| View previous topic :: View next topic |
| Author |
Message |
canduc17
l33t
Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy
|
 Posted: Tue May 22, 2007 8:55 pm Post subject: In /dev non c'è il masterizzatore [Risolto] |
 |
|
Problemi col masterizzatore: in /dev non esiste!
Mentre se faccio partire il cd d'installazione Gentoo 2007.0, /dev/hde corrisponde al masterizzatore, sul mio sistema appena installato, questo, non esiste...
Ho un LG GSA-H42L RET, con interfaccia EIDE ATAPI.
Mi sembra di aver compilato correttamente il kernel: | Code: | <*> ATA/ATAPI/MFM/RLL support
<*> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
<*> Include IDE/ATA-2 DISK support
[*] Use multi-mode by default
<*> Include IDE/ATAPI CDROM support
<*> generic/default IDE chipset support
[*] PCI IDE chipset support
[*] Sharing PCI IDE interrupts support
<*> Generic PCI IDE Chipset Support
[*] Generic PCI bus-master DMA support
[*] Use PCI DMA by default when available
<*> Intel PIIXn chipsets support |
e configurato bene /etc/fstab: | Code: | | /dev/cdrom /mnt/cdrom iso9660 auto,ro,user,canduc 0 0 |
Cosa ho combinato allora?
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Last edited by canduc17 on Wed May 23, 2007 9:45 am; edited 1 time in total |
|
| Back to top |
|
 |
djinnZ
Advocate
Joined: 02 Nov 2006
Posts: 4831
Location: somewhere in L.O.S.
|
| Posted: Tue May 22, 2007 9:14 pm Post subject: Re: In /dev non c'è il masterizzatore |
|
|
non saprei ma per me hde è il primo disco del primo canale del secondo controller PATA. Non ti sarai scordato qualcosa? 
Un controller, un "max ide interfaces" ...
_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt
mala tempora currunt...mater stultorum semper pregna est 
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist |
|
| Back to top |
|
|
canduc17
l33t
Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy
|
| Posted: Wed May 23, 2007 6:50 am Post subject: |
|
|
Sicuramente qualche cavolata l'ho fatta...ma sono sicuro che nel livecd, il lettore cdrom è identificato da /dev/hde.
Ho provato a montarlo e funziona...
Come si chiamato i moduli a cui fai riferimento, che controllo?
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito) |
|
| Back to top |
|
|
misterwine
Guru
Joined: 14 Nov 2005
Posts: 341
Location: Zelarino (VE)
|
| Posted: Wed May 23, 2007 7:08 am Post subject: |
|
|
ide-cd e cdrom dovrebbero essere
_________________
"Se in un primo momento l' idea non è assurda,
allora non c'è nessuna speranza che si realizzi." (A.Einstein) |
|
| Back to top |
|
|
canduc17
l33t
Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy
|
| Posted: Wed May 23, 2007 7:12 am Post subject: |
|
|
Non ho trovato i moduli che dici con il search di menuconfig.
Ma sta roba non l'ho abilitata con i moduli postati sopra?
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito) |
|
| Back to top |
|
|
Scen
Retired Dev
Joined: 29 Jul 2003
Posts: 2470
Location: Padova, Italy
|
| Posted: Wed May 23, 2007 7:22 am Post subject: |
|
|
Probabilmente non hai abilitato il supporto al controller IDE della tua scheda madre, dov'è collegato il masterizzatore. Penso sia utile se postassi l'output di lspci.
_________________
I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny |
|
| Back to top |
|
|
canduc17
l33t
Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy
|
| Posted: Wed May 23, 2007 7:29 am Post subject: |
|
|
| Code: | candesktop canduc # lspci
00:00.0 Host bridge: Intel Corporation Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation SATA Controller 1 IDE (rev 02)
00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation SATA Controller 2 IDE (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0193 (rev a2)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown device 4364 (rev 12)
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
05:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
05:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 14) |
Il mio controller IDE dovrebbe essere questo ed è abilitato: | Code: | Symbol: ATA_PIIX [=y]
Prompt: Intel PIIX/ICH SATA support
Defined at drivers/ata/Kconfig:43
Depends on: ATA && PCI
Location:
-> Device Drivers
-> Serial ATA (prod) and Parallel ATA (experimental) drivers
-> ATA device support (ATA [=y]) |
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito) |
|
| Back to top |
|
|
djinnZ
Advocate
Joined: 02 Nov 2006
Posts: 4831
Location: somewhere in L.O.S.
|
| Posted: Wed May 23, 2007 8:31 am Post subject: |
|
|
| canduc17 wrote: | | Code: |
00:1f.2 IDE interface: Intel Corporation SATA Controller 1 IDE (rev 02)
00:1f.5 IDE interface: Intel Corporation SATA Controller 2 IDE (rev 02)
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
|
|
Come volevasi dimostrare. Devi abilitare anche Jmicron (poco più sotto) e se non funziona prova max-ide-interfaces a 8.
_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt
mala tempora currunt...mater stultorum semper pregna est
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist |
|
| Back to top |
|
|
IlGab
Guru
Joined: 26 Nov 2004
Posts: 486
|
| Posted: Wed May 23, 2007 8:33 am Post subject: |
|
|
Secondo me se fai un e ti scorri lenamente le critte con la <barra spaziatrice> nei messaggi di boot vedi come viene identificato il tuo lettore.
Probabilmente fai prima con | Code: | | dmesg | grep -A 5 -B 5 CD-ROM |
dovresti avere un output del tipo:
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM SONY DVD+-RW DW-Q58A UDS2 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
E puoi identificare a che device è associato il lettore (nel mio caso sr0) |
|
| Back to top |
|
|
canduc17
l33t
Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy
|
| Posted: Wed May 23, 2007 9:44 am Post subject: |
|
|
Ok, mi mancava Jmicron.
Dopo averlo abilitato il mio masterizzatore è apparso sotto /dev/hda.
E anche k3b funziona a meraviglia! 
Grazie a tutti!
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito) |
|
| Back to top |
|
|
|
Forum italiano (Italian)
