View previous topic :: View next topic |
Author |
Message |
lermit Tux's lil' helper
Joined: 14 Oct 2005 Posts: 141
|
Posted: Sat Apr 26, 2008 12:26 am Post subject: [RESEAU] problème d'installation 4965AGN[ |
|
|
Bonjour,
l'essai d'installer ma carte wifi intégré à mon portable (VIAO VGN-FZ21Z). elle fonctionne correctement sous windows et avent de passa a Gentoo, j'avais UBUNTU et elle fonctionnait correctement.
la carte réseau est une [url=Intel® Wireless WiFi Link 4965AGN]Intel® Wireless WiFi Link 4965AGN[/url]
le kernel qui est actuellement installer est le 2.6.24-r4 (gentoo-source)
lspci
Code: | 00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0425 (rev a1)
[b][color=blue]06:00.0 Network controller: Intel Corporation Unknown device 4229 (rev 61)[/color][/b]
08:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 16)
09:03.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
09:03.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
09:03.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) |
pour faire fonctionner la carte avec les kernels égale ou supérieur à 2.6.24(comme il est notée ici), il suffis de configuré le le kernel.
comment dans se tuto http://netsuke.wordpress.com/2008/03/08/gentoo-and-sony-vaio-vgn-fz180e-part-4-wireless/
Code: | Networking ---> Wireless --->
-*- Improved wireless configuration API
[*] nl80211 new netlink interface support
-*- Wireless extensions
<*> Generic IEEE 802.11 Networking Stack (mac80211)
[ ] Enable debugging output
< > Generic IEEE 802.11 Networking Stack
Device Drivers ---> [*] Network device support —> Wireless LAN —> [*] Wireless LAN (IEEE 802.11)
[*] Intel Wireless WiFi Link Drivers
[*] Enable full debugging output in iwlwifi drivers
[*] Enable Sensitivity Calibration in iwlwifi drivers
[*] Enable Spectrum Measurement in iwlwifi drivers
[*] Enable Wireless QoS in iwlwifi drivers
<M> Intel Wireless WiFi 4965AGN
|
mais dans le make menuconfig de mon installation je ne trouve pas je ne trouve pas le "Generic IEEE 802.11 Networking Stack (mac80211)" et "Intel Wireless WiFi Link Drivers"
si je essai d'installer iwlwifi, il veut m'installer les source du kernel sys-kernel/gentoo-sources-2.6.23-r9 (comme ici
Code: | emerge -va iwlwifi
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild NS ] sys-kernel/gentoo-sources-2.6.23-r9 USE="symlink -build" 44,707 kB
[ebuild N ] net-wireless/iwl3945-ucode-2.14.1.5 65 kB
[ebuild N ] net-wireless/iwl4965-ucode-4.44.1.20 79 kB
[ebuild N ] net-wireless/iwlwifi-1.2.23 USE="-ipw3945 -ipw4965" 355 kB
|
si je patch le kernel manuellement (comme dans ce tuto)
ceux-ci entraine que je ne peut plus compilé mon kernel. il me donne une erreur.
serait-il pour quoi ne vois la dans le make menuconfig les option a coché?
que dois je faire pour installer ma carte wifi?
merci d'avance pour votre aide
Lermit |
|
Back to top |
|
|
nemo13 Veteran
Joined: 08 Oct 2004 Posts: 1016 Location: France/Istres
|
Posted: Sat Apr 26, 2008 2:14 pm Post subject: |
|
|
Bonjour,
Tu as peut-être oublier d'activé au préalable :
Code: | Networking --->
[*] Networking support
Wireless --->
{M} Improved wireless configuration API
[*] nl80211 new netlink interface support
-*- Wireless extensions
<M> Generic IEEE 802.11 Networking Stack (mac80211)
<M> Generic IEEE 802.11 Networking Stack
<M> IEEE 802.11 WEP encryption (802.1x)
<M> IEEE 802.11i CCMP support
<M> IEEE 802.11i TKIP encryption |
J' y ajoute aussi dans la même section Code: | <M> RF switch subsystem support --->
--- RF switch subsystem support
<M> Input layer to RF switch connector |
n'oublies pas la partie crypto en touche finale.
A+ |
|
Back to top |
|
|
lermit Tux's lil' helper
Joined: 14 Oct 2005 Posts: 141
|
Posted: Sat Apr 26, 2008 2:59 pm Post subject: |
|
|
ok,
je regarde sa soir et je vous tien au courant |
|
Back to top |
|
|
lermit Tux's lil' helper
Joined: 14 Oct 2005 Posts: 141
|
Posted: Sun May 04, 2008 11:24 am Post subject: |
|
|
bonjour,
excusé-moi de ma réponse tardive mais j'ai d'autre problème entre temps.
pour les éléments a compilé dans le moyeau, maintenant c'est ok
j'avais oublié de coché
Code: | Code maturity level options --->
x Prompt for development and/or incomplete code/drivers, EXPERIMENTAL=Y |
maintenant j'ai des problème de ma carte wifi
Code: | # /etc/init.d/net.wlan0 restart * Stopping wlan0
* Bringing down wlan0
* Shutting down wlan0 ... [ ok ]
* Stopping wpa_cli on wlan0 ... [ ok ]
* Stopping wpa_supplicant on wlan0 ... [ ok ]
* Starting wlan0
* Wireless radio has been killed for interface wlan0
* wpa_supplicant will launch, but not associate until
* wireles radio is re-enabled for interface wlan0
* Starting wpa_supplicant on wlan0 ...
Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' dr iver 'wext' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_suppli cant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
Line: 7 - start of a new network block
ssid - hexdump_ascii(len=5):
57 6f 72 6c 64 World
key_mgmt: 0x4
wep_key0 - hexdump(len=13): [REMOVED]
wep_tx_keyidx=0 (0x0)
Priority group 0
id=0 ssid='World'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:13:e8:85:79:71
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Setting scan request: 0 sec 100000 usec
Added interface wlan0
Daemonize.. [ ok ]
* Starting wpa_cli on wlan0 ... [ ok ]
* Backgrounding ...
|
if ne veut pas configuré mon SSID dans le carte wifi
Code: | # iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
sit0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=off
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0 |
quand je fais un iwlist scan, voici se qu'il me donne
Quote: | # iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
sit0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 No scan results |
voici mon/etc/wpa_supplicant/wpa_supplicant.conf
Code: | network={
ssid="World"
key_mgmt=NONE
wep_key0=XXXXXXXXXXXXXXXXXXXXXXXXXX
wep_tx_keyidx=0
}
|
et mon /etc/conf.d/net
Code: | dns_domain_lo="theforce"
modules=( "dhcpcd" )
config_eth0=( "dhcp" )
dhcp_eth0="release"
config_wlan0=("dhcp")
modules=( "wpa_supplicant" )
wpa_supplicant_wlan0="-Dwext -iwlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf -dd" |
voici aussi le log
Code: |
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.17kds
iwl4965: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:06:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
PM: Adding info for No Bus:0000:06:00.0
PM: Removing info for No Bus:0000:06:00.0
iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
PM: Adding info for No Bus:phy0
PM: Adding info for No Bus:wmaster0
phy0: Selected rate control algorithm 'iwl-4965-rs'
PM: Adding info for No Bus:wlan0
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:16:e3:2e:b9:f7
wlan0: authenticate with AP 00:16:e3:2e:b9:f7
wlan0: RX authentication from 00:16:e3:2e:b9:f7 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:16:e3:2e:b9:f7
wlan0: RX AssocResp from 00:16:e3:2e:b9:f7 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:16:e3:2e:b9:f7)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
eth0: no IPv6 routers present
wlan0: no IPv6 routers present
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
eth0: no IPv6 routers present
|
je ne comprend pas pour quoi sa ne fonctionne pas?
quelqu'un aurai une idée?
merci d'avance |
|
Back to top |
|
|
nemo13 Veteran
Joined: 08 Oct 2004 Posts: 1016 Location: France/Istres
|
Posted: Mon May 05, 2008 9:26 am Post subject: |
|
|
lermit wrote: | Code: |
wlan0: associate with AP 00:16:e3:2e:b9:f7
wlan0: RX AssocResp from 00:16:e3:2e:b9:f7 (capab=0x411 status=0 aid=1)
wlan0: associated
eth0: no IPv6 routers present
|
je ne comprend pas pour quoi sa ne fonctionne pas?
quelqu'un aurai une idée?
merci d'avance |
Bonjour,
A priori tu es associé ; c'est en Ip que ton routeur te boude.
A vue de pif ,Il doit être IP4 alors que ton noyau doit être IP v6
A+
Edit: quoique le nessage est sur eth0 |
|
Back to top |
|
|
lermit Tux's lil' helper
Joined: 14 Oct 2005 Posts: 141
|
Posted: Mon May 05, 2008 11:28 am Post subject: |
|
|
bonjour,
se me semble étrange se que tu me dit.
- car le wifi dans le iwconfig me signale non configurée ainsi que le ifconfig (pas IP)
car je pense avant configurée l'IP, il doit configurer l'interface
- l'IPV4 est bien installé dans mon noyau car ma carte Eth0 fonctionne correctement (en DHCP et en statique) |
|
Back to top |
|
|
lermit Tux's lil' helper
Joined: 14 Oct 2005 Posts: 141
|
Posted: Wed May 07, 2008 12:52 pm Post subject: |
|
|
personne aurai une petite idée pour faire fonctionné correctement ma car wifi? |
|
Back to top |
|
|
d2_racing Bodhisattva
Joined: 25 Apr 2005 Posts: 13047 Location: Ste-Foy,Canada
|
|
Back to top |
|
|
lermit Tux's lil' helper
Joined: 14 Oct 2005 Posts: 141
|
Posted: Thu May 08, 2008 6:54 pm Post subject: |
|
|
ok merci,
je regarde sa des que j'ai un peut le temps (très certainement demain dans le début d'aprem)
je vous tien au courent se que sa donne |
|
Back to top |
|
|
lermit Tux's lil' helper
Joined: 14 Oct 2005 Posts: 141
|
Posted: Fri May 09, 2008 2:47 pm Post subject: |
|
|
j'ai gardé un parti de la configuration du kernel comme dans ce tuto est j'ai pris une autre parti du tuto que vous m'avez donnée
se qui me donne
Code: | Networking ---> Wireless --->
-*- Improved wireless configuration API
[*] nl80211 new netlink interface support
-*- Wireless extensions
<*> Generic IEEE 802.11 Networking Stack (mac80211)
[ ] Enable debugging output
< > Generic IEEE 802.11 Networking Stack
Device Drivers ---> [*] Network device support —> Wireless LAN —> [*] Wireless LAN (IEEE 802.11)
[*] Intel Wireless WiFi Link Drivers
[*] Enable full debugging output in iwlwifi drivers
[*] Enable Sensitivity Calibration in iwlwifi drivers
[*] Enable Spectrum Measurement in iwlwifi drivers
[*] Enable Wireless QoS in iwlwifi drivers
<M> Intel Wireless WiFi 4965AGN |
avec
Code: | (*) Cryptographic algorithm manager
(M) SHA1 digest algorithm
(M) SHA256 digest algorithm
(M) ECB support
(M) CBC support
(M) PCBC support
(*) AES cipher algorithms
(*) AES cipher algorithms (i586)
(*) ARC4 cipher algorithm
(*) Michael MIC keyed digest algorithm
|
apres le reboot, j'ai effactué un ifconfig wlan0 up.
le iwlist scan me donne ceux ci
Code: | lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
sit0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:02:CF:5A:43:56
ESSID:"perlico"
Mode:Master
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=28/100 Signal level=-92 dBm Noise level=-127 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Extra:tsf=0000003908c64f15
Cell 02 - Address: 00:11:50:3D:A4:97
ESSID:"cristinet"
Mode:Master
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=30/100 Signal level=-91 dBm Noise level=-127 dBm
Encryption key:on
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:tsf=0000003fae5a99d0
Cell 03 - Address: 00:16:E3:2E:B9:F7
ESSID:"World"
Mode:Master
Channel:13
Frequency:2.472 GHz (Channel 13)
Quality=100/100 Signal level=-30 dBm Noise level=-96 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:tsf=0000000c2a2a6e8e
|
qui me semble tout a fait correcte
mais quand j'essai de faire iwconfig
Code: | iwconfig -wlan0 essid "World"
ou
iwconfig -wlan0 essid "World |
il me donne ceux ci comme erreur
Code: | Error for wireless request "Set ESSID" (8B1A) :
SET failed on device -wlan0 ; No such device. |
et quand j'effectue un /etc/init.d/net.wlan0 restart
sa me donne ceux ci
Code: | * Stopping wlan0
* Bringing down wlan0
* Stopping dhcpcd on wlan0 ... [ ok
* Shutting down wlan0 ... [ ok
* Stopping wpa_cli on wlan0 ... [ ok
* Stopping wpa_supplicant on wlan0 ... [ ok
* Starting wlan0
* Starting wpa_supplicant on wlan0 ...
Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' d iver 'wext' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_suppl cant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
Line: 7 - start of a new network block
ssid - hexdump_ascii(len=5):
57 6f 72 6c 64 World
key_mgmt: 0x4
wep_key0 - hexdump(len=13): [REMOVED]
wep_tx_keyidx=0 (0x0)
Priority group 0
id=0 ssid='World'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:13:e8:85:79:71
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Setting scan request: 0 sec 100000 usec
Added interface wlan0
Daemonize.. [ ok
* Starting wpa_cli on wlan0 ... [ ok
* Backgrounding ...
|
donc voici mon fichier '/etc/wpa_supplicant/wpa_supplicant.conf'
Code: | # This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
#network={
# key_mgmt=NONE
# priority=-9999999
#}
network={
ssid="World"
key_mgmt=NONE
wep_key0=XXXXXXXXXXXXXXXXXXXXXXXXXX
wep_tx_keyidx=0
}
#network={
# ssid="Delle_Province Hotel"
# key_mgmt=NONE
#} |
et mon interface wifi n'est pas configurée
quelqu'un aurai une idée de mon problème?
que dois je faire pour pouvoir configuré mon interface? |
|
Back to top |
|
|
d2_racing Bodhisattva
Joined: 25 Apr 2005 Posts: 13047 Location: Ste-Foy,Canada
|
Posted: Fri May 09, 2008 7:10 pm Post subject: |
|
|
Peux-tu nous donner l'état de wpa_cli avant de faire quoi que ce soit ?
Tu n'est pas capable de t'associer d'après ce que je vois.
As-tu quelque chose dans dmesg quand tu fais te commandes avec iwconfig |
|
Back to top |
|
|
lermit Tux's lil' helper
Joined: 14 Oct 2005 Posts: 141
|
Posted: Sat May 10, 2008 3:20 pm Post subject: |
|
|
ok maintenant le iwconfig fonctionne; le problème a une mauvaise rédaction de ma part
iwconfig -wlan0 essid "World"
apres de la configuration de la carte wifi avec le iwcondif et dhclient , la connections c'est bien était faite.
le problème est maintenant de faire la configuration automatiquement au démarrage car elle ne s'effectue pas |
|
Back to top |
|
|
d2_racing Bodhisattva
Joined: 25 Apr 2005 Posts: 13047 Location: Ste-Foy,Canada
|
Posted: Sat May 10, 2008 5:18 pm Post subject: |
|
|
Salut, ça va être facile :
Lorsque ton connexion Wifi fonctionne, logue toi en root et exécute cette commande
Maintenant, vas dans /etc/wpa/wpa_supplicant et tape quelque chose du genre :
Code: |
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
ap_scan=0
#update_config=1
network={
ssid="gentoonet"
psk="XXXXXXXXXXXXXXXX"
proto=WPA2
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
priority=5
}
|
Techniquement avec ceci, c'est pour se brancher sur du WPA2 avec l'encryption AES(CCMP).
Pour le reste, tout se passe dans /etc/conf.d/net
Code: |
#WPA_SUPPLICANT
modules=( "wpa_supplicant" )
wpa_supplicant_wlan0_="-Dwext"
config_wlan0=( "dhcp" )
|
|
|
Back to top |
|
|
|