View previous topic :: View next topic |
Author |
Message |
ginsoak Tux's lil' helper
Joined: 10 Feb 2005 Posts: 139 Location: Berlin
|
Posted: Fri Sep 28, 2007 3:31 pm Post subject: problema GLX con nvidia-drivers |
|
|
Sono passato dal driver via al driver nvidia dopo aver installato una scheda Nvidia PCI-Express e aver ricompilato xorg-server con VIDEO_CARDS="nvidia".
Il problema è questo: GLX sembra non voler funzionare, Xorg restituisce questo errore
Quote: | (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
(EE) AIGLX: DRI module not loaded |
Uso x11-drivers/nvidia-drivers-100.14.09,
Xorg.conf è configurato così:
Code: | Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "glx"
EndSection |
Ho cercato risposte sul forum ma niente sembra funzionare, se qualcuno ha suggerimenti saranno davvero apprezzati! |
|
Back to top |
|
|
CarloJekko Veteran
Joined: 31 Mar 2005 Posts: 1315 Location: Baia Domizia :-)
|
|
Back to top |
|
|
ginsoak Tux's lil' helper
Joined: 10 Feb 2005 Posts: 139 Location: Berlin
|
Posted: Fri Sep 28, 2007 4:49 pm Post subject: |
|
|
Seguito alla lettera! |
|
Back to top |
|
|
Scen Retired Dev
Joined: 29 Jul 2003 Posts: 2470 Location: Padova, Italy
|
Posted: Fri Sep 28, 2007 7:16 pm Post subject: |
|
|
Code: |
eselect opengl list
|
cosa dice? _________________ I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny |
|
Back to top |
|
|
ginsoak Tux's lil' helper
Joined: 10 Feb 2005 Posts: 139 Location: Berlin
|
Posted: Fri Sep 28, 2007 8:14 pm Post subject: |
|
|
Code: | > eselect opengl list
Available OpenGL implementations:
[1] nvidia *
[2] xorg-x11 |
|
|
Back to top |
|
|
riverdragon Veteran
Joined: 14 Sep 2006 Posts: 1269 Location: Verona
|
Posted: Sun Sep 30, 2007 10:33 am Post subject: |
|
|
Hai provato a reinstallare il pacchetto? A volte è l'unica soluzione. |
|
Back to top |
|
|
ginsoak Tux's lil' helper
Joined: 10 Feb 2005 Posts: 139 Location: Berlin
|
Posted: Sun Sep 30, 2007 11:04 am Post subject: |
|
|
Ho reinstalato nvidia-drivers, xorg, ricompilato il kernel... niente!
E` la prima volta che il driver nvidia mi da problemi e non capisco proprio dove sbaglio. |
|
Back to top |
|
|
Laux n00b
Joined: 25 Apr 2007 Posts: 44 Location: Monkey Island
|
Posted: Sun Sep 30, 2007 11:09 am Post subject: |
|
|
A suo tempo mi trovai ad avere problemi con nVidia, ti indico due controllini da fare:
1) Suppongo che i driver nVidia siano supportati dalla tua scheda, ma a volte ci sono dei piccoli problemi: controlla la lista di schede supportate sul sito nVidia.
2) Xorg aggiornato: con un amico dovemmo aggiornare xorg poichè incompatibile con i drive aggiornati nVidia
Giusto per sicurezza |
|
Back to top |
|
|
ginsoak Tux's lil' helper
Joined: 10 Feb 2005 Posts: 139 Location: Berlin
|
Posted: Sun Sep 30, 2007 11:14 am Post subject: |
|
|
La scheda è supportata (6200LE attualmente in commercio), e la versione di xorg-server installata è la più recente. |
|
Back to top |
|
|
regisinferni n00b
Joined: 30 Sep 2007 Posts: 26
|
Posted: Sun Sep 30, 2007 12:39 pm Post subject: |
|
|
prova con un nvidia-xconfig
avevo un problema simile con la mia 6600
Se ti può essere d'aiuto ecco il mio xorg.conf
Code: |
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (root@evilzpc) Sat Sep 29 18:57:44 Local time zone must be set--see zic manual page 2007
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Sep 12 14:29:17 PDT 2007
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "logiaccess"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
# Identifier and driver
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 31.5 - 64.3
VertRefresh 50.0 - 90.0
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 31.5 - 64.3
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "nvidia"
VendorName "Unknown"
BoardName "Unknown"
Option "AddARGBGLXVisuals" "true"
Option "UseEvents" "false"
Option "RenderAccel" "true"
EndSection
Section "Device"
VideoRam 262144
# Insert Clocks lines here if appropriate
Identifier "** NVIDIA (generic) [nv]"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "** NVIDIA (generic) [nv]"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1024x768_75 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
|
|
|
Back to top |
|
|
ginsoak Tux's lil' helper
Joined: 10 Feb 2005 Posts: 139 Location: Berlin
|
Posted: Sun Sep 30, 2007 12:46 pm Post subject: |
|
|
Mi sento di escludere un problema procedurale nell'installazione del driver, così come un problema di configurazione di xorg.conf |
|
Back to top |
|
|
riverdragon Veteran
Joined: 14 Sep 2006 Posts: 1269 Location: Verona
|
Posted: Sun Sep 30, 2007 1:23 pm Post subject: |
|
|
ginsoak wrote: | La scheda è supportata (6200LE attualmente in commercio), e la versione di xorg-server installata è la più recente. |
Più recente vuol dire:
più recente stabile = 1.3.0.0
più recente = 1.4-r1
Mi risulta che i driver binari nvidia non supportino ancora correttamente xorg 7.3 (ovvero xorg-server-1.4). |
|
Back to top |
|
|
ginsoak Tux's lil' helper
Joined: 10 Feb 2005 Posts: 139 Location: Berlin
|
Posted: Sun Sep 30, 2007 1:29 pm Post subject: |
|
|
Più recente, stabile, quindi 1.3.0.0 |
|
Back to top |
|
|
regisinferni n00b
Joined: 30 Sep 2007 Posts: 26
|
Posted: Sun Sep 30, 2007 6:12 pm Post subject: |
|
|
Quote: |
Mi risulta che i driver binari nvidia non supportino ancora correttamente xorg 7.3 (ovvero xorg-server-1.4). |
I 100.14.19 supportano perfettamente xorg 7.3, e quindi la 1.4-r1. Testati personalmente sulla mia pelle
Comunque hai provato a dare un seguito da un ? |
|
Back to top |
|
|
ginsoak Tux's lil' helper
Joined: 10 Feb 2005 Posts: 139 Location: Berlin
|
Posted: Mon Oct 01, 2007 7:29 am Post subject: |
|
|
Il modulo si carica correttamente. |
|
Back to top |
|
|
|