View previous topic :: View next topic |
Author |
Message |
red-arrow n00b
Joined: 21 Apr 2005 Posts: 48 Location: Brescia, Italy
|
Posted: Mon Oct 22, 2007 4:58 pm Post subject: problema modem alice gate 2 Wi-fi |
|
|
Sto cercando di installare Gentoo su un PC connesso ad Internet tramite il famigerato Alice Gate 2 Wi-fi. Sembra un router ma non lo è!!! Per utilizzarlo (sto parlando di collegamento via Ethernet) serve connettersi con nome utente e password. In fase di installazione dopo aver caricato il modulo appropriato della mia scheda di rete, provo a configurarlo.
imposto tutto compreso nome utente e password ma una volta digitato
tenta di connettersi e va in time out.
CHE FARE?
P.S.
Il ping al router funziona e il ping al DNS Alice mi dice Destination Host unreachable.
Grazie _________________ "Quando vedo passare un'Alfa Romeo mi tolgo sempre il cappello" H. Ford |
|
Back to top |
|
|
Tigerwalk Guru
Joined: 15 May 2007 Posts: 475 Location: Napoli
|
Posted: Mon Oct 22, 2007 5:15 pm Post subject: |
|
|
a me è andato con pppoe
pppoe-setup (configuri i DNS e la password)
pppoe-start
pppoe-stop _________________ Linux user N°447789
Carpe diem (quam minimum credula postero) -Orazio (I,11) |
|
Back to top |
|
|
red-arrow n00b
Joined: 21 Apr 2005 Posts: 48 Location: Brescia, Italy
|
Posted: Mon Oct 22, 2007 5:25 pm Post subject: |
|
|
errore mio:
anch'io ho utilizzato pppoe etc etc e non funziona _________________ "Quando vedo passare un'Alfa Romeo mi tolgo sempre il cappello" H. Ford |
|
Back to top |
|
|
Tigerwalk Guru
Joined: 15 May 2007 Posts: 475 Location: Napoli
|
Posted: Mon Oct 22, 2007 5:32 pm Post subject: |
|
|
strano
ifconfig
che dice? _________________ Linux user N°447789
Carpe diem (quam minimum credula postero) -Orazio (I,11) |
|
Back to top |
|
|
red-arrow n00b
Joined: 21 Apr 2005 Posts: 48 Location: Brescia, Italy
|
Posted: Mon Oct 22, 2007 5:35 pm Post subject: |
|
|
Questo è l'output di
Destination Gateway GenMask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 u 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 u 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 ug 0 0 0 eth0 _________________ "Quando vedo passare un'Alfa Romeo mi tolgo sempre il cappello" H. Ford |
|
Back to top |
|
|
red-arrow n00b
Joined: 21 Apr 2005 Posts: 48 Location: Brescia, Italy
|
Posted: Mon Oct 22, 2007 5:42 pm Post subject: |
|
|
ifconfig mi trova correttamente la scheda di rete _________________ "Quando vedo passare un'Alfa Romeo mi tolgo sempre il cappello" H. Ford |
|
Back to top |
|
|
Tigerwalk Guru
Joined: 15 May 2007 Posts: 475 Location: Napoli
|
Posted: Mon Oct 22, 2007 6:40 pm Post subject: |
|
|
hai provato a controllare i DNS in /etc/resolv.conf _________________ Linux user N°447789
Carpe diem (quam minimum credula postero) -Orazio (I,11) |
|
Back to top |
|
|
red-arrow n00b
Joined: 21 Apr 2005 Posts: 48 Location: Brescia, Italy
|
Posted: Mon Oct 22, 2007 7:04 pm Post subject: |
|
|
Non è un problema di DNS. Il ping a qualsiasi indirizzo IP mi restituisce: "Destination Host unreachable" _________________ "Quando vedo passare un'Alfa Romeo mi tolgo sempre il cappello" H. Ford |
|
Back to top |
|
|
!ico Apprentice
Joined: 26 Oct 2005 Posts: 199 Location: Bassano del Grappa (VI)
|
Posted: Tue Oct 23, 2007 8:08 am Post subject: |
|
|
questo modem che-sembra-un-router-ma-che-non-lo-è per caso ha un firewall attivato?
ola _________________ " I tasti iniziano. I tasti finiscono. Tu sai che sono 88; su questo nessuno può fregarti. Non sono infiniti loro. Tu, tu sei infinito, e dentro quei tasti, infinita è la musica che puoi fare. Loro sono 88. Tu sei infinito".
Novecento (Baricco) |
|
Back to top |
|
|
Onip Advocate
Joined: 02 Sep 2004 Posts: 2912 Location: Parma (Italy)
|
Posted: Tue Oct 23, 2007 10:26 am Post subject: |
|
|
a me con pppoe ha funzionato. purtroppo ero a casa di un amico e non posso darti indicazioni ulteriori se non quella di controllare la configurazione del kernel e di seguire questa guida. _________________ Linux Registered User n. 373835
Titus Lucretius Carus, De Rerum Natura - Tantum religio potuit suadere malorum |
|
Back to top |
|
|
topper_harley Guru
Joined: 05 Apr 2006 Posts: 363 Location: Treviso / Udine (Italy)
|
Posted: Tue Oct 23, 2007 1:01 pm Post subject: |
|
|
Per qualche strano motivo, l'ip che ti viene assegnato quando fai l'associazione all'ap non va.
Prova a dare un "ifconfig ethX 192.168.1.1 && pppoe-start".
Nel mio caso ha funzionato. _________________ http://topperh.ath.cx
Jabber: topper_harley@jabber.org
ICQ: 224179391
MSN: Topper_Harley80@gmail.com
Last FM |
|
Back to top |
|
|
red-arrow n00b
Joined: 21 Apr 2005 Posts: 48 Location: Brescia, Italy
|
Posted: Tue Oct 23, 2007 5:32 pm Post subject: |
|
|
niente da fare! continua a dirmi:
Code: | ..................... TIMED OUT
/usr/sbin/pppoe-start: line 196:10503 Terminated $CONNECT <(echo "$CONFREAD") >/dev/null 2>&1 |
Adesso prendo il martello e devasto il modem. _________________ "Quando vedo passare un'Alfa Romeo mi tolgo sempre il cappello" H. Ford |
|
Back to top |
|
|
topper_harley Guru
Joined: 05 Apr 2006 Posts: 363 Location: Treviso / Udine (Italy)
|
Posted: Tue Oct 23, 2007 6:13 pm Post subject: |
|
|
Prova in questo modo:
Code: | config_eth1=( "null" )
config_ppp0=("ppp")
link_ppp0="eth1"
plugins_ppp0=("pppoe")
username_ppp0='xxxxxxx # edit this
password_ppp0='xxxxxxx' # and this
pppd_ppp0=("defaultroute" "usepeerdns") |
Code: | /home/scripts/internet_start |
Code: | #!/bin/bash
/etc/init.d/net.ppp0 stop
ifconfig eth1 down
ifconfig eth1 up
iwconfig eth1 mode managed
iwconfig eth1 essid Alice-xxxxxxxxx #qui metti l'essid
iwconfig eth1 key s:xxxxxxxxx #qui la chiave wep
ifconfig eth1 192.168.1.1
/etc/init.d/net.ppp0 start
watch tail /var/log/messages |
Assegna permessi di esecuzione allo script e lancialo da root.
DEVE FUNZIONARE!!!! _________________ http://topperh.ath.cx
Jabber: topper_harley@jabber.org
ICQ: 224179391
MSN: Topper_Harley80@gmail.com
Last FM |
|
Back to top |
|
|
red-arrow n00b
Joined: 21 Apr 2005 Posts: 48 Location: Brescia, Italy
|
Posted: Tue Oct 23, 2007 6:30 pm Post subject: |
|
|
mi dice permission denied... io sono ancora in fase di installazione...
rispondo a una vecchia domanda:
il modem non credo abbia un firewall e anche se dovesse averlo non è possibile configurare il dispositivo in quanto se entro in 192.168.1.1 permette solo di verdere lo stato del modem e non è possibile fare altro. _________________ "Quando vedo passare un'Alfa Romeo mi tolgo sempre il cappello" H. Ford |
|
Back to top |
|
|
topper_harley Guru
Joined: 05 Apr 2006 Posts: 363 Location: Treviso / Udine (Italy)
|
Posted: Tue Oct 23, 2007 7:52 pm Post subject: |
|
|
intendevo dire che devi modificare il file /etc/conf.d/net nella maniera indicata sotto... _________________ http://topperh.ath.cx
Jabber: topper_harley@jabber.org
ICQ: 224179391
MSN: Topper_Harley80@gmail.com
Last FM |
|
Back to top |
|
|
Tigerwalk Guru
Joined: 15 May 2007 Posts: 475 Location: Napoli
|
Posted: Tue Oct 23, 2007 10:07 pm Post subject: |
|
|
red-arrow wrote: |
mi dice permission denied... io sono ancora in fase di installazione...
rispondo a una vecchia domanda:
il modem non credo abbia un firewall e anche se dovesse averlo non è possibile configurare il dispositivo in quanto se entro in 192.168.1.1 permette solo di verdere lo stato del modem e non è possibile fare altro. |
Code: | nano /etc/conf.d/net |
_________________ Linux user N°447789
Carpe diem (quam minimum credula postero) -Orazio (I,11) |
|
Back to top |
|
|
GNUtoo Veteran
Joined: 05 May 2005 Posts: 1919
|
Posted: Wed Oct 24, 2007 4:23 pm Post subject: |
|
|
ciao...mi sono abbonato a alice(10 mega/384kbs upload)...
ho qualche questione:
*per installare il modem ce un cd ma e per windows...dunque devo fare:
Code: |
pppoe-setup
pppoe-start
|
giusto? e dove trovo questi software?(la bash non me gli trova)
*come faccio per installare l'openWRT e offrire servizi?
quelli paquetti ho bisogna d'installare
Code: | # ipkg list | grep ppoe
kmod-pppoe - 2.4.34-brcm-1 - PPPoE support
ppp-mod-pppoe - 2.4.3-7 - PPPoE plugin
rp-pppoe-client - 3.8-1 - PPPoE (PPP over Ethernet) client
rp-pppoe-relay - 3.8-1 - PPPoE (PPP over Ethernet) relay
rp-pppoe-server - 3.8-1 - PPPoE (PPP over Ethernet) server
rp-pppoe-sniff - 3.8-1 - PPPoE (PPP over Ethernet) sniffer |
poi faccio il dyndns normalmente e metto openvpn/ssh(ho provato il vpn ssh ma non ci sono riusito) come faccevo prima(con il dyndns in piu perche alice non offre un ip fisso)?
e per connectere pc sotto gentoo(3) e ubuntu(1) e windowsXP(1) faccio normalmente?(mi connetto al wifi del openWRT che avra pppoe?)
*dentro l'offerta ce anche un numero VOIP...
comme faccio per usarlo senza il loro software che e solo per windows?
functionna con ekiga?
*poi ho trovato questo:
Code: | * app-mobilephone/galicesms [ Masked ]
Latest version available: 1.61
Latest version installed: [ Not Installed ]
Size of files: 7 kB
Homepage: http://www.marzocca.net/linux/galicesms.html
Description: GTK2 GUI interface for sending SMS messages via Rosso Alice(Italian ADSL service)
License: GPL-2
|
penso che dovrebbe interessarvi... |
|
Back to top |
|
|
Tigerwalk Guru
Joined: 15 May 2007 Posts: 475 Location: Napoli
|
Posted: Wed Oct 24, 2007 4:34 pm Post subject: |
|
|
red-arrow wrote: |
mi dice permission denied... io sono ancora in fase di installazione...
rispondo a una vecchia domanda:
il modem non credo abbia un firewall e anche se dovesse averlo non è possibile configurare il dispositivo in quanto se entro in 192.168.1.1 permette solo di verdere lo stato del modem e non è possibile fare altro. |
ho trovato questa discussione su un altro forum, dai uno sguardo! _________________ Linux user N°447789
Carpe diem (quam minimum credula postero) -Orazio (I,11) |
|
Back to top |
|
|
red-arrow n00b
Joined: 21 Apr 2005 Posts: 48 Location: Brescia, Italy
|
Posted: Wed Oct 24, 2007 4:40 pm Post subject: |
|
|
Provato anche questo... inizia a leggere dal live CD e si inchioda costringendomi ad interrompere il tutto con CTRL-C _________________ "Quando vedo passare un'Alfa Romeo mi tolgo sempre il cappello" H. Ford |
|
Back to top |
|
|
Tigerwalk Guru
Joined: 15 May 2007 Posts: 475 Location: Napoli
|
Posted: Wed Oct 24, 2007 5:44 pm Post subject: |
|
|
red-arrow wrote: | Provato anche questo... inizia a leggere dal live CD e si inchioda costringendomi ad interrompere il tutto con CTRL-C |
Comunque, se il tuo problema adesso è installare, puoi comunque farlo da una shell di un'altra distro, oppure da un live CD o DVD che ti riconosca la scheda e ti permetta la connessione. Prova con knoppix che a me ha riconosciuto subito il tuo dtesso modem, permettendomi anche di usare il wi-fi.
[EDIT]: dopo aver fatto pppoe etc, etc., prova a dare
Code: | dhclient eth0 && echo "nameserver 192.168.1.1" > /etc/resolv.conf |
_________________ Linux user N°447789
Carpe diem (quam minimum credula postero) -Orazio (I,11)
Last edited by Tigerwalk on Wed Oct 24, 2007 8:12 pm; edited 1 time in total |
|
Back to top |
|
|
|