| View previous topic :: View next topic |
| Author |
Message |
jiojio74
n00b
Joined: 12 Jan 2007
Posts: 24
|
 Posted: Thu Jul 05, 2007 7:15 pm Post subject: SB Audigy2 ZS Platinum Pro l'uscita cuffie non va |
 |
|
La scheda in questione ha un box esterno con tanti bei jack fra cui quello per le cuffie, ma è misteriosamente muto.
Ho giocato con tutti i volumi di alsamixer ma nulla.
Qualche suggerimento? |
|
| Back to top |
|
 |
djinnZ
Advocate
Joined: 02 Nov 2006
Posts: 4831
Location: somewhere in L.O.S.
|
| Posted: Fri Jul 06, 2007 6:51 pm Post subject: |
|
|
1 in make.conf settare ALSA_CARDS secondo il tuo modello (dovrebbe essere emu10k1x) ed aggiornare
2 cerca qui, forse la funzione surround è configurata di default in qualche modalità che esclude la cuffia
se hai ancora dubbi devi fornire informazioni, ovvero l'output di lspci e di dmesg relativi all'audio e come hai configurato la scheda nel kernel.
_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt
mala tempora currunt...mater stultorum semper pregna est 
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist |
|
| Back to top |
|
|
jiojio74
n00b
Joined: 12 Jan 2007
Posts: 24
|
| Posted: Sat Jul 07, 2007 9:38 am Post subject: |
|
|
Ho provato a dare un occhio al link sul surround, ma non ho capito come possa essermi utile. I canali del surround funzionano correttamente, se attacco le cuffie a quelli vanno tranquillamente, ma io mi riferisco ad un jack dedicato che si trova sul box esterno che è peggio che muto: quando attacchi un jack in genere si sente della statica mentre lo inserisci anche se il volume è a 0, ma in questo caso non si sente nulla, come se non fosse neanche alimentato. Eppure il led che indica se il box è alimentato è acceso.
Qui:
http://www.alsa-project.org/alsa-doc/index.php?vendor=vendor-Creative_Labs#matrix
| Quote: | Sound Blaster Audigy2 ZS Platinum Pro emu10k2
CA0151/P16V Details (emu10k1) |
Dice di usare emu10k1
Questo lspci:
| Code: | 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
00:08.0 RAID bus controller: Promise Technology, Inc. PDC20376 (FastTrak 376) (rev 02)
00:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
00:0e.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
00:0e.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
00:0e.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
|
E dmesg:
| Code: | Linux version 2.6.20-gentoo-r8 (root@michael) (gcc version 4.1.2 (Gentoo 4.1.2)) #4 Fri Jul 6 17:49:27 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001fefc000 end: 000000001fffc000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001fffc000 size: 0000000000003000 end: 000000001ffff000 type: 3
copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4
copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Entering add_active_range(0, 0, 131068) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131068
early_node_map[1] active PFN ranges
0: 0 -> 131068
On node 0 totalpages: 131068
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125981 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6490
ACPI: RSDT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x1fffc000
ACPI: FADT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2
ACPI: BOOT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x1fffc030
ACPI: MADT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x1fffc058
ACPI: DSDT (v001 ASUS A7V8X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Detected 1350.173 MHz processor.
Built 1 zonelists. Total pages: 130045
Kernel command line:
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513136k/524272k available (3824k kernel code, 10536k reserved, 1358k data, 252k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
vmalloc : 0xe0800000 - 0xfffb5000 ( 503 MB)
lowmem : 0xc0000000 - 0xdfffc000 ( 511 MB)
.init : 0xc0612000 - 0xc0651000 ( 252 kB)
.data : 0xc04bc1f7 - 0xc060fc30 (1358 kB)
.text : 0xc0100000 - 0xc04bc1f7 (3824 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2702.37 BogoMIPS (lpj=4502993)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(TM) XP 2200+ stepping 00
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0005) - 330 Objects with 46 Devices 114 Methods 15 Regions
ACPI Namespace successfully loaded at root c06ac330
evxfevnt-0089 [02] enable : Transition to ACPI mode successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1ad0, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:.................................................
Initialized 15/15 Regions 2/2 Fields 21/21 Buffers 11/11 Packages (339 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 49 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14) *9
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region e400-e47f claimed by vt8235 PM
PCI quirk: region e800-e80f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Enabling device 0000:00:07.0 (0094 -> 0097)
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 17 (level, low) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[ed800000-ed8007ff] Max Packet=[2048] IR/IT contexts=[8/8]
PCI: Enabling device 0000:00:0e.2 (0014 -> 0016)
ACPI: PCI Interrupt 0000:00:0e.2[B] -> GSI 18 (level, low) -> IRQ 17
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[eb000000-eb0007ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: ee000000-efdfffff
PREFETCH window: eff00000-f7ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with ACLs, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800000a5381]
ieee1394: Host added: ID:BUS[1-01:1023] GUID[00023c0141002f4f]
floppy0: no floppy controllers found
loop: loaded (max 8 devices)
b44.c:v1.01 (Jun 16, 2006)
PCI: Enabling device 0000:00:09.0 (0004 -> 0006)
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 17
eth0: Broadcom 4400 10/100BaseT Ethernet 00:e0:18:b3:a2:a9
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
PCI: Enabling device 0000:00:0b.0 (0014 -> 0017)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
eth1: RTL8169s/8110s at 0xe0872000, 00:06:4f:3e:eb:6c, IRQ 18
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: Unable to derive IRQ for device 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC35L090AVV207-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 160836480 sectors (82348 MB) w/1821KiB Cache, CHS=16383/255/63<6>hda: hw_config=600b
, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.002.
Fusion MPT base driver 3.04.03
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.03
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 19
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 19, io mem 0xea000000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 19, io base 0x0000a400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 19, io base 0x0000a000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 19, io base 0x00009800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
input: PC Speaker as /class/input/input3
input: ImExPS/2 Generic Explorer Mouse as /class/input/input4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Time: tsc clocksource has been installed.
UDF-fs: No VRS found
XFS mounting filesystem hda2
Ending clean XFS mount for filesystem: hda2
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 252k freed
PCI: Enabling device 0000:00:0e.1 (0004 -> 0005)
gameport: EMU10K1 is pci0000:00:0e.1/gameport0, io 0xa800, speed 1242kHz
libata version 2.00 loaded.
sata_promise 0000:00:08.0: version 1.05
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 17 (level, low) -> IRQ 16
sata_promise PATA port found
ata1: SATA max UDMA/133 cmd 0xE0884200 ctl 0xE0884238 bmdma 0x0 irq 16
ata2: SATA max UDMA/133 cmd 0xE0884280 ctl 0xE08842B8 bmdma 0x0 irq 16
ata3: PATA max UDMA/133 cmd 0xE0884300 ctl 0xE0884338 bmdma 0x0 irq 16
scsi0 : sata_promise
ata1: SATA link down (SStatus 0 SControl 0)
scsi1 : sata_promise
ata2: SATA link down (SStatus 0 SControl 0)
scsi2 : sata_promise
ata3.00: ATA-6, max UDMA/100, 241254720 sectors: LBA48
ata3.00: ata3: dev 0 multi count 0
ata3.01: ATA-6, max UDMA/100, 241254720 sectors: LBA48
ata3.01: ata3: dev 1 multi count 0
ata3.00: configured for UDMA/100
ata3.01: configured for UDMA/100
nvidia: module license 'NVIDIA' taints kernel.
scsi 2:0:0:0: Direct-Access ATA IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: Attached scsi disk sda
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:1:0: Direct-Access ATA IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
SCSI device sdb: 241254720 512-byte hdwr sectors (123522 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 241254720 512-byte hdwr sectors (123522 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:1:0: Attached scsi disk sdb
sd 2:0:1:0: Attached scsi generic sg1 type 0
PCI: Enabling device 0000:00:0e.0 (0004 -> 0005)
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 16
ALSA /var/tmp/portage/media-sound/alsa-driver-1.0.14_rc2-r1/work/alsa-driver-1.0.14rc2/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c:1477: Installing spdi
f_bug patch: Audigy 2 ZS [2001]
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
usbcore: registered new interface driver hci_usb
ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
ReiserFS: sdb1: using ordered data mode
ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb1: checking transaction log (sdb1)
ReiserFS: sdb1: Using r5 hash to sort names
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
Adding 1004020k swap on /dev/hda1. Priority:-1 extents:1 across:1004020k
r8169: eth2: link up
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
br0: port 2(eth2) entering learning state
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 2(eth2) entering forwarding state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
NET: Registered protocol family 10
eth2: no IPv6 routers present
br0: no IPv6 routers present
eth0: no IPv6 routers present
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
r8169: eth2: link down
br0: port 2(eth2) entering disabled state
r8169: eth2: link up
br0: port 2(eth2) entering learning state
br0: topology change detected, propagating
br0: port 2(eth2) entering forwarding state
r8169: eth2: link down
br0: port 2(eth2) entering disabled state
r8169: eth2: link up
br0: port 2(eth2) entering learning state
br0: topology change detected, propagating
br0: port 2(eth2) entering forwarding state
|
La scheda non è compilata nel kernel, ma caricata come modulo dai driver alsa (emerge alsa-driver), ma prima era compilato nel kernel direttamente, ovviamente nessun cambiamento.
Qui i parametri in /etc/modules.d/alsa:
| Code: | alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
alias snd-card-0 snd-emu10k1
alias sound-slot-0 snd-emu10k1
|
Ho provato anche ad aggiungere:
| Code: | | options snd-emu10k1 index=0 extin=0x3fcf extout=0x1fcf enable_ir=1 |
o
| Code: | | options snd-emu10k1 index=0 extin=0x3fff extout=0x1fff enable_ir=1 |
Ma non cambia nulla. |
|
| Back to top |
|
|
djinnZ
Advocate
Joined: 02 Nov 2006
Posts: 4831
Location: somewhere in L.O.S.
|
| Posted: Sat Jul 07, 2007 11:55 am Post subject: |
|
|
| jiojio74 wrote: | Ho provato a dare un occhio al link sul surround, ma non ho capito come possa essermi utile. I canali del surround funzionano correttamente, se attacco le cuffie a quelli vanno tranquillamente, ma io mi riferisco ad un jack dedicato che si trova sul box esterno che è peggio che muto: quando attacchi un jack in genere si sente della statica mentre lo inserisci anche se il volume è a 0, ma in questo caso non si sente nulla, come se non fosse neanche alimentato. Eppure il led che indica se il box è alimentato è acceso.
|
Devi definire tutti i canali altrimenti il mixer non riesce ad abilitarli e con ogni probabilità la tua uscita cuffie è disabilitata o è assegnata a qualcosa di strano (tipo i laterali del 7.1 ma è meno probabile) che di norma non ricevono alcun suono.
dai uno sguardo in /proc/asound per capire cosa c'è e come è definito.
_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt
mala tempora currunt...mater stultorum semper pregna est
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist |
|
| Back to top |
|
|
jiojio74
n00b
Joined: 12 Jan 2007
Posts: 24
|
| Posted: Sat Jul 07, 2007 12:52 pm Post subject: |
|
|
Hum... mi sapresti dare qualche dritta su cosa cercare o una guida che spieghi come è fatta quella struttura? Mi sono bellamente perso. C'è un sacco di roba lì sotto e parecchia non so leggerla.
Una cosa che ho trovato di strano è questa:
| Code: | # cat /proc/asound/card0/emu10k1
EMU10K1
Card : Audigy
Internal TRAM (words) : 0x2000
External TRAM (words) : 0x0
[cut]
Captured FX Outputs :
Output 32 [FXBUS2_0]
Output 33 [FXBUS2_1]
Output 34 [FXBUS2_2]
Output 35 [FXBUS2_3]
Output 36 [FXBUS2_4]
Output 37 [FXBUS2_5]
Output 38 [FXBUS2_6]
Output 39 [FXBUS2_7]
Output 40 [FXBUS2_8]
Output 41 [FXBUS2_9]
Output 42 [FXBUS2_10]
Output 43 [FXBUS2_11]
Output 44 [FXBUS2_12]
Output 45 [FXBUS2_13]
Output 46 [FXBUS2_14]
Output 47 [FXBUS2_15]
All FX Outputs :
Output 00 [Digital Front Left]
Output 01 [Digital Front Right]
Output 02 [Digital Center]
Output 03 [Digital LEF]
Output 04 [Headphone Left]
Output 05 [Headphone Right]
Output 06 [Digital Rear Left]
Output 07 [Digital Rear Right]
Output 08 [Front Left]
Output 09 [Front Right]
Output 10 [Center]
Output 11 [LFE]
Output 12 [???]
Output 13 [???]
Output 14 [Rear Left]
Output 15 [Rear Right]
Output 16 [AC97 Front Left]
Output 17 [AC97 Front Right]
Output 18 [ADC Caputre Left]
Output 19 [ADC Capture Right]
Output 20 [???]
Output 21 [???]
Output 22 [???]
Output 23 [???]
Output 24 [???]
Output 25 [???]
Output 26 [???]
Output 27 [???]
Output 28 [???]
Output 29 [???]
Output 30 [???]
Output 31 [???]
Output 32 [FXBUS2_0]
Output 33 [FXBUS2_1]
Output 34 [FXBUS2_2]
Output 35 [FXBUS2_3]
Output 36 [FXBUS2_4]
Output 37 [FXBUS2_5]
Output 38 [FXBUS2_6]
Output 39 [FXBUS2_7]
Output 40 [FXBUS2_8]
Output 41 [FXBUS2_9]
Output 42 [FXBUS2_10]
Output 43 [FXBUS2_11]
Output 44 [FXBUS2_12]
Output 45 [FXBUS2_13]
Output 46 [FXBUS2_14]
Output 47 [FXBUS2_15]
Output 48 [FXBUS2_16]
Output 49 [FXBUS2_17]
Output 50 [FXBUS2_18]
Output 51 [FXBUS2_19]
Output 52 [FXBUS2_20]
Output 53 [FXBUS2_21]
Output 54 [FXBUS2_22]
Output 55 [FXBUS2_23]
Output 56 [FXBUS2_24]
Output 57 [FXBUS2_25]
Output 58 [FXBUS2_26]
Output 59 [FXBUS2_27]
Output 60 [FXBUS2_28]
Output 61 [FXBUS2_29]
Output 62 [FXBUS2_30]
Output 63 [FXBUS2_31]
|
è normale che ci siano righe come questa:
n.b.: l'ho tagialto un pò |
|
| Back to top |
|
|
skypjack
l33t
Joined: 05 Aug 2006
Posts: 884
Location: Italia - Firenze
|
| Posted: Sun Jul 08, 2007 12:14 pm Post subject: |
|
|
Io ho avuto un problema col jack per le casse/auricolari aul mio laptop.
So che è una cosa diversa, però se posso dirti avevo intrapreso la via software e non ne venivo fuori ...
Il problema? Hardware!
Non ci avrei mai creduto, fino a che non mi è capitato!  |
|
| Back to top |
|
|
unarana
Tux's lil' helper
Joined: 05 Mar 2004
Posts: 120
Location: Erice (TP) Italy
|
| Posted: Mon Jul 09, 2007 2:06 pm Post subject: |
|
|
Il pannello anteriore dell'Audigy2 Zs riceve solo segnali digitali dalla scheda audio tramite il connettore AD_EXT, quindi non credo sia imputabile ad una "rottura" hardware se tutto il resto funziona correttamente.
Prova ad aggiornare tutti i pacchetti alsa a ~x86 (o alla versione testing della tua piattaforma se diverso da x86), visto che la scheda è relativamente nuova e a modificare /etc/modules.d/alsa così:
| Code: | # ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-emu10k1
# module options should go here
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
|
Come consigliato nell'Alsa-doc per la Sound Blaster Audigy2 ZS Platinum Pro http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Creative+Labs&card=Sound+Blaster+Audigy2+ZS+Platinum+Pro.&chip=emu10k2%2C+CA0151%2FP16V&module=emu10k1
Ciao 
_________________
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
Linus Torvalds |
|
| Back to top |
|
|
djinnZ
Advocate
Joined: 02 Nov 2006
Posts: 4831
Location: somewhere in L.O.S.
|
| Posted: Mon Jul 09, 2007 5:55 pm Post subject: |
|
|
Se non ricordo male gli ??? corrispondono a canali rilevati ma non identificati/bili.
Per vedere in modo più umano le cose dai uno sguardo nei vari card0/pcmvattelappesca nelle relative subdir sub0 c'è un info ed uno status che ti indicano in quale condizione sono.
In ogni caso una prova con altro os giusto per vedere se funziona la farei.
Vedi che la statica che in genere si sente quando attacchi il jack in una uscita non proviene dalla scheda ma dal bus (che sui pc è tra i più rumorosi) o dall'alimentatore che si scarica sul case.
_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt
mala tempora currunt...mater stultorum semper pregna est
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist |
|
| Back to top |
|
|
jiojio74
n00b
Joined: 12 Jan 2007
Posts: 24
|
| Posted: Mon Jul 23, 2007 9:50 am Post subject: |
|
|
Ho provato un p� di tutto. Mi manca di installare windows su quella macchina e le ho provate tutte. Ho smontato la scheda e messa su un altro pc con windows e va.
Oggi per� cercando altro mi sono imbattuto in questo:
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg18878.html
da notare questa affermazione:
| Quote: | | > I think, there is only one more control "Headphone". |
Giusto quello che mi servirebbe. Ma non ho la pi� pallida idea di come si usa: ld10k1, ne ho trovato un granch� di documentazione.
Ho emerso alsa-tools e provato a dare:
| Code: | # init_audigy
Error: unable to connect ld10k1
Error: unable to connect ld10k1
|
Poi ho provato con
Ma mi si blocca con un bel aborted (ora non posso riportare cosa succede perch� ho inchiodato alsasound e non posso riavviare  )
Ad ogni modo: qualcuno sa dove trovare qualche info a riguardo?
Riavviato:
| Code: | # ld10k1
*** glibc detected *** ld10k1: double free or corruption (out): 0x080713b8 ***
======= Backtrace: =========
/lib/libc.so.6[0xb7df1d72]
/lib/libc.so.6(__libc_free+0x87)[0xb7df33e7]
ld10k1[0x80525b1]
======= Memory map: ========
08048000-08056000 r-xp 00000000 03:02 336757481 /usr/sbin/ld10k1
08056000-08057000 rw-p 0000e000 03:02 336757481 /usr/sbin/ld10k1
08057000-08087000 rw-p 08057000 00:00 0 [heap]
b7c00000-b7c21000 rw-p b7c00000 00:00 0
b7c21000-b7d00000 ---p b7c21000 00:00 0
b7d82000-b7d8c000 r-xp 00000000 03:02 170131652 /usr/lib/gcc/i686-pc-linux-gnu/ 4.1.2/libgcc_s.so.1
b7d8c000-b7d8d000 rw-p 00009000 03:02 170131652 /usr/lib/gcc/i686-pc-linux-gnu/ 4.1.2/libgcc_s.so.1
b7d8d000-b7d8f000 rw-p b7d8d000 00:00 0
b7d8f000-b7eaf000 r-xp 00000000 03:02 68237195 /lib/libc-2.5.so
b7eaf000-b7eb0000 r--p 00120000 03:02 68237195 /lib/libc-2.5.so
b7eb0000-b7eb2000 rw-p 00121000 03:02 68237195 /lib/libc-2.5.so
b7eb2000-b7eb5000 rw-p b7eb2000 00:00 0
b7eb5000-b7ec8000 r-xp 00000000 03:02 68237094 /lib/libpthread-2.5.so
b7ec8000-b7ec9000 r--p 00012000 03:02 68237094 /lib/libpthread-2.5.so
b7ec9000-b7eca000 rw-p 00013000 03:02 68237094 /lib/libpthread-2.5.so
b7eca000-b7ecc000 rw-p b7eca000 00:00 0
b7ecc000-b7ece000 r-xp 00000000 03:02 68237049 /lib/libdl-2.5.so
b7ece000-b7ed0000 rw-p 00001000 03:02 68237049 /lib/libdl-2.5.so
b7ed0000-b7ef3000 r-xp 00000000 03:02 68237043 /lib/libm-2.5.so
b7ef3000-b7ef5000 rw-p 00022000 03:02 68237043 /lib/libm-2.5.so
b7ef5000-b7fae000 r-xp 00000000 03:02 338343214 /usr/lib/libasound.so.2.0.0
b7fae000-b7fb3000 rw-p 000b8000 03:02 338343214 /usr/lib/libasound.so.2.0.0
b7fb3000-b7fb4000 rw-p b7fb3000 00:00 0
b7fcc000-b7fcd000 r-xp b7fcc000 00:00 0 [vdso]
b7fcd000-b7fe7000 r-xp 00000000 03:02 68237132 /lib/ld-2.5.so
b7fe7000-b7fe8000 r--p 00019000 03:02 68237132 /lib/ld-2.5.so
b7fe8000-b7fe9000 rw-p 0001a000 03:02 68237132 /lib/ld-2.5.so
bf85d000-bf873000 rw-p bf85d000 00:00 0 [stack]
Aborted
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
