beerisgoodmate
Tux's lil' helper
Joined: 20 May 2005
Posts: 129
|
 Posted: Sun Mar 18, 2007 6:38 am Post subject: Getting DTV1000 remote to work. |
 |
|
I have a leadtek DTV1000 T PCI digital tuner card.
| Code: | 02:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
02:07.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
|
I have the card itself working fine, but am trying to get the remote working. The receiver that comes with the cad plugs into the PCI card.
I followed the patch instructions as per here:
http://daniel.saunders.googlepages.com/howto.html#WinFastDTV1000RemoteControlWithMythTV
The reciever turns up in dmesg:
| Code: | input: cx88 IR (WinFast DTV1000-T) as /class/input/input4
|
And in cat /proc/input/devices
| Code: | I: Bus=0001 Vendor=107d Product=665f Version=0001
N: Name="cx88 IR (WinFast DTV1000-T)"
P: Phys=pci-0000:02:07.2/ir0
S: Sysfs=/class/input/input4
H: Handlers=kbd event4
B: EV=100003
B: KEY=10afc336 2150a48 0 0 0 404 80010000 190 40004801 1e0000 4400 100000 10000ffc |
I have lirc installed and working and the remote works somewhat. i.e. key presses generate the correct response from irw, but the problem is that this only happens 50% of the time the rest of the time nothing happens.
I don't think it is lirc as running cat /dev/input/event4 also gives intermittent responses to button presses.
I have tried gentoo-sources-2.6.19-r5 and 2.6.20-gentoo-r2
The writer of the howto has it working under KnoppMyth 2.6.18-chw-13
Any ideas on how to get this remote working correctly?
Thanks
edit:
Tired knoppmyth, and it works.
Sad to delete my Gentoo installation though  |
|
Kernel & Hardware
