View previous topic :: View next topic |
Author |
Message |
humpback Retired Dev
Joined: 19 Oct 2002 Posts: 394 Location: Coimbra - Portugal
|
Posted: Mon Sep 01, 2003 8:53 pm Post subject: Apagar cd-rw |
|
|
Gravei aqui a dias um cd-rw. E hoje queria apagar o dito.
Code: | blumen portage # cdrdao blank --blank-mode full --device 0,1,0 --driver generic-mmc-raw
Cdrdao version 1.1.7 - (C) Andreas Mueller <andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'andreas-0.5-UNIXWARE_Patch'
0,1,0: SAMSUNG CD-R/RW SW-232B Rev: R301
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0000)
Blanking disk...
Blanking time: 2 seconds
|
Se tentar gravar algo depois ele indica que o cd esta ocupado. Um cdrdao disk-info mostra que o disco ainda ta cheio.
Se tentar com o cdrecord:
Code: | blumen portage # cdrecord blank=all dev=0,1,0
Cdrecord 2.01a14 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SAMSUNG '
Identifikation : 'CD-R/RW SW-232B '
Revision : 'R301'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Starting to write CD/DVD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
cdrecord: OPC failed.
blumen portage #
|
Alguma ideia? _________________ Gustavo Felisberto
Humpback @ #gentoo-pt
------------
It's most certainly GNU/Linux, not Linux. Read more at
http://www.gnu.org/gnu/why-gnu-linux.html .
------------- |
|
Back to top |
|
|
RoadRunner Bodhisattva
Joined: 12 Jun 2002 Posts: 490 Location: Coimbra, Portugal
|
Posted: Mon Sep 01, 2003 10:49 pm Post subject: |
|
|
Tenta o K3b que não passa de um frontend para isso tudo, mas pelo menos nunca houve um rw que ele não me apagasse. Tem uma opção de force que pode ser útil, mas não sei qual a opção que ele activa no cdrecord. |
|
Back to top |
|
|
Kakashi n00b
Joined: 31 Aug 2003 Posts: 7 Location: Amadora, ISCTE, etc...
|
Posted: Tue Sep 02, 2003 3:44 pm Post subject: |
|
|
o gcombust como frontend é mais levezito que o k3b e tambem faz o mesmo... eu recomendo _________________ Estar vivo é o contrário de estar morto (Lili Caneças). |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|