| View previous topic :: View next topic |
| Author |
Message |
Grilo
Tux's lil' helper
Joined: 22 Apr 2003
Posts: 114
Location: Canada
|
 Posted: Wed Jul 30, 2003 12:08 pm Post subject: Help with small things. |
 |
|
Ok so I have been running gentoo for about 8 months now and love it. I have had some trouble after getting my Gigabyte motherboard and its' KT400a chipset. I then saw the 2.6 beta release and heard it was ready with kt400a support. I was previously running the gentoo-sources 2.4.20 kernel and everything was fine minus the hardware acceleration from my video card due to the kt400a chipset not being recognized. also my supermount was lost from the kernel, I know i can patch that so i am not worried. would have been nice kept in the kernel. so my issues are my agp setup and my fstab i am posting my dmesg and my fstab. if someone can help with the agp thing. all i know is it sees it and then loads something else.
Thanks all for the help
Patrick
DMESG
| Code: |
91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1543.0227 MHz.
..... host bus clock speed is 293.0948 MHz.
Starting migration thread for cpu 0
CPUS done 2
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xf9f60, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030619
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:..................................................................................................
Table [DSDT](id F004) - 439 Objects with 45 Devices 125 Methods 21 Regions
ACPI Namespace successfully loaded at root c056497c
evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000004020 on int 9
Completing Region/Field/Buffer/Package initialization:....................................................
Initialized 21/21 Regions 5/5 Fields 18/18 Buffers 14/14 Packages (447 nodes)
Executing all Device _STA and_INI methods:..............................................
46 Devices found containing: 46 _STA, 1 _INI methods
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
pci_link-0256 [17] acpi_pci_link_get_curr: No IRQ resource found
ACPI: PCI Interrupt Link [ALKA] (IRQs 20, disabled)
pci_link-0256 [19] acpi_pci_link_get_curr: No IRQ resource found
ACPI: PCI Interrupt Link [ALKB] (IRQs 21, disabled)
pci_link-0256 [21] acpi_pci_link_get_curr: No IRQ resource found
ACPI: PCI Interrupt Link [ALKC] (IRQs 22, disabled)
pci_link-0256 [23] acpi_pci_link_get_curr: No IRQ resource found
ACPI: PCI Interrupt Link [ALKD] (IRQs 23, disabled)
Linux Plug and Play Support v0.96 (c) Adam Belay
SCSI subsystem initialized
Linux Kernel Card Services 3.1.22
options: [pci] [pm]
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
pci_link-0256 [21] acpi_pci_link_get_curr: No IRQ resource found
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 0
pci_link-0256 [22] acpi_pci_link_get_curr: No IRQ resource found
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 0
pci_link-0256 [23] acpi_pci_link_get_curr: No IRQ resource found
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 0
pci_link-0256 [24] acpi_pci_link_get_curr: No IRQ resource found
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 0
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xa9 -> IRQ 17)
00:00:09[A] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb1 -> IRQ 18)
00:00:09[B] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 19)
00:00:09[C] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16)
00:00:09[D] -> 2-16 -> IRQ 16
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [22] acpi_pci_link_get_irq : Link disabled
pci_link-0502 [24] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [23] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [23] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:10.0
ACPI: No IRQ known for interrupt pin A of device 0000:00:10.0
pci_link-0502 [24] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [23] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [23] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:10.1
ACPI: No IRQ known for interrupt pin B of device 0000:00:10.1
pci_link-0502 [24] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [23] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [23] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:10.2
ACPI: No IRQ known for interrupt pin C of device 0000:00:10.2
pci_link-0502 [24] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [23] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [23] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:10.3
ACPI: No IRQ known for interrupt pin D of device 0000:00:10.3
pci_link-0502 [24] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [23] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [23] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=12, xclk=20000 from BIOS
radeonfb: probed DDR SGRAM 131072k videoram
radeon_get_moninfo: bios 4 scratch = 2000002
radeonfb: cannot map FB
pty: 256 Unix98 ptys configured
Machine check exception polling timer started.
Enabling SEP on CPU 0
Journalled Block Device driver loaded
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
lp: driver loaded but no devices found
Real Time Clock Driver v1.11
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro KT400 chipset <This is What i want.
agpgart: Maximum main memory to use for agp memory: 816M <This too
agpgart: AGP aperture is 128M @ 0xe0000000 <and this
[drm] Initialized radeon 1.9.0 20020828 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: cpp_mux: aa55f00f52ad51(3f)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_mux: aa55f00f52ad51(3f)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
anticipatory scheduling elevator
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
pci_link-0502 [23] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [22] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [22] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: MAXTOR 6L040J2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
hdd: HITACHI DVD-ROM GD-7000, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: host protected area => 1
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
hdb: max request size: 128KiB
hdb: host protected area => 1
hdb: 78177792 sectors (40027 MB) w/1820KiB Cache, CHS=77557/16/63, UDMA(133)
/dev/ide/host0/bus0/target1/lun0: p1
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
pci_link-0502 [23] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [22] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [22] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:10.3
ACPI: No IRQ known for interrupt pin D of device 0000:00:10.3
ehci_hcd 0000:00:10.3: VIA Technologies, In USB 2.0
ehci_hcd 0000:00:10.3: irq 11, pci mem f8833000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13
hub 1-0:0: USB hub found
hub 1-0:0: 6 ports detected
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1pci_link-0502 [23] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [22] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [22] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:10.0
ACPI: No IRQ known for interrupt pin A of device 0000:00:10.0
uhci-hcd 0000:00:10.0: VIA Technologies, In USB
uhci-hcd 0000:00:10.0: irq 10, io base 0000d400
uhci-hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:0: USB hub found
hub 2-0:0: 2 ports detected
pci_link-0502 [23] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [22] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [22] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:10.1
ACPI: No IRQ known for interrupt pin B of device 0000:00:10.1
uhci-hcd 0000:00:10.1: VIA Technologies, In USB (#2)
uhci-hcd 0000:00:10.1: irq 10, io base 0000d800
uhci-hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:0: USB hub found
hub 3-0:0: 2 ports detected
pci_link-0502 [23] acpi_pci_link_get_irq : Link disabled
pci_irq-0254 [22] acpi_pci_irq_lookup : Invalid IRQ link routing entry
pci_irq-0294 [22] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:10.2
ACPI: No IRQ known for interrupt pin C of device 0000:00:10.2
uhci-hcd 0000:00:10.2: VIA Technologies, In USB (#3)
uhci-hcd 0000:00:10.2: irq 11, io base 0000dc00
uhci-hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
hub 4-0:0: USB hub found
hub 4-0:0: 2 ports detected
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver usbscanner
drivers/usb/image/scanner.c: 0.4.13:USB Scanner Driver
mice: PS/2 mouse device common for all mice
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
i2c /dev entries driver module version 2.7.0 (20021208)
Advanced Linux Sound Architecture Driver Version 0.9.4 (Mon Jun 09 12:01:18 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ALSA device list:
#0: Ensoniq AudioPCI ENS1371 at 0xd000, irq 18
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
BIOS EDD facility v0.09 2003-Jan-22, 2 devices found
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 184k freed
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x501
hub 1-0:0: debounce: port 5: delay 100ms stable 4 status 0x501
hub 1-0:0: debounce: port 6: delay 100ms stable 4 status 0x501
hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 2-0:0: new USB device on port 1, assigned address 2
Adding 771080k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda6, internal journal
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xf889b000, 00:20:ed:85:90:35, IRQ 18
eth0: Identified 8139 chip type 'RTL-8139C'
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended <?
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended <What is this?
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
drivers/usb/core/message.c: usb_control/bulk_msg: timeout
eth0: Setting 10mbps half-duplex based on auto-negotiated partner ability 4021.
blk: queue c05695dc, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0569938, I/O limit 4095Mb (mask 0xffffffff)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. <Why is it loading again? and something that is not what it said it was?
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Loading R200 Microcode
cdrom: This disc doesn't have any tracks I recognize!
|
Please help
Patrick 
_________________
Knowledge is power but the drive to learn is harnessing wizdom |
|
| Back to top |
|
 |
pjp
Administrator
Joined: 16 Apr 2002
Posts: 20067
|
| Posted: Wed Jul 30, 2003 4:16 pm Post subject: |
|
|
What video settings did you select in the kernel?
Moved from Installing Gentoo. |
|
| Back to top |
|
|
Grilo
Tux's lil' helper
Joined: 22 Apr 2003
Posts: 114
Location: Canada
|
| Posted: Wed Jul 30, 2003 8:27 pm Post subject: |
|
|
I have the agpart, all radeon settings, and drm all installed into the kernel. not currently at the machine but will re check but i believe that i have all with kt400 and ati compiled in.
Patrick
_________________
Knowledge is power but the drive to learn is harnessing wizdom |
|
| Back to top |
|
|
Grilo
Tux's lil' helper
Joined: 22 Apr 2003
Posts: 114
Location: Canada
|
| Posted: Thu Jul 31, 2003 1:07 am Post subject: |
|
|
I have frame buffer devices with ati radeion, I have agpart support with via, direct rendering and ati radeon all compiled into the kernel. running the xfree drivers.
Patrick
_________________
Knowledge is power but the drive to learn is harnessing wizdom |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
