View previous topic :: View next topic |
Author |
Message |
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Sun Jul 01, 2007 6:52 pm Post subject: poblema DMA [RISOLTO] |
|
|
Salve, volevo togliermi una curiosità:
non so come mai, se è un problema di configurazione o altro, ma per fare un esempio, se mi guardo un filmato con gentoo, certe volte scatta come se non ce la facesse, questo non solo mentre guardo filmato, ma in generale quando uso gnome. E' un problema che posso risolvere?
La mia configurazione hardware è la seguente:
Cpu amd athlon Xp2000+
512 MB di ram
Geforce 4 mx 64 mb
anche se sinceramete credo che siano piu che sufficienti :p
Last edited by Karhot87 on Wed Jul 04, 2007 4:38 pm; edited 1 time in total |
|
Back to top |
|
|
randomaze Bodhisattva
Joined: 21 Oct 2003 Posts: 9985
|
Posted: Sun Jul 01, 2007 10:16 pm Post subject: Re: Gentoo lento |
|
|
Karhot87 wrote: | se mi guardo un filmato con gentoo, certe volte scatta come se non ce la facesse, questo non solo mentre guardo filmato, ma in generale quando uso gnome. |
A occhio si tratta di un problema di DMA sul disco o di dri nella condigurazione di X11.
cosa restituiscono i comandi:
Code: |
$ hdparm -i /dev/hda
|
(ovviamente al posto di hda devi mettere l'HD su cui lavori....) e
Code: |
$ glxinfo | grep direct
|
_________________ Ciao da me! |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 7:31 am Post subject: |
|
|
Questi sono i risultati:
# hdparm -i /dev/hda
/dev/hda:
Model=Maxtor 6Y060L0, FwRev=YAR41VW0, SerialNo=Y2SHL1HE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
# glxinfo | grep direct
direct rendering: Yes |
|
Back to top |
|
|
masterbrian Guru
Joined: 13 Feb 2004 Posts: 461
|
Posted: Mon Jul 02, 2007 7:45 am Post subject: |
|
|
Ciao,
potresti postare anche la configurazione del tuo xorg.conf?
Dici che il problema ti si presenta principalmente con gnome, xke' ad esempio sotto kde o altro windowmanager non succede? che player usi? a tutto schermo?
Ciao _________________ [img:f6b0c3bcba]http://www.danasoft.com/sig/MasterBrian.jpg[/img:f6b0c3bcba] |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 7:57 am Post subject: |
|
|
In un installazione precedente avevo kde, e il problema si presentava pure con kde. Questo è il mio xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "GLcore"
Load "glx"
Load "record"
Load "dri"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV18 [GeForce4 MX 440 AGP 8x]"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
Option "AddARGBGLXVisuals" "true"
Option "AllowGLXWithComposite" "1"
Option "RenderAccel" "1"
Option "NoRenderExtension" "0"
Option "XAANoOffscreenPixmaps" "1"
EndSection
Section "Extensions"
Option "Composite"
EndSection
EndSection
Section "dri"
Mode 0666
EndSection |
|
Back to top |
|
|
crisandbea Veteran
Joined: 03 Jul 2005 Posts: 1778 Location: BOSCO (SA) ... ma domiciliato a Bologna....
|
Posted: Mon Jul 02, 2007 8:31 am Post subject: |
|
|
@Karhot87
per i prossimi post utilizza il tag code, per rendere più leggibile gli output che ti vengono richiesti.
posta un Code: | cat /var/log/Xorg.0.log | grep WW |
ed un Code: | cat /var/log/Xorg.0.log | grep EE |
ciao |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 8:37 am Post subject: |
|
|
Ecco i risultati,
Code: |
[b]# cat /var/log/Xorg.0.log | grep WW[/b]
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(WW) NVIDIA(0):
(WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(WW) NVIDIA(0): will be used as the requested mode.
(WW) NVIDIA(0):
(WW) NVIDIA(0): No size information available in CRT-1's EDID; cannot compute
(WW) NVIDIA(0): DPI from EDID.
(WW) NVIDIA(0): Option "AGPMode" is not used
(WW) NVIDIA(0): Option "AGPFastWrite" is not used
(WW) NVIDIA(0): Option "EnablePageFlip" is not used
(WW) NVIDIA(0): Option "XAANoOffscreenPixmaps" is not used |
e
Code: |
[b] # cat /var/log/Xorg.0.log | grep EE[/b]
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER |
grazie |
|
Back to top |
|
|
masterbrian Guru
Joined: 13 Feb 2004 Posts: 461
|
Posted: Mon Jul 02, 2007 10:33 am Post subject: |
|
|
Karhot87 wrote: | In un installazione precedente avevo kde, e il problema si presentava pure con kde. Questo è il mio xorg.conf
|
Quindi ti funziona bene sotto windows e sotto gentoo no? se usi windowsmediaplayer c'e' impostata (se non ricordo male) di default l'opzione frameskip, per cui le immagini sembrano piu' fluide. Hai provato ad abilitare il frameskip anche x il player ke usi sotto gentoo? _________________ [img:f6b0c3bcba]http://www.danasoft.com/sig/MasterBrian.jpg[/img:f6b0c3bcba] |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 10:47 am Post subject: |
|
|
Sotto gentoo uso kplayer, ma non va lento solo quando uso un player, ma anche se uso mldonkey, pure un gioco come warcraft scatta abbastanza. Cmq non ho provato ad abilitare frameskip.
Non so se centra qualcosa ma non riesco ad abilitare il dma dell'hard disck, mi dice
Code: |
hdparm -d 1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
|
ho lanciato un :
Code: | lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0b.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
00:0c.1 Input device controller: Creative Labs SB Live! Game Port (rev 0a)
00:0d.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2)
|
e credo che devo caricare il moduo VT82xxxxx, giusto?? ma lo devo compilare nel kernel??[/code] |
|
Back to top |
|
|
lucapost Veteran
Joined: 24 Nov 2005 Posts: 1419 Location: <ud|me|ts> - Italy
|
Posted: Mon Jul 02, 2007 11:21 am Post subject: |
|
|
Qual'è la tua architettura? amd64? anche io ho problemi di "lentezza con gnome", ho verificato che disattivando il demone hald il problema non si verifica...se ne parla fda qualche parte anche sul forum internazionale... _________________ LP |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 11:26 am Post subject: |
|
|
Io ho un amd athlon xp 2000+, ma mi andava lento pure kde, credo sia solo un problema di confifurazione, almeno spero |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 11:45 am Post subject: Problema dma |
|
|
Salve, non riesco ad abilitare il dma per il mio hard disk, quando lancio
Code: |
# hdparm -d 1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
|
dal risultato di
Code: | lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0b.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
00:0c.1 Input device controller: Creative Labs SB Live! Game Port (rev 0a)
00:0d.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) |
ho abilitato il supporto Via vt82cxxx e l'opzione di abilitare il dma quando possibile, ma non funge ugualmente!!! |
|
Back to top |
|
|
MeMyselfAndI l33t
Joined: 15 Nov 2005 Posts: 784 Location: Between the monitor and the chair
|
Posted: Mon Jul 02, 2007 1:12 pm Post subject: |
|
|
prova a postare un hdparm -iI /dev/hda, ti da un po di informazioni sulle modalita' di trasferimento dati supportate dal tuo hard disk. |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 1:20 pm Post subject: |
|
|
Code: | # hdparm -iI /dev/hda
/dev/hda:
Model=Maxtor 6Y060L0, FwRev=YAR41VW0, SerialNo=Y2SHL1HE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
ATA device, with non-removable media
Model Number: Maxtor 6Y060L0
Serial Number: Y2SHL1HE
Firmware Revision: YAR41VW0
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 0
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 120103200
device size with M = 1024*1024: 58644 MBytes
device size with M = 1000*1000: 61492 MBytes (61 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0000)
Recommended acoustic management value: 192, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_VERIFY command
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
SET_MAX security extension
* Automatic Acoustic Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct |
|
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 1:38 pm Post subject: |
|
|
Ho provato con una live, e ovviamente funziona benissimo, il dma è ia attivo, cosa devo configurare?? |
|
Back to top |
|
|
crisandbea Veteran
Joined: 03 Jul 2005 Posts: 1778 Location: BOSCO (SA) ... ma domiciliato a Bologna....
|
Posted: Mon Jul 02, 2007 1:54 pm Post subject: |
|
|
Karhot87 wrote: | Ho provato con una live, e ovviamente funziona benissimo, il dma è ia attivo, cosa devo configurare?? |
immagino che hai attivato tale supporto nel kernel vero????
posta magari un Code: | cat /usr/src/linux/.config | grep DMA |
hai abilitato il giusto supporto nel kernel per il tuo disco???
ciao |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 2:09 pm Post subject: |
|
|
Code: | # cat /usr/src/linux/.config | grep DMA
CONFIG_GENERIC_ISA_DMA=y
CONFIG_ISA_DMA_API=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_PDC_ADMA is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# DMA Engine support
# CONFIG_DMA_ENGINE is not set
# DMA Clients
# DMA Devices
|
credo sia abilitato giusto? |
|
Back to top |
|
|
crisandbea Veteran
Joined: 03 Jul 2005 Posts: 1778 Location: BOSCO (SA) ... ma domiciliato a Bologna....
|
Posted: Mon Jul 02, 2007 2:24 pm Post subject: |
|
|
questi sono quelli che io ho abilitato:
Code: |
cat /usr/src/linux/.config | grep DMA | grep -v \#
CONFIG_GENERIC_ISA_DMA=y
CONFIG_ISA_DMA_API=y
CONFIG_DMA_ENGINE=y
CONFIG_NET_DMA=y
CONFIG_INTEL_IOATDMA=y
|
ciao |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 2:52 pm Post subject: |
|
|
Ho provato a cambiarli ma non funge |
|
Back to top |
|
|
crisandbea Veteran
Joined: 03 Jul 2005 Posts: 1778 Location: BOSCO (SA) ... ma domiciliato a Bologna....
|
Posted: Mon Jul 02, 2007 3:10 pm Post subject: |
|
|
Karhot87 wrote: | Ho provato a cambiarli ma non funge |
che librerie per il tuo hdd stai usando ??? ovvero le vecchie ATA, o le nuove SATA/PATA, o entrambe????
ciao |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 3:38 pm Post subject: |
|
|
Credo che uso le api , credo questi sono le voci abilitate nel kernel
│ Code: | ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │
│ │ <*> ATA/ATAPI/MFM/RLL support │ │
│ │ <*> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support │ │
│ │ --- Please see Documentation/ide.txt for help/info on IDE drives │ │
│ │ [ ] Support for SATA (deprecated; conflicts with libata SATA driver) │ │
│ │ [ ] Use old disk-only driver on primary interface │ │
│ │ <*> Include IDE/ATA-2 DISK support │ │
│ │ [*] Use multi-mode by default │ │
│ │ <*> PCMCIA IDE support │ │
│ │ <*> Include IDE/ATAPI CDROM support │ │
│ │ < > Include IDE/ATAPI TAPE support (EXPERIMENTAL) │ │
│ │ < > Include IDE/ATAPI FLOPPY support │ │
│ │ < > SCSI emulation support │ │
│ │ [*] IDE Taskfile Access │ │
│ │ --- IDE chipset support/bugfixes │ │
│ │ <*> generic/default IDE chipset support │ │
│ │ [ ] CMD640 chipset bugfix/support │ │
│ │ [*] PCI IDE chipset support │ │
│ │ [ ] Sharing PCI IDE interrupts support │ │
│ │ [ ] Boot off-board chipsets first support │ │
│ │ <*> Generic PCI IDE Chipset Support │ │
│ │ < > OPTi 82C621 chipset enhanced support (EXPERIMENTAL) │ │
│ │ < > RZ1000 chipset bugfix/support │ │
│ │ [ ] Generic PCI bus-master DMA support │ │
│ │ |
|
|
Back to top |
|
|
crisandbea Veteran
Joined: 03 Jul 2005 Posts: 1778 Location: BOSCO (SA) ... ma domiciliato a Bologna....
|
Posted: Mon Jul 02, 2007 3:47 pm Post subject: |
|
|
qui direi che non sono abilitate le vecchi librerie Quote: |
│ │ [ ] Support for SATA (deprecated; conflicts with libata SATA driver) |
usi molto probabilmente e spero le libata SATA, che sono queste
Code: |
Serial ATA (prod) and Parallel ATA (experimental) drivers ---> |
verifica che il chip abilitato sia proprio quello del tuo Hdd.
ciao |
|
Back to top |
|
|
Karhot87 Tux's lil' helper
Joined: 26 Apr 2007 Posts: 137 Location: Poggio Murella (GR) ma studio a Roma
|
Posted: Mon Jul 02, 2007 4:04 pm Post subject: |
|
|
Allora ho provato ad bilitare
Code: | [ ] Support for SATA (deprecated; conflicts with libata SATA driver) |
e Code: |
Serial ATA (prod) and Parallel ATA (experimental) drivers ---> |
hoinseritoil mio cip che è via... giusto?
ma non funge
dove sbaglio?? |
|
Back to top |
|
|
Onip Advocate
Joined: 02 Sep 2004 Posts: 2912 Location: Parma (Italy)
|
Posted: Mon Jul 02, 2007 4:08 pm Post subject: |
|
|
hai ricompilato il kernel, messo l'immagine in boot e riavviato col kernel nuovo? _________________ Linux Registered User n. 373835
Titus Lucretius Carus, De Rerum Natura - Tantum religio potuit suadere malorum |
|
Back to top |
|
|
crisandbea Veteran
Joined: 03 Jul 2005 Posts: 1778 Location: BOSCO (SA) ... ma domiciliato a Bologna....
|
Posted: Mon Jul 02, 2007 4:13 pm Post subject: |
|
|
Karhot87 wrote: | Allora ho provato ad bilitare
Code: | [ ] Support for SATA (deprecated; conflicts with libata SATA driver) |
e Code: |
Serial ATA (prod) and Parallel ATA (experimental) drivers ---> |
hoinseritoil mio cip che è via... giusto?
ma non funge
dove sbaglio?? |
spero che non le hai abilitate entrambe, o l'una o l'altra, per sapere il cip del tuo hdd dal risultato del tuo lspci:
Code: |
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) |
che utilizzando la vecchia libreria SATA,
dovresti configurare cosi :
Code: |
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
|
ciao |
|
Back to top |
|
|
|