View previous topic :: View next topic |
Author |
Message |
sephiroth2 n00b
Joined: 17 Apr 2008 Posts: 53
|
Posted: Thu Apr 17, 2008 9:10 pm Post subject: [fglrx] Pas d'accélération 3D |
|
|
Bonsoir,
je vous expose mon problème en espérant trouver une solution ici !
Alors voilà, je suis sous Gentoo donc avec un kernel 2.6.23.
J'ai un ordinateur Dell Inspiron 1501, tout marche très bien sauf l'accélération 3D (je dispose d'une carte graphique ATI Xpress 1150).
J'ai installé le paquet "x11-drivers/ati-drivers" version 8.471.3 mais celà ne marche toujours pas.
Avant j'avais le 8.455.2-r1 mais je n'avais toujours pas d'accélération 3D.
Je me retrouve avec le même message d'erreur dans mon dmesg :
Code: | [fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.42.3 [Oct 19 2007] on minor 0
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[fglrx:firegl_init_pcie] *ERROR* Invalid GART type 0.
Clocksource tsc unstable (delta = -150026880 ns)
|
J'ai essayé de chercher à quoi ça correpondrait, mais je n'ai vraisembablement rien trouvé.
Je précise que je suis avec un xorg-server en version 1.4.0.90-r3 et de xorg-x11 en version 7.3 !
En vous remerciant d'avance ! |
|
Back to top |
|
|
nokernel n00b
Joined: 19 Jul 2004 Posts: 18 Location: Québec
|
Posted: Fri Apr 18, 2008 12:10 am Post subject: |
|
|
Est-ce que ton kernel à le module agpgart de chargé?
Je crois que tu dois utilise le agpgart qui provient de ton driver, donc ne par charger le agpgart du kernel. |
|
Back to top |
|
|
SlashRhumSlashNeisson Apprentice
Joined: 30 Dec 2006 Posts: 201 Location: Lille
|
Posted: Fri Apr 18, 2008 4:33 am Post subject: |
|
|
+1 nokernel
Code: | grep AGP /usr/src/linux/.config |
Code: |
CONFIG_AGP=m
CONFIG_AGP_ATI=m
|
Ensuite dans ton /etc/modules.autoload.d/kernel-2.6 tu ajoutes
Code: |
fglrx
ati-agp
agpgart |
_________________ Gentoo only |
|
Back to top |
|
|
sephiroth2 n00b
Joined: 17 Apr 2008 Posts: 53
|
Posted: Fri Apr 18, 2008 2:34 pm Post subject: |
|
|
Merci pour toutes ces reponses, mais je ne serais pas chez moi avant une ou 2 semaines donc je testerai en ce temps la !
Merci encore |
|
Back to top |
|
|
nokernel n00b
Joined: 19 Jul 2004 Posts: 18 Location: Québec
|
Posted: Sat Apr 19, 2008 2:36 am Post subject: |
|
|
SlashRhumSlashNeisson wrote: | +1 nokernel
Code: | grep AGP /usr/src/linux/.config |
Code: |
CONFIG_AGP=m
CONFIG_AGP_ATI=m
|
Ensuite dans ton /etc/modules.autoload.d/kernel-2.6 tu ajoutes
Code: |
fglrx
ati-agp
agpgart |
|
Merci pour les détails, je veux bien aider, mais j'ai tendance à être avard des petits détails. |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
Posted: Sun Apr 20, 2008 1:29 am Post subject: |
|
|
sephiroth2 wrote: | Merci pour toutes ces reponses, mais je ne serais pas chez moi avant une ou 2 semaines donc je testerai en ce temps la !
Merci encore |
Utilise le driver libre dès que possible, fglrx capucpalibreetcapu _________________ Mon MediaWiki perso : http://pix-mania.dyndns.org |
|
Back to top |
|
|
sephiroth2 n00b
Joined: 17 Apr 2008 Posts: 53
|
Posted: Mon Apr 21, 2008 7:43 pm Post subject: |
|
|
Il n'y a pas l'acceleration 3D avec xorg-server en version 1.4 et xorg-x11 en version 7.3 avec le driver libre radeon |
|
Back to top |
|
|
kwenspc Advocate
Joined: 21 Sep 2003 Posts: 4954
|
Posted: Mon Apr 21, 2008 8:08 pm Post subject: |
|
|
Hum ça c'est normal oui, radeon c'est de 7200 à x800 je crois. Pour les cartes plus récentes faut le driver radeonHD, mais lui non plus n'a pas encore la 3D (ils planchent justement dessus). _________________ membre officieux du SAV Ati GEntoo |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
Posted: Mon Apr 21, 2008 10:03 pm Post subject: |
|
|
kwenspc wrote: | Hum ça c'est normal oui, radeon c'est de 7200 à x800 je crois. Pour les cartes plus récentes faut le driver radeonHD, mais lui non plus n'a pas encore la 3D (ils planchent justement dessus). |
très juste
http://radeonhd.org
_________________ Mon MediaWiki perso : http://pix-mania.dyndns.org |
|
Back to top |
|
|
sephiroth2 n00b
Joined: 17 Apr 2008 Posts: 53
|
Posted: Mon Apr 28, 2008 5:49 pm Post subject: |
|
|
Code: | sephiroth@dell ~ $ grep AGP /usr/src/linux/.config
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=m
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
|
Donc c'est bon !
Mais j'ai toujours ce problème
Code: | [fglrx:firegl_init_pcie] *ERROR* Invalid GART type 0. |
J'ai donc aussi mis comme dit dans /etc/modules.autoload.d/kernel-2.6:
Code: | fglrx
ati-agp
agpgart |
Je mets aussi mon xorg.conf au cas où:
Code: | Section "ServerLayout"
Identifier "Main Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "USB Mouse" "SendCoreEvents"
EndSection
Section "Files"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/default"
FontPath "/usr/share/fonts/dejavu"
FontPath "/usr/share/fonts/ttf-bitstream-vera"
EndSection
Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
Load "ddc"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap"
Load "record"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "ServerFlags"
# Option "AIGLX" "false"
Option "AIGLX" "true"
Option "blank time" "10" # 10 minutes
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "XAANoOffscreenPixmaps" "true"
Option "VideoOverlay" "on"
Option "TexturedXrender" "true"
EndSection
Section "Device"
Identifier "vesa"
Driver "vesa"
EndSection
Section "Device"
Identifier "radeon"
Driver "radeon"
Option "RenderAccel" "true"
Option "DRI" "true"
Option "MergedDPI" "96 96"
Option "XAANoOffscreenPixmaps" "true"
Option "HWCursor" "true"
Option "ColorTiling" "on"
# Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
# Option "GARTSize" "64"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
# Device "radeon"
# Device "vesa"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
ViewPort 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
### fglrx
Option "Composite" "enable"
# Option "Composite" "disable"
### Driver libre
# Option "Composite" "enable"
# Option "RENDER" "enable"
###
EndSection |
Je voulais aussi dire que avec le kernel 2.6.24 j'ai le direct rendering, mais j'aimerais savoir pourquoi il n'est pas sous le 2.6.23
Et dans le Xorg.0.log je trouve ceci:(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
Code: |
(II) fglrx(0): Acceleration enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Direct rendering disabled
|
Et aussi:
Code: | cat /var/log/Xorg.0.log | grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension MIT-SCREEN-SAVER
(EE) fglrx(0): [pcie] Failed to gather memory of size 262144Kb for PCIe. Error (-1007)
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
|
Merci de votre aide |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
|
Back to top |
|
|
julroy67 Apprentice
Joined: 03 Feb 2007 Posts: 209 Location: Alsace >> /dev/null
|
|
Back to top |
|
|
sephiroth2 n00b
Joined: 17 Apr 2008 Posts: 53
|
Posted: Tue Apr 29, 2008 7:19 pm Post subject: |
|
|
C'est encore moi !
Après désinstallation de fglrx et mis radeon ben ça marche
Donc je le garde, parcontre je remarque que la 3D rame plus qu'avant quand je l'utilisais !
Mais dans le log de Xorg.0.log, voici ce que je trouve:
Code: | (EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/r300_dri.so: undefined symbol: __driCreateNewScreen_20050727) |
Je ne sais pas à quoi correspond cette erreur !
De plus, je veux réemerger mesa-9999 sauf que je me prends une erreur au milieu de la compilation:
Code: | dri2.c:38:38: erreur: X11/extensions/dri2proto.h : Aucun fichier ou répertoire de ce type
dri2.c:43: erreur: ‘DRI2_NAME’ undeclared here (not in a function)
dri2.c: In function ‘DRI2QueryVersion’:
dri2.c:81: erreur: ‘xDRI2QueryVersionReply’ undeclared (first use in this function)
dri2.c:81: erreur: (Each undeclared identifier is reported only once
dri2.c:81: erreur: for each function it appears in.)
dri2.c:81: erreur: expected ‘;’ before ‘rep’
dri2.c:82: erreur: ‘xDRI2QueryVersionReq’ undeclared (first use in this function)
dri2.c:82: erreur: ‘req’ undeclared (first use in this function)
dri2.c:82: erreur: opérandes invalides pour le binaire *
dri2.c:87: erreur: ‘sz_xDRI2QueryVersionReq’ undeclared (first use in this function)
dri2.c:87: erreur: opérandes invalides pour le binaire +
dri2.c:87: erreur: expected expression before ‘)’ token
dri2.c:87: erreur: opérandes invalides pour le binaire *
dri2.c:87: erreur: called object ‘<erroneous-expression>’ is not a function
dri2.c:87: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:87: erreur: ‘X_DRI2QueryVersion’ undeclared (first use in this function)
dri2.c:87: erreur: request for member ‘length’ in something not a structure or union
dri2.c:87: erreur: opérandes invalides pour le binaire +
dri2.c:87: erreur: utilisation invalide d'un tableau n'étant pas membre gauche
dri2.c:88: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:89: erreur: request for member ‘dri2ReqType’ in something not a structure or union
dri2.c:90: erreur: request for member ‘majorVersion’ in something not a structure or union
dri2.c:90: erreur: ‘DRI2_MAJOR’ undeclared (first use in this function)
dri2.c:91: erreur: request for member ‘minorVersion’ in something not a structure or union
dri2.c:91: erreur: ‘DRI2_MINOR’ undeclared (first use in this function)
dri2.c:92: erreur: ‘rep’ undeclared (first use in this function)
dri2.c:97: erreur: request for member ‘majorVersion’ in something not a structure or union
dri2.c:97: attention : assignment makes integer from pointer without a cast
dri2.c:98: erreur: request for member ‘minorVersion’ in something not a structure or union
dri2.c:98: attention : assignment makes integer from pointer without a cast
dri2.c: In function ‘DRI2Connect’:
dri2.c:109: erreur: ‘xDRI2ConnectReply’ undeclared (first use in this function)
dri2.c:109: erreur: expected ‘;’ before ‘rep’
dri2.c:110: erreur: ‘xDRI2ConnectReq’ undeclared (first use in this function)
dri2.c:110: erreur: ‘req’ undeclared (first use in this function)
dri2.c:110: erreur: opérandes invalides pour le binaire *
dri2.c:115: erreur: ‘sz_xDRI2ConnectReq’ undeclared (first use in this function)
dri2.c:115: erreur: opérandes invalides pour le binaire +
dri2.c:115: erreur: expected expression before ‘)’ token
dri2.c:115: erreur: opérandes invalides pour le binaire *
dri2.c:115: erreur: called object ‘<erroneous-expression>’ is not a function
dri2.c:115: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:115: erreur: ‘X_DRI2Connect’ undeclared (first use in this function)
dri2.c:115: erreur: request for member ‘length’ in something not a structure or union
dri2.c:115: erreur: opérandes invalides pour le binaire +
dri2.c:115: erreur: utilisation invalide d'un tableau n'étant pas membre gauche
dri2.c:116: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:117: erreur: request for member ‘dri2ReqType’ in something not a structure or union
dri2.c:118: erreur: request for member ‘screen’ in something not a structure or union
dri2.c:119: erreur: ‘rep’ undeclared (first use in this function)
dri2.c:125: erreur: request for member ‘sareaHandle’ in something not a structure or union
dri2.c:125: attention : assignment makes integer from pointer without a cast
dri2.c:127: erreur: request for member ‘driverNameLength’ in something not a structure or union
dri2.c:127: attention : passing argument 1 of ‘malloc’ makes integer from pointer without a cast
dri2.c:130: erreur: request for member ‘driverNameLength’ in something not a structure or union
dri2.c:130: erreur: opérandes invalides pour le binaire &
dri2.c:131: erreur: request for member ‘busIdLength’ in something not a structure or union
dri2.c:131: erreur: opérandes invalides pour le binaire &
dri2.c:131: erreur: opérandes invalides pour le binaire +
dri2.c:131: attention : passing argument 2 of ‘_XEatData’ makes integer from pointer without a cast
dri2.c:136: erreur: request for member ‘driverNameLength’ in something not a structure or union
dri2.c:136: attention : passing argument 3 of ‘_XReadPad’ makes integer from pointer without a cast
dri2.c:137: erreur: request for member ‘driverNameLength’ in something not a structure or union
dri2.c:137: erreur: l'indice du tableau n'est pas un entier
dri2.c:139: erreur: request for member ‘busIdLength’ in something not a structure or union
dri2.c:139: attention : passing argument 1 of ‘malloc’ makes integer from pointer without a cast
dri2.c:142: erreur: request for member ‘busIdLength’ in something not a structure or union
dri2.c:142: erreur: opérandes invalides pour le binaire &
dri2.c:142: attention : passing argument 2 of ‘_XEatData’ makes integer from pointer without a cast
dri2.c:147: erreur: request for member ‘busIdLength’ in something not a structure or union
dri2.c:147: attention : passing argument 3 of ‘_XReadPad’ makes integer from pointer without a cast
dri2.c:148: erreur: request for member ‘busIdLength’ in something not a structure or union
dri2.c:148: erreur: l'indice du tableau n'est pas un entier
dri2.c:153: erreur: request for member ‘sareaHandle’ in something not a structure or union
dri2.c: In function ‘DRI2AuthConnection’:
dri2.c:159: erreur: ‘xDRI2AuthConnectionReq’ undeclared (first use in this function)
dri2.c:159: erreur: ‘req’ undeclared (first use in this function)
dri2.c:159: erreur: opérandes invalides pour le binaire *
dri2.c:160: erreur: ‘xDRI2AuthConnectionReply’ undeclared (first use in this function)
dri2.c:160: erreur: expected ‘;’ before ‘rep’
dri2.c:165: erreur: ‘sz_xDRI2AuthConnectionReq’ undeclared (first use in this function)
dri2.c:165: erreur: opérandes invalides pour le binaire +
dri2.c:165: erreur: expected expression before ‘)’ token
dri2.c:165: erreur: opérandes invalides pour le binaire *
dri2.c:165: erreur: called object ‘<erroneous-expression>’ is not a function
dri2.c:165: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:165: erreur: ‘X_DRI2AuthConnection’ undeclared (first use in this function)
dri2.c:165: erreur: request for member ‘length’ in something not a structure or union
dri2.c:165: erreur: opérandes invalides pour le binaire +
dri2.c:165: erreur: utilisation invalide d'un tableau n'étant pas membre gauche
dri2.c:166: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:167: erreur: request for member ‘dri2ReqType’ in something not a structure or union
dri2.c:168: erreur: request for member ‘screen’ in something not a structure or union
dri2.c:169: erreur: request for member ‘magic’ in something not a structure or union
dri2.c:170: erreur: ‘rep’ undeclared (first use in this function)
dri2.c:170: erreur: request for member ‘authenticated’ in something not a structure or union
dri2.c:179: erreur: request for member ‘authenticated’ in something not a structure or union
dri2.c:179: attention : return makes integer from pointer without a cast
dri2.c: In function ‘DRI2CreateDrawable’:
dri2.c:186: erreur: ‘xDRI2CreateDrawableReply’ undeclared (first use in this function)
dri2.c:186: erreur: expected ‘;’ before ‘rep’
dri2.c:187: erreur: ‘xDRI2CreateDrawableReq’ undeclared (first use in this function)
dri2.c:187: erreur: ‘req’ undeclared (first use in this function)
dri2.c:187: erreur: opérandes invalides pour le binaire *
dri2.c:192: erreur: ‘sz_xDRI2CreateDrawableReq’ undeclared (first use in this function)
dri2.c:192: erreur: opérandes invalides pour le binaire +
dri2.c:192: erreur: expected expression before ‘)’ token
dri2.c:192: erreur: opérandes invalides pour le binaire *
dri2.c:192: erreur: called object ‘<erroneous-expression>’ is not a function
dri2.c:192: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:192: erreur: ‘X_DRI2CreateDrawable’ undeclared (first use in this function)
dri2.c:192: erreur: request for member ‘length’ in something not a structure or union
dri2.c:192: erreur: opérandes invalides pour le binaire +
dri2.c:192: erreur: utilisation invalide d'un tableau n'étant pas membre gauche
dri2.c:193: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:194: erreur: request for member ‘dri2ReqType’ in something not a structure or union
dri2.c:195: erreur: request for member ‘drawable’ in something not a structure or union
dri2.c:196: erreur: ‘rep’ undeclared (first use in this function)
dri2.c:204: erreur: request for member ‘handle’ in something not a structure or union
dri2.c:204: attention : assignment makes integer from pointer without a cast
dri2.c:205: erreur: request for member ‘head’ in something not a structure or union
dri2.c:205: attention : assignment makes integer from pointer without a cast
dri2.c: In function ‘DRI2DestroyDrawable’:
dri2.c:213: erreur: ‘xDRI2DestroyDrawableReq’ undeclared (first use in this function)
dri2.c:213: erreur: ‘req’ undeclared (first use in this function)
dri2.c:213: erreur: opérandes invalides pour le binaire *
dri2.c:220: erreur: ‘sz_xDRI2DestroyDrawableReq’ undeclared (first use in this function)
dri2.c:220: erreur: opérandes invalides pour le binaire +
dri2.c:220: erreur: expected expression before ‘)’ token
dri2.c:220: erreur: opérandes invalides pour le binaire *
dri2.c:220: erreur: called object ‘<erroneous-expression>’ is not a function
dri2.c:220: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:220: erreur: ‘X_DRI2DestroyDrawable’ undeclared (first use in this function)
dri2.c:220: erreur: request for member ‘length’ in something not a structure or union
dri2.c:220: erreur: opérandes invalides pour le binaire +
dri2.c:220: erreur: utilisation invalide d'un tableau n'étant pas membre gauche
dri2.c:221: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:222: erreur: request for member ‘dri2ReqType’ in something not a structure or union
dri2.c:223: erreur: request for member ‘drawable’ in something not a structure or union
dri2.c: In function ‘DRI2ReemitDrawableInfo’:
dri2.c:231: erreur: ‘xDRI2ReemitDrawableInfoReply’ undeclared (first use in this function)
dri2.c:231: erreur: expected ‘;’ before ‘rep’
dri2.c:232: erreur: ‘xDRI2ReemitDrawableInfoReq’ undeclared (first use in this function)
dri2.c:232: erreur: ‘req’ undeclared (first use in this function)
dri2.c:232: erreur: opérandes invalides pour le binaire *
dri2.c:237: erreur: ‘sz_xDRI2ReemitDrawableInfoReq’ undeclared (first use in this function)
dri2.c:237: erreur: opérandes invalides pour le binaire +
dri2.c:237: erreur: expected expression before ‘)’ token
dri2.c:237: erreur: opérandes invalides pour le binaire *
dri2.c:237: erreur: called object ‘<erroneous-expression>’ is not a function
dri2.c:237: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:237: erreur: ‘X_DRI2ReemitDrawableInfo’ undeclared (first use in this function)
dri2.c:237: erreur: request for member ‘length’ in something not a structure or union
dri2.c:237: erreur: opérandes invalides pour le binaire +
dri2.c:237: erreur: utilisation invalide d'un tableau n'étant pas membre gauche
dri2.c:238: erreur: request for member ‘reqType’ in something not a structure or union
dri2.c:239: erreur: request for member ‘dri2ReqType’ in something not a structure or union
dri2.c:240: erreur: request for member ‘drawable’ in something not a structure or union
dri2.c:241: erreur: ‘rep’ undeclared (first use in this function)
dri2.c:249: erreur: request for member ‘head’ in something not a structure or union
dri2.c:249: attention : assignment makes integer from pointer without a cast
make[3]: *** [dri2.o] Erreur 1
make[3]: quittant le répertoire « /var/tmp/portage/media-libs/mesa-9999/work/mesa-9999/src/glx/x11 »
make[2]: *** [subdirs] Erreur 1
make[2]: quittant le répertoire « /var/tmp/portage/media-libs/mesa-9999/work/mesa-9999/src »
make[1]: *** [default] Erreur 1
make[1]: quittant le répertoire « /var/tmp/portage/media-libs/mesa-9999/work/mesa-9999 »
make: *** [linux-dri-x86] Erreur 2
*
* ERROR: media-libs/mesa-9999 failed.
* Call stack:
* ebuild.sh, line 1701: Called dyn_compile
* ebuild.sh, line 1039: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* mesa-9999.ebuild, line 243: Called die
* The specific snippet of code:
* emake -j1 ${CONFIG} || die "Build failed"
* The die message:
* Build failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/media-libs/mesa-9999/temp/build.log'.
*
* Messages for package media-libs/mesa-9999:
*
* ERROR: media-libs/mesa-9999 failed.
* Call stack:
* ebuild.sh, line 1701: Called dyn_compile
* ebuild.sh, line 1039: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* mesa-9999.ebuild, line 243: Called die
* The specific snippet of code:
* emake -j1 ${CONFIG} || die "Build failed"
* The die message:
* Build failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/media-libs/mesa-9999/temp/build.log'.
*
|
Malgrès un direct rendering: Yes
Si vous pouvez m'aider, ce serait avec plaisir !
Merci |
|
Back to top |
|
|
kwenspc Advocate
Joined: 21 Sep 2003 Posts: 4954
|
Posted: Tue Apr 29, 2008 7:26 pm Post subject: |
|
|
D'où tu sors mesa-9999 toi? Ce serais pas un ebuild venant d'un overlay? vérifies que tu utilises bien l'arbre portage officiel et pas des overlays à côté. _________________ membre officieux du SAV Ati GEntoo |
|
Back to top |
|
|
sephiroth2 n00b
Joined: 17 Apr 2008 Posts: 53
|
Posted: Tue Apr 29, 2008 7:35 pm Post subject: |
|
|
J'utilise un overlay en effet |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
|
Back to top |
|
|
kwenspc Advocate
Joined: 21 Sep 2003 Posts: 4954
|
Posted: Tue Apr 29, 2008 7:45 pm Post subject: |
|
|
Eh bah cherches pas l'erreur alors... l'ebuild est totalement instable (ainsi que le source qu'il tente d'installer)
(et la compile n'a rien à voir avec le fait d'avoir le DRI ou non) _________________ membre officieux du SAV Ati GEntoo |
|
Back to top |
|
|
sephiroth2 n00b
Joined: 17 Apr 2008 Posts: 53
|
|
Back to top |
|
|
|