View previous topic :: View next topic |
Author |
Message |
SnowBear l33t
Joined: 03 Sep 2005 Posts: 773 Location: France - Bordeaux
|
Posted: Sat Mar 01, 2008 10:35 am Post subject: [X + nVidia] Problème de résolutions (résolu) |
|
|
Bonjour à tous,
ça commençais à faire un petit moment que je n'avais pas de problème avec ma gentoo.
Aujourd'hui nouveau pc, nouvelle installation et premier problème.
Le pc est équipé d'une carte graphique nVidia 6600GT qui fonctionnait très bien il y a quelques mois sous gentoo.
J'installe Xorg, les drivers, je configure, le lance X, les drivers nvidia sont bien pris en charge mais je me retrouve avec une résolution de 640x480 (au lieu de 1024x768, sur un 17" c'est génant).
Voici mon xorg.conf :
Code: | # nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Feb 14 18:20:37 PST 2008
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV43 [GeForce 6600 GT]"
Option "NoDDC" "true"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "true"
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection |
le make.conf :
Code: | INPUT_DEVICES="keyboard mouse"
VIDEO_CARDS="nvidia" |
Si vous avez des idées je suis preneur, merci d'avance.
Last edited by SnowBear on Sat Mar 01, 2008 1:01 pm; edited 1 time in total |
|
Back to top |
|
|
Desintegr l33t
Joined: 25 Mar 2004 Posts: 863 Location: France - Orléans
|
Posted: Sat Mar 01, 2008 11:13 am Post subject: |
|
|
À mon avis, la cause c'est l'option NoDDC. Mais ça dépend aussi de la version des pilotes utilisée.
Quote: | Option "NoDDC" "boolean"
Synonym for "IgnoreEDID". This option is deprecated, and no longer affects behavior of the X driver. See the "UseEDID" option for details.
Option "UseEDID" "boolean"
By default, the NVIDIA X driver makes use of a display device's EDID, when available, during construction of its mode pool. The EDID is used as a source for possible modes, for valid frequency ranges, and for collecting data on the physical dimensions of the display device for computing the DPI (see Appendix E, Dots Per Inch). |
_________________ Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr |
|
Back to top |
|
|
bob1977 Guru
Joined: 16 Mar 2004 Posts: 387
|
Posted: Sat Mar 01, 2008 11:55 am Post subject: |
|
|
Bonjour Snowbear,
Si ce n'est pas ce que dit Desintegr, peux-tu mettre ton log Xorg ( /var/log/Xorg.0.log )? |
|
Back to top |
|
|
SnowBear l33t
Joined: 03 Sep 2005 Posts: 773 Location: France - Bordeaux
|
Posted: Sat Mar 01, 2008 12:15 pm Post subject: |
|
|
J'avais oublié de valider ma réponse que voici :
Je viens de tester en changeant comme tu viens de dire, ça ne marche pas mieux, voici le log de X (juste ce qui concerne NVIDIA) :
Code: | (II) Module glx: vendor="NVIDIA Corporation"
(II) NVIDIA GLX Module 169.12 Thu Feb 14 18:45:56 PST 2008
(II) Module nvidia: vendor="NVIDIA Corporation"
(II) NVIDIA dlloader X Driver 169.12 Thu Feb 14 17:55:38 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(--) Chipset NVIDIA GPU found
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "UseEDID" "FALSE"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "true"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): Ignoring EDIDs
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(GPU-0): Not probing EDID on CRT-0.
(II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.27.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1024x768"; removing.
(WW) NVIDIA(0): No valid modes for "800x600"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 640 x 480
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): Built-in logo is bigger than the screen.
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled |
|
|
Back to top |
|
|
Desintegr l33t
Joined: 25 Mar 2004 Posts: 863 Location: France - Orléans
|
Posted: Sat Mar 01, 2008 12:17 pm Post subject: |
|
|
C'est normal ! Soit tu ne met pas l'option UseEDID, soit tu l'a met avec true comme valeur.
Code: | NVIDIA(0): Option "UseEDID" "FALSE" |
Si tu désactives l'EDID, le pilote ne récupère pas les informations de fréquence du moniteur et par conséquent il te met une résolution basique. _________________ Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr |
|
Back to top |
|
|
SnowBear l33t
Joined: 03 Sep 2005 Posts: 773 Location: France - Bordeaux
|
Posted: Sat Mar 01, 2008 12:22 pm Post subject: |
|
|
Je vois ce que tu veux dire mais ce n'est pas mieux :
Code: | grep NVIDIA /var/log/Xorg.0.log
(II) Module nvidia: vendor="NVIDIA Corporation"
(II) NVIDIA dlloader X Driver 169.12 Thu Feb 14 17:55:38 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(--) Chipset NVIDIA GPU found
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "UseEDID" "true"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "true"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Option "ModeValidation" "NoEdidModes"
(**) NVIDIA(0): Enabling RENDER acceleration
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.27.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Mode Validation Overrides for CRT-0:
(II) NVIDIA(0): NoEdidModes
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1024x768"; removing.
(WW) NVIDIA(0): No valid modes for "800x600"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(**) NVIDIA(0): Virtual screen size configured to be 1024 x 768
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled |
Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV43 [GeForce 6600 GT]"
# Option "NoDDC" "true"
Option "AllowGLXWithComposite" "true"
# Option "NvAGP" "3"
Option "UseEDID" "true"
# Option "UseEDIDFreqs" "FALSE"
# Option "UseEDIDDpi" "FALSE"
Option "ModeValidation" "NoEdidModes"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
Virtual 1024 768
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection |
La seule différence constatée : affichage du logo nvidia mais toujours la même résolution. |
|
Back to top |
|
|
Desintegr l33t
Joined: 25 Mar 2004 Posts: 863 Location: France - Orléans
|
Posted: Sat Mar 01, 2008 12:26 pm Post subject: |
|
|
Pourquoi ajoutes-tu l'option Option "ModeValidation" "NoEdidModes" ?
Tu désactives encore la détection des modes disponibles pour l'écran...
De plus, ton pilote est mal installé :
Code: | (EE) NVIDIA(0): Failed to initialize the GLX module |
_________________ Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Last edited by Desintegr on Sat Mar 01, 2008 12:27 pm; edited 2 times in total |
|
Back to top |
|
|
bob1977 Guru
Joined: 16 Mar 2004 Posts: 387
|
Posted: Sat Mar 01, 2008 12:26 pm Post subject: |
|
|
Quote: | EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver. |
Il y a un probleme avec le chargement de glx. Il faudrait faire:
Code: | eselect opengl set nvidia |
Eventuellement rmmod puis modprobe de nvidia avant.
EDIT:grillé |
|
Back to top |
|
|
SnowBear l33t
Joined: 03 Sep 2005 Posts: 773 Location: France - Bordeaux
|
Posted: Sat Mar 01, 2008 12:30 pm Post subject: |
|
|
Dans l'ordre :
Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV43 [GeForce 6600 GT]"
Option "AllowGLXWithComposite" "true"
Option "UseEDID" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
Virtual 1024 768
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
|
Code: | rmmod nvidia
emerge -1 nvidia-drivers
eselect opengl set nvidia
modprobe nvidia
/etc/init.d/xdm start |
Code: | (II) Module glx: vendor="NVIDIA Corporation"
(II) NVIDIA GLX Module 169.12 Thu Feb 14 18:45:56 PST 2008
(II) Module nvidia: vendor="NVIDIA Corporation"
(II) NVIDIA dlloader X Driver 169.12 Thu Feb 14 17:55:38 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(--) Chipset NVIDIA GPU found
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "UseEDID" "true"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "true"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce 6600 GT (NV43) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.27.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6600 GT at PCI:1:0:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1024x768"; removing.
(WW) NVIDIA(0): No valid modes for "800x600"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(**) NVIDIA(0): Virtual screen size configured to be 1024 x 768
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
|
Un warning de moins mais toujours pas de bonne résolution |
|
Back to top |
|
|
Desintegr l33t
Joined: 25 Mar 2004 Posts: 863 Location: France - Orléans
|
Posted: Sat Mar 01, 2008 12:34 pm Post subject: |
|
|
Donc, cette fois, on est sûr que ton écran ne supporte pas la configuration automatique via les informations EDID.
Code: | (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0 |
Il faut donc configurer manuellement ces informations.
Normalement, il suffit juste de bien configurer les options HorizSync et VertRefresh avec les bonnes spécifications de ton écran. _________________ Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr
Last edited by Desintegr on Sat Mar 01, 2008 12:36 pm; edited 2 times in total |
|
Back to top |
|
|
SnowBear l33t
Joined: 03 Sep 2005 Posts: 773 Location: France - Bordeaux
|
Posted: Sat Mar 01, 2008 12:36 pm Post subject: |
|
|
Desintegr wrote: | Donc, cette fois, on est sûr que ton écran ne supporte pas la configuration automatique via les informations EDID.
Il faut donc configurer manuellement ces informations.
Normalement, il suffit juste de bien configurer les options HorizSync et VertRefresh avec les bonnes spécifications de ton écran. |
Ok on va essayer de faire ça, du coups je désactive Option "UseEDID" "true" ou ce n'est pas gênant ? |
|
Back to top |
|
|
Desintegr l33t
Joined: 25 Mar 2004 Posts: 863 Location: France - Orléans
|
Posted: Sat Mar 01, 2008 12:38 pm Post subject: |
|
|
SnowBear wrote: | Ok on va essayer de faire ça, du coups je désactive Option "UseEDID" "true" ou ce n'est pas gênant ? |
Ce n'est pas génant.
Mais si tu ne veux pas avoir le warning (WW), il suffit de remettre UseEDID à false. _________________ Gentoo ~AMD64
Hoc Volo, Sic Jubeo !
Mon wiki : http://desintegr.free.fr |
|
Back to top |
|
|
SnowBear l33t
Joined: 03 Sep 2005 Posts: 773 Location: France - Bordeaux
|
Posted: Sat Mar 01, 2008 12:39 pm Post subject: |
|
|
C'est bon ça marche.
Merci pour vos explications. |
|
Back to top |
|
|
|