gust4voz Retired Dev
Joined: 09 Sep 2003 Posts: 373 Location: Buenos Aires, Argentina
|
Posted: Tue Apr 03, 2007 9:06 pm Post subject: READ, IT's IMPORTANT: gentoo-sources-2.6.20-r4 going stable |
|
|
I'm doing gentoo-sources-2.6.20-r4 stable as i write this.
It has many bugfixes and improvements, off the top of my head:
* Niagara stability greatly improved
* Improved alsa driver for snd-sun-cs4231 (specially for SBUS machines)
* atyfb should properly handle blade 100/150 again, even with gcc4
* Lots of alignment fixes
* E450 wouldn't boot with newer kernels
* Heavy-load NFS oops
Caveats:
Users of Qlogic ISP2xxx FC-AL based machines (most notably Blade 1000, 2000, Fire 280R) shouldn't use any kernel >2.6.17 just yet until genkernel is fixed to handle firmware loading in initramfs. On the tech side this involves patching a newer busybox with the gentoo bits and adding the firmware loading mdev patch for it (we don't use udev in initramfs - otherwise it would be easier).
We are shipping this kernel stable anyway since we never recommended using genkernel for building kernels so this is a new step that will be required for those machines anyway.
I'll be looking into getting the genkernel bits rolling in the next couple of days time willing.
Thanks for your attention. _________________ Gustavo Zacarias
Gentoo/SPARC monkey |
|