| View previous topic :: View next topic |
| Author |
Message |
Pazzeo
n00b
Joined: 24 Jun 2003
Posts: 54
|
 Posted: Mon Aug 25, 2003 5:04 pm Post subject: Problema risoluzione XFRee |
 |
|
Ciao ragazzi sono riuscito ad installare gentoo e va che è una meraviglia . Ho un problema nella configurazione di Xfree .Ho una scheda Nvida ed ho installato i driver per linux e un monitor LG Flatron 915ftplus . Vorrei usare la modalità 1024x768 a 120Hz perchè sotto windows xp riesco ad impostare questa modalità di lavoro. Vi posto il mio XF86Config:
| Code: |
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
Load "glx"
EndSection
Section "Monitor"
Identifier "LgFlatron915FTplus"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-107
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-200
vendorname "[LgFlatron915FTplus]"
modelname "[LgFlatron915FTplus]"
ModeLine "1024x768/120Hz" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
ModeLine "1152x864/99Hz" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
ModeLine "1024x768/100Hz" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
EndSection
Section "Device"
Identifier "Nvidia G-Force 5200FX"
VendorName "NVIDIA"
Driver "nvidia"
Option "NvAgp" "3"
Option "IgnoreEDID" "true"
Option "RenderAccel" "1"
Option "Backingstore"
Option "CursorShadow" "on"
Option "HWCursor" "on"
BoardName "Nvidia G-Force4FX"
VideoRam 131072
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Nvidia G-Force 5200FX"
Monitor "LgFlatron915FTplus"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768/100Hz" "1024x768" "800x600" "640x480"
ViewPort 0 0
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768/100Hz" "1024x768" "800x600" "640x480"
ViewPort 0 0
Virtual 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768/100Hz" "1024x768" "800x600" "640x480"
ViewPort 0 0
Virtual 0 0
EndSubsection
EndSection
|
Questo è il mio file e questo è il log:
| Code: |
I) NVIDIA(0): LgFlatron915FTplus: Using hsync range of 30.00-107.00 kHz
(II) NVIDIA(0): LgFlatron915FTplus: Using vrefresh range of 50.00-200.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 400.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1152x864/99Hz" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1152x768" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
|
Ecco come vedete io ho provato ad impostare 1024x768a 120Hz ma queando parte cambia e mette tutto a 100Hz le frequenze del monitor le ho lette dal manuale allegato al monitor
Ciao e grazie
Pazzeo |
|
| Back to top |
|
 |
Benve
l33t
Joined: 13 Mar 2003
Posts: 897
Location: Italy Romagna
|
| Posted: Mon Aug 25, 2003 5:38 pm Post subject: |
|
|
prova a mettere invece di questo:
| Code: | Subsection "Display"
Depth 24
Modes "1024x768/100Hz" "1024x768" "800x600" "640x480"
ViewPort 0 0
Virtual 0 0
EndSubsection
|
questo: | Code: | Subsection "Display"
Depth 24
Modes "1024x768/120Hz" "1024x768" "800x600" "640x480"
ViewPort 0 0
Virtual 0 0
EndSubsection
|
Per la frequenza io di solito mi affido al monitor, ho detto così a occhio |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30914
Location: here
|
| Posted: Mon Aug 25, 2003 6:43 pm Post subject: |
|
|
Prova a mettere la frequenza verticale (o orizzontale non mi ricordo mai qual'e') con valore fisso
120Hz al posto di 50-200.
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
Pazzeo
n00b
Joined: 24 Jun 2003
Posts: 54
|
| Posted: Mon Aug 25, 2003 7:40 pm Post subject: |
|
|
Ciao grazie ho provato come mi avete consigliato voi ma nulla nn va nulla
 
Ciao
Pazzeo |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Tue Aug 26, 2003 6:29 am Post subject: |
|
|
Prova queste: | Code: | # 1024x768
Modeline "1024x768" 94.5 1024 1072 1168 1376
768 769 772 808 +HSync +VSync
# 1152 x 864
Modeline "1152x864" 121.5 1152 1216 1344 1568
864 865 868 911 +HSync +VSync
# 1280 x 1024
Modeline "1280x1024" 157.5 1280 1344 1504 1728
1024 1025 1028 1072 +HSync +VSync
# 1600x1200
Modeline "1600x1200" 229.5 1600 1664 1856 2160
1200 1201 1204 1250 +HSync +VSync
EndSection |
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
bibi[M]
Apprentice
Joined: 10 Aug 2003
Posts: 153
|
| Posted: Tue Aug 26, 2003 7:56 am Post subject: |
|
|
Come fa notare il buon cerri in X si può forzare qualsiasi risoluzione@refresh usando il modeline adatto, segnalo questo link per la generazione di custom modelines:
http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
Se volete aumentare il refresh anche in console, una volta abilitato il giusto driver per framebuffer, basta passare al kernel:
video=DRIVER:XRESxYRES-DEPTH@REFRESH
Ovviamente le parti in maiuscolo vanno modificare a dovere =)
Anche se non l'ho mai provato, segnalo inoltre questo "hack" per modificare il refresh col driver vesa (vesafb):
https://forums.gentoo.org/viewtopic.php?t=71570
_________________
jazz lives!
For the italians: evitate: "ke", "xké", "qlc", "nn"... |
|
| Back to top |
|
|
Pazzeo
n00b
Joined: 24 Jun 2003
Posts: 54
|
| Posted: Tue Aug 26, 2003 11:04 am Post subject: |
|
|
Niete da fare le ho provate tutte ma continua ad andare a 1024x768 a 85 Hz ecco il file di log :
| Code: | :
) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xE0000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce FX 5200
(--) NVIDIA(0): VideoBIOS: 04.34.20.18.00
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Detected TV Encoder: NVIDIA
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 400 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 400 MHz
(II) NVIDIA(0): Not probing EDIDs.
(II) NVIDIA(0): LgFlatron915FTplus: Using hsync range of 30.00-107.00 kHz
(II) NVIDIA(0): LgFlatron915FTplus: Using vrefresh range of 50.00-200.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 400.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using mode "800 x600" (no mode of this name)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NVIDIA(0): Not using mode "1152x864@100" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1152x768" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "1024x768@120":
(WW) NVIDIA(0): horizontal sync width (1688 - 1056 = 632) greater than 512
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(**) NVIDIA(0): Mode "1024x768@100": 126.6 MHz, 80.8 kHz, 100.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "896x672": 130.5 MHz, 106.3 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(**) NVIDIA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(==) NVIDIA(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
[1] 0 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe2001000 - 0xe2001fff (0x1000) MX[B]
[8] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
[9] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX[B]
[10] -1 0 0xe2003000 - 0xe2003fff (0x1000) MX[B]
[11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[13] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[22] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): AGP 8X successfully initialized
(II) NVIDIA(0): Setting mode "1024x768"
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(**) NVIDIA(0): Option "BackingStore"
(**) NVIDIA(0): Backing store enabled
|
Che disperazione nn riesco proprio a capire dove sta il problema 
Ciao
Pazzeo |
|
| Back to top |
|
|
Pazzeo
n00b
Joined: 24 Jun 2003
Posts: 54
|
| Posted: Tue Aug 26, 2003 9:00 pm Post subject: |
|
|
Ciao ho risolto ,in parte, ora riesco ad andare a 1024x768 ad un refresh di 100Hz a 120Hz nn ne vuole sapere di andare . Ora pero' è sorto un altro problema il framebuffer prima andava .....ora nn va piu e nn so il perche dato che nn ho cambiato nulla dove puo essere il problema???
Volevo chiedere anche un ultima cosa come faccio a vedere se all'avvio hard disk viene posto in modalità UDMA???
Ciaoo e grazie
Pazzep |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Tue Aug 26, 2003 9:07 pm Post subject: |
|
|
| Pazzeo wrote: | | Ciao ho risolto ,in parte, ora riesco ad andare a 1024x768 ad un refresh di 100Hz |
Come hai fatto?
| Pazzeo wrote: | | a 120Hz nn ne vuole sapere di andare . Ora pero' è sorto un altro problema il framebuffer prima andava .....ora nn va piu e nn so il perche dato che nn ho cambiato nulla dove puo essere il problema??? |
Beh, quello che dici non e' possibile... Ma cosa intendi con framebuffer? FBDEV? La console?
| Pazzeo wrote: | | Volevo chiedere anche un ultima cosa come faccio a vedere se all'avvio hard disk viene posto in modalità UDMA??? |
All'avvio devi essere velocissimo mentre scorre il DMESG, altrimenti puoi sempre fare (ammettendo che il tuo disco sia /dev/hda)
| Code: | | # hdparm -d /dev/hda |
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
Pazzeo
n00b
Joined: 24 Jun 2003
Posts: 54
|
| Posted: Tue Aug 26, 2003 9:22 pm Post subject: |
|
|
Ciao cerri allora il dma funziona e sono contento ci mancava solo che quello  )
Allora per il refresh a 100 Hz ho tolot tutte le modeline e ho messo questa
| Code: |
ModeLine "1024x768/100Hz" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
|
E cosi va ma nn sono riuscito a metterlo a 120Hz il sito che mi ha consigliato bibi mi da valori sballati che nn acceta!!
Il problema è che sul framebuffer quando faccio il boot nn carica piu' l'immagine predefinita e nn so il perchè dipende dal XFree86Config ???
Ciaoo Pazzzeo |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Wed Aug 27, 2003 6:16 am Post subject: |
|
|
| Pazzeo wrote: | Ciao cerri allora il dma funziona e sono contento ci mancava solo che quello )
Allora per il refresh a 100 Hz ho tolot tutte le modeline e ho messo questa
| Code: |
ModeLine "1024x768/100Hz" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
|
E cosi va ma nn sono riuscito a metterlo a 120Hz il sito che mi ha consigliato bibi mi da valori sballati che nn acceta!! |
In pratica ti funziona se metti solo la modeline di cui sopra?
Se si, prova anche SOLO le altre modeline che ti abbiamo postato / linkato.
| Pazzeo wrote: | | Il problema è che sul framebuffer quando faccio il boot nn carica piu' l'immagine predefinita e nn so il perchè dipende dal XFree86Config ??? |
No, non puo' dipendere da XF86Config, dai un'occhiata al grub o a lilo.
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
Pazzeo
n00b
Joined: 24 Jun 2003
Posts: 54
|
| Posted: Wed Aug 27, 2003 7:16 am Post subject: |
|
|
| Quote: |
In pratica ti funziona se metti solo la modeline di cui sopra?
Se si, prova anche SOLO le altre modeline che ti abbiamo postato / linkato.
|
Praticamente si nn vanno purtroppo ........come posso generare modeline adatte al mio monitor???
Per il problema del framebuffer ho risolto era un problema nel grub.conf...
Ciaoo
Pazzeo |
|
| Back to top |
|
|
cerri
Bodhisattva
Joined: 05 Mar 2003
Posts: 2957
Location: # init S
|
| Posted: Wed Aug 27, 2003 7:59 am Post subject: |
|
|
Dai un'occhiata al link postato da bibi[M].
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
| Back to top |
|
|
Pazzeo
n00b
Joined: 24 Jun 2003
Posts: 54
|
| Posted: Wed Aug 27, 2003 8:07 am Post subject: |
|
|
Ciao ho gia provato quel sito ma mi da modeline che nn funzionano ..... inoltre nn conosco il valore del Dot Clock Frequency sul manuale nn è riportato
Ciaoo
Pazzeo |
|
| Back to top |
|
|
bibi[M]
Apprentice
Joined: 10 Aug 2003
Posts: 153
|
| Posted: Fri Sep 12, 2003 11:52 am Post subject: |
|
|
| Pazzeo wrote: | Ciao ho gia provato quel sito ma mi da modeline che nn funzionano ..... inoltre nn conosco il valore del Dot Clock Frequency sul manuale nn è riportato
|
In quel certo sito, prova ad utilizzare solo il secondo box, quello dove chiede la geometria ed il refresh, inserisci solo questi 3 valori e fai submit, la modelines generata _dovrebbe_ funzionare.
Ovviamente poi nella sezione Screen dell'XF86config devi aggiungere il nome della modelines appena inserita.
Edite: oltre al sito ho scoperto il comando "gft", può creare modelines sia per X che per fb.modes ...man gtf ^_-
_________________
jazz lives!
For the italians: evitate: "ke", "xké", "qlc", "nn"... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
