Couldn´t write audio cd´s

[sterni]

Hi!

my problem is that i couldn't write audio cds. ISO Images work, but when I make:
(cdrdao freese the whole system after the power calibration)
The effect is the same with -dummy

cdrecord dev=0,4,0 -v -nofix -audio -swab -pad -speed=1 01.wav

scsidev: '0,4,0'
scsibus: 0 target: 4 lun: 0
Linux sg driver version: 3.1.24
Cdrecord 1.11a39 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.7'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'PHILIPS '
Identifikation : 'CDD3600 CD-R/RW '
Revision : '2.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET
Drive buf size : 786432 = 768 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 42 MB (04:10.56) no preemp pad
Total size: 42 MB (04:10.57) = 18793 sectors
Lout start: 42 MB (04:12/43) = 18793 sectors
Current Secsize: 2048
ATIP start of lead in: -12369 (97:17/06)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 341056
Starting to write CD/DVD at speed 1 in real TAO mode for single session.
Last chance to quit, starting real write in 9 seconds....
Waiting for reader process to fill input buffer ... cdrecord: Input/output error. mode select g1: scsi sendcmd: no error
CDB: 55 10 00 00 00 00 00 00 44 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 28 00 05 B2 A8 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 0.016s timeout 40s
cdrecord: Warning: using default CD write parameter data.
Mode Select Data 00 10 00 08 00 00 00 00 00 00 08 00 05 32 01 00 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cdrecord: Cannot open new session.
input buffer ready.
Writing time: 0.085s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

[schoett]

I have exactly the same problem. Trying to write an audio-CD to my Philips OEM SCSI CD-RW, I get the same error as you.

Did you find a solution?

[sterni]

Sorry. I have stil the same error. The only additional
information I have is that some people with the philipps
drive could use the cdrdao. I know that I used the drive to burn audio
cd´s with redhat 6.2 so it must be something related to "updates"
to syslibs or cdrecord or libscg

So I´m still interested in tips (in the moment i use a dual boot
to evil_win)

bye

[schoett]

I managed to copy an audio CD with cdrdao as follows:

[Pipe]

Hey,
is here a solution available? I have actually the same problem. I have a Philips CDD 5301.

The output from #cdrecord -scanbus is fine. Under windows 2000 the burner works fine (read CD & DVD, burn CD´s). I can mount the burner with a normal CD and read from device under linux. That´s ok.

Only when i try to burn a CD, the burner is blocked. I can´t open the tray or do a #eject /mnt/cdrom / umount /mnt/cdrom. I habe this tried with the devices-files too. The same.

When i do a #cdrecord -scanbus again cdrecord do not a output in the terminal. It hangs. I think the bus or the burner is not more present in the system. Why?

When i close the burnprogram the burner do furthermore blinking the LED on the front panel.

Only a reboot do unlock the tray and give the inside CD free. On the CD is nothing. I all case.

I need help! Thanks.

Greetings Pipe
_________________
==> plz visit www.PAX-Studios.de & @Quakenet #PAX-Studios